pneumatic punching machine used for sale

Manufacturer: Butler Model: Elgamill TE 4000 Condition: Used Type of Machine: Horizontal Bed-Type Milling Machine Plate Size: 4340 × 1000 Table Size: 1000 × 1000 Control System: Siemens 810 M Spindle Hub: 480 × 360 Tool Holder Spaces: 130 Travel (X, Y, Z): 4000 × 1600 × 1000 Max Weight: 10500 kg Find more here - / Contact us at -

Manufacturer: Reiden Model: BFSH Condition: used Type of Machine: Horizontal Bed-Type Milling Machine Plate Size: 3200 × 1000 Table Size: 1000 × 1000 Control System: Heidenhain TNC 1550 Spindle Hub: 350 × 350 Tool Holder Spaces: 130 Travel (X, Y, Z): 3000 × 1000 × 800 Max Weight: 5000 kg Find more here - / Contact us at -

Philips Practix 400 mobile X-ray machine with Varian RAD 68 0.6/1.2 tube • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg, Germany. It is packed on pallets, professionally lashed and wrapped in stretch film and can be picked up immediately • You buy the system in "IST" condition from the warehouse Freiberg (EXW), Saxony, Germany, and prepayment. • The sale is made as "Used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite being fully functional without warranty. • The installation, commissioning and configuration of the system or plant components must be carried out by the manufacturer or by a specialist or technician authorized by the manufacturer! • The offer is subject to prior sale.

Manufacturer: Scharmann Model: FB 140 Condition: Used Type of Machine: Horizontal Table Boring Machine Plate Size: 1630 × 1300 Table Size: - Control System: Digital Display Spindle Hub: 140 Tool Holder Spaces: - Travel (X, Y, Z): 2000 × 1400 × 1400 Max Weight: 10000 kg Additional Notes: Equipped with Plan Disc Ø700. Find more here - / Contact us at -

Herma 752C labeller Serial: 80002791 2019, Stainless, Herma H400 labeller, on height adjustable frame, conveyor dimensions 1100mm x 230mm, with Zodiac HS printer and touch screen, with wiring diagram, 1Ph

Key data: 2040 mm, 1 mm

with rebate groove in the upper shaft, with steel wheel and scale, solid, stable construction, with wire inserts, 70 mm feed of the rear roller, Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out. Sheet width: 2040 mm Sheet thickness: 1.0 mm Colour: green Machine weight: 600 kg Dimensions: 2200 x 650 mm Diameter:. 70 mm Machine number: 8413105

Vibrator 2 tubs WALTHER TROWAL type TA 2/145 Internal tub dimensions: L 840 mm x W 360 mm x Depth 470 mm Coating in good condition Loading from the top Unloading of parts through the front traps Functional machine Voltage: 380 V Dimensions (L x W x H): 2600 x 2000 x 1300 mm Weight: approx 4 T

cutting angle: 90 ° cutting length: 150 x 150 mm work height max.: 900 mm table:: 1000 x 650 mm engine output: 3,0 kW weight: 900 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Specifications: Working length: 3240 mm Bending capacity steel: 4.0 mm Bending capacity stainless steel: 3.0 mm Bending capacity aluminum: 8.0 mm CNC control: SIEMENS Simatic HMI Bending angle adjustment: 0 – 150° Upper beam opening: 350 mm Infinitely variable bending speed Programmable Backstop Hydraulic upper tool clamping Motor power: 7.5 kW Dimensions (length x width x height9: approx. 5000 x 2450 x 2200 mm Weight: approx. 7 to

Specifications: Working length: 4060 mm Bending capacity: 3.0 mm Control with bending simulation: MULTIBEND 901 grafik 2D Automatic adjustment of the bending angle depending on material thickness Bending angle adjustment: 0 – 180° Backgauge motorized adjustable: 10 -1500 mm Max. opening bending beam: 300 mm Bending and lower beam adjustment range : 80 mm Motor power: 7.5 kW Dimensions (length x width x height): approx. 5500 x 4050 x 2600 mm Weight: approx. 6.8 tons

Specifications: Working length: 3050 mm Max. bending power: 30.0 mm Max. bending capacity length 1500 mm: 42 mm Bend: 25.0 mm Diameter upper roller: 460 mm Diameter lower roller: 460 mm Number of driven rollers: 3 hydraulic snap roller bearing Engine power: 37 kW Dimensions (length x width x height): approx. 5850 x 2550 x 2650 mm Weight: approx. 30 tons Note: Compact design, therefore low space requirement Parts of the hydraulics installed under the machine

Specifications: Working length: 2550 mm Max. bending power: 6.0 mm Bend : 4.0 mm Diameter upper roller: 176 mm Diameter lower roller: 176 mm Control panel with digital display Motor power: 7.5 kW CE mark Dimensions (length x width x height): approx. 4000 x 1400 x 1500 mm Weight: approx. 3.6 tons Note: the machine was used exclusively for straightening coated aluminum sheets Rollers were wrapped in foil, which was removed without leaving any residue Condition of the rollers almost as good as new few operating hours

Specifications: Working width: 1050 mm Max. bending power: 100.0 mm Max. bend: 80.0 mm Diameter upper roller: 530 mm Diameter of side rollers: 530 mm Conical bending device by inclined position of the two side rollers Mobile control panel with digital display Engine power: 37 kW Hydraulic Safety Chucks CE mark Net weight: approx. 16 tons Auxiliary: 2. Roller set : Diameter upper roller: 360 mm Diameter of side rollers: 360 mm

Specifications: hydr. Four Roll Round Bending Machine Working width: 4000 mm Max. bending power: 10.0 mm Max. bend: 8.0 mm Diameter upper roller: 305 mm Diameter of side lower rollers: 305 mm Diameter middle lower roller: 265 mm Conical bending device by inclined position of the two side rollers Hardened rollers Hydraulic Safety Chucks Lateral bending aid on the right side Mobile control panel Dimensions (length x width x height): approx. 7300 x 1600 x 1600 mm Net weight: approx. 17 tons

Fastback Model 15XS Binding device / binding machine - used The machine is without defects and in very good condition. With book parking angle - Automatic tying settings such as spine width, tying time, contact pressure, temperature - Bindings from 3 to 350 sheets (80 g/m²) with three different fastback binding strips - Format DIN A5 // DIN A4 - 25 kg / 230 volts / instruction manual. - Test run / shipping / pick-up all possible.

For sale is a used bottle washer from the manufacturer PAC Swiss. The machine was used in a small bottling plant until the end and ran there without any problems. Specifications: Manufacturer: PAC Swiss Model: CB 14-0.5-R-6.5 LII Compact Year: 2003/2004 Capacity: 8,000 bph (min: 4,000 bph, max. 10,000 bph) Bottle type: 0.33 Ltr, 0.5 Ltr. - Bottles per row: 14 - Machine is frequency-controlled via a FU (conversion took place about 5 years ago - Machine is made entirely of stainless steel Please inquire for further data.

For sale is a bottle cleaning machine from the manufacturer MAG. The machine is fully functional and runs without any problems. The system has been regularly serviced and is ready for immediate use. Specifications: - Manufacturer: MAG – Schymanski - Type designation: E-SPLX 12-D - Year of construction: 1998 - Capacity: approx. 5,000 bph -Wreath: 0.50 l Euro bottle 0.50 l NRW bottle 0.50 l swing-top bottle 0.33 l gourmet bottle 0.33 l longneck bottle 0.33 l Vichy bottle - Material: complete V²A - Equipment: continuous operation – rotating spray shafts - Water softening system

Key data: 50 t, 270 mm, 850 mm

Electric horizontal bending machine HorizOne 50 with spindle drive from CoastOne in Finland. 500kN pressing force thanks to precise and low-maintenance spindle drive with servo motor and servo controller. Simple, intuitive programming with the proven CoastOne TC12-2D controller. Automatically controlled side stop for convenient machining of your sheet metal parts from single part production to series production.

Manufacturer: Econo-Pak Type: FA-KT Year of Make: 2003 Condition: good Inclusive: - 1-head folding carton display WVE-DR-R Hotmelt (2 adhesive spots) - Angle capper - SIMATIC OP7 HMI - Nordson Hotmelt 3400V-2GAV4D/R Hot Melt Machine incl. Hand Glue Gun - Handheld control unit - Videojet 2-line for coding - 3 stamp formats / sets available: 188 x 150 x 50 mm // 188 x 140 x 90 mm // 189 x 150 x 140 mm WITHOUT checkweigher Folding carton conveyors

Key data: 450 mm, 63 , 25

Screw diameter: 25 mm Displacement: 69 cm³ Injection weight in polystyrene: 63 g/hp Injection pressure: 2,400 bar Clamping force: 45 t tie-barless Tool installation height min.: 175 mm Opening distance: 355 mm CONTROL: CC200 Screen text: german / german Instruction manual: german / german Sprue picker er/usp Pump drive power: 11 kW Total connected load: 17.8 kW Total weight: 3,300 kg Dimensions L x W x H: 3.3 x 1.2 x 2.0 m m m Payment terms: 100% before taking over the machine, net only

Key data: 40 kg, 1100 mm, 630 mm

Stock number: 3973 BALANCING MACHINE Manufacturer: SCHENCK, Type: R 2 N Machines NO.: ARD 0537, Year of manufacture: 1974 Specifications: Max. diameter 630 mm mm Max. tool weight 0.3 - 40 kg. Max. workpiece length 1100 mm Steuerung New Control VMI APT Balancing Spindle speed 450 - 1800 rpm Length: 1300 mm, Height: 1200 mm, Width: 500 mm, Weight: 800 kg

Collating Machine TMF N14 1990 14 Stations Collating Machine Size A3 7 Stations Collating Machine Size A2 Panel Operation and Controls double-sheet and no-sheet control Pre-set counter - Full receiving Tray + Böwe Stitcher-Folder-Trimmer combination + Transport Channel K5 + Stitcher H5 + Folder F5 + Front Edge Trimmer S5 + Delivery Module A5 available: immediately in production location: Germany

Inv. Num. : 8153 Type: OP3 Producer: Hauser Generated: Parameters: Work table length: 595 mm Work table width: 320 mm Maximum spindle speed: 3000 1/min X-axis travel: 400 mm Y-axis travel: 250 mm Travel Z axis: 400 mm Spindle diameter: 130 mm Machine height: 1800 mm Machine length: 1350 mm Machine width: 1300 mm Machine weight: 1500 kg Equipment: DRO

Year: 2018 - technically efficient, ready to work - after full service - motor: 2.2 kW - automatic hydro-pneumatic feed - pneumatic profile clamping - quick cutter change system - cooling-lubrication installation

Kemper Dough Weigher - Consul ET - Year 2001 - Stainless steel cladding - a chamber - Large hopper - Long conveyor belt, foldable - with flour sprinkler - Speed adjustable Height: 140cm Width: 190cm Depth: 65cm

Diosna Spiral Mixer Type: SP 120 D 2 analogue timers 2 speeds Spiral stainless steel Stainless Steel Boiler Flour dust cover for 75kg flour or 120kg dough on castors with brakes 380V 50Hz Overhauled and repainted Height: 125cm Width: 85cm Depth: 130cm

Used machine CNC cutter/plotter cutting surface in X and Y: 3,500 x 2,100 mm Multifunctional CAM cutting system in CNC knife technology for the 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials. Equipment of the used machine: • 1 cutting bridge and 1 multifunction tool head The machine is sold with a driven round knife and a punching tool. Mu3Vqs • Multifunction tool head for holding 2 interchangeable tools • Powerful vacuum blower for fixing the material • Equipped with grey conveyor table (conveyor) as standard. Green-blue exchange conveyor possible (offers high contrast for dark materials) Other tools can be expanded (on request): • EOT electric oscillating knife • POT pneumatic oscillating knife • PRT driven round blade • UCT universal knife (drawing knife) • KCT Kiss-Cut Tool  ...

Hammer C3-31 5-speed station wagon Year of construction 2024 With sliding table 2000mm Boom table 1100 with telescopic Length stop 1200mm swivel -45° 400V 3 kW (4 HP) 3 motors Degree Grid Index System Saw blade 250-315mm (without saw blade) Cutting height of 100mm Swivel: 90°-45° Parallel cutting width of 600mm Planing width of 310mm Planing fence can be swivelled 90° to 45° Dressing table length of 1400mm 3 Knife Automatic Planing Shaft Passage height from 4-225mm Thickness table length of 540mm Milling machine: 90° rigid Milling machine: 3000/6000/8000 and 10000 rpm Useful height 100mm Weight approx. 550 kg G&2992-o1852

Kemper Spiral Mixer Type: ST 75 A - overhauled and repainted – 2 automatic timer switching on and off – 2 speeds slow and fast – with 3 stainless steel boilers – Vats are locked by means of a hand crank – Stainless steel boiler and spiral – Bowl diameter inside 76cm Shell height inside 44cm – with flour dust cover – square head -Boiler capacity approx. 175 liters

Kemper Spiral Mixer Type: ST 75 A - overhauled and repainted – 2 automatic timer switching on and off – 2 speeds slow and fast – with 2 stainless steel boilers – Vats are locked by means of a hand crank – Stainless steel boiler and spiral – Bowl diameter inside 76cm Shell height inside 44cm – with flour dust cover – square head -Boiler capacity approx. 175 liters

Rego Herlitzius Type: Rotec 350 Circular knife Year of construction 2010 Cutting width: 3 – 25mm completely made of stainless steel for loaves max 3250mm length on casters tested and cleaned Stock level: 2 pieces

Inv. Num. : 8161 Type: RSO 32 Producer: Reinhardt Created: 2008 Parameters: The machine is in good condition.

Inv. Num. : 8160 Type: VWL 1200 Producer: MSA Created: 2015 Parameters: Axis X: 1300 mm Axis Z: 1000 mm Max. spindle speed: 500 1/min Inner diameter: 250-1400 mm Number of axes: 3 Length: 3800 mm Width: 3390 mm Height: 4400 mm Weight: 12000 kg

Universal plan and boring head ISO - 50 recording

Gear hobbing machine PFAUTER 1200mm, modul 12, with change gears

Stock number: 3975 PROCESSING Manufacturer: CHEVALIER, Type: 2040 VMC Machine NO.: MC925B02, Year of manufacture: 2003 Specifications: Table size 1200 x 450 mm Longitudinal movement (X) 1020 mm Transverse movement (Y) 500 mm Vertical movement (Z) 500 mm Spindle Taper 40 ISO Stepless spindle speeds 8000 rpm Spindle motor 7.5 Kw Total power 15 KVA Tool changer 20 places Control Fanuc 0M Fabr. Operating hours spindle 4032 hours Length: 2350 mm, Height: 2650 mm, Width: 2750 mm, Weight: 5800 kg

Height 1950 mm Width 1800 mm Length 1500 mm Weight 1400 kg Power supply: 400V 50Hz 3N Total power 18 kW Loading Loading integrated into the machine Description Vacuum filler Handtmann VF 622 in a set with a grinder GD 93-3

Wood Chipper, Wood shredder 18 KW Opening 600 x 800mm

Key data: 7 , 230 mm, 160 mm

SPECIFICATIONS: Maximum processing height: 160 mm Maximum machining width: 230 mm Length of inlet planer: 2100 mm Spindle diameter: 40 mm Number of Spindles: 7 (6 + 1 Universal) Grid table Shaft drive (3.7 kW) Self-braking motors Voltage: 380 V Spindle configuration: 1ST: BOTTOM (5.5 kW) 2ND: RIGHT (5.5 kW) 3.: LEFT movable (5.5 kW) 4TH: RIGHT (5.5 kW) 5TH: TOP (7.5 kW) 6TH: BOTTOM (7.5 kW) 7TH: UNIVERSAL SPINDLE 360° (7.5 kW)

Qty. 1 Second-hand slitting line for stainless steel – in storage Mfc.: SACMA Overhauled by CAMU Built: 1992 Dismantled: 2024 Coil weight: max. 27,000 kg at uncoiler, 10,000 kg at recoiler Coil internal diameter: 500 mm Speed: max. 140 m/min Double mandrel with centering side 2 cutting heads / shears with 180 mm diameter shafts New sheet metal tensioner Complete set of blades for stainless steel Ribbon turner on rail complete with scale Scrap baler

Standard equipment: Tapping device Control panel with OLED display Robust, high-quality drill head hood with ergonomically inclined front LED lighting Quickly adjustable and ergonomic drilling depth stop Stepless speed control via central rotary knob EMERGENCY STOP push button Thermal overload protection Spindle stop Drilling protection with electr. Hedge Connection cable with Schuko plug 3-year warranty for single-shift operation Continuous/normal drilling capacity (mm) 6/8 (in E335/ST60) Tapping capacity (pitch dependent) M5 Spindle B12 Drilling depth (mm) 60 Projection (mm) 220 Column diameter (mm) 70 Usable work surface (W x L) (mm) 300 x 250 T-slot size (arm), spacing (mm), dimension width (mm) Cross grooves, number 2, 14/26 Drill head height adjustment by hand Feed (mm/revolution) by hand Drilling depth stop ring (positive fit) Drilling depth indicator digi ...

Bous Cleaning system degreasing - The Bous Trowamat RL 200 CP V is a compact and efficient cleaning system designed for cleaning and degreasing smaller concrete tools and equipment, such as hand trowels, floats, and other handheld construction tools. It is part of Bous GmbH´s line of cleaning machines, which are widely used in the construction industry for maintaining and prolonging the life of equipment. Find more here - / Contact us at -

C.T.S. Gemini 8002 with simens Simatic and bar feeder The C.T.S. Gemini 802 is an industrial machine designed for precision cutting and processing of materials such as metal or plastic. Manufactured by C.T.S. (Cutting Technology Systems), the Gemini 802 model is known for its efficiency and accuracy in various industrial applications. Key Features: - Cutting Capacity: The Gemini 802 is equipped to handle a range of material sizes, providing versatility in cutting operations. - Automation: Incorporates automated features to enhance productivity and reduce manual intervention. - Precision: Designed to deliver high-precision cuts, ensuring minimal material waste and adherence to specified dimensions. Find more here - / Contact us at -

Key data: 2000 mm, 1300 mm

available Berstorff Bias Cutter Angle 0-50 degrees with manual splice 90 degree with automatic splice Ce certified Description attached!

Inv. Num. : 8171 Type: UDARA 10 Producer: WMW Created: GO 2019 Parameters: Wire diameter: 3-8 mm Cable length: 150-3000 mm Input power: 7.5 kW Machine weight: 1200 kg

Ultrasonic Banderolier ATS US 2000 AST-MDM; cleaned and tested; Frame size 900x750mm; Belt width 30mm; suitable for paper (also suitable for TruePaper paper) or foil; Meter reading 795,000 thousand; Compressed air required. Ultrasonic banding machine ATS US 2000 AST-MDM; cleaned and checked;  frame size 900x750mm; band width 30mm; used for paper (also for TruePaper material) or foil; counter 795,000; pressurized air needed.

as good as new H & G

Various flanges

used fat baking appliance Treif Pegasus, overhauled, 50 Hz, 400 V, 0.9 kW, control system has been renewed, completely in stainless steel version, weight: 168 kg

used bread slicer Schickart TS/38 plus, overhauled, 400 V, 0.75 kW