134,822 used machines on RESALE, but how to find them? Machine Search
Brand: PERA Model: PRESTIGE 12000 Type: pneumatic press with closed cage Tank capacity: 240 hL (24,000 liters) Material: airtight AISI 304 stainless steel tank, food-grade polyurethane membrane Electrical power: 16.5 kW Dimensions: length 8000 mm, width 2950 mm, height without extensions 2750 mm, set of feet height 1500 mm Unladen weight: 8500 kg Equipment: rotation programme of the cage controlled by filling, 2 pneumatic doors, 1 rectangular watertight door 600 x 800 mm with pneumatic opening, juice drain through internal drains, removable drains, manhole for access to the membrane, stainless steel juice drain Fittings: juice outlet Ø 100 pitch Mâcon with nut with ligating tip; pneumatic press on shut-off valve with 1\" 1/4 BSP female thread Description: horizontal pneumatic press on frame, stainless steel cage, blue drive housing, geared motor and PERA control cabinet integrated int ...
pressure: 8,5 kN stroke: 40 mm throat: 95 mm Working height from to: 95 - 240 mm table surface area: 160 x 110 mm spindle diameter: 25 mm weight of the machine ca.: 27 Kg dimensions: 160 x 230 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 4,5 kN stroke: 40 mm throat: 95 mm Working height from to: 95 - 240 mm table surface area: 160 x 110 mm spindle diameter: 25 mm weight of the machine ca.: 24 Kg dimensions: 160 x 230 mm Direct-acting pneumatic presses bring the full pressure performance over the entire stroke length. You will above all used when long-stroke parts are machined with constant force Need to become. Convincing technology • Long and precise spindle guide for maximum dimensional accuracy • Hardened and ground piston rod for practically unlimited service life • Double-acting cylinders with end position cushioning on both sides • Double guide rings in the piston, constant and quiet running • Oil resistant sealing elements Special features of the PND series • Spindle secured against twisting • Spindle return on the PND 85/S only via a cylinder chamber additional air savings • Easy, ...
Pressure power: 6-8 bar Air consumption: 8 l/Hub height of stroke: 12 mm : 134 mm no. of strokes: 400 Hub/min punching force max.: 3500 kp weight of the machine ca.: 80 kg Schüco pneumatic press for Schüco punching tools Art. No. Schüco: 290 124 manual included various pressing tools included! tool nr. 283073, 280162,299259,283492, 283072, 282867, 282644, 282663, 282868, 283071, 283072 2 quick-release levers for secure and quick fastening of the press tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
punching pressure: ca. 3,2 t air pressure: 8 bar stroke: max. 20 mm distance between columns: ca. 250 x 200 mm weight of the machine ca.: 52 kg incl. various tools, see pictures The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Clinch unit TOX - Pneumatic-Hydro Tox pressHydro-pneumatic press TOX Pressotechnik POWER PACKAGEType type CRS 03.62No.: 207599.2Year of construction approx. 2005Pressure capacity: max. 80 kN = 8 tonProjection: 20 mmInstallation height: 32 mm- Built-in clinch tool- pneumatic valve for control- Push-through joining or clinching- For making a form-fit connection of 2 sheets without perforating or heating the sheets- Mounted on the stand- with the simplest electrical control and Foot switchWeight: 230 kgComes from
CONTROLS electronic controls SCHMIDT PRESS FORCES total force (nominal): 0.25 to PRESS TABLE table surface (left-right): 180 mm table surface (front-back): 150 mm SLIDE slide force: 0.25 to stroke: 100 mm ELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 Hz DIMENSIONS / WEIGHTS total weight approx.: 35 kg This is an assembly press with force-displacement monitoring. • Operating hours: approx. 150 • Condition: very good, almost like new • Features: Press force monitoring, two-hand operation • Stroke: 100 mm • Tool dimensions: 150 x 100 mm • Press force: 0.25 tons
2 complete precision press systems are offered. Press force: 220kN, stroke: 100/12mm, operating pressure: 3/6bar, tool holder X/Y: approx. 350mm/300mm, safety distance: 355mm, overrun time: 0.07s, control system SCHMIDT PressControl 500: control type: PRC 500, incl. operating panel with display and keypad, two-hand control according to EN 574 Type III B. Accessories: machine frame with integrated safety device BGR 500 inspection, machine weight: 800kg, inspection possible by arrangement.
A pneumatic toggle press is offered. Press force: 4500kg, stroke: 40mm, throat depth: 125mm, working height: 60mm - 320mm. Pneumatic foot switch, piece counter, maintenance unit, mechanical height adjustment, base frame, T-slot table X/Y: 200mm/160mm. Weight: approx. 185kg, overall dimensions X/Y/Z: approx. 800mm/650mm/1850mm. Inspection possible by arrangement.
A pneumatic toggle press is offered. Press force: 4500kg, stroke: 40mm, throat depth: 125mm, working height: 60mm - 320mm. Machine frame, maintenance unit, mechanical fine adjustment, T-slot table X/Y: 200mm/160mm. Weight: approx. 180kg, overall dimensions X/Y/Z: approx. 800mm/600mm/1800mm. Inspection possible by arrangement.
pressure: 3,3 bei 6bar t dayligth: 250 mm stroke: 70 mm work stroke: 10 mm table surface area: 220x190 mm throat: 150 mm weight of the machine ca.: 350 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Offer 25418 Technical data: - Printing capacity approx. 110 kN - Working stroke approx. 50 mm - Power stroke 12 mm - Projection approx. 150 mm - Table size 280 x 180 mm - Installation height adjustment up to max. 300 mm - 2 Hand control - Air inlet 6 - 8 bar - Total - space requirement approx. W 600 x H 2500 x D 900 mm - Weight approx. 400 kg
Technical details Manufacturer: Brétaudeau Déposé Systèmes Model: 221 PBP Type: Pneumatic positioning / placement press workstation Year: 2011 Serial number: 73 Weight: 50 kg Actuation: Pneumatic Configuration: - Large flat work table - Pneumatic vertical actuator - Foot pedal control - Pressure regulator and gauge - Vacuum-assisted table system - Positioning spindle/tool head - Bench-mounted workstation design Application: - Label positioning - Patch placement - Embroidery positioning - Heat-transfer preparation - Garment component placement - Textile manufacturing operations Construction: - Steel workstation frame - Pneumatic control system - Integrated work surface Condition: Used, good industrial condition Observed condition: - Complete workstation present - Pneumatic circuit appears intact - Pressure gauges installed - Foot control present - Wor ...
Main characteristics : • Overall dimensions: LxWxH: 2200mm. x 650mm. x 1950mm.; • Designed for shaping sausages in the drying process; • Mobile performance: movement through 6 polyamide wheels; • The pressure on the product is exerted by pneumatic cylinders located at the top of the machine; • Determination of the pressure on the product is carried out by adjusting the pressure of the compressed air supplied to the cylinders; • Compressed air connection: 1/2" (quick connection with spiral hose);
Heavy-duty pneumatic gluing press with perforated sheet metal for flexible positioning of the press cylinders. One cylinder without a pressure shoe. Technical data: Pressing area: approx. 2,800 x 1,000 mm Width: 600 mm Height: 1,800 mm Press cylinders: 6 Condition: Gebraucht Location: Tauberbischofsheim, Germany
JOSSI DLP 450 HV / 80E-ZH ist eine pneumatische Presse, entwickelt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Arbeitskapazitäten: Ausladung/Tiefe 100 mm; nutzbare Fläche Länge 185 mm, Breite 145 mm. Technische Hauptangaben: Druckleistung 5 kN; Gesamtabmessungen Maschine L 400 × B 250 × H 730 mm. Ermöglicht enge Toleranzen und eignet sich für Branchen wie Automotive, Uhrmacherei, Werkzeugbau, Luftfahrt und Medizintechnik. Technische Daten ohne Gewähr
Serial number: 180 Operating pressure: 0.8 Mpa Air consumption: 5 l/stroke Stroke: 30 mm incl. matching accessories such as various tools Reference: Baumstark - Lot 41 Auction-ID: A7-49882-78
Pneumatic press / joining station TOX Pressotechnik with measuring system Complete pneumatic pressing or joining station from an industrial plant. Technical data: Machine / Construction: Manufacturer Press: TOX Pressotechnik Type: QS 008.030.100.12 Serial number: 340370.4067 Max. pressure: 10 bar Version: Vertical pressing station with stable steel construction Dimensions (approx.): 400 × 800 × 1850 mm (W × D × H) Assembly: Floor screw connection provided Measurement technology: Force sensor: Kistler type: 9232A SN: 5669499 Calibrated range: −300 ... +300 με Sensitivity: −77, 10 pC/με Year of construction sensor: 2020 Note: Quality-relevant application (marking available) Auction-ID: A7-49816-45
Suitable for compacting metal cans up to a maximum size of approximately 50x50x65cm there are no tools for loading this lot please note heavy machine! Total weight unknown Auction-ID: A1-47444-125
pneumatic Book Press Kokkelink BP 40 Pneumatische Buchpresse - pneumatic Book Press Kokkelink BP 40 1 Pressplatte / 1 Press Palte Pressfläche / Press Size max. 400 x 400mm Presshöhe / Press high max. 350mm Presshöhe stufenlos regelbar / Press high steppless adjustable Gewicht / Weight 250kg
pressure at min. stroke:3 t throat:150 mm stroke:- 39 mm distance table/ram, max. stroke up, adjustment up:200 mm table surface area:280 x 380 mm pressure at min. stroke:1,5 t no. of strokes with min. stroke:- 80 /min no. of strokes with max. stroke:- 50 /min hole in the table:45 mm table height over floor:790 mm ram surface:115 x 100 mm Required air-pressure:4 bar weight:0,2 t Dimensions (WxDxH):0,5 x 0,9 x 1,4 m
pressure at min. stroke:3 t throat:150 mm stroke:- 40 mm distance table/ram, max. stroke up, adjustment up:200 mm table surface area:280 x 250 mm pressure at max. stroke:1,5 t no. of strokes with min. stroke:- 80 /min no. of strokes with max. stroke:- 50 /min hole in the table:45 mm table height over floor:810 mm ram surface:115 x 100 mm Required air-pressure:4 bar weight:0,15 t Dimensions (WxDxH):0,7 x 0,8 x 1,4 m
pressure:15 t throat:250 mm stroke:95 mm no. of strokes:0 - 60 /min distance table/ram, max. stroke up, adjustment up:300 mm table surface area:440 x 300 mm hole in the table:45 mm table height over floor:780 mm table adjustable:100 mm ram surface:100 mm weight:1,1 t dimensions (WxDxH):0,7 x 1,2 x 1,7 m
pressure:5 t throat:150 mm stroke:40 mm no. of strokes:0 - 80 /min distance table/ram, max. stroke up, adjustment up:260 mm table surface area:340 x 270 mm hole in the table:45 mm table height over floor:780 mm table adjustable:120 mm ram surface:60 mm weight:0,3 t dimensions (WxDxH):0,4 x 0,8 x 1,4 m
Thread cutting capacity: M 3 - M 12 Speed: 400 rpm Air demand: 750 l/min Pressure: 6 - 7 bar Extension: 950 mm Standard accessories: Parallel arm Air motor 6 pcs safety slip couplings of your choice guide column with mounting flange Radial boom Maintenance Pneumatic oil for initial filling
Pneumatic valve DN 300 Manufacturer: Jaudt Dosiertechnik Maschinenfabrik GmbH Type: Varioschieber FSV Opening width mm: ø 350 Height mm: 130 Max.Working temp. ° C: 80 Operating pressure MPa: 0.6-1.0 maximum operating pressure MPa: 0 Control voltage V: -. Housing: one-piece cast housing in flange version the round face with coarse good Chicane Sealing: slide sheet implementation for with Adjustable stuffing seal Pressure piece from cast aluminium alloy Blade: Stainless steel 1.4301 Slide sheet: eccentric screws galvanized Finish: Stainless steel and aluminum parts blank Grey cast iron housing painted in RAL 9006 Steel parts zinc plated, 10 & #956; m Plate made of aluminium Housing material: Cast aluminium alloy (AlSi 10 mg) shock-proof up to 5 bar Flanschbohrbild: According to DIN 2501 PN 6 Packing material: ARAMIDE (Tmax 280 ° C) Operation: pneu ...
Rotary actuator DW100, DIN, F07/10, 8kt. 17, ATEX pneumatic, double acting Manufacturer: End fittings Type: ED621002/AX Serial No.: 534623 / 41977 According to Directive 94/9/EC (ATEX) The Max Media and ambient temperatures may following individual temperature classes Values do not exceed: 65 ° C at temperature class 6 80 ° C at temperature class 5
Single acting pneumatic actuator, type it 350 Spring Kit Nr. 4 Function: Federkraftschließend Manufacturer: El-o-matic (today: Emerson) Type: ES0350H1A04A00N0 Serial No.: 4220206001055 Pressure: maximum 8 bar (116 PSI) Max./min. temperature: 80 ° C / - 20 ° C Drives are as good as new, as they are still unused! New price: 563,84
Type ST-3 Working pressure 6 bar Tabletop dimensions 2000x900 mm Pneumatic cylinder D125x600 mm Min. height 320 mm Max. height 1280 mm Max. load 160 kg Weight 170 kg
Pneumatic conveying system for various types of powder, consisting of: feed hopper with lid and compressed air turbine vibrator (netter NCT 10), injector (Telschig 2' FOX 300-SCE-SS) and side channel compressor (Electric Sd 820, 7.5 kW, 9.0 m3/h, 420 mbar) with pressure limiting valve. Flow capacity: 375 kg/h, required conveying air: approx. 180 Nm3/h at 330 mbar.
Nail series: 34° paper collated Strip nails Wire diameter: 3.8-4.6 mm Nail length: 100-160 mm Working pressure: 5-8 bar Weight: 7.10 kg Magazine capacity: 72 nails + Paper collated Strip nails of 4.6 x 160 19200 piece (600 St / carton, 32 piece box, order No. 140037) Compressed air nail machine 1100 EUR, 19200 ships nails 640 EUR
Te Koop: Pneumatic of acuator ven keystone. Model: 790-036
Pneumatic 2 finger parallel gripper, PGN+ 160-1-SD, Schunk, used tested Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Used - top condition The part was purchased from a company's spare parts warehouse and is in very good and tested condition. Ensuring the function In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the seller, the goods can be returned within 2 weeks. We will refund the buyer only the product price paid to us. For these goods we have to exclude warranty claims of the buyer for improvement, exchange, subsequent delivery or also for updating in case of digital components. Also excluded is the liability for direct and indirect consequential damages. Our terms and conditions apply, see ...
Pneumatic 3-jaw gripper, 52.85.1. 630, Fibro, mint condition Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition The part was purchased from a company's spare parts warehouse, has never been used and is in mint condition. Ensuring the function In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the seller, the goods can be returned within 2 weeks. We will refund the buyer only the product price paid to us. For these goods we have to exclude warranty claims of the buyer for improvement, exchange, subsequent delivery or also for updating in case of digital components. Also excluded is the liability for direct and indirect consequential damages. Our terms and conditions apply, see our website. ...
Technical data: -For punching into SCHÃ?CO - profile systems - air consumption per stroke 18 l -Air inlet 8 bar -Space requirement approx. B H 700 x 1250 X 500 mm -Weight approx. 100 kg -with:-foot switch -Original - machine base
Dopel membrane pump 1 inch with suspended solid pre-separator Pneumatically operated, mounted on transport trolleys on a mobile-by-mobile vehicle. Technical data: Gear ratio: 1:1 Maximum capacity: approx. 197.6 l/min Discharge quantity per cycle: approx. 0.88 l Air connection: 1/2" Nominal suction side: 1" Nominal diameter print page: 1" Maximum operating pressure: 8.3 bar Max solid diameter: 3.3mm Weight: approx.10 kg Lukra pumps, basement pumps Special price
Manufacturer: Festo 4 Koilen with holder made of aluminium profiles and 4 rollers Hose condition: New for more data see also photos please.
Pneumatic riener for ship rivets Comes with the following accessories, 1 x impact bolt for round head 16 mm 1 x impact bolt for round head 22 mm
Pneumatic cylinder, air cylinder, pneumatic piston, air piston -Manufacturer: Festo, Standard cylinder type DSBC-40-250-PPSA-N3 -Stroke travel: 250 mm -Piston: Ø 40 mm -Piston rod: Ø 16 mm -Dimensions: 610/55/H55 mm -Weight: 2.2 kg
Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Manufacturer: Orsta, pneumatic cylinder A125-32x320 TGL 20744 -Stroke: 230 mm -Piston rod: Ø 32 mm, M20 x 1.5 -Dimensions: 610/155/H155 mm -Weight: 15.7 kg
Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Manufacturer: Festo, standard cylinder type DNC-40-80-PPV-A -Stroke: 80 mm -Piston: Ø 40 mm -Piston rod: Ø 16 mm/M12 x 1.25 -Price: per piece -Number: 2 piece -Dimensions: 240/55/H87 mm -Weight: 1.3 kg/piece
Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 250 mm -Piston rod: Ø 38 mm -Dimensions: 168/168/575 mm -Weight: 18.4 kg
Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder -Manufacturer: Cavazzuti, pneumatic stamp -Stroke: 360 mm -Cylinder: Ø 85 mm -Piston rod: Ø 18 mm -Number: 6x cylinders available -Price: per piece -Dimensions: 230/120/H540 mm -Weight: 10.3 kg/piece
Pneumatic cylinders, air cylinders, pneumatic rams, air rams, compact cylinders -Pneumatic cylinder: ZIDP 200/100 -Stroke: 100 mm -Piston diameter: 200 mm -Piston rod: Ø 40 mm -Dimensions: 220/220/H450 mm -Weight: 23.5 kg
Pneumatic cylinder, air cylinder, pneumatic piston, air piston -Manufacturer: Festo, Standard cylinder type DNU-80- -Stroke travel: 500 mm -Piston: Ø 80 mm -Piston rod: Ø 25 mm/M20x1.5 -Dimensions: 765/95/H95 mm -Weight: 7 kg
Pneumatic cylinder, air cylinder, pneumatic piston, air piston -Manufacturer: Martonair Type SM/040 400 -Stroke distance: 400 mm -Piston: Ø 100 mm -Piston rod: Ø 32 mm -Dimensions: 690/112/H112 mm -Weight: 11.4 kg
Pneumatic cylinder, flat cylinder, pneumatic drive, stamp, flat cylinder -Stroke: 1070 mm -Piston rod: Ø 20 mm -Pneumatic damping: adjustable on both sides -Price: per piece -Number: 2 pieces -Dimensions: 1250/100/H45 mm -Weight: 7.4 kg/piece
maximum number of results exceeded
please refine your search
500 € 
