pneumatic cylinder used for sale

Pneumatic swivel module FESTO DSM - 40 - 270 - P - CC 161749 p max 10 bar New ! Dimensions: 170 x 130 x 130 mm

Compressed air lubricator STANKO B44-163 p: 10 kg/cm² ( approx. 10 ba r) Connections: G1 ( inch ) Installation length: 103 mm Oil tank colour: yellow or clear New ! Dimensions: 270 x 105 x 85mm

Pneumatic clamp GenusTech, JOUCOMATIC MPL25EDEP N°: 99712 New ! Dimensions: 450 x 200 x 70 mm

Directional Control Valve with Pneumatic Swing Actuator AMG / ROTELMANN SAD 002 Twin- Torque 0° / 180° 112670 8 bar 05-2033-591/0004 PN 6 DN 4 used, tested ! Dimensions: 200 x 130 x 50 mm

Pneumatic component FIBRO GSA 23679AA70 Stop. pneum. D50x10 New ! Dimensions: 160 x 80 x 60 mm

Flanged Ball Valve Pneumatic AMG SAF 25 NC DN50 PN10

pneumatic control valve, diaphragm valve, through-hole control valve, valve with stroke actuator SAMSON type 3241 02 1 4581 P481 4581 DN 100 PN 16 kvs 100 flange: Ø 220 mm stainless steel ! drive type 3271 01 700 H: 30 F 0.4 - 2 V 0.8 - 2.4 Dimensions: 350 x 220 x 680 mm

Ball valve pneumatic STEINEBRONN Industrietechnik VALBIA DA 63 DN25 PN25

Flanged ball valve pneumatic STEINEBRONN DN50 PN16 Dimensions 40x26x25 cm weight 21 kg

Ball valve with valve actuator pneumatic BAR PKO-1/0-I-025-D055 32105306 DN25 PN40 New ! Dimensions: 130 x 180 x 60 mm

pneumatic actuator, pneumatic actuator, pneumatic actuator SAMSON Type 2780 2780-1110131.00 stroke: 12 mm p: max 4 bar New ! Dimensions: 170 x 170 x 120 mm

Pneumatic wrenches, rod wrenches, pneumatic straight wrenches, BOSCH 0 607 454 224 ( 0607454224 ) 3.4 Nm 640 rpm 6.3 bar used, tested ! Dimensions: 245 x 45 x 35 mm

Flange ball valve electro-pneumatic SODECO pneumatic actuator ADA 20 double-acting Operating pressure: 8 bar Control voltage: 24 V DN25 PN16 Dimensions: 260 x 200 x 200 mm

Pneumatic grinder, pneumatic straight grinder WMW type 1508 10500 rpm grinding wheel diameter: Ø 80 mm used, tested ! Dimensions: 500 x 80 x 80 mm

Flange ball valve electro-pneumatic SODECO pneumatic actuator ADA 40 double-acting Operating pressure: 8 bar Control voltage: 24 V PN16 DN40 Dimensions: 310 x 200 x 200 mm

Spring-balanced BOSCH 0 607 454 224 ( 0607454224 ) 3.4 Nm 640 rpm 6.3 bar balancer: TECNA 9200 load capacity: 0.4 - 0.8 kg extension: 1,350 mm used, tested ! Dimensions: 320 x 230 x 150 mm

Refer to code 1185 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Pneumatic grinder, pneumatic straight grinder WMW type 1804 17000 rpm grinding wheel diameter: Ø 50 mm with approx. 1.6 m connection hose used, tested ! Dimensions: 330 x 50 x 80 mm

Zebra110pax4 label printer and pneumatic stamp. RA2315 Printer manufacturer: Zebra Printer type 110pax4 Control panel: LCD display with status display and buttons on printer, manual control panel on the side and control via PLC I/O Print type: Thermal transfer printing or direct thermal printing selectable Interfaces: Ethernet/control cable Print media: Standard media, tags and RFID media (reading and encoding of RFIF labels) Current label size: 90x36mm, applicator is designed for this size Label length min: 12.7mm Print media width: 16-114mm Ribbon width: 25.4-107mm Ribbon length max: 900m Roll size core diameter: 25.4mm Roll size maximum diameter: 101.6mm Resolution: 203 dots/inch (8 dots/mm) Dot size: 0.125mm x 0.125mm Print speed: 12 inches/second Base area: 700x700mm, with 100mm protruding control panel/compressed air maintenance unit Applicator height: 800mm lower edge Print speed: ...

Inv. Num. : 8407 Type: MB 4134 Producer:- Generated: Parameters: Stroke: 625 mm Maximum stroke rate: 150 1/min Ram weight: 250 kg Anvil weight: 2800 kg Machine length: 2615 mm Machine width: 1180 mm Machine weight: 7850 kg

pressure: 8,5 kN stroke: 40 mm throat: 95 mm Working height from to: 95 - 240 mm table surface area: 160 x 110 mm spindle diameter: 25 mm weight of the machine ca.: 27 Kg dimensions: 160 x 230 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 4,5 kN stroke: 40 mm throat: 95 mm Working height from to: 95 - 240 mm table surface area: 160 x 110 mm spindle diameter: 25 mm weight of the machine ca.: 24 Kg dimensions: 160 x 230 mm Direct-acting pneumatic presses bring the full pressure performance over the entire stroke length. You will above all used when long-stroke parts are machined with constant force Need to become. Convincing technology • Long and precise spindle guide for maximum dimensional accuracy • Hardened and ground piston rod for practically unlimited service life • Double-acting cylinders with end position cushioning on both sides • Double guide rings in the piston, constant and quiet running • Oil resistant sealing elements Special features of the PND series • Spindle secured against twisting • Spindle return on the PND 85/S only via a cylinder chamber additional air savings • Easy,  ...

Single column pneumatic press, hydraulic press PAUL ANTON type PVT 2Pneumatic table press, embossing pressFabr. No. 97148 Year of construction approx. 1980Compressive force: 10 tonProjection: 100 mmPlunger stroke: approx. 25 mmPlunger surface: 32 mmTable size: 250 x 220 mmTable opening: 53 x 53 mmTable height: 1060 mmInstallation height: 155 mm- very stable construction- Hydro-pneumatic press with pressure transmission air on oil- pneumatic foot switch- Plunger with internal thread M12- Metal substructureSpace requirement L x W x H 850 x 620 x 1560 mmWeight

punching pressure: ca. 3,2 t air pressure: 8 bar stroke: max. 20 mm distance between columns: ca. 250 x 200 mm weight of the machine ca.: 52 kg incl. various tools, see pictures The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pressure power: 6-8 bar Air consumption: 8 l/Hub height of stroke: 12 mm : 134 mm no. of strokes: 400 Hub/min punching force max.: 3500 kp weight of the machine ca.: 80 kg Schüco pneumatic press for Schüco punching tools Art. No. Schüco: 290 124 manual included various pressing tools included! tool nr. 283073, 280162,299259,283492, 283072, 282867, 282644, 282663, 282868, 283071, 283072 2 quick-release levers for secure and quick fastening of the press tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pneumatische Ösenmaschine / pneumatic Eyeletting machine Falzoni F401.9.S21

4 column press Tox MAg 008288A001 BJ 2016

Rotary drive, actuator, actuators, gear motor, rotary valve, pneumatic cylinder actuators -Actuator for: gate valves, locks, ball valves ... -Construction: hollow shaft -Diameter hollow shaft: 120 mm -Number: 3x drives available -Price: per piece -Dimensions: 1700/500/H650 mm -Weight: 450 kg

Pneumatic pressure switches -Type: PEV-WS-LED-GH -Adjustable pressure: 2-8 bar -Quantity: 2 available Price: per piece -Weight: 0.15 kg

Pneumatic pressure switches -Type: 2KA/96x96/0-10 bar -Adjustable pressure: 0-10 bar -Number: 4 switches available -Price: per piece -Weight: 1.2 kg

Pneumatic folding bending machine FASTI Type 606 - 11 - 1.0Folding machine for sheet metal folding pre-bendingFor making a fold bendFolding bending machine for thin sheet metal instead of press brakeFabr. No. 9166002 year of construction 1991Working length: 1100 mmMaterial thickness at 45 kg/mm² 1 mmCompressed air requirement 6 bar- pneum. Foot switch roller infeed via threaded toggle screwsSpace requirement L x W x H 1600 x 300 x 1050 mmWeight approx. 250 kggood conditionThe fold is the doubling of the sheet metal in the edge area, i.e. 1x folded around the

Pneumatic limit switch, push button, limit switch -Type: RWN/0-3-1/8B Price: per piece -Number: 14 available -Weight: 0.5 kg/piece

Clinch unit TOX - Pneumatic-Hydro Tox pressHydro-pneumatic press TOX Pressotechnik POWER PACKAGEType type CRS 03.62No.: 207599.2Year of construction approx. 2005Pressure capacity: max. 80 kN = 8 tonProjection: 20 mmInstallation height: 32 mm- Built-in clinch tool- pneumatic valve for control- Push-through joining or clinching- For making a form-fit connection of 2 sheets without perforating or heating the sheets- Mounted on the stand- with the simplest electrical control and Foot switchWeight: 230 kgComes from

Pneumatic pressure switches Type: Nautilus -Pressure: -1 to 0.8 bar -Operating voltage: 240 VDC -Quantity: 3 pieces available - Price: per piece -Condition: Stock item, unused -Weight: 1 kg

Hydraulic pressure switch -Type: EAXT518A-3 -Connection: 21-26 VDC -Price: per piece -Number: 8 available -Weight: 0.1 kg

Reciprocating compressor KAESER type EPC 630-250Fabr. No. 1802334 year of construction 1992Volume flow at 6 bar 440 litres/min. Capacity max. 630 litres/min. Pressure capacity 10 barBoiler capacity 250 litersEngine power 3 kWNerg connection 400 Volt, 50 Hz (with 16 Amp. Plug)- 2 cylinders oil-lubricated- Pressure switch set to 10 bar- Runtime from 0 bar to 10 bar Shut-off pressure = 5 minSpace required L x W x H 750 x 700 x 1750 mmWeight approx. 150 kgGood condition; used

Pneumatic pressure switches Type: MDR2/11 -Number: 7x pneumatic pressure switches available Price: per piece -Weight: 0.3 kg

Pneumatic toggle press, pneumatic press SCHMIDT type 34-12Fabr. No. 400160-03 Serial No. 0028 Year of manufacture 2008Compressive force 28 kN = 2.8 ton. Throat depth 130 mmPlunger area 63 x 36 mmPlunger stroke 12 mmPin hole 20 mm with clamping screwCompressed air requirement 2 to 6 bar- Stroke length infinitely variable via adjustable fixed stop for the upper end of stroke position- Fine adjustment for lower end of stroke position with scale 1 tick = 0.05 mm- Stroke triggered via pneumatic valve, triggered by material insertion- Press stand 45 off

Pneumatic diverter, electric, as good as new

Butterfly valve, flap valve, ball valve, butterfly valve, shut-off valve, gate valve, pneumatic control valve, angle seat valve, valve -Manufacturer: Bürkert, pneumatically operated 2/2-way angle seat valve -Type: 2000A 40.0 PTFE VA -Connection: DN40 PN16 -Dimension: 220/100/H240 mm -Weight: 2.9 kg

Senco PAL70 Compressed Air Nail Gun Top condition, MINT CONDITION, unused, is sold as used.

Solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block, on-off valve, pressure build-up valve -Manufacturer: Festo, on-off valve pressure build-up valve orig -Type: HEL-D-MIDI Mat. no. 170691 U643 series -Working pressure: 3 - 16 bar -Dimensions cardboard: 65/55/H130 mm -Weight: 0.5 kg.

PNEUMATIC TRANSFER PRESSES - HEAT PRESS FOR T-SHIRT PRINTING – INTRON COPY PRESS 300 220 070 Sr. No.: 9304 0392 Equipment / Additional information: Professional shirt / cardboard and press for various things that need printing

Nominal weight of the falling parts: 750 kg Max. number of blows per minute: 105 Kinetic energy: 1900 kg Distance from an axis of the slider up to bed: 750 mm Cylinder diameter: 600 mm Diameter of the plunger: 630 mm Max. headstock travel: 835 mm Dimensions: -Left-to-right: 3940 mm -Front-to-back: 1430 mm Height above floor level: 3260 mm Weight: -With an anvil-block: 25600 kg -Without an anvil-block: 16600 kg

Control box, control unit, pneumatic control -Manufacturer: Festo, pneumatic control system 1000 -Control no.: 3051 9 -Inlet pressure: max. 14 bar -Operating pressure: 4 - 6 bar -Dimension: 490/410/H945 mm -Weight: 56 kg

Pneumatic grease gun, compressed air grease gun, grease pump -Grease gun: pneumatic, compressed air grease gun, mobile version -Container capacity: approx. 100 liters / Ø 462 x 625 mm -Overall dimensions: Ø 606 x H1020 mm -Weight: 63 kg

Steam tank with pneumatic opening - Lenght mm. 2100 - Diam. mm. 700

Pneumatic can opener, make Edlund, type 625 M, powerful compressed air operated lid punch, (crown punch),, industrial can opener for large cans,, self-sufficient can opener for industrial use,, Output: approx. 2,000 cans per day, Characteristics:, completely made of stainless steel, for thorough cleaning can be hosed down from top to bottom, IP 65,, Suitable for opening cans of almost any size thanks to the height adjustability, Two - hand - operation, Compressed air requirement: 56.6 l / min at 6 bar,, format range:, minimum box height: 40 mm,, max. box height: 300 mm,, max. can diameter: 230 mm,, Info:, - Existing punching crown for can diameter 153 mm, - Additional punching crown optional, - With magnetic lid remover

Moving steady rest, moving steady rest, steady rest, lynette -Bezel: pneumatically tensioning, self-centering -Type: SLK 087-1070/3 -Rollers: cylindrical -Dimensions/clamping range: see photos -Dimensions: 365/225/H370 mm -Weight: 43kg

Carsoe Group Anytray Buffer 1500 – Pneumatic Tray Buffer System, Manufacturer: Carsoe, Model: Anytray Buffer 1500 LLANONE Right Pneumatic, Year of manufacture: 2022, Machine type: Tray buffer / product accumulation system, Description, The Carsoe Anytray Buffer 1500 is a pneumatic tray buffering system designed to temporarily accumulate and manage trays within automated food processing and packaging lines. The system helps stabilize product flow and prevents interruptions between processing machines., Built with hygienic stainless steel construction, the unit is suitable for demanding food production environments, especially in seafood and protein processing facilities., Technical Specifications, - Manufacturer: Carsoe, - Model: Anytray Buffer 1500 LLANONE Right Pneumatic, - Year: 2022, - Power: 0.46 kW, - Supply voltage: 230 VAC + N + PE, - Frequency: 50 Hz, - Air pressure: 6 bar, - M ...