126,720 used machines on RESALE, but how to find them? Machine Search
Pneumatic multi function press Operating pressure 6-8 bar Weight 106 kg dimensions 0.70 x 0.38 x 1.05 m Comments: Multi function punch air consumption 18 l per stroke, pneumatic punching operation via foot switch tripping
Pneumatic conveying system for various types of powder, consisting of: feed hopper with lid and compressed air turbine vibrator (netter NCT 10), injector (Telschig 2' FOX 300-SCE-SS) and side channel compressor (Electric Sd 820, 7.5 kW, 9.0 m3/h, 420 mbar) with pressure limiting valve. Flow capacity: 375 kg/h, required conveying air: approx. 180 Nm3/h at 330 mbar.
Pneumatic table pressbrand BoschYear 1985Maximum printing capacity: 40 kNMaximum stroke: 30 mmMaximum operating pressure 5 barCondition: usedMaetall table frame
Butterfly valve, flap valve, ball valve, butterfly valve, shut-off valve, gate valve -Gate valve: MAW type NW 40/32 ND 40 -Valve drive: Leibfried type LDA 309-1 pneumatic -Nominal pressure: 7 bar -Connection: inside Ø 40 mm -Dimensions: 375/150/H195 mm -Weight: 14 kg
Nail series: 34° paper collated Strip nails Wire diameter: 3.8-4.6 mm Nail length: 100-160 mm Working pressure: 5-8 bar Weight: 7.10 kg Magazine capacity: 72 nails + Paper collated Strip nails of 4.6 x 160 19200 piece (600 St / carton, 32 piece box, order No. 140037) Compressed air nail machine 1100 EUR, 19200 ships nails 640 EUR
Double pneumatic table press Bosch brand Built in 1983 maximum pressure 18 kN maximum stroke: 70 mm maximum operating pressure 5 bar Two-handed actuation knob Table made of aluminium profiles Condition used
Table press, pneumatically operated Manufacturer K & W Beyer O.H.G Type Q10EL Power at 6 Atü 10 mkg Triggering the movement via electric valve Special price
Manufacturer: Festo 4 Koilen with holder made of aluminium profiles and 4 rollers Hose condition: New for more data see also photos please.
Technical data: -For punching into SCHÃ?CO - profile systems - air consumption per stroke 18 l -Air inlet 8 bar -Space requirement approx. B H 700 x 1250 X 500 mm -Weight approx. 100 kg -with:-foot switch -Original - machine base
Dopel membrane pump 1 inch with suspended solid pre-separator Pneumatically operated, mounted on transport trolleys on a mobile-by-mobile vehicle. Technical data: Gear ratio: 1:1 Maximum capacity: approx. 197.6 l/min Discharge quantity per cycle: approx. 0.88 l Air connection: 1/2" Nominal suction side: 1" Nominal diameter print page: 1" Maximum operating pressure: 8.3 bar Max solid diameter: 3.3mm Weight: approx.10 kg Lukra pumps, basement pumps Special price
Pneumatic riener for ship rivets Comes with the following accessories, 1 x impact bolt for round head 16 mm 1 x impact bolt for round head 22 mm
We can offer a complete French fries production line which manufactured by K&K,Netherlands in 2012, capacity is 1500kg/h. stopped,working condition, serious buyer cOntact us.
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Forced-action mixer, agitator, stirring device, mixing tool, pneumatic hand mixer, pneumatic agitator -Agitator: Pneumatically operated, unfortunately no type designation -Speed: adjustable -Stirring rod: Ø 140 x 600 mm -Overall dimensions: 300/140/H830 mm -Weight: 6 kg
Nozzle filter with pneumatic cleaning and suspended material filter used Manufacturer: Total filter area approx.m 2 Hose filter each approx.m 2 filter area with pneumatic cleaning Particulate matter filters Gea MultiClean KLH 1/1-re Floating fabric filter 6011 Filter class H11 Operating volume flow: 1000 m3/h too low operating pressure: + 2000/-5000 daPa Run-out with cell wheel lock Total dimensions approx. 2400 x 2400 x 4700 mm The filters were used in a carbon production plant. Subject to changes and errors in the technical data, dates and prices as well as intermediate sale.
Window rubber, cutting machine, gasket cutter, pneumatic lamellar cutter, blind cutting device -Lamellar cutter: for PVC and aluminum blinds, pneumatic -Manufacturer of pneumatic components: Festo -Dimensions: 680/340/H470 mm -Weight: 55 kg
Outlet valve 135/135 mm, with geared motor 0.09 kW, 8 rpm, Frame height 80 mm With 2 limit switches Discontinued transition . functionally tested, good condition We have four pieces of this model in stock, along with many other sizes for a wide range of applications. We look forward to hearing from you!
Pneumatically actuated outlet valve with rod cylinder WABCO x 63 x 400 mm 5/2-way solenoid valve 220V and position switch 80mm high Inlet side with hose connection socket s.350 (screwed on), checked The slider is currently limited to 260 or 160 mm stroke by limit switches We have two pieces of this model in stock, along with many other pipe valves, inlet valves, flaps, pipe crossovers for a wide range of applications. We look forward to hearing from you!
Pneumatic press, pneumatic punch, multifunctional punch, punch, universal punch, punching machine -Pneumatic cylinder: Festo type DC-100-050-PPV -Stroke: 50 mm -Holder: Ø approx. 9 mm -Dimensions: 350/200/H515 mm -Weight: 31 kg
2 fingers parallel external gripper, pneumatic, 52.81.3.500, FLT, new Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely mint condition and in its original packaging. 2 Finger Parallel External Gripper, pneumatic, 52.81.3.500 Manufacturer FLT (Fibro Läpple Technologie) Clear width closed 98mm Clear width open 122mm Gripper finger length front 60mm Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit does not function when it is put int ...
Name: Sprout punch Manufacturer: Schleicher, 8192 Gerelsried/Obb. Machine number: 8922 Year of construction: 1985 Condition: used, completely revised and tested - pneumatically operated rung punch - working height (cutting height): approx. 150 mm - working width (cutting width): approx. 120 mm - Width (incl. table extensions): 1520 mm - Depth: 600 mm - Height: 1120 mm - Two-hand operation - with angle stop - with length display (ruler) - with adjustable supports for processing palatine strips - Compressed air connection: 5 bar - dust-free working - Table extension left + right (removable) - Stops left + right removable - adjustable for single miter 90° and double miter 45° - 1 x sliding stop Transport dimensions (W x D x H): 1520 x 700 x 1370 mm on pallet Weight: 95 kg (incl. pallet) (Changes and errors regarding technical data and prices excepted!) In ...
Press Schüco Model 290124 Type 2 Specifications: •pneumatic • Operating pressure max. (bar): 8 • Weight max. (kg): 80 • Enclosed tool: included (see photos)
Nominal weight of the falling parts: 750 kg Max. number of blows per minute: 105 Kinetic energy: 1900 kg Distance from an axis of the slider up to bed: 750 mm Cylinder diameter: 600 mm Diameter of the plunger: 630 mm Max. headstock travel: 835 mm Dimensions: -Left-to-right: 3940 mm -Front-to-back: 1430 mm Height above floor level: 3260 mm Weight: -With an anvil-block: 25600 kg -Without an anvil-block: 16600 kg
The Posimat PB 80 is a pneumatically operated handling device. Version : with counterweight, suspended from on-site steel construction. Specifications: Load capacity: 120 kg; Hub; 1,600 mm; working range (radius) 2,600 mm; dead weight without counterweight and column: 150 kg The device was only in use for a few months.
Key data: 750 kN, 150 mm
Control: STE 328-89-1 1/2" complete TOX Powerhouse: S75.160.200.12D Table size: 996 x 695 mm Installation height: 600 mm Total stroke: 150 mm Power stroke: 10 mm Weight: 5700 kg Electrical connection 230 V
Pamasol 5934 Pneumatic Feeder With 1-lane output to the conveyor belt Accumulation conveyors ensure an even supply of product to a processing machine. - Hinge chain 150 mm wide - 5-lane, with 1-lane output - Drive with infinitely variable geared motor - Suitable for continuous operation in hazardous areas - Electric drive unit Electrical connection: 3 x 400 V + N + PE, 50 Hz Dimensions: H x W x L 88 x 80 x 210 cm More items in other sizes - new and used - can be found in our shop! International shipping costs on request!
Pamasol 33200 Pneumatic Feeder With 1-lane output to the conveyor belt Accumulation conveyors ensure an even supply of product to a processing machine. - Hinge chain 150 mm wide - 8-lane, with 1-lane output - Drive with infinitely variable geared motor - Without central belt drive - Suitable for continuous operation in hazardous areas - Electric drive unit - Feeding table suitable for Centomat Specifications Capacity: Up to 3000 cans per day The output depends on the size of the can, the filling volume, the type of valve and the number of workers Cans: Ø 100-200 mm x H 50-200 mm, aluminium, tinplate and glass Electrical connection: 3 x 400 V + N + PE, 50 Hz Dimensions: H x W x L 88 x 140 x 290 cm Original price 57.000 ,-€ More items - new and used - can be found in our shop! International shipping costs on request!
Semi-automatic drilling device for plastic parts This purely pneumatic drilling device is designed for repeatable drilling of small plastic parts up to approx. 40 x 200 x 40 mm with holes up to 3 mm. Specifications: - Linear axis travel 420 mm - Stroke approx. 30 mm - Height adjustment approx. 100 mm - With 2-hand release - Plexiglass protection on 3 sides - Emergency stop switch - Sturdy, mobile frame made of aluminium profiles - With 4 swivel castors, 2 of them with brakes - Overall dimensions approx. 1000 x 1000 x 1700 mm - Weight approx. 50 kg - With collet for drill bit 1.5 mm Expiration: - Setup: Adjust stop angle to part size - Setup: Alignment of cross table in X and Y - Setup: Set height adjustment to part height - Inserting the part - Triggering via 2-hand button and holding until drilling is completed - Removal of the finished part and placement ...
Lattice box emptying, pneumatic, for lattice boxes 1200 x 800 mm Dimensions: 2200 x 1700 x 2250 mm (LxWxH) Weight approx. 1500 kg The facility is in good condition. It has been checked and tested by us. A video can be found on our page or youtube channel.
Z.V.B. Pneumatic lift with belt conveyor Manufacturer: Z.V.B Type: Pneumatic Lift with Belt Conveyor Voltage: 230 V Belt height approx. 400 - 800 mm Total dimensions: H x W x D = 1800 x 5000 x 800 mm Incl. Enclosure / safety fence More items - new and used - can be found in our shop! International shipping costs on request!
Pneumatic Gripper, 2-Jaw Angle Gripper DESTACO RUA 112 MPREF ( RUA112MPREF ) Beam Angle: 38° Pressure Range: 2 - 6 bar Bolt Circle Diameter: Ø 95 mm New ! Dimensions: 115 x 115 x 90 mm; test
Air Ratchet, Air Ratchet, with Torque Adjustment INGERSOLL-RAND, CHARLES MAIRE BALD32SL CM390468 ( BALD32SLCM390468 ) Pmax: 6.3 bar speed: 300 rpm Tool holder: 3/8 New ! with underlays ! Dimension ( Air ratchet ): 420 x 240 x 45 mm Dimension ( Packaging ): 520 x 300 x 90 mm
Butterfly valve, flap valve, ball valve, butterfly valve, shut-off valve, slide valve, directional valve -FestoTyp: VL-5/4-1/4 series 0385 -Working pressure: 0 -10 bar -Number: 2x valves available -Price: per piece -Dimensions: 95/60/H80 mm -Weight: 0.8 kg/piece
Pneumatic Clamp GENUS TECH MPL 25EEP ( MPL25EEP ) 22885 cylinder CNOMO < -br /> trinorm-2 PCN 50 A 50 DI ( PCN50A50DI ) 43760063 max 10 bar New !' Dimensions: 370 x 250 (275) x 65 mm
pneumatic power clamp POLYMATIC 14731.G40.30F.28.P483404018.4197 Clamping angle: approx. 15° Driver: 30 x 30 mm two position sensors Pneumatic cylinder: JOUCOMATIC trinorm CNOMO A3700703 PCN540 A 50-C Pmax: 10 bar New ! Dimensions: 425 x 140 x 102 mm
pneumatic clamping actuator NAREX JU 30 driver: 28 x 28 mm used, tested ! Dimensions: 200 x 140 x 170 mm
Pneumatic Filter NORGEN EXCELON F74H-4GD-AD0 max 17 bar max 65°C 1/2 inch New ! Dimensions: 440 x 90 x 85 mm
Directional Control Valve, Pneumatic Valve FESTO Type: 9983 Vl/O-3-1/2 Series: H802 Pe: 1 - 10 bar Dimensions: 140 x 120 x 50 mm
Pneumatic valve BOSCH PDV 0 821 302 037 P1: 12 bar P2: 0 - 10 bar 24 V DC Dimensions: 190 x 130 x 55 mm
Valve, control valve, emergency stop valve -Type: VAC-14 VIZ-3311-LOVB-125G -Number: 10 valves available -Price: per piece -Dimensions: 195/90/H60 mm -Weight: 1 kg
Electro-Pneumatic Assembly JOUCOMATIC 267 90 001 261 90 067 192 00 002 881 28 409 230 V AC 4 W New ! Dimensions: 195 x 125 x 85 mm
Directional Control Valve, Pneumatic Valve FESTO Type: VSVA-B-P53C-H-A2-1C1 Series: D602 24 V New ! Dimensions: 110 x 75 x 20 mm
Directional Control Valve, Pneumatic Valve YPC SIV443-IP 2 - 10 bar 220 V 50 Hz New ! Dimensions: 150 x 100 x 45 mm
directional control valve, pneumatic valve BOSCH 0 820 022 982 24 V used, tested ! Dimensions: 220 x 65 x 55 mm
Directional Control Valve, Pneumatic Valve FESTO Type: CPE14-M1BH-5/3GS-QS-8 Series: S402 196906 0.9 - 10 bar 24 V Dimensions: 150 x 100 x 15 mm
Directional Control Valve, Pneumatic Valve FESTO Type: CPE14-M1BH-5/3ES-QS-8 Series: S402 196902 0.9 - 10 bar 24 V Dimensions: 150 x 100 x 15 mm
maximum number of results exceeded
please refine your search
