137,086 used machines on RESALE, but how to find them? Machine Search
Please try with a different search term.
Stock number: F789, In stock: Yes, Amount in stock: 1 pc., Item: Packing unit, Wrapping welder: Manuel straight passage, Motor: 380 Volt, Gap: W 600 x H 300 mm, Outer dimensions: L 1100 x W 1250 x H 1650 mm, Shrinking tunnel: Variable speed of band, Motor: 18 kW - 380 Volt, Gap: W 600 x H 300 mm, Outer dimensions: L 3000 x W 1150 x H 1850 mm
Used Used filling monoblock PMR: Year: 2013 Condition: As Is Used filling monoblock PMR Year: 2013 Speed: 800 bph Direction: Clockwise Volumetric filling Cap: twist-off ? 43, ? 70 deep, ? 82 Many bottles format. Safety protections. Code: QT 266 More details: https://bottlingscout.com
Mechanical stamping press manufactured in 2018. This PME PE 400-1700 C features a nominal pressing force of 4000 kN and a machine weight of 33,000 kg. It has a maximum ram adjustment of 180 mm and can accommodate tool dimensions of up to 1100 x 800 mm. If you are looking to get high-quality stamping capabilities, consider the PME PE 400-1700 C machine we have for sale. Contact us for further details.
The PME 400-1700 C is a mechanical C-frame press manufactured by PME Pressen- und Maschinenbau Erfurt GmbH. While specific details about the 2018 model are limited, based on PMEs product offerings and industry standards, the following information outlines the typical features and specifications of this press model --------------------------------------------------------------- Key Specifications - Pressing Force: 400 kN (approximately 40 tons) - Table Width: 1,700 mm - Frame Type: C-frame (single-column) - Drive System: Mechanical eccentric drive via countershaft - Clutch-Brake System: Pneumatically or hydraulically operated combination - Ram Guidance: Precise sliding guide or roller recirculation guide - Stroke Adjustment: Fully automatic and electronically monitored - Ram Adjustment: Motorized - Overload Protection: Hydraulic system Find more here - .ucymachines/ Contact us at ...
Temperature controller, temperature sensor, setting for temperature, signal converter, temperature converter, temperature monitor, thermostat, transmitter -Manufacturer: PMA, temperature control -Type: CI 45 -Output: 500 VA, 250 VAC, 2A -Dimensions: 125/22/H110 mm -Weight: 0.2 kg
Stock Number: 3785 ECCENTRIC PRESS Manufacturer: PMB, Type: EPFT 100 Machine NO.: 004301, Year of manufacture: 2002 Specifications: Table size 780 x 590 mm Stroke length 8-120 mm Number of strokes per minute 55 Projection 300 mm Operating height 395 mm Total power 7.5 kW Pneumatic clutch. Gear ratio. Hydr. Overuse protection. Weight: 5500 kg
Stock number: 3855 ECCENTRIC PRESS Manufacturer: PMB, Type: EPF 64 Machine NO.: 744103, Year of manufacture: 1974 Specifications: Gr. pressing pressure 64 to Table size 520 x 700 mm Stroke length 8-96 mm Projection 265 mm Total power 5.5 kW Control Fabr. Pneumatic clutch. Length: 2000 mm, Height: 2500 mm, Width: 1200 mm, Weight: 4000 kg
Key data: 30 mm, 28 , 110 U/min
Used Filament Line Single Screw Extruder 30mm 28L/D 2 meter water bath Trigger AB50 Winder W250 Machines from PMH GmbH
CNC Milling machine PMER type S120 Travel X: 1200 mm Travel Y: 630 mm Travel Z: 600 mm Numerical Command ANILAM 5300 (Defective ANILAM screen changed by a PC screen + PC keyboard) Cone: BT 40 Spindle speed: from 50 to 6000 RPM Table size: 1600 x 500 mm Year of construction: 2002 Maxi distance spindle nose/table: 730 mm Mini distance spindle nose/table: 130 mm Diameter of the spindle sheath : Ø 150 mm Pneumatic tool clamp Central lubrication Lubricant pump Voltage: 380 V Width: 2300 mm Depth: 3600 mm Total height: 2600 mm Weight: approx 4,5 T
CNC Milling machine PMER type DPM Travel X: 780 mm Travel Y: 410 mm Travel Z: 550 mm Numerical Command ANILAM type 5000 M Cone: ISO 40 Spindle exit: 120 mm (manual) Spindle speed: from 70 to 3800 RPM Table size: 1270 x 320 mm Year of construction: 2004 Maxi distance spindle nose/table: 500 mm Mini distance spindle nose/table: 100 mm Swivel head right/left Jog crank Possibility to work manually (with cranks) or driven by the CN Lubricant pump Voltage: 380 V Width: 1900 mm Depth: 2100 mm Total height: 2500 mm Weight: 2,5 T
Used Used PMR filling monoblock: Year: 2018 Condition: As Is Model: PL 501 Year: 2018 Speed: 4.000 bph Direction of rotation: Clockwise Type of bottle: glass bottle 50ml Filler - Number of valves: 16 - Type of filling: High vacuum - Tank height adjustment: manual Capper - Number of heads: 4 - Head height adjustment: manual - Type of workable caps: ROPP caps - Size of caps: 18 x 12mm - Caps distribution system: pick on the fly Safety protections Code: QT 777 More details: https://bottlingscout.com
automatic two-side (front&back) labelling machine, PMR operation system OP3000, newer used, new 2022
vertical smoothing unit, 900 mm 3 rollers, D = 355 mm 40 m/min pneumatic delivery of the rollers with cooling rollers, trimming station, extractor and chassis
Extruder 70 mm - 24 L/D with pipe head up to 63 mm, calibration tank 6000 mm Caterpillar extractor, saw
complete "package" with perforated disc, siebronde, nozzle plate we also supply new nozzle plates according to your requirements Monofilament systems on request and specification
New extractor frame 900 mm on steel construction. 2 winding capoles are used underneath for edge-straight Winding positioned. The winding capoles are fitted with new pneumatic Expansion winding shafts for 76 mm bobbins. with electric drives
Key data: 30 , 28 , 110
Plant for the production of filament for use in 3D printers Capacity up to 10 kg/h consisting of 30 mm extruder, stainless steel trough, puller and winder with traverse guide
Key data: 30 , 28 , 110
Single-screw extruder with new 7,5kW drive, new gear box, new cylinder and new screw 30 mm - 28 d, nitrated new ceramic heating elements, cooling fan, temperature sensors Control cabinet integrated in the machine frame Machine frame on wheels Stainless steel hopper
Extruding system with cross-spray head for sheathing of small profiles/filaments consisting of: 30 mm extruder with tool, water bath, extractor and winder Optional with memory for role change
Compounder with segmented screw elements, cylinder with a degassing opening with hot tee, stainless steel housing, swivel
Angle flange, flange, cable entry, cable protection -Nominal width: 48 mm -Protection type: IP 66 -universal: applicable -Packaging unit: 10 pieces -Price: per packaging unit -46x bags: 10 pieces each -Dimensions: -Weight: 1 kg/piece
Gearbox, spur gear -Translation: 1:2,9 -Drive shaft: Ø 19 mm -Drive shaft: Ø 19 mm hollow shaft -Dimensions: 260/240/H180 mm -Weight: 12 kg
Nominal pressing force 4,000 kN Plunger stroke, adjustable in steps 30160 mm Plunger adjustment 180 mm Projection 515 mm Idle stroke rate 45 / min Option: infinitely variable 10 ... 60 / min Tool installation height at maximum stroke bottom and top adjustment 660 mm Table clamping area (WxD) 1,700 x 1,000 mm Table height above floor 1,005 mm Plunger clamping surface (WxD) 1,100 x 800 mm Pin hole in plunger 65 mm Main motor power 45 kW Height of the machine approx. 4,325 mm Weight of the machine 33,000 kg Control system - press safety control with redundant design and self-diagnosis as well as a status and error display in plain text Stepless stroke rate control in the range of 1060 strokes/min via ABB frequency converter Control variant -touchscreen TFT color incl. electronic cam switchgear with tool control and tool safety, ...
Press capacity: 160 ton Ram stroke adjustable: 20 - 130 mm Slide adjustment: 100 mm Daylight: 560 mm Table surface area : 1500 x 800 mm Slide area: 1400 x 800 mm Number of strokes: 20 - 60 s.p.m. Distance between the columns F - B: 520 mm Height over floor approx.: 3550 mm Required power: 48 kW Weight of machine approx.: 26 ton
Lifting capacity: 100 Kg Magnetic field: 70 x 60 mm weight: 5 Kg dimensions: 100 x 120 x 120 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Lifting capacity: 1000 Kg Magnetic field: 258 x 176 mm weight: 0,031 t dimensions: 0,26 x 0,18 x 0,16 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Lifting capacity: 600 Kg Magnetic field: 228 x 122 mm weight: 0,022 t dimensions: 0,23 x 0,122 x 0,112 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Lifting capacity: 1500 Kg Magnetic field: mm weight: 0,045 t dimensions: 0,44 x 0,22 x 0,25 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Lifting capacity: 300 Kg Magnetic field: 228 x 122 mm weight: 16 Kg dimensions: 0,23 x 0,122 x 0,112 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Lifting capacity: 2000 Kg Magnetic field: 350 x 150 mm weight: 70 Kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Lifting capacity: 2000 Kg Magnetic field: mm weight: 80 Kg dimensions: 0,5 x 0,25 x 0,3 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Proline PM2002 CC – Dental Panoramic with Fujifilm Profect Scanner Manufacturer: Proline Model: PM2002 CC The Proline PM2002 CC Dental Panoramic with Fujifilm Profect Scanner is a piece of equipment used in dental radiology to capture high-quality panoramic images of dental and maxillofacial structures. The Proline PM2002 CC is designed to provide accurate and detailed images while minimizing radiation exposure for the patient. It offers a wide variety of imaging programs to meet the specific diagnostic needs of dentists and radiologists. The Fujifilm Profect Scanner allows traditional X-ray images to be converted into digital format, providing better image quality and ease of data storage and sharing. Together, these two pieces of equipment provide a complete solution for dental imaging, providing accurate diagnostic results and efficient patient management. Set including EIZO ...
Bucher PM20 – Pigtail pump 20 t/h This BUCHER spiral pigtail pump with a maximum capacity of 20 t/h is designed for the transfer of harvests and loaded products in the wine and agri-food environment. Its configuration on wheels, combined with a helical pumping technology adapted to the reception of the harvest and the transfer of the pomace, makes it a simple, robust and immediately usable solution to complete a pumping installation in the cellar. Technical data Pigtail helical pump Brand: Bucher Type PM20 Level sensor Boers outlet Ø 120 mm Max capacity: 20 T/h Wheeled assembly Dimensions Length: 2100 mm Width: 700 mm Height 900 mm Tank size: 650×650 mm, height 370 mm Location: Monteux (84) Equipment sold loaded on truck: dismantling and loading offered by the seller. Auction-ID: A1-51122-330
Yamaha Rivage PM5 – Digital Mixing System: CS-R5 Control Surface + DSP-RX Motor with HY144-D Dante Board Manufacturer: Yamaha Model: Rivage PM5 (CS-R5 Surface + DSP-RX Engine) Purchase: Purchased new on 24/06/2021, first hand Use: 2 to 3 times per year Firmware: V6.71 (console and DSP) DSP-RX engine 120 input channels 48 mix buses + 24 dies HY144-D Dante board installed Mounted in a 19\" wheeled rack flight case with power distribution (Samson PowerBrite PB11 conditioner + power strip), lock drawer and wiring CS-R5 control surface 3 touch screens 8 mic/line inputs and 8 local outputs Supplied in its own wheeled flight caseComposition of the lot: CS-R5 surface, DSP-RX motor with HY144-D board, 2 wheeled flight cases, electrical distribution and wiring. Sold as shown in the photos. Disassembly and loading are to be arranged by the buyer, who provides suitable transport and ...
Lubrication pump with tank VOGEL PMS 5 A Q 57 l/min P 0.1 bar 220 / 400V motor: 0.12 kW Dimensions: 400 x 200 x 375 mm
Pressure transmitter ENDRESS + HAUSER CERABAR PMC731-R11P1E19Y1 Pmin: 500 mbar Pmax: 10 bar IP65 Dimensions: 140 x 110 x 110 mm
Scooter ITOH DENKI Power Moller PM570AS-15-300-3-380-UR630A Diameter: Ø 63 mm Length: 300 mm New ! Dimensions: 360 x 70 x 70 mm
Scooter ITOH DENKI Power Moller PM570AS-15-400-3-380 Diameter: Ø 66 mm Length: 400 mm New ! Dimensions: 460 x 80 x 80 mm
Scooter ITOH DENKI Power Moller PMA-15-250-V2 Diameter: Ø 57 mm Length: 250 mm with junction box New ! Dimensions: 310 x 70 x 70 mm
Scooter ITOH DENKI Power Moller PMA - 5 - 250 - 3 - 200 - G Diameter: Ø 63 mm Length: 250 mm Dimensions: 360 x 70 x 70 mm
Pressure transmitter GE SENSING PMP 1400 0 - 60 bar used ! Dimensions: 120 x 60 x 55 mm
Used Branson PML 1250 ultrasonic generator + bath Power: 220 volts (50hz) Auction-ID: A1-50936-136
Rollable version, with backrest and height adjustment Auction-ID: A7-51473-10
Rollable version, with backrest and armrest as well as height adjustment Auction-ID: A7-51473-25
Rollable version, with backrest and height adjustment Auction-ID: A7-51473-31
maximum number of results exceeded
please refine your search
2.800 € 
