pm technologies used for sale

pressure: 100 t distance between columns: 1000 mm stroke: 150 mm distance table/ram: 500 mm table surface area: 1000 x 700 mm die cushion stroke: 180 mm ram surface: 1000 x 700 mm ram drills x depth: 50 mm no. of strokes: 85 Hub/min tool shank hole (depth x diameter): 85 x 50 mm clamping slots: 22 DIN 650 form: diagonal number of clamping slots: 2 sheet width: 400 mm plate length: 1000 mm dimensions of the machine ca.: 3,0 x 3,0 x 3,0 m weight of the machine ca.: 8 t total power requirement: 30,2 kW - fine adjustment of stroke - cutting impact damping - oil extraction - 2 cylinders - roller feed, make Dreher, type WAV, control PMS3000 - soundproof cabin - machine was overhauled in 2001 and with new control SIEMENS SIMA-TIC OP17 equipped The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

0: 230 °C Torque: - 0 Dimensions (HxWxD): 680 x 1320 x 760 mm weight: 177 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 50 mm band length: x mm band speed: x m/min speeds: 1800-3600 U/min total power requirement: 5.5 kW weight of the machine ca.: 0.6 t 1x Belt 1x Polishing www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Digital weight,stainless steel,Mettler Toledo PM30-K,0-32 kg,stainless weghing plate.

Elster SM-RI-X-E G1600 Turbine Wheel Gas Meter Elster Turbine Wheel Gas Meters SM-RI-X-E-G1600-200-98.5-K (170) Qmax: 2500 m³/h Qmin: 130 m³/h pmax: 89.5 bar Item #: 10520813-2014 Pulse generator HF2 162,370 Imp/m³ Regular price: 21.540,-€ net

Optical Emission Spectrometers (OES) are characterized by the fact that they provide complete chemical analysis, even of critical alloying elements at low detection limits, which handheld XRF and LIBS devices cannot achieve: carbon, phosphorus, sulfur, boron, arsenic and tin in low-alloy, stainless steels and nitrogen in duplex steels. For this reason, spark spectrometry is the world's most reliable and widely used method for creating and verifying MTR's (Mill Testing Reports). Our instruments also meet the world's most stringent PMI testing requirements for metallurgical alloy chemistry, including API 5L testing, API RP578, ASME Section IX B& PV, ISO 17025 and A2LA standards.

For sale used lining machine for aluminium caps PMV 100 /produced SACMI Italy /. Good working condition

Size 36 x 52 cm, Cptronic, Segmented ink blades, Alcolor dampening, Baldwin cooling and recirculation system, Blanket wash, Easyplate, 13.000 sheets per hour. Machine nr: PM000318, Impressions: 46 million

Permanent overbelt magnetic separator TYPE PM1200 Manufacturer: the magnet professionals L x W x H: 1200 x 550 x 200mm Magnetic L: 700mm W: 230 H:120mm Gear motor: 0.18KW Bottom bracket lubrication for 10,000 operating hours. Protection class: IP-54

thread dia.: M3 - M16 metrisch : 250 U/min. 0: 6 - 8 bar working area: max. 1200 mm weight: 15 kg dimensions: 700 x 280 x 250 mm Pneumatic tapping machine Version with an adjustable angle, horizontal Tapping possible Pneumatic tapping machines for M3 - M12 threads, angle adjustable. 6 quick-change chucks with slip clutch. Optional: clamping table with grooves, type: FL-WB The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Permanent overbelt magnetic separator TYPE PM1200 Manufacturer: magnetprofis GmbH & Co. KG L x W x H: 1200 x 550 x 200mm Magnetic L: 700mm W: 230 H:120mm Gear motor: 0.18KW Bottom bracket lubrication for 10,000 operating hours. Protection class: IP-54 Applications: Wood wood chips, cable granules, plastic granules, all bulk materials

thread dia.: M3 - M12 metrisch : 400 U/min. 0: 6 - 8 bar working area: max. 1000 mm weight: 15 kg dimensions: 700 x 280 x 200 mm Pneumatic tapping machine Version with an adjustable angle, horizontal Tapping possible Pneumatic tapping machines for M3 - M12 threads, angle adjustable. 6 quick-change chucks with slip clutch. Optional: clamping table with grooves, type: FL-WB The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CTP-Mitsubishi - DPX 460 – Plate platesetter with Rip-Mate PC Year of construction: ca. 2007 incl. software and accessories incl. originally packaged role films For the production of ready-to-print stamped polyester printing plates Mitsubishi SILVER DIGIPLATE Suitable for the following presses: For Heidelberg QM 46, GTO 46, GTO 52 For Ryobi 5xx For Roland Edelmann Practica 400x510mm For Heidelberg Speedmaster SM 52 – PM 52 2x stock rolls 1x integrated register punch for PM52 autoplate

Manufacturer: ELMO RIETSCHLE / Garden Denver Type: G200 2BH1900 Overall size: 500 x 600 x 1100 mm Connecting pipe stub: DN100 Pmin: 280 mbar RPM: 2920/min Electrical data: 50 Hz; 380 V; 12,5 kW; 28 A

Manufacturer: ELMO RIETSCHLE / Garden Denver Type: G200 2BH1900 Overall size: 500 x 600 x 1100 mm Connecting pipe stub: DN100 Pmin: 280 mbar RPM: 2920/min Electrical data: 50 Hz; 380 V; 12,5 kW; 28 A

Eccentric screw pump,stainless steel,Netzsch type NM045BF,with screw feeding.

Hydro-pneumatic aluminum circular saw Fabr. EMMEGI Type SCA 400 PMachine -No: 176667 Year 1997Technical specifications:Saw blade diameter: 400 mmSaw blade speed: 2800 rpm.Swivel range up to: 15 ° left / + 15 ° rightWith- Underframe- pneum. Workpiece clampingvery little used, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydr. Horizontal long-cut cold circular saw make TRENNJÄGER type PMC 6Machine -No: 282, built in 1989Saw blade diameter: 460 mmCutting height: 150 mmCutting area at 90 °: 650 x 150 mmCutting area at 45 °: 450 x 150 mmWorking height: 850/950 mmExternal dimensions: 2300 x 820 x 1900 mmWeight: 1500 kgWith- 3 vertical hydr. clamping cylinders- miter device- Cooling deviceused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Water-cooled projection welder make DALEX type PMS 11-3Masch. -No: 8809215 Year 1992Rated power: 63 kVAConnected load: 174 kVAOperating current at 50% ED: 11.06 kVASec short-circuit current: 48.5 KAOpen circuit voltage: 0 - 5.6 VElectrode holding force: 100 - 600 daNWeight approx. 398 kgWith- Bump welding set in agreement as desired- 5TT controlused in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Labeling machine CAVAGNINO&GATTI – Self-adhesive labeling machine •Year of construction: 2002 • Speed: 10,000 B/h • 3 self-adhesive stations • Separate stainless steel control panel. •14 heads. • Direction of rotation: Counterclockwise • Format parts are included in the offer • Security protection.

Rated power at 50%ED: 80kVA Short-circuit current: 35.9kA Electrode force: 100-600daN/DH Projection: 550mm --- Welding control: Filius classic 128 programs Machine control PLC Siemens S7-1200F --- Incl. additional options: - Double foot switch - Safety valve 2-channel - Pressure-free lowering of the upper fitting - Adjustment device - Forearm support - Flow monitor, electronic - Electrode power switch, electronic - Main switch --- Warranty 6 months --- Training + commissioning on request --- Spot welding electrodes + spare parts available from stock --- Further information on our homepage

Labeling machine CAVAGNINO&GATTI – Self-adhesive labeling machine •Year of construction: 2003 • Speed: 10,000 B/h • 3 self-adhesive stations • Separate stainless steel control panel. •14 heads. • Direction of rotation: Counterclockwise • Format parts are included in the offer • Security protection.

current capacity: - kVA throat: - mm contact pressure capacity: - kp Rated power ( 50% ED ) : 50 kVA Continuous power : 35.4 kVA Maximum short circuit power : 163 kVA High welding power : 130 kVA Arm distance min. / max. : 60 / 230 mm Electrode arm Ø : 45 mm Electrode holder Ø : 25 mm Outreach : 610 mm Machine weight: approx. 285 kg Dimensions : 1200 x 700 x 1450 mm incl. foot switch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Labeling machine, Fabr. Krones, type: Bonamatic, with 16 bottle plates, #Die machine was in a wine bottling Corresponding format parts are included in the offer# •Year of construction: 1993 • Speed: 12,000 B/h • 2 stations • 16 heads • Direction of rotation: Counterclockwise • many complete format parts are included in the offer see picture • Control: Siemens S5 • Security protection. • Machine dimensions: W=2.90m, L=2.50m, H=2.40m • Weight: 6.5t

Condensing unit: SHGX56e/1155-4 L Serial-No.: 170151 Refrigerant type / GWP R449A/1397 Filling quantity / CO2 equivalent: see system type plate Oil type/quantity: SE55 / 3,3l Working voltage: 400V/3Ph/50H Ab. Overpressure suction side PS: 19 bar Ab. Overpressure pressure side PS: 28 bar Ab. Temperature suction side TS: -40/+40°C Ab. Temperature pressure side TS: 0/+120°C Production No.: B06884.01/79183 Year of construction: 11/2019 Contains fluorinated greenhouse gases covered by the Kyoto Protocol Type: HGX56e/1155-4 Product code: BB47202C057 imax: 46.9A Y: 149A YY: 246A Pmax: ND(LP) / HD(HP) = 19/28 bar 380-420V Y/YY - 3 - 50HZ n: 1450 min V: 100,4 m³/h 440-480V Y/YY - 3 - 60HZ n: 1740min V: 120,5 m³/h IP66, oil: SE55

Tool presetter SOMET type SPS 500 U Masch. No. S1-020 Year of construction 1987 Table surface 545 x 1000 mm Travel X = 500 mm, Y = 340 mm Width in the portal 550 mm Height table - lower edge portal 250 mm - portal longitudinal guide right un left on the table - adjustment via very fine threaded spindles with handwheel - Quick adjustment via electric release - Projector screen 150 mm with crosshairs and coordinates MEOPTA PMP100 - 2 pieces clamping devices for tool measurement - on substructure with shelf and drawer Space requirement L x W x H: 1100 x 700 x 1650 Weight 560 kg good condition; used

Spot hump welding machine NIMAK type PMP 5 / 35 spot welding machine, projection welding machine Fabr. No. 88100 Year of construction approx. 1988 Power at 50% ED 35 kVA Radius 250 - 450 mm Working stroke 40 mm Electrode force 100 - 460 kp infinitely variable Electrode force at 6 bar 460 daN Operating air pressure 2 to 6 bar Electrode arm 60 mm Electrode holder 30 mm Insert electrodes Cone MK 2 17.78 mm Arm distance 200 / 400 mm Adjustability of the electrode holder 200 mm Connection load 83 KVA Mains connection 380 volts, 50 Hz - 4-times control - stepless power adjustment - single points and series points - bulging electrode guide - water-cooled (without cooling unit) - electric foot switch Space requirement L x W x H 1200 x 650 x 1500 mm Weight 300 kg good condition; used

Type: PV016R1K1T1NGCC, Vg max :16 cm³, P dmax :350 bar, nmax: 3000 U/min, Pmax: 420 bar, Code BF Serie 4545 BERGEN BRM, WARTSILA, DEUTZ KHD/MWM, MAN B&W, JENBACHER, ABC, PIELSTICK , GUASCOR, MAK, CATERPILLAR, VOLVO, WICHMANN, PUMPS, SACM, SEPERATOR, COMPRESSSOR, FILTER, PUMPS, VACUUM SAVAGE SYSTEM, HEAT EXCHANGER & COOLER. Spares are available and all kinds of spare parts can be given. Please contact us for your questions. EVE International AS E-Posta : info@eveinternational.com.tr Phone : +90 0216 519 2707 Fax : +90 0216 519 2720

DALEX two-hand safety relay ZS 2-1 --- 24VDC for legacy Dalex PMS systems

Stock No. 2587 1 used pelletizing plant, functionally tested, Throughput up to approx. 600 kg/h depending on the material, consisting of: 1 volumetric dosage Extruder Plastmachines Type PME 100 Single screw Ø 100 mm – 35 L/D Drive 134 kW – DC 1x degassing zone Melt filter BKG type K-SWE 121 RS – backwasher incl. Hydraulics 3 kW Strand head with holes 20 x Ø 3.5 mm Continuous cooling pool 400 x 4000 mm with strand guide rollers Strand extraction Strand pelletizer SG 300 ResoTec control / control cabinet Viewing by arrangement - at short notice More pelletizing lines / extruders available from our Wuppertal plant & ready for demonstration

The machine is well maintained and fully functional. Blender for cream and sponge cake dough Capacity 200 liters with adjustable stirring speed and 3 adjustable stirring times made of stainless steel Item condition: maintained Availability: immediately

Econiche data: Drilling rig 345-31 WHT-No. 147-0338 SNr. 103 563 Linear unit M4: Fanuc, type: Beta is 4/4000 HV A06B-0064-B203 Motor: plug version with resolver Resolver line and motor cable: PM505CBL2040B 10 319V 50Hz 2.3A 3.5Nm , 3000 rpm Drill tape M3: Astro, type: ASM 46 SG10 3-400V 50/60Hz 65/60mA 4/4,8min-1 Spindle drive M1: Bonfiglioli, type: BN 132 S 6 No. 802002 Cod: 8D62030016-519951 230V / 460V 13.5A / 7.8A 50H7 940 min' 3kW cosQ 0.76 IP 55 IsKI.F Lifting drive M2: Fanuc, Type: Beta 22/2000 HV is A06B-0086-B503 Motor: in plug version with resolver and brake Resolver line and motor cable with brake: PM505CBL2020B 5 448V 50Hz 3.4A 22Nm, 2000 rpm Insert tape M10 : SEW / Maschienenbau Kitz, Type: WF 10DT56LA/TF Product number: 01.1230640901.0001.08 230V / 400V 50Hz 0.80/0.46A 0.12kW 1600 rpm cos 0.68 Delivery belt M11: SEW / Maschienenbau Kitz, Type ...

150 Litre kettle. Gas energy / Propan-butan

: neu : ca. 4 Monate ab Auftragse : Taiwan : 46400 € : 951.2 € : 40 -3200 U/min : ISO 40 : 600 x 500 x 400 mm : 1000 x 500 mm : 3,75 kW : 1814 kg : 1000 mm/min : 8 : 14 x 63 mm : 300 kg : 600 mm : 500 mm : 400 mm : 0 - 600 mm/min. : 0 - 600 mm/min. : 40 - 3200 : 40 - 3200 : +/- 90° ° : 100 mm : manuell : 3,75 kW : 1200 x 250 mm : 160 - 660 mm : 95 - 495 (2. T-Nut), 180 mm swiveling operating panel 3 axes digital read out Fagor 40i Innova motor for horizontal- and vertical spindle: 3,75 kW feed motors with inverter for X/Y/Z: 0,75 / 0,75 / 0,75 kW ball screw spindles for X/Y/Z axes manual gear box for spindle speeds 1 pc. long milling arbor 27 mm 3 pcs. recustion sleeves (MK1, MK2, MK3) 1 pc. drawing bar ISO40 for horizontal or vertical spindle spindle protection with switch table safety guard with doors with switches outer arbor support for horizontal spindle LED work lamp automati ...

Festo pneumatic cylinders Pmax 12 Bar End positions with slot nuts Length 92 cm

SPINNER TTC 300- 52 SMMCY CNC Lathe YOM 2012 Twin-opposed-spindle, twin-turret lathe Control FANUC 31iT Swing diameter 400 mm Max. turning dia ~200-250 mm Max. turning length 400 mm Travels: X1 180 mm, X2 110 mm, Z 450 mm, Y +40/-40 mm Rapid traverse: X1 15 m/min, X2 15 m/min, Z 24 m/min, Y 15 m/min With C-axis Main Spindle 1: Motor spindle with water cooling With hollow shaft measuring system for C-axis drive mounted directly on the spindle shaft Spindle bore 52 mm Spindle speed 0-5000 rpm/ 19 kW Performance Pmax 23,5 kW Torque 150 Nm Spindle nose A6/DIN Sub-Spindle 2: Motor spindle with water cooling With hollow shaft measuring system for C-axis drive mounted directly on the spindle shaft Can be moved on a slide to take over spindle 1 Spindle speed 0-7000 rpm/ 8 kW Performance Pmax 13,8 kW Torque 189 Nm Spindle nose 100 mm Turret 1: At the top of the ...

Pressure relief valve HAWE MVP 13 HR 3018 2455237 0009 pmax.: 700 bar Qmax. 5 l/min Panel construction: Flange: 50 x 30 mm New ! Dimensions: 50 x 30 x 82 mm

Prefamac PMOU80 Moulding machine 2011, stainless moulding machine, 80Kg capacity, adjustable temp control, with vibrating table, 1Ph

Prefamac PMOU80 Moulding machine 2011, stainless moulding machine, 80Kg capacity, adjustable temp control, with vibrating table, 1Ph

Overview This brewhouse was manufactured in 2022 by Italian company Spadoni. The owner had purchased all the equipment to set up a microbrewery but then decided to shift the production of his beer to a bigger brewery, producing for him. Therefore, the brewhouse has not been used so far. Techn. Details Output: 25-30 hl in one brewing process Dimensions: 4.722mm x 4.401mm x 3.784mm  Brewhouse mounted on stainless steel frame 3 vessels  Mash tun Leuter tun Wort kettle + whirlpool Plate heat exchanger Scope of delivery Grist mill | Bühler AG | Smartgrist | 2022 Steam generator | ABC Perello | PMY - 12 | 2022 | 1900 m³, pressure: 7.8 bar  Water tank | Isma S.A. | 2022 | 50,000l | diameter: 3,000 mm, height: 7,400 mm  Hot water tank | agrovin | 2021 | 15.000 l   Cold water tank | agrovin | 2021 | 15.000 l  10 fermentation tanks | agrovin | 2021  7x 12.500l 3x 15.000l Water softener | ...

Type: ELMO-G 2BH1 490-1AH13 2-flutig pmax.: 180 mbar Motor: Siemens Power: 0.43 kW Voltage: 230/ 400 V Frequency 50/ 60 Hz Protection class: IP54 New !

pneumatic quick release SPEEDY BLOCK 125/AP3 AO041 Clamping force: 160 / 70 daN Opening angle: > 90° Pmax.: 6 bar New, with documents ! Dimensions: 200 x 48 x 70 mm

Electronic Module, Communication Module AKT 0100-71278 VME Communication with PMC Cards Revision: 01 CVD COMM. INTERFACE used, tested ! Dimensions: 262 x 186 x 20mm

Industrial Controller PMA KS94 9407 923 00221 90 - 250 V AC 48 - 62 Hz 6.5 VA used, tested ! Dimensions: 95 x 95 x 175 mm

Return filter HYDAC RFP 160 G20 C Pmax 30 bar 0,9 l New ! Dimensions: 130 x 120 x 230 mm

Filter PALL REG1OG5BW23E Pmax: 40 bar Tmax: 80 °C Volume: 1.6 l stainless steel housing ! Dimensions: 345 x 185 x 142 mm

Filter TRAUB 317987 1-349D1 Pmax.: 210 bar Qmax: 60 l/min Ersatzteil für TRAUB TND300 ! used, tested ! Dimensions: 225 x 85 x 100 mm

Pressure switch with intuitive switching point setting IFM PK6522 p: 0 - 100 bar pmax.: 200 bar 9.6 - 32 V DC used ! Dimensions( sensor ): 125 x 45 x 28 mm

Pressure relief valve BOSCH 0 811 109 102 ( 0811109102 ) Preg: 160 bar Pmax: 315 bar used, tested ! Dimensions: 165 x 47 x 40 mm

Pressure relief valve BOSCH 0 811 109 118 ( 0811109118 ) Preg: 160 bar Pmax: 315 bar used, tested ! Dimensions: 245 x 47 x 40 mm