We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
120,893 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
new
Planetary mixer model: PM800 - Z (80 liter) NEUMASCHINEMit 1 stainless steel boiler, 1 Stainles, 1 broom, 1 dough hook and 1 tank car. addition: 60 litre waste, on AnfrageGarantie: 24 MonateLieferung: within Germany, House freely with their own vehicle.
new unit, vertical designed roller sizes : D = 355 x 900 mm width with post-cooling rollers with edge-trim device with puller, comeplete unit moveable by motor
used
vertical smoothing unit, 900 mm 3 rollers, D = 355 mm 40 m/min pneumatic delivery of the rollers with cooling rollers, trimming station, extractor and chassis
used
we design small pipe / profile lines on request, also coex
used
Extruder 70 mm - 24 L/D with pipe head up to 63 mm, calibration tank 6000 mm Caterpillar extractor, saw
used
complete "package" with perforated disc, siebronde, nozzle plate we also supply new nozzle plates according to your requirements Monofilament systems on request and specification
used
New extractor frame 900 mm on steel construction. 2 winding capoles are used underneath for edge-straight Winding positioned. The winding capoles are fitted with new pneumatic Expansion winding shafts for 76 mm bobbins. with electric drives
used
new
Plant for the production of filament for use in 3D printers Capacity up to 10 kg/h consisting of 30 mm extruder, stainless steel trough, puller and winder with traverse guide
used
used
new
Single-screw extruder with new 7,5kW drive, new gear box, new cylinder and new screw 30 mm - 28 d, nitrated new ceramic heating elements, cooling fan, temperature sensors Control cabinet integrated in the machine frame Machine frame on wheels Stainless steel hopper
used
1 LABEL DIE CUTTING MACHINE PMC MODEL F -Year of manufacture 1990 -Four-sided guiding system jogs and holds the stacks on all four sides during the die cutting operation for precise die cutting. -Full control of stacks through feeding, guiding and die cutting eliminates manual jogging. -Convenient adjustment of guides and die with clear view of die register on labels speeds set-up and reduces waste. -Labels are safely loaded outside die cutting area. -Typical uses: labels, note pads, credit cards, identification tags, postal cards, game cards, 3-way trim, round cornering. -Materials: paper, plastic, vinyl, Mylar, paperboard Specifications Model F: Maximum Pre-cut Size 184mm x 184mm(7.25” x 7.25”) Minimum Pre-cut Size 32mm x 32mm(1.25” x 1.25”) Maximum Die Cut Size 178mm x 178mm(7” x 7”) Minimum Die Cut Size 25mm x 25mm(1” x 1”) Recommended Tri ...
used
1060 has 475, air capacity: 20,000-24,000 m³/h
used
Gear, stin gear -Drive shaft: Ø 19 mm -Drive shaft: Ø 19 mm hollow shaft -Dimensions: 260/240/H180 mm -Weight: 12 kg -Translation: 1:2.9
new
Extruding system with cross-spray head for sheathing of small profiles/filaments consisting of: 30 mm extruder with tool, water bath, extractor and winder Optional with memory for role change
new
Compounder with segmented screw elements, cylinder with a degassing opening with hot tee, stainless steel housing, swivel
new
Lifting capacity: 600 Kg Magnetic field: 228 x 122 mm weight: 0,022 t dimensions: 0,23 x 0,122 x 0,112 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
Lifting capacity: 300 Kg Magnetic field: 228 x 122 mm weight: 0,016 t dimensions: 0,23 x 0,122 x 0,112 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
Lifting capacity: 1500 Kg Magnetic field: mm weight: 0,045 t dimensions: 0,44 x 0,22 x 0,25 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
Lifting capacity: 1000 Kg Magnetic field: 258 x 176 mm weight: 0,031 t dimensions: 0,26 x 0,18 x 0,16 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Brake drum lathe make PMD type IRIA 2Year of construction 1981 for the processing of truck brake drumsTechnical specifications:External dimensions approx.: 1400 x 800 x 1500 mmWith- 5 automatic feeds 0.05 - 0.25 mm / min.used, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Filling monoblock PMR Year: 2014 Speed: 800 bph Direction: Clockwise Volumetric filling Cap: twist-off Ø 43, Ø 70 deep, Ø 82 Many bottles format. Safety protections.
new
Lifting capacity: 100 Kg Magnetic field: 70 x 60 mm weight: 5 Kg dimensions: 100 x 120 x 120 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Capacity: 63 ton Throat depth: 280 mm Ram stroke: 8 - 100 mm Slide adjustment: 80 mm Shut height (stroke down, adjustment up): 246 mm Distance table to ram: 346 mm Table surface area : 900 x 550 mm Slide area: 450 x 300 mm Number of strokes: 100 s.p.m. Height of the bolster plate: 80 mm Table height over floor: 800 mm Required power: 5,5 kW Dimensions L x W x H: 1380 x1258 x 2810 mm Weight of machine approx.: 4,3 ton
used
Press capacity: 250 ton Ram stroke adjustable: 20 - 200 mm Slide adjustment: 140 mm Daylight: 560 mm Table surface area : 1600 x 1000 mm Slide area: 1500 x 900 mm Number of strokes: 20 - 75 s.p.m. Free frontal opening L-R: 1680 mm Distance between the columns F - B: mm Table height over floor: 805 mm Die Weight total: 2700 kg Required power: 41 kW Dimensions L x W x H: 2850 x 2880 x 4395 mm Weight of machine approx.: 25 ton
used
Press capacity: 160 ton Ram stroke adjustable: 20 - 130 mm Slide adjustment: 100 mm Daylight: 560 mm Table surface area : 1500 x 800 mm Slide area: 1400 x 800 mm Number of strokes: 20 - 60 s.p.m. Distance between the columns F - B: 520 mm Height over floor approx.: 3550 mm Required power: 48 kW Weight of machine approx.: 26 ton
used
Stock Number: 3785 ECCENTRIC PRESS Manufacturer: PMB, Type: EPFT 100 Machine NO.: 004301, Year of manufacture: 2002 Specifications: Table size 780 x 590 mm Stroke length 8-120 mm Number of strokes per minute 55 Projection 300 mm Operating height 395 mm Total power 7.5 kW Pneumatic clutch. Gear ratio. Hydr. Overuse protection. Weight: 5500 kg
new
Lifting capacity: 2000 Kg Magnetic field: mm weight: 80 Kg dimensions: 0,5 x 0,25 x 0,3 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Temperature controller, temperature sensor, setting for temperature, signal converter, temperature converter, temperature monitor, thermostat, transmitter -Manufacturer: PMA, temperature control -Type: CI 45 -Output: 500 VA, 250 VAC, 2A -Dimensions: 125/22/H110 mm -Weight: 0.2 kg
used
Angle flange, flange, cable entry, cable protection -Nominal width: 48 mm -Protection type: IP 66 -universal: applicable -Packaging unit: 10 pieces -Price: per packaging unit -46x bags: 10 pieces each -Dimensions: -Weight: 1 kg/piece
new
Lifting capacity: 2000 Kg Magnetic field: 350 x 150 mm weight: 70 Kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
PMA 650 C UV COATING MACHINE BANNED WITH SPECIAL UV SOLUTION VARNISHING PROCESS - UV LAMPS MAXIMUM WORKING WIDTH - 650 MM THICKNESS OF THE DOCUMENT TO BE VARNISHED - 0.2 - 2 MIN. VARIABLE SPEED - UP TO 7-8 M. / MIN. LIQUID RECYCLING - YES MAXIMUM CONSUMPTION 4800 W
used
VARNISH WITH SPECIAL UV SOLUTION VARNISHING PROCESS - UV LAMPS WORKING WIDTH - 650 MM DOCUMENT THICKNESS - 02 - 2 MM VARIABLE SPEED - UP TO 7-8 M/MIN. LIQUID RECYCLING - YES MAXIMUM CONSUMPTION - 4800 W. WEIGHT - 120 KG MEASUREMENTS - 1250 X 122 X 580 MM
used
Stork PMT B.V. special equipment, model: 9900, type: 3763957, year of construction: 2010, dimensions: 1850 mm x 1300 mm x 1500 mm.
used
Stork PMT B.V. automatic transfer system, model: TREC, type: 3763246, serial number: 10076226, year of construction: 2010, dimensions: 2500 mm x 1700 mm x 2200 mm.
used
Stork PMT B.V. intestine/gall-bladder remover, type: nutech, dimensions: 2000 mm x 800 mm x 1700 mm.
used
Cylinder head face milling and grinding machine in good condition. Grinding segment wheel diameter 420 mm Table clamping surface 1600x360 mm Table travel 1800 mm Distance between machine table and machine head 825 mm Extensive range of optional accessories Wet machining has never been carried out with the machine
used
PME inline embossing station for integration into an existing laminating line (coarse linen): - Rubber counterpressure roller (diameter: 250mm) - A water-heated embossing roller (diameter: 254mm) - Web tension control with load cell - Pneumatic adjustment of the counterpressure roller - Pitching pressure in the pinch gap 100kN - Main drive with 5.5 KW - Maximum mech. Speed: 60m/min. - Maximum working width: 800mm - Connected load: approx. 30KW - Power consumption: approx. 20KW - Compressed air requirement: approx. 2.5 Nm³/h at 6 bar - Easy to change the embossing roller - Year of construction 2013
used
Rotatable support table between 0° and 180° with latching points, thus 3-sided machining in one clamping Speed per minute: 12.0000 Pneumatically controllable copy pens Pneumatic material clamping Minimum Quantity Spraying Device Pneumatic lifting movement can be switched between slow and fast Weight: approx. 600 kg
new
- min. Kantendicke: 0,4 mm - max. Kantendicke: 3 mm - max. Kantenhöhe: 65 mm - Geschwindigkeit: 2, 4, 5, 6 m/min - Temperatur: 120C - 200C - Inhalt Leimbecken: 230 cm³ - Aufheizzeit: ~8 min - im Karton - Spannung: 230 V, 50/60 Hz - Leistung: 830 W
new
- min. Kantendicke: 0,4 mm - max. Kantendicke: 3 mm - max. Kantenhöhe: 65 mm - Geschwindigkeit: 2, 4, 5, 6 m/min - Temperatur: 120C - 200C - Inhalt Leimbecken: 230 cm³ - Aufheizzeit: ~8 min - im Systainer T-Loc IV - Spannung: 230 V, 50/60 Hz - Leistung: 830 W
used
Leitz Coordinate Measuring Machine Leitz PMM-G 50.30.20 Dimesnion: 5000x3000x2000 Machine is in excellence working condition.
used
Impression work - Numbering ink to number for Heidelberger Speedmaster SM52 - Printmaster PM52 - very well maintained and little used - Built: 2002 - Colour box with colour rollers - Numbering wave - with 2 seat rings - with 2 - switching arms - with 10 numbering works
used
Packing unit PMN Type BSM 600 + LPM 600,max item H 300 x W 600 mm.
used
Heidelberger Druckmaschinen Spare part for Speedmaster 52 / PM52 - Pliers grab kpl. for the perfecting SM52 / PM52 - fully automatic - Used fully functional - Spare part.-No.: MV.031.491 / 08 - Delivery - Immediate
used
Electronic module, memory card AMT PME33 PME-33-0299 000545 SC 150999 used, tested ! Dimensions: 265 x 200 x 20 mm
used
Electronic module, measuring card AMT PME33 PME-33-0299 used, tested ! Dimensions: 265 x 205 x 20 mm
used
Lubrication pump with tank VOGEL PMS 5 A Q 57 l/min P 0.1 bar 220 / 400V motor: 0.12 kW Dimensions: 400 x 200 x 375 mm
used
Dosing device EMD PM50/25-UY 48-GB0-60:1 40 rpm 48 V DC Container capacity: approx. 5 l inclusive 2nd mounting foot ! New ! Dimensions: 480 x 400 x 300 mm