133,956 used machines on RESALE, but how to find them? Machine Search
Marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube -for: scribing plate, clamping plate, alignment bench ... -Prism width: - mm -Dimensions: 210/85/H225 mm -Weight: 10 kg
STORK LASER SCREEN ENGRAVING EQUIPMENT ( ROTARY TEXTILE PRINTING ) LASER ENGRAVER MAKE : STORK TYPE : STK-2000 YOC : 1988, RENEWED / MAJOR OVERHAUL 2012 LENGTH : 310 CM WITH END RING GLUING UNIT TYPE : STORK SCR-85 LACQUER COATER : TYPE : STORK RSE 3100, Q4B1/2000 YOC : 2000 2 DRYING UNITS SCREEN INSPECTION & WASHING EQUIPMENT COOLING SYSTEM SOFTWARE & HARDWARE FOR ENGRAVER PIPING, DUCTING, CABLING ETC ONE LOT OF SMALL EQUIPMENT USEFUL FOR SCREEN PRODUCTION
Water Pump for MWM 232 for Sale MWM Part Number: 6.232.0.952.0020 ; 623209520020 ; 623203810470 ; 623207310010 ; 623409520090
Bosch Injection Pump for MWM 232 for sale Bosch Number: 62801845
MWM 232 / 234 Water Pump MWM Part Numbers: 6.232.0.731.0010 ; 623207310010
Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Mouth size: Ø 250 mm -Through hole: Ø 78 mm -Weight: 30 kg
electric magnetic plate, chuck, magnetic chuck, magnetic chuck -Clamping surface: 1000 x 255 mm -Connection: 100 volts DC -Dimensions: 1000/255/H98 mm -Weight: 140 kg
Two-jaw chuck, 2 jaw chucks, vice, face plate -Chuck size: Ø 250 mm -centrically exciting: -Weight: 35 kg
Motor 1.3 kW/400 V/50 Hz/3 A, swivel -20° to +70°, pneumatic clamping, suction nozzle 80 mm
diameter: 250 mm total power requirement: kW weight of the machine ca.: 0,05 t dimensions of the machine ca.: m 1 pc. three jaws chuck - diameter 250 mm bore 80 mm fastening: 4 pcs screws 135 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 200 mm -Passage: Ø 50 mm -one set: hard interchangeable jaws -Weight: 15 kg
Three-jaw chucks, three-jaw lathe chucks, power chucks -Chuck size: Ø 250 mm -Short taper mount for: bayonet mount, taper size 8 -Weight: 41 kg
Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 240 mm -Camlock: 3-bolt mount, hole circle Ø 140 mm, short taper Ø 102 mm -Throughout: Ø 77 mm -Weight: 29 kg
Three-jaw chuck, three-jaw lathe chuck -Mouth size: Ø 250 mm -Recess: Ø 200 mm -Bolt circle: 3 x 226 mm -Passage: Ø 76 mm -Weight: 25 kg
diameter: 250 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m 1 pc. three-jaws chuck - diameter 250 mm bore 75 mm with flange plate for mounting on milling table 0320 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
diameter: 250 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m 1 pc. four jaw chuck - diameter 250 mm bore 75 mm KK 140 fastening: 4 pcs. screws M 16 / 170 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Three-jaw chuck, three-jaw lathe chuck -Mouth size: Ø 250 mm -soft: interchangeable jaws -Bayonet: Short cone flange, cone size 6, cone Ø 106 mm, bolt circle Ø 133.4 mm -Passage: Ø 81 mm -Weight: 22 kg
Three-jaw chuck, three-jaw lathe chuck -Mouth size: Ø 250 mm -soft: interchangeable jaws -Recess: Ø 210 mm -Bolt circle: 3 x 230 mm -Passage: Ø 80 mm
Conveyor belt / belt flap / accumulation conveyor Working height approx. 850 mm, can be adjusted. Length approx. 800 mm Width approx. 450 mm Equipped with photocell to stop product when downstream machine occupies. Equipped with function pass-through flap -> straps stop as soon as the flap is lifted. Equipped with its own drive and controls. Fixed transport speed, no frequency converter installed. Machine runs flawlessly. New conveyor belts were installed.
Three-jaw chuck, three-jaw lathe chuck -Mouth size: Ø 200 mm -hard: interchangeable jaws -Base plate for: machine table -Passage: Ø 54 mm -Weight: 22 kg
Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 250 mm -Rezess: Ø 194 mm -Hole circle: 3 x 214 mm -Throughout: Ø 70 mm -Weight: 17 kg
Anlaser for MWM 234 Motor: - 24V - 5.4kW - 9 teeth Bosch Number: 0001416024 / 0 001 416 024
MACC Metal Circular Saw K 225 Cutting capacity round up to 65 mm Saw blade 225 mm Vise opening 75 mm Speed 52 rpm Motor 0.75 kW, 230 V Weight approx. 32 kg
Key data: 220 mm
MACC Metal Band Saw Special 280 CSO Section cap. up to 220 mm round Speeds 32/66 m/min. Coolant pump Attack Motor 2-stage 400 V incl. machine base Weight approx. 230 kg
Three-jaw chuck, three-jaw lathe chuck -without: interchangeable jaws -Mouth size: Ø 200 mm -Recess: Ø 162 mm -Bolt circle: 3 x 180 mm -Passage: Ø 52 mm -Weight: 13 kg
Description Cycle lathe Chevalier FCL-2660 Details Year of construction 2008 Machine no. A40307 C52 Height 2,150 mm Width 2,100 mm Length 3,900 mm Bed width 450 mm Bed height 1,000 mm Bed length 3,600 mm Face plate Ø 620 mm Forkardt Chuck Ø 315 mm Max. workpiece lengths 1,800 - 2,000 mm Turning diameter over bed 660 mm Turning diameter over support 400 mm Center height 330 mm CNC Fagor Cycle Control Lynette Ø 400 mm Outer and inner bolsters
Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 240 mm -without: interchangeable jaws -Throughout: Ø 77 mm -Weight: 18 kg
Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 250 mm -Adapter plate with thread mount: Ø 67 mm -Passage: Ø 51 mm -Weight: 27 kg
MACC Metal Band Saw TRS 275 Saw blade Ø 275 mm Max. vise opening 100 mm Engine power (2-stage) 0.95 / 1.32 kW Speed 40 / 80 rpm Connection voltage 400 V Fuse 16 A Weight 91 kg Without a base, but can be purchased separately.
Key data: 490 mm, 650 mm
Stock-No. 1105-04024 Type of machine CNC Turning- and Milling Center Make MORI SEIKI Type SL 2500 Y /650 Year of manufacture 2003 Type of control CNC Storage location FRANCE Country of origin Japan Delivery time immediately Freight basis ex Warehouse Price Technical details turning diameter 490 mm turning length 650 mm control MSX-805 max. bar capacity 65 mm Travel -X Axis 305 mm Travel -Z AXIS 690 mm Travel -Y Axis +50, -50 mm Max. Speed Main Spindle 4000 min-1 spindle taper 1 A2-6 C - Axis 0.001 ° Spindle bearing diameter 120/85 mm No. of tools in turret 1 10 Shaft Cross Cut 25 x 25 mm Shank diameter 50 / 32 mm Turret Change Time 0.25 s max. spindle speed driven tools 6000 min-1 rapid power traverse in X-and Z direction 30 m/min Rapids C - Axes 400 min -1 drive capacity - spindle motor 18.5 kW power capacity - driven tools 5.5 kW swing diameter ove ...
Fermentolevain Fermento Plant for the preparation and preservation of liquid sourdough with Dual Care system for the best flavors Control of the fermentation phase and preservation phase easy-touch control Mixing time and speed can be adjusted Stainless steel Stirring tools removable with overflow probe and alarm buzzer 2 agitators, double lid Floor and side scrapers for more quality Outlet height 535 mm Tank capacity 200/250 kg Cooling capacity per hour approx. 6°C falling DGUV V 3 tested Connection 400V / 50Hz / 3,3kW, 16A-CEE plug Dimensions: 1040 x 1300 x 1810 mm, WxDxH New machine with 12 months warranty Optional: Built-in scale Water connection with hand shower Cleaning Cycle Maintenance contract Service Package Many more bakery machines in stock!
Mikron Universal Milling Machine Type 21D Heidenhain Control TNC 355 Tool holder ISO 40 21 spindle speeds from 40 - 4000 rpm Clamping table 350 x 700 mm Displacement distances: X=450 mm / Y=400 mm / Z=400 mm 400 V Control voltage 24 V Total weight approx. 2410 kg
Stock number: 3898 CIRCULAR SAW Manufacturer: KALTENBACH, Type: TL 255 Specifications: Size sawing capacity 80 mm Ø Miter 45 - 90 + 30 degrees Size blade diameter 250 mm Weight: 60 kg
Belt / roll width: 30 mm Mains voltage: 230V, 50Hz Paper from 70 g/m², film from 80μ (duplex film)
Three-jaw chuck, 3-jaw chuck -Type: DHB 200x3x5 TGL 30 2332 -Mouth size: Ø 200 mm -Passage: Ø 54 mm -max.: 3000 rpm -Short taper mount: Ø 105 mm -Weight: 24 kg
Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 270 mm -Throughout: Ø 77 mm -Weight: 27 kg
ALDURO Professional Knife WASU 50-230V for perfect results when sharpening your knives ! Backward Sanding Belt 50 x 1000 mm Peel-off felt disc Motor 0.6 kW, 230 V Speed 2850 rpm Belt speed 15 m/sec. Weight approx. 20.5 kg
Inv. Num. : 7827 Type: LKT 250D Producer: PRESSMONT Created: GO 2019 Parameters: Compressive force: 2500 kN Ram stroke: 250 mm Machine weight: 21000 kg
Drive chain, triplex chain, roller chain -Size: 24B-2 1 1/2 x 1 inches -Length: 1.25 m -Number: 13x chains available á 1.25 m -Price: per chain -Weight: 26 kg/piece
Clamping angle for workpiece clamping -Dimensions: 200/320/H220 mm -Thickness: 25 mm -Groove: 20 mm -Surface: milled -Weight: 22.7 kg
Power supply, converter, converter, power supply unit -Type: XT40.241 -Input: 3AC 400 V -Output: DC24V/40A -Dimensions: 250/170/H140 mm -Weight: 1.6 kg
Siemens Control 828 D Circulation over bed 560mm Circulation via cross slide 390 Circulation via recess 810 mm Center width 3000 mm Headstock Borungh D1-8 Spindle Nose Bushing MK7xMK5 Spindle speed 3 steps, max 2500 Travel Quill 200 mm Diameter quill 75 mm Bed width 345 mm Overall length 5170 mm, width 2100 mm, height 2230 mm Net weight 4000 kg Accessories 2 x chip conveyor, glue bar lathe chuck, turret, quick-change holder, El. Handwheels. 3 x steady rests, coolant system, manuals
Function generator, oscilloscope -Frequency range: 0.2 Hz to 240 kHz -Dimensions: 225/225/H85 mm -Weight: 1.2 kg
Description Cycle lathe Chevalier FCL-2460 Details Height 1,950 mm Width 1,600 mm Length 4,100 mm Bed width 410 mm Bed height 850 mm Bed length 2,300 mm Face plate and chuck possible by arrangement max. workpiece lengths 1,500 mm Turning diameter over bed 600 mm Turning diameter over support 360 mm Center height 300 mm CNC Fagor cycle control function untested Lynette possible by arrangement 4-speed revolver
diamond core drilling machine -Drill stand -vacuum pump -Core drill: Ø 202 mm (picture) -Machine dimensions: 500 x 370 x H1070 mm -Weight: 53 kg
Permanent Magnet Motor, Permanent Magnet Motor, Electric Motor, Perm Magnet Motors, Servo Motor -Max. Speed: 1500 rpm -Shaft: Ø 35 mm -Number: 1x motors available -Price: per piece -Dimensions: 670/206/H245 mm -Weight: 50 kg/piece
Manufacturer: Alfa Laval Model: MRPX214 TGV-74 Function:Whey separator/ Cream separator Capacity: 10,000- 12.500 Litres/ Hou rMotor power:15 kW Electrics: 380V/ 50 Hz/ 3 Phase Bowl speed: 1450 rpm Tools Base PlateNew Control Panel New Water system ( Valves, pressure vessel, connections, etc.) Service Spare Parts : Dairy Machinery UK
Permanent Magnet Motor, Permanent Magnet Motor, Electric Motor, Perm.Magn-Mot, Perm Magnet Motors, Servo Motor -max. speed: 1500 rpm -Shaft: Ø mm -Quantity: 1 piece available -Dimensions: 670/206/H245mm -Weight: 51 kg/piece
maximum number of results exceeded
please refine your search
