pm 52 2 used for sale

4 printing inserts(cassettes) for Muller Martini Grapha Progress 520 format : 25.5". No damages, in very clean and good condition, ready for production. Pitch 1/4 " Blanket cylinder is clamped. Loaded on wooden pallets. Can ship worldwide.

8008 CM Art. item / Anno/Year: 06-01/90, Hz 50, 380 V, 100 KVA 50%, 250 KVA, 8200 Amp 100%, 36000 Amp short circuit, 710 da N pressure, 300 l/h H2O Water Cooling - Made in Italy The spot welding machine was used weekly about 10 years ago and was fully operational at that time. The machine can be connected at any time and can be checked by qualified personnel by the potential buyer with the product to be manufactured in the future. The machine can be picked up at the current location – as it stands – without warranty and other services for 2800.00€ VHB or shipped plus shipping costs. Alternatively, we can have the machine checked by external specialists, in which case the price is approx. 4500,00€.

Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder -Manufacturer: Rexroth, pneumatic cylinder type 521 175 001 0 -Stroke: 50 mm -Piston: Ø 40 mm -Piston rod: Ø 18 mm -Max. pressure: 10 bar -Dimensions: 230/52/H52 mm -Weight: 1.7 kg

Flame cutting system, torch, oxyfuel cutting system, cutting torch, welding torch, hand cutting torch, welding kit -Manufacturer: WMW, Hand cutting torch cutting insert with lever valve -Type: 520/1 EN ISO 5172 -Number: 6x cutting torches available -Price: per piece -Dimensions: 465/100/60 mm -Weight: 1.1 kg/pc.

Solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block, switching valve, pressure build-up valve -Manufacturer: Festo, switching-on valve -Type: MS6-EE-1/2-V24-S 527682 -Operating pressure: 4 - 18 bar -Quantity: 1x valve available -Dimensions: 180/100/H290 mm -Weight: 1.3 kg

Decoiler Coil weight: 4,5 ton Material width max.: 520 mm Coil exterior diameter: 1600 mm Expansion range: 460 - 530 mm Leveller / Straightener Material width : 20 - 400 mm Number of levelling rolls: 7 pcs. Diameter of the levelling rolls: 60 mm Number of pull out rolls: 4 pcs. Diameter of the pull out rolls: 60 mm Material thickness: 0,4 - 3,5 mm Feeding speed: 2 - 10 m / min Roll feeder Material width max.: 310 mm Material thickness: 3,0 mm Material thickness at max. width: 2,8 mm Material thickness at max. cross section: 850 sq mm Number of feeding rolls: 2 pcs. Diameter of feeder rolls : 80 mm Feeding speed: 104 m / min Required power: 1,5 kW

Semiconductor relays, switchgear, switching components, semiconductor contactors, relays -Manufacturer: Omron, DIN rail solid-state relays -Type: G3PJ-525B -Number: 3 relays available -Price: per piece -Dimensions: 100/20/H100 mm -Weight: 0.3 kg

Manufacturer: Esa Steuerungsdiplay, Type: VT 520G, FREE TEXT: war verbaut in Spritzmaschine Cefla,

Manufacturer: Celaschi, Type: TSA 520, Year: 1987, Maschinensteuerung: max. 290, Motore Maschine 1: 150, Magazine: 150, Schrumpftunnel: 2x3, Min.-max. workpiece height in mm: 5,5, Working hight min-max mm: 5,5, Cam distance mm: 5,5, Year :1987

Manufacturer: 2 StückPerske, Type: Ritzmotor Homag FPL 526, Motor with gear: KNS 51.14-2 D, From machine: Homag Maschine, Spindle length mm: ca.60, Diameter of the spindle mm: 30, Power kW: 1,0/2,0, Volt/Hz: 50-60-120, pm: 2750/5700/3380/6920, Motor with gear: KNS 51.14-2 D, Price per unit Euro: 600, FREE TEXT: Spindeldurchmesser 30/Länge mm ca. 55 mm,

Single Needle Double Lockstitch Flatbed Machine

Bonding/crimping of toe caps; with preheating device; Spray gluing device (latex adhesive) and pressing device

Limit switches, push buttons, safety switches, position switches -230 V 4 A AC-15 -24 V 4 A DC-13 Price: per piece -Quantity: 10 available -Weight: 0.5 kg

grinding length: 600 mm grinding width: 200 mm workpiece height: mm total power requirement: 7,5 kW weight of the machine ca.: 2,3 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bausch Advanced Type 529 IV bag filling & sealing machine with Telstar aseptic isolator system, sequence of operation: VHP Chamber (Decontamination) - Debagging/Bag loading table - IV bag infeed conveyor - Laser engraving - Robot loading - Starwheel transport - Gas purging – Filling (product tank/buffer vessel with 20 litre capacity, mass flow measuring system with 2 flow meters, filling accuracy +/-1.0%, CIP/SIP) - Stoppering - Discharge/Reject Robot - Discharge Chute - Reject Chute - Weigh station/discharge conveyor, Mettler Toledo IPC (in process check weighing) system is capable of performing 100% weight verification of each bag. Fully processed bags exit the discharge conveyor and are transferred to the MettlerToledo scale, where they are weighed. Allen-Bradley ControlLogix PLC with Caitron CR17 touchscreen, machine floor space 4590 x 2649 mm (LxW), machine working height 900+/-30 ...

Size: 520 x 720 mm Equipments: 4 buckle plates vertical pile feeder 1 Knife

Decoiler Coil weight: 2 x 4,5 ton Material width max.: 520 mm Coil exterior diameter: 1800 mm Expansion range: 460 - 525 mm Leveller / Straightener Material width : 30 - 500 mm Number of levelling rolls: 11 pcs. Diameter of the levelling rolls: 90 mm Number of pull out rolls: 2 pcs. Diameter of the pull out rolls: 90 mm Number of pinch rolls: 2 pcs. Diameter of pinch rolls: 90 mm Material thickness: 0,8 - 8,0 mm Feeding speed: 3 - 30 m / min

Labyrinth housing seal -d: 90 mm -D: 145 mm -B: 24 mm Quantity: 15 available Price: per piece -Weight: 2 kg

Safety switch, TZ -Quantity: 7x Available Price: per piece -Weight per package: 0.4 kg

Wood milling inserts, knife inserts, form milling inserts -Blade width: 40 mm -Blade thickness: 2 mm -Price: complete -Weight: 0.3kg

Westfalia Revolution / minute: 10000

Cutting machine IDEAL 5221-05 EP, machine number 2848081, year of manufacture 2008, in good condition, immediately available Rsbr Sbovt Rt Ao Nwkou If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment.

Komt er aan

WB Busser can washer type WB 521 – For cans, jars and soft packaging, The can washer WB 521 the brand WB Busser offers an efficient and reliable solution for cleaning a wide variety of container shapes – including Cans, glass containers and flexible packaging., The system for sale was used to clean large cans., Dimensions / weight: Space requirement: L x W: 4,800 x 1,740 mm x H: 2,050 mm, Internal dimensions of the salt storage hopper: 500 mm x 400 mm x 400 mm,: Space requirement: L x W: 4,800 x 1,740 mm x H: 2,050 mm, power: Space requirement: L x W: 4,800 x 1,740 mm x H: 2,050 mm

Leather splitting machine Camoga C 520 L with 50cm working width

cutting diameter: 520 mm saw band length: 7239 mm cutting width: 1,3 mm Control: POSIMOD cutting range - square -: 520 x 520 mm feed length: 500 mm feed length: multiple: 4500 mm min. cut-off length: 6 mm length of rest piece min/max: 10 / 100 mm cutting speed: 20 - 130 m/min dimensions of saw-band: 7239 x 50 x 1,3 mm sawing motor: 5,5 kW total power requirement: 10,0 kW weight of the machine ca.: 3,8 t dimensions of machine L x W x H: 3,42 x 2,30 x 2,40 m - 2 column guided - Accessories: roller track 2500 mm length, chip conveyor, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Crane control system, controller, counter -Manufacturer: DEMAG, Crane control controller -Type: PRVZ2-A00 -Item No.: 52501784 -Voltage: 220 V -Dimensions: 110/60/H75 mm -Weight: 0.3 kg

Crane control system, controller, safety control system, safety switch, safety sensor, overload release power sensor, gear limit switch -Manufacturer: DEMAG, Crane control gearbox limit switch set, original packaging -Type: DGS 3 -142 -Item No.: 875 200 44 -Cardboard dimensions: 250/120/H115 mm -Weight: 1.0 kg

max. format 37.50 x 52 cm Year of construction 2000 Shed Feeder Suction belt table Remote register adjustment Tilt register remote adjustment Semi-automatic plate changing Ryobimatic Film Dampening Units AAC - Aqua Automatic Control System Dry pollinator Reading totalizer: approx. 72 million print Price on request. We supply and install worldwide.

chucking diameter: 250 mm greates pass round over bed: 500 mm swing diameter over slide rest: 290 mm centre distance: 850 / 1350 mm weight of the machine ca.: 2700 KG dimensions of the machine ca.: 2900 x 1953 x 1825 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Automatic Signature Punching Machine / Automatische Stanzmaschine JAMES BURN Lhermite EM 520 Baujahr / Year 1998 - Serial-No. 211661 Format Einlaufbreite / Size Infeed width 520mm Materialdicke / Thickness max. 3mm (32 pages 80 gr) Geschwindigkeit / Speed max. 10.000cycles/h Papierstärke / Paper thickness 70 to 300 gr.  James Burn Lhermite EM520 is an Automatic Signature Punching Machine.  It can be used for inline or offline production. With Feeder and Jogger delivery. The EM520 features the state of the art modular system for  punching and cutting signatures in line 

Fully automated casing in line with Co-Pilot pre-setting system Composed of : Co-Pilot computerized set-up and memory with touch-screen color monitors Star-wheel infeed to AR rounding and backing element with various size rounding irons to HL backlining unit with 1st position gluing & gauzing station 2nd position hot gluing, paper lining and head & tail banding EMP casing-in element with DBA case bending unit, heated former for cases, various formers for size changing Robotec RO concept glue station Delivery belt to Kolbus FE 604 – pressing and building-in machine with star-wheel infeed (s/n 2410) 6 stations of whole surface smashing and heated joint forming with touch-screen. Without Stacker Including accessories, tools & manuals. Technical specifications : Book block format, Max: 305 x 375 x 80 mm Min : 100 x 100 x 2 mm Mechanical speed : 20 – 60 cycles/min.  ...

A Strebig vertical panel saw is available. Horizontal/vertical cutting length: 4200mm/2200mm, max. cutting depth: 80mm, saw blade diameter: 300mm, saw blade bore: 30mm, speed: 4750rpm, machine dimensions X/Y/Z: approx. 5200mm/1200mm/2700mm, weight: approx. 800kg. An on-site inspection is possible.

HANS GROHNI GH 524 -Year 2008, Only one owner Sheet-fed offset press - Printing units: 4 colours straight Counter: 11 million Technical features: Speed max : 12,000 sph Paper size max: 520 x 370 mm Paper size min: 148x100 mm Paper thickness: 0,04 to 0,4 mms Print size: 510x360 mm Plate size: 510 x 410 x 0.15 mm Power : 12 Kw - 3 phase / 200V 50/60Hz 60A Dimensions: L. 4,34 mt. P. 2,20 mt. H.1,70 mt. Weight 8.000 Kg. circa Accessories included: - Fully equipped - SAPC - Semi automatic plate change - Laser duct inks - Chrome Cylinders - Rotary stream vacuum tape suction feed board - 2 feeder boards - Electromechanic double sheet detection - Electronic double sheet detection - Alcool dampening system with alcohol metering; cooling and re-circulation unit system - Powder sprayer device - Automatic roll wash device, plate cocking - Low pile - Tools, Docume ...

CNC Slant-Bed Turning Center manufactured in 2005. This CMZ TBI-520 features a maximum swing over bed of 520 mm and a maximum turning length of approximately 1,100 mm. It is equipped with a 12-station turret and a hydraulic 3-jaw chuck with a diameter of 315 mm. If you are looking to get high-quality turning capabilities, consider the CMZ TBI-520 machine we have for sale. Contact us for further details.

SPECIFICATIONS: Saw blade spacing: max. 2400 mm Tilt: 0° - 45° Saw blade: Ø 200 mm Equipped with multi-function display Installed power: 1.18 kW x 2

max. format 37.50 x 52 cm Year of manufacture 2004 Shed Feeder Suction belt table Remote register adjustment Tilt register remote adjustment Semi-automatic plate changing Ryobimatic Film Dampening Units Technotrans cooling unit Dry pollinator Reading totalizer: approx. 50 million pressure Price on request. We supply and install worldwide.

Mobile labeling machine for round bottles. Machine incl.: hot stamp system , 3-roller system. PLC: SIEMENS Simatic S7-300 Label dispenser type Pagomat 15/120E.

The scope of delivery includes: 01x Rectangular tube, used Material colour: orange Overall length: approx. 1,980 mm Center – center hole: approx. 1,935 mm Profile dimensions: approx. 52 x 42 mm (WxH) Material thickness: approx. 2.00 mm Borehole Ø: 9 mm Weight: 5.04 kg | Pcs. General information about the article: This item is only available for pickup. Any additional transport or shipment of this item is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery.

An almost like-new injection moulding machine Arburg is available. Clamping force: 1600kN, tie bar distance: 520mm, clamping stroke: 364mm, ejector stroke: 150mm, ejector force: 40kN, injection unit: 400, injection pressure: 2500bar. Machine dimensions X/Y/Z: approx. 6000mm/1800mm/2200mm, weight: approx. 6000kg, control: Selogica, operating hours: approx. 67h. Includes enclosure with clean air supply FilterFanUnit and removal robot. Documentation available. An on-site inspection is possible.

Year: 2008 Impressions ca: 86 mil - Max Format: 375x520 mm - PCS-G: consolle for ink and register control with touch panel. Electronic control of double sheets. Electronic control of the sheet missing. Pointing tape sucked. Photocells. Automatic ink regulation from consolle. RyobiMatic-D: alcool dampening with variable speed. Refrigerator Technotrans. Automatic Washing of blankets, rollers and impression cylinders. Semi-RPC: Semiautomatic Plate Changer. Circumferential, assial and diagonal registers. Extended delivery. High pile delivery. Powder spray Grafix. LED UV Books and tools.

Height=0.95 m, Overall length= 0.7 m, Overall width= 0.75 m,