130,399 used machines on RESALE, but how to find them? Machine Search
Three-jaw chuck, three-jaw lathe chuck -Mouth size: Ø 225 mm -Feed flange: M55x4 -Tip: 57 mm -Passage: Ø 50 mm -one sentence: hard-hitting jaws -Weight: 20 kg
Four-jaw chuck, four-jaw lathe chuck -Chuck size: Ø 250 mm -Bolt circle: Ø 230 mm -Recess:Ø 210 mm -Passage: Ø 80 mm -Scope of delivery: as per pictures, without additional jaws -Weight: 19 kg
Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Mouth size: Ø 200 mm -Recess: Ø 160 mm -Bolt circle: Ø 180 mm -Passage: Ø 55 mm -Weight: 14 kg
YOM 2009 X axis travel 28.000mm Y axis travel 6.500mm W axis travel 2.000mm Z axis travel 1.500mm Table dimensions 25.000X5.000mm Automatic head changer with Nr. 03 heads Nr.10 planos 5.000X2.500X300mm CNC SIEMENS 840 D nr.03 axes automatic head in continuos, spindle speed max 4.000rpm,56 Kw, HSK A 100 Vertical head max spindle speed 3.000rpm,56 Kw, HSK A 100 Angular head max spindle speed 3.000rpm,56 Kw, HSK A 100 High pressure refrigeration trough spindle (50 bar) ATC 120 positions
Lippert Belt Conveyor Belt Conveyor Aligner Conveyor Sorter GF 2640-650-500 RA2048 Technical data: Conveying length (NL): 2640 (1340 + 650 + 650) mm Framework width (NB): 1300 mm belt width (GuB): 500 mm height (BH): 540 to 860 mm support feet: includet Conveying speed (v m/s): 0,8 m/s Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0.075 / 0.37 / S1 Deflection roller (UR): Ø = 82 mm Drive drum (AT): Ø = 82 mm Slide travel: 370 mm Year of construction: 2001 Optionally available: controlling/Software Frequency Converters Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2001 condition: good (used) Conveying length in mm: 2640 Nominal / outside width in mm: 1300 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive KW: 0,37/S1 Ampere: 1,30 Conveyor speed m / s: 0,8 scope of delivery: Lichtschranken, inklus ...
Blume transfer roller conveyor slider 90° 1880-610-580 RA2045 Make: Running direction: both directions Roller width (RB): 580 mm Nominal/outer width frame (NB): 610 - 670 mm Length: 1880 mm Roller distance: 75-80 mm Ejector side: both sides Motor: drummotor Interroll 24V Lifter: pneumatic cylinder Currently set high: 875 mm Conveyor speed: freely adjustable with frequency converter between 0.275 and 0.667 m/s Optionally available: Light barrier scope of delivery: supports Features: condition: very good (used) Construction year: 2012 nominal voltage: 24V angle: 4x 90° Conveying length in mm: 1880 Nominal / outside width in mm: 610, 680 Roll width in mm: 580 Roll division in mm: 75-80 Driven: YES Engine type: Interroll Trommelmotor Conveyor speed m / s: 0,275 - 0,667 scope of delivery: including supports without side guides For individual, expert advice, simply get in touch with us. ...
USED TETRA PAK TBA 19 250ML SLIM COMPLETE FILLING LINE FOR SALE Item #: Usm-188 Category Tetra Pak TBA 19 1-TBA 19 250ml Slim Filling Machine, Year of manufactitng 1999, Version 10v, Speed 7500 PPH 2-Tetra Pak Straw Applicator TSA 46, Year of manufacturing 1997 3-Tetra Pak Cardboard Packer TCBP 70 4-Tetra Easy Ride 5-Conveyors and Paper trolly Condition: Still on production and Tetra pak maintained.
USED TETRA PAK TBA 19 200ML SLIM COMPLETE FILLING LINE FOR SALE Item #: Usm-189 Category Tetra Pak TBA 19 Used Tetra Pak TBA 19 200ml Slim Filling Machine, Version 10v, Year of manufacturing 1998, Speed 7500 PPH Tetra Pak Straw Applicator, TSA 21 Tetra Pak Packer, TCBP 70 Conveyors and Paper Trolly Condition: Good
Sell a GUK folding machine Cartonac 2000-2 on behalf of a customer More information on request.
three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 240 mm -Short taper holder: Short taper 6 Ø 105 -Passage: Ø 77 mm -one set: hard interchangeable jaws -Weight: 28 kg
Wedge bar chuck, power chuck, three-jaw chuck, three-jaw lathe chuck -Hole size: Ø 216 mm -Recess recording: mm -Bolt circle: mm -Through hole: 50 mm -Soft interchangeable jaws -Dimensions: Ø 216/H75 mm -Weight: 18.7 kg
Offer 23380 Specifications: - Drilling capacity in steel ST 60 30 mm - Drilling spindle holder MK 3 - 4 feeds 0.1 - 0.16 - 0.25 - 0.4 mm/rev - Drilling spindle speeds in gear stages 95 - 2000 rpm - Drilling spindle stroke 160 mm - Projection 350 mm - Table with 3 T-slots height adjustable 340 x 320 mm - Table can be tilted left + right -Max. Distance table – drilling spindle 500 mm - Max distance machined base plate – drilling spindle 1050 mm - Column diameter 160 mm -Lighting - Drive 400 V / 2.4 kW - Space requirement approx. W 600 x H 1950 x D 800 mm - Weight approx. 350 kg
Inv. Num. : 7253 Type: MSF 9001.25Lr T500 Producer: Microstep Created: 2015, GO 2022 Parameters: Laser power: 10 kW Work table length: 9000 mm Work table width: 2500 mm Maximum sheet thickness when cutting (stainless steel): 25 mm Source: nLight CORONA-CFX-10000 Positioning speed: 130 m/min Laser head: Thermacut EX-TRABEAM-Pro-360 Machine height: 2570 mm Machine length: 23000 mm Machine width: 6000 mm Equipment: Technical Documentation Point Laser Sight Camera in the head Protective glass against lens contamination Remote support Adaptive Cutting Automatic alignment of sheet rotation LED Control Panel Automatic nozzle cleaning Calibration station Pallet Table Changer 2 Tables Intake segments under the grate 1x socket Automatic chip conveyor Automatic suction 2x Asper Licenses
GE LM 2500 gas turbines 2 pcs available Power:24.000 Hp each Average working hours 1700 hours
B&R X20 CP 3586 IF 2772 DI 9371 DO 9322 RA2038 Manufacturer: B&R Industrial Automation Components: 1x X20 CP 3586 3x X20 IF 2772 2x X20 DI 9371 1x X20 DO 9322 Intel ATOM 1.6 GHz with additional I/O processor Ethernet, POWERLINK with Poll Response Chaining and USB on board 3 slots for modular interface expansion CompactFlash as exchangeable program memory 512 MByte DDR2 SDRAM main memory Controller redundancy possible Fanless Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features:
Several used old-type tanks from the 80s, capacity approximately 10.000-20.000 liters
Used Tecan Freedome evo 200 pipetting robot with TE-MO 3/5 Pictures will follow
Pneumatic cylinder, air cylinder, pneumatic piston, air piston, standard cylinder -Manufacturer: Camozzi, pneumatic cylinder type 61M2PO40A0250 -Stroke travel: 250 mm -Piston: Ø 40 mm -Piston rod: Ø 16 mm -Dimensions: 515/60/H60 mm -Total weight: 2.5 kg
Metal bellows coupling, claw coupling, connecting coupling, torsionally elastic coupling -Claw coupling: Torsionally flexible claw coupling -Bore: Ø 29 mm -Number: 3x coupling available -Price: per piece -Dimensions: Ø 225 x 180 mm -Weight: 26.4 kg/pc.
CNC Manufacturing Center Mill 2000 Commissioning 2007 4 - 5 axis machine Siemens 840 D Commuting X axis 2000 mm y axis 500 mm Z axis 550 mm 40 tool slots Rigid table with chip tray Clamping surface 2600 mm 550 mm with 3 T-slots High-speed package Rapid traverses 60 m/min Speed 20 - 12,000 rpm Coolant pump 30 bar 900 liters 2 extraction units as air purifiers Automatic grease lubrication 2x Rinsing gun Single-shift operation Spindle has been renewed and much more. The machine can be viewed under power
2500 KVA Transformer Year 2009
1 CALATOR inspection machine for open width knitted fabrics type BSM 2500, roller width 270 cm, working width 250 cm, entry small roll, exit small roll, with LABELTEX 86 type LBTX defect registration unit, with illuminated table
Used Buchi vacuum evaporator model Rotavapor R-210. Year of construction 2014. Water bath: 20-95 degrees C Flask capacity: 50-4000 ml Equipped with: vacuum controller, vacuum pump, cooler, thermostat.
Metal bellows coupling, claw coupling, connecting coupling, torsionally flexible coupling -Claw coupling: torsionally flexible claw coupling -Holes: Ø 22 mm / Ø 29 mm -Quantity: 1 piece available -Price: per piece -Dimensions: Ø 258 x 200 mm -Weight: 37.4 kg/piece
Bag Clipper P+S Mako BFS30C-C/2005 -Bag clipper, bread bag, noodle bag, etc -Manufacturer: P+S Mako Verpackungsmaschinen GmbH Pfizenmaier & Söhne -Type: BFS 30C-C -Stainless steel machine -Operating voltage: 3V 400 50Hz -Year of construction 2005
Used line for packing product into cups by FDPm type PAK 2LTF. New 2015. Power supply 3 x 400 V Power 6.5 kW Pressure 6-8 bar Weight 3400 kg Technical specifications: 1. the control of the machine is supervised from the control panel Mitsubishi controller. The machine operates in an automatic cycle. The controller has the following operating programmes: - automatic operation mode with control of the product level in the tank - presence of packages - cyclic operation mode - one cycle - dose regulation The control system switches off the dispensers in the following cases: - lack of pressure - opening of covers - lack of packaging The control system is also equipped with: - visual and acoustic signalling of the operating state 2. Control cabinet - IP 65, located inside the unit, equipped with ventilation and a heat sink. In addition, the electrical cabinet an ...
Reimelt Fat Baking Plant/Berlin Plant/Doughnut Plant Type EL 8/2500 Year of construction 2008 Electric heating Manual cloth feeding 8 rows, for products up to 105mm incl. 6 trolleys with sheets and various cloths incl. downstream vaccination station with 4 jam pressure containers incl. steam hood incl. grease level regulator incl. oil tank with heater - Level regulation via weighing incl. extraction hood Bakery condition/immediately available from stock
Roller bearings, ball bearings, spherical bearings, bearings, rolling bearings, spherical bearings, spherical roller bearings, cylindrical roller bearings -Spherical roller bearings: Roller bearings with lubrication groove -Type: 22322 -Bore: Ø 110 mm -Outer diameter: 240 mm -Width: 80 mm -Weight: 17 kg
Tip distance approx. 400 mm Tip height above bed 130 mm 12 speeds from 125 – 2800 rpm Space requirements, length x width 1.2 x 0.6 m Weight estimated approx. 400 kg
Cross support, cross support, cross table, cross sliding table, cover plate -Manufacturer: Kunzmann, 2 pcs. Cover plates from milling machine type UFV 600 -Price/Sale: complete -Dimensions each: 263/161/H38 mm -Weight: 9.7 kg
Tip distance approx. 500 mm Tip height above bed 125 mm 16 speeds from 120 – 1800 rpm Space requirements, length x width 1.2 x 0.6 m Weight estimated approx. 450 kg
Spine cutter HORIZON BQ 270 / 440 / 460 Art.: PS2821 Ersatzteil Nr. / parts No. 63643 (9822849) (M011440-03) Quality : Tungsten carbide Made in Germany Dimensions: 178 x 76.1 x 5/4 mm. Number of teeth: 40 (there is a variant for 52 teeth)
Tip distance approx. 500 mm Tip height above bed 125 mm 8 speeds from 220 – 1800 rpm Space requirements, length x width 1.2 x 0.6 m Weight estimated approx. 400 kg
Max. Book Size: 320x320, Min. Book Size: 135x105, Book Thickness 1 to 50, Max Production Speed 500 Cycles/Hour (About 300 Books)
Grids, grids, light grids, inlay grids, inlay grids, stairs -available: 1 piece -Dimensions: 1260 x 230 mm -Total height: 60 mm - Struts wall thickness: 2 mm - Bridge height: 30/10 mm -Grating: hot-dip galvanized -Weight: 9 kg
Specifications: Capacity 63 tons Stroke rate 140 h/min Projection 250 mm Plunger stroke 8-100 mm Table , WxD approx. 700 x 480 mm Installation height approx. 400 mm
Module converter, electronic module -Wire type: DSV 5421-10/220 -Module: 220 V/4 KVA/10 A -with: controller BELIMO SGS -Dimensions: 275/275/H225 mm -Weight: 9.7 kg
amount: 1 STK height: 450 mm external diameter: 340 mm Filter cartridge/3-5µm 340 x 450 mm - H 34 2240/40 KIT MANN FILTER Oil filter element Mann filter element for oil of the highest quality for wire erosion, die sinking and spark erosion drilling. The Mann + Hummel H 34 2240/40 KIT oil filter element reliably removes dirt and solid particles such as dust, metal abrasion, oil, carbon, soot, etc. It offers protection and is used for the filtration of engine, hydraulic and gear oil. Technical data Height: 450 mm Outer diameter: 340 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Kolbus CASERMAKER DA 232 Year: 2004 Serial Nr.: 236 Transport feed Hopper feed of pre-cut boards Hot melt glue Copilot system with touchscreen Auto splice and waste cutter Automatic lubrication Max size 405 x cover 560, 110 x 155 mm • Max cover thickness 4 mm
Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder -Stroke: 150 mm -Piston diameter: 50 mm -Piston rod: 18 mm -Price: per piece -Number: 10 pieces -Dimensions: 330/65/H65 mm -Weight: 2.15 kg/piece
Transnorm modular conveyor with combiner conveyor belt GF 2500-1300-1200 RA2230 Merging of two belts into one Technical data: Conveyor length (NL): 2500 mm Frame width (NB): 1300 mm, 1600 mm with motor Belt width (GuB): 1200 mm Overall height (BH): 80 mm, 430 mm with motor at the bottom, approx. 1000 mm with motor at the top Scraper height: 190 mm (without motor) Belt width/height scraper: 180 mm Support feet: optionally available Conveyor speed (v m/s): 1 Drive: SEW geared motor, R17 DT80N4 Electrical data: 50Hz V380-500, kW 0.75 S1 Drive pulley: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Lateral guide on one and both sides Frequency inverter for stepless speed change Adjustable length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2001 condition: good (used) Conveying length ...
Used ribbon mixer by Riela. Capacity 2000 L. Engine power 11 kW.
Round cylinders, pneumatic cylinders, standard cylinders, air cylinders, pneumatic punches, air punches, compact cylinders, short-stroke cylinders -Stroke: 200 mm -Piston diameter: 80 mm -Piston rod: 25 mm -Dimensions: 420/95/H95 mm -Weight: 5.3 kg
Round cylinders, pneumatic cylinders, standard cylinders, air cylinders, pneumatic punches, air punches, compact cylinders, short-stroke cylinders -Stroke: 200 mm -Piston diameter: 20 mm -Piston rod: 8 mm -Dimension: Ø 27 x 333 mm -Weight: 0.3 kg
Round cylinders, pneumatic cylinders, standard cylinders, air cylinders, pneumatic punches, air punches, compact cylinders, short-stroke cylinders -Stroke: 250 mm -Piston diameter: 25 mm -Piston rod: 10 mm -Dimension: Ø 30 x 393 mm -Weight: 0.5 kg
Pneumatic cylinders, air cylinders, pneumatic rams, air rams, standard cylinders, short-stroke cylinders, compact cylinders -Stroke: 30 mm -Piston diameter: 32 mm -Piston rod: 12 mm -Price: per piece -Number: 3 pieces -Dimensions: 80/50/H50 mm -Weight: 0.35 kg/piece
Lindner Micromat MS 2000 Drive motor : 75 kW ,400 V/50 Hz Control cabinet: complete star/triangle Rotor speed: approx. 80 rpm at 50 Hz. Rotor blade: 104 pcs. New Rotor blade shape: 43x43x19.5 mm Infill opening: LxW 2030 x 1650 mm Rotor length: 2030 mm Rotor flight circle: 560 mm Wiper comb:yes Counter knife: yes Hydraulic power unit: complete Hydraulic cylinder sieve cassette:sieves 50x50 mm Total weight approx. 9.5 t Dimensions LxWxH mm: approx. 4520 x2970 x 2660 mm Viewing and trial run possible by appointment. incl. funnel Shipping time: immediately
Transnorm conveyor belt GF 2600-600-500 RA2237 Technical data: Make: Transnorm Conveyor length (NL): 2600 mm Frame width (NB): 600 mm, 700 mm with motor Belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Support feet: optionally available Conveyor speed (v m/s): please contact us Drive: SEW geared motor, R17 DT71D4/TH Electrical data: 50Hz V380-500, kW 0.37 S1 Drive pulley: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Lateral guide on one and both sides Frequency inverter for stepless speed change Adjustable length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2008 condition: good (used) Conveying length in mm: 2600 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,37/S1 Conv ...
turning diameter over bed: 250 mm turning diameter over slide rest: 140 mm turning length: 550 mm turning speeds: 50 - 2000 U/min centre height: 125 mm spindle bore: 26 mm tailstock quill taper MT: 2 MK tailstock quill stroke: 65 mm connected load frequency: 230 V total power requirement: 1,1 kW weight of the machine ca.: 0,15 t dimensions of the machine ca.: 1,3 x 0,6 x 0,65 m Benchtop lathe with base cabinet 3-axis LCD digital display system fully assembled. Longitudinal feed. 3-jaw chuck 125 mm. 4-jaw chuck 125 mm. Clamping plate. 4-way steel holder. Clock for thread cutting. Drip tray Hardened bed tracks. Emergency stop switch. Forage protection Set of wheels. Appropriate tools. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
maximum number of results exceeded
please refine your search
