pm 52 2 used for sale

Key data: 4 , 220 , 120

Guiliet Profilier and Hobelautmat with Wepla heads Model: 220 KXR 220 Year built:1990 Condition: very good (used) MAX CROSS-SECTION 220 X 120 MM MIN CROSS-SECTION 30 X 6 MM ENTRANCE TABLE 2000 MM long. PLANING SHAFTS 40 MM Dressing shaft 5.5 kW right and left planing shaft combined 5,5kW Thickness planer shaft 5.5 kW WEIGHT APPROX. 1600 KG Cleaned, maintained and functionally tested. If necessary, we can gladly offer planing heads with continuous cutting edges.

Specifications: • RKT refrigeration dryer for the treatment of compressed air • 10 bar operating pressure • 4 kW • 400 V • 570 l/min effective delivery rate • ECN pressure vessel 270 l powder-coated • Duplex filter set WBF 63 MFO/CA consisting of Microfilters and activated carbon filters incl. automatic float trap (for paint booth) • Oil-water separation system KON-C2 incl. inlet and outlet fittings • 2 fully automatic tank drainage valves KN 1.230 Year of Make: 2025 Price: We ask for your binding offer. Available from: immediately Terms of delivery: ex location – EXW Berlin Payment Terms: Payment before pickup Accessories without guarantee. The following applies: "Object bought as seen". The prospective buyer must satisfy himself on site of the completeness of the property.

Extraction dedusting Walther NOVA 2000 with 2 extraction arms mobile on wheels 2 pieces available Very good operational condition!

Stock number: 3754 HYDRAULIC PRESS Manufacturer: STENHOJ, Type: 25T TE Machine NO.: 54718, Year of construction: 1988 Specifications: Table size 620 x 380 mm Stroke length 300 mm pressing force 25 ton Weight: 1600 kg

split chiller, chiller - water-cooled, Type: OCEAN Tech OCTME 230 – 66 kW Manufacturer: MTA S.p.A. OCEAN Tech OCTME 230 are water-cooled chillers for indoor installation in split version (without condenser) without hydraulic circuit (pump, accumulator) incl. crank tray heating, phase monitoring. Cooling capacity kW 66.2 Cold water temp. Exit/Entry: 7 / 12°C Volume flow m³/h 11.4 Condensing temperature: 45°C Refrigerant R 410A Electrical data: Voltage V 400, Frequency Hz 50, Phase Ph 3 Max. power consumption (kW) 27 Max. current (A) 45 Starting Current Circuit (A) 178 Protection class: IP22 Dimensions: Length mm 1735, width mm 660, height mm 1200 Weight kg 383 Connection cold water G 2" B Refrigerant connection Ø mm: 22 / 28 ODF Serial No.: 2200388958 Year of construction 2022 Condition: Optical 1 , Technically ok (Stock unit, as good as new) Pri ...

split chiller, chiller - water-cooled, Type: OCEAN Tech OCTME 230 – 66 kW Manufacturer: MTA S.p.A. OCEAN Tech OCTME 230 are water-cooled chillers for indoor installation in split version (without condenser) without hydraulic circuit (pump, accumulator) incl. crank tray heating, phase monitoring. Cooling capacity kW 66.2 Cold water temp. Exit/Entry: 7 / 12°C Volume flow m³/h 11.4 Condensing temperature: 45°C Refrigerant R 410A Electrical data: Voltage V 400, Frequency Hz 50, Phase Ph 3 Max. power consumption (kW) 27 Max. current (A) 45 Starting Current Circuit (A) 178 Protection class: IP22 Dimensions: Length mm 1735, width mm 660, height mm 1200 Weight kg 383 Connection cold water G 2" B Refrigerant connection Ø mm: 22 / 28 ODF Serial No.: 2200388958 Year of construction 2022 Condition: Optical 1 , Technically ok (Stock unit, as good as new) Pri ...

1250 x 1250 with reposition 27 station with 3 index - Very good condition

Standard configuration ? Stable C-frame ? Coordinate guide with integrated linear magazine, 11 tool stations for tools and clamps ? Drives: Maintenance-free, digital three-phase servo motors ? Punching head: Hydraulic system with closed control loop, single tool adapter, 360? rotation of all tools ? Automatic repositioning device with programmable presser foot ? Vacuum slug removal ? Swarf bucket ? Brush tables ? Parts chute 200 x 200 mm and sorting of parts into 2 containers ? 2 parts containers ? Controller BOSCH Type 3, activity-oriented user interface, Online help, diagnostic functions, 3.5 disk drive, BNC/RJ45 connection, TFT color screen 10.4 ? Graphic programming ToPs 2000 ? Safety: CE marking, multi-beam light barriers, rapid hydraulic shutdown Additional equipment ? MultitShear ? MultiBend ? SoftPunch ? Table extension ? Start post

Tetra Pak A1 Wedge 200ml Filling Line For Sale Item #: Usm-171 Category Tetra Pak A1 Tetra Pak A1 1000 for Tetra Wedge 200ml Filling Line Nominal line capacity (per hour) 11300 packages/h Package type Tetra Wedge Aseptic Package volume 200 ml Opening/Closure Straw Tetra Pak Straw Applicator 30 0400 TWA 1 Cooling system: Cooling system Photocell unit: Photocell unit Dating unit: With dating unit InkJet Paper trolley: With paper trolley Remote connection: With Remote connection Manual. Oil Pump f. Refill. Cabinet Jumbo Reel Truck 080S 0403; Battery operated stacker with traddle outriggers and electrical powered turning Online PLMS Stabilizer 35kVA

We offer a used sorter P-FTO.294 of the manufacturer EQUINOX for sale. Brand: EQUINOX Type: Compact sorter for sliding trays Year of construction: 2015 Sorting machine type P-FTO.294 Features: 38 ejects, first induction zone with two induction positions, one ejection Sorting capacity: 4000 trays per hour Dimensions for sorted items: 70/450 x 40/340 x 3/250 mm-H from 0.1 to 2 kg Sorting speed: 0.55 m/s Sorting height: Conveyor belt 14.5 m 16.8 m Dimensions of the sorting compartment: 475 x 466 mm wide Machine location: 89-600 Chojnice/Poland Price on request If you are interested, please contact us: +48601553406 or biuroregalux.pl

manf. 2009 / CE Label optical & technical very good conditions! more details on request exw Germany

Vertical panel saw with pliers Cutting length 5200 mm Cutting height 2200 mm cutting depth 70 mm Saw blade diameter 300 mm Scoring unit incl. adjustable Automatic sliding erost

offer 22629 TIG welding machine - air-cooled equal-alternating current system, mobile - for welding all weldable metals - e.g. stainless steel, steel, aluminium, brass, etc. - Welding current TIG infinitely adjustable from 20 A to 270 A 35% ED - A 100% ED - Connection 400 V - with: - Digital welding current indicator - Frequency control of the arc - HF ignition - Pulse device - Hose package 5 m -Reducer - Ground cable - Carriage - Space requirement approx. W 550 x H 1150 / 1300 x D 950 mm - Weight approx. 180 kg

Gebrauchte Wachtel 2010. H: 213 cm T: 118 cm B: 116 cm Fühlen Sie sich frei, mich für weitere Informationen zu kontaktieren.

Lift-tilt device, lifting tipper Make Itec, type 2700, year of construction 2017 for accommodating 200- and 300-litre standard loading trolleys lifting capacity: 350 kg Tipping height: 2.231mm incl. 1 standard loading trolley 3x460V 50 Hz 0,75 kW - very good condition, hardly used - was used to feed a piston filling machine - Documentation/operating instructions available Visit in Korntal-Münchingen possible

Fiorini Storage Tank 8000 Liters VKB 2.0 - 1000L 4" Buffer tank 8000 liters 2x125FL 8 bar Make: IVRP - Fiorini Type VKG – 8,000 – V – 2x125FL – 8 bar Special model Painted on the outside, black on the inside 20mm insulation 2x flange connections DN 125 3 threaded connections 1/2" PN 8 bar Tmax: +60°C Dimensions: Diameter mm 1840, height mm 3465 Weight kg approx. 252.7 (empty) Connection: 2x DN125 Product no.: G0300062000035 Year of construction 2023/24 Condition: Optical 1-2, Technically ok Stock Equipment, as good as new Price: on request in Euro (plus VAT from Nettetal) – 3 months warranty (Technical changes and prior sale reserved!) Location: MTA Deutschland GmbH, 41334 Nettetal

Code: 0005 Brand: OMMA / OTHER BRANDS 2300 Model: 2300 Nr 2 rubber-coated rollers Technical data Length mm 2300 Diameter mm 230 Rifling 3,4 x 1 cm / 9 x 1" (inch) Overall dimensions of wooden crate for 2 rollers: mm 3000 x 900 x 550 h Weight kg 800

Mägerle rack and pinion grinding machine grinding machine MFP-L Siemens CNC Manufacturer [manufacturer]: Mägerle Type [ type]: MFP-L-260-75 Control unit: Siemens 840D Sinumerik Incl. handwheel Year of construction[construction year]: 10/2008 Travel path: Clamping surface table X= 2202mm Clamping surface table Z=352mm Longitudinal stroke 2600mm Cross stroke of the grinding support: 650mm Distance between table and grinding spindle axis 806mm Grinding wheel dimensions: Diameter 400mm Width 160mm Bore 127mm peripheral speed grinding wheel: 35(50) m/s Lifting speed: Longitudinal 30m/min Transverse 5m/min Vertical 5m/min smallest delivery amount 0,001mm Drive power: grinding wheel (AC) 75kW Total connection power: Machine 113kVA Knoll coolant filtering equipment dimensions ca: (L x D x H): 5.6m x 2.4m x 3m [weight]: 2.000kg Machine weight: 21.000kg Sp ...

Electric Forklift Manufacturer Still Type R60-20 Year of construction 2005 Duplex mast with full free lift Side shifters Tine adjustment Low operating hours Very good condition Very good battery from year of construction 2019! Hawker Special price

; Gross weight [kg]: 520; Engine: Yanmar 4TNV88-22G; Accessories: Tanker, Battery, Control Panel; Water Tank Volume [l]: 60

; Gross weight [kg]: 1931; Engine: Caterpillar C7.1; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Caterpillar DE200GC Generator Set specifically designed for stand-by duty.; Water Tank Volume [l]: 325

; Gross weight [kg]: 400; Registration Number: 1

turning diameter: 350 mm turning length: 532 mm control: Mazatrol Smart total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Mazatrol Smart CNC control 3-jaw chuck C-axis driven tools 12-fold revolver Tool Eye tail stock coolant device chip conveyor Technische Daten / technical details: max. Umlaufdurchmesser / max. swing diameter 660 mm max. Drehdurchmesser/ max. turning diameter 350 mm max. Drehlänge / max. turning length 532 mm Planweg (x) / cross way (x) 225 mm Längsweg (z) / longitudinal way (z) 560 mm Drehzahlbereich / spindle speed 5000 UpM /rpm Drehzahl angetriebene Werkzeuge / speed of driven tools 4500 UpM / rpm Werkzeugrevolver / turret head 12 fach /holes Eilgang X/Z / rapid feed X/Z 30/33 m/min Antriebsleistung Spindel / drive capacity spindle 15 kW Gewicht der Maschine ca. / weight 4500 kg Technische Daten, Zube ...

Sell Vacuum pump used Type: Busch 250-138, Vacuum: 20 mbar, Motor Oil: Type SAE30, Engine: Delfin, Year of manuf.: 2012, Power 3,45 kW, 230 volts, 15 A,

New and unused 2019 generator set with 0 running hours.; Gross weight [kg]: 13380; Engine: Perkins 4016-61TRG3; Accessories: Battery, Control Panel

New and unused 2023 generator set with 0 running hours.; Gross weight [kg]: 7753; Engine: Perkins 4008-30TAG3; Accessories: Battery, Control Panel, Including : coolant heater and battery charger

Rated current (A): 2500, Poles: 3; Gross weight [kg]: 61; Accessories: Multiple breakers in stock!, NEW/UNUSED

; Gross weight [kg]: 11000; Accessories: 40FT HC used Genset Container , ex FG Wilson P1650-E3, Inside dimensions: 8820x2200x2600 )LxWxH in mm)

Kneading machine Boku Type: AK 240 Year of construction: 1996 / 2004 Dough quantity: 240 kg additional 2 boilers Manual control 2 speed automatic Mechanical boiler locking Weight: 0.7 t per kneader Condition: from service, electrics and mechanics contra.

VEAGOO MACHINE VT-210X packaging machine was manufactured in 2020 in China. Characterised by its simple operation and reliability, the machine is designed for packing products i.e. disposable gloves or masks in bags made of various types of plastic. Highly efficient operation is achieved thanks to the used components and technology, saving time and materials. The VT-210X packaging line automatically determines the cutting length of the bags, then packs them with products with a maximum height of 85 mm, and at the end seals the pack very carefully. Depending on the size of the product being packed, the packaging machine is capable of producing up to a maximum of 150 bags per minute. The packaging machine is equipped with, among others, a PANASONIC PLC control and a YATAI temperature controller. The total weight of the machine is 650 kg. Technical specifications of the VEAGOO MACHINE ...

--> Tilting kneader with double jacket Material : wetted areas in stainless steel Volume : 260 ltr. Usable volume: 200 ltr. Dimensions: L 2.60 m x W 1.20 m x H 1.35 m.

Machine type electrode inverter welding rectifier Brand Alphaweld Type Alphaforce E-200 Supply voltage 1 x 230 volts Setting range 15 – 160 amperes Duty cycle 25 % ED at 200 amps 60% ED at 110 amps 100% ED at 100 amps Current adjustment infinitely variable weldable material thickness 5 mm Cooling inverter by built-in fan Portable assembly system version Fuse 16 Ampere Dimensions L x W x H 280 x 130 x 210 mm Weight 8 kg Age 24 months Condition workshop tested, like new, incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece electrode cable 1 piece ground cable 1 piece hand shield 1 piece of glass 90 x 110 mm white 1 piece protective glass 90 x 110 mm 10 DIN 1 pair of welding gloves with cuff 1 piece slag hammer heavy version 1 piece steel wire brush 2-row 25 rod electrodes  ...

; Gross weight [kg]: 6650; Accessories: 20FT Unused Genset Container

Manufacturer: Arburg Type: 270 C 300 - 100 Year of construction: 1999 Control: Selogica Closing type: Hydraulic Closing force: 300 kN Tie bar spacing: 270 mm x 270 mm Plate size: 446 mm x 446 mm Tool height: min 200 mm Opening distance: 350 mm Plate spacing max.: 550 mm Screw: 30 mm Stroke volume: 70 ccm / 59 gram PS Injection pressure: 1550 bar General Engine: 7,5 kW Heating: 4.7 kW Dimensions: 3.4 m x 1.4 m x 1.6 m Weight: 2000 kg Screen text: German

; Gross weight [kg]: 13500; Accessories: 40FT HC Unused Genset Container

Key data: 370 mm, 600 mm

Machine Type: CNC Lathe Manufacturer: Okuma Type: LU300-2ST Year of Make: 2005 Control: OSP-E100L Delivery time: in stock Machinery  Parts conveyor belt and parts collection tray – workpiece chute with removal conveyor belt incl. electrical kit  2 disc turret with VDI40 (12 + 8 stations)  Power clamping cylinder for hollow chips – Hole in the drawbar 52mm  Extension Kit "D" – Kit one touch IGF-D  Open/close chuck while the spindle is running via M-Code  Reinforced coolant pump 8 bar  Coolant on A and B turrets can be switched via M function  Interface for connecting rod feed  Chip conveyor Technical details  Swing diameter over bed: 530mm  Swing diameter over slide: 380mm  Distance between the tips: 600mm  Max. turning diameter: 370mm  Max. turning length: 600mm  Travel X-axis: upper 260mm  ...

Key data: 600 , 172 , 40

Manufacturer: Arburg Type: 370 C 600 - 250 Year of production: 2004 Control: Selogica Closing type: Hydraulic Closing force: 600 kN Tie bar spacing: 370 mm x 370 mm Plate size: 570 mm x 570 mm Tool height: min 250 mm Opening distance: 500 mm Max distance between plates: 750 mm Screw: 40 mm Stroke volume: 188 ccm / 172 gram PS Injection pressure: 1390 bar General Motor: 11 kW Heating: 5,5 kW Dimensions: 4,2 m x 1,5 m x 1,7 Weight: 3400 kg Screen text: German

; Gross weight [kg]: 785

; Gross weight [kg]: 2203; Engine: Caterpillar C7.1; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 418

Key data: 500 , 132 , 35

Manufacturer: Arburg Type: 320 C 500 - 250 Year of production: 2002 Control: Selogica Closing type: Hydraulic Closing force: 500 kN Tie bar spacing: 320 mm x 320 mm Plate size: 446 mm x 446 mm Tool height: min 200 mm Opening distance: 350 mm Max distance between plates: 550 mm Screw: 35 mm Stroke volume: 144 ccm / 132 gram PS Injection pressure: 1820 bar General Motor: 15 kW Heating: 6,5 kW Dimensions: 3,4 m x 1,4 m x 1,7 m Weight: 2830 kg Screen text: German Additional equipment Robot interface Core pull hydraulic: x1

; Gross weight [kg]: 2238; Engine: Caterpillar C7.1; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 418

The injector is a device for introducing brine solution through point injection of the raw product. Producer: Fomaco; Model: FGM 208 B; The machine has 208 needles (4mm diameter); The width of the tape is 740mm; The conveyor belt is not complete; Without brine filter; Length: 2300 mm; Width: 1200 mm; Height: 2300 mm; Weight: 1500 kg.

Description: FRIGGI Band Saw 2MF650 ACN Details: Type 2MF650 ACN Serial number 2511 Year of construction 1997

Caterpillar DE220GC Generator Set specifically designed for stand-by duty.; Gross weight [kg]: 1933; Engine: Caterpillar C7.1; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 325

; Power [PS]: 272; Gross weight [kg]: 2859; Engine: Caterpillar C9; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 500

Machine Details Stock number 1105-03807 Machine type CNC turning and milling center Brand Mori Seiki Type NL 2000 SY Year of construction 2005 Control type CNC Control MSX 850 Mapps 3 Storage location FRANCE Country of origin Japan Delivery time immediately Freight Base EX WORK Technical details turning diameter 356 mm Turning length 510 mm Control MSX 850 Mapps 3 Swing diameter 755 mm Standard turning diameter 275 Rod diameter 65 mm Travel - x 260 mm Travel - z 590 mm Spindle drive 15 kW Spindle speed 5000 1/min Turret stations / powered 12/12 Rapid traverse - longitudinal/flat 30 m/min Total power requirement 32 kW Machine weight ca. 5,8 t Space requirement approx. 2320 x 1783 x 1819 mm Accessories Conveyor High-pressure cooling 5 bar Workpiece counter Total counter Double foot switch Information High performance CNC lathe SUP SPINDLE + C AXIS + ...

offer 22651 Rotor blade inside belt grinding machine Specifications: - mobile version with motorized forward - reversing + steering -Mot. Grinding stroke forward – reverse with speed regulation - Grinding stroke longitudinally forward + backward -Mot. Contact pressure - grinding pressure regulation - Sanding belt dimensions approx. 2000 x 50 mm - Contact wheel W 60 / D 300 mm - Pneumatic connection 6 bar - Drive 400 V / 2880 rpm / 7 kW - Space requirement approx. W 5700 x H 1200 x D 1400 mm - Weight approx. 800 kg

Output conveyor for Horizon SPF 20A / FC-20

Brotschneidemaschine verwendet. Sehr guter Zustand.

The scope of delivery includes: 01x Shelf connector, used ( for lateral attachment to the shelf stands ) Total length: 391 mm Shelf spacing approx.: 289 mm L – Profile: 40 x 40 mm Dimensions center – center borehole: approx. 353 mm Weight: 0.39 kg | Pcs. Material color: sendz. galvanized