pm 52 2 used for sale

FRASCOLD SA 210 BY / MCL 80 Brand:FRASCOLD, DELTA TECHNICS Type:SA 210 BY / MCL 80 Stock number:M21-6073 Cooling capacity:5.8 kW Number of fans:1 + 4 Fin spacing:6,35 mm Refrigerant:HFC Voltage:400 / 230 Volts Dimensions:706 x700 x 512 / 2250 x 700 x 250 mm Weight:65 + 59 kg Year:2004 Number in stock:1 piece(s) Price: Quotation request Description: Complete Frascold system with 1 piston compressor. Equipped with a Delta Technics evaporator (MCL 80) and an Eliwell ID 974 controller. Mentioned capacity at an evaporating temperature of -5°C and an ambient temperature of +32°C. Visit also our website: used-refrigeration

Thermo-Combinator Crystallizer Schab Heat Exchanger / Cooler with scraped surface used Manufacturer: Schröder&Co Type: UTK 18/200-DH2A Stainless steel The system was used to heat, maintain temperature and cool ketchup. Hourly output approx. 1800 - 2000 kg 1 dosing pump with two pump heads for water/spice paste and tomato paste Capacity tomato paste 0-868 l/h Total dimensions approx. 3.5 x 1 x 1.5 m. Original price was approx. 270,000 DM The plant comes from a plant where canned food was produced. Changes and errors in the technical data and information excepted.

Manufacturer: Gottschild, Type: BSD 2000, Year: 2004, Control: Siemens, Monting of the machine: 5 Tellerbürsten, Number of units: 5, Working widht mm: 650, Through running hight max mm: 40, Diameter of brushes: ca.300, Cross-brushing unit: yes, Fast exchange device: yes, Through running hight max mm: 40, kW output motor: ca.1,5, Vacuum belt: yes, Feeding speed continous adjustable: yes, Year :2004

PKZZ 250 Double Column Crank stamping Press Completely overhauled. Electric and Control- Not available. Table 2500 x 1400 mm Ram 2320 x 1250 mm Distance between uprights 2525 mm Window in table width 2300 mm Window in table depth 850 mm Stroke 400 mm Strokes per minute SPM 12 Adjustment of ram 120 mm Shutheight 550 mm Table cushion force 50 to Cushion stroke 160 mm Motor 32 kW Weight ca. 39 tons

Manufacturer: Bauknecht, Type: 0W8/220, Serial number: 904417, Serial number: 738255, mH/Hz: 100, Power Input: 220 V, Imax= Ampere: 8 A,

Manufacturer: Bauknecht ATB, Type: 0V16/220, Model: 904431, Serial number: 738256, mH/Hz: 100 Hz, Output DC Volt: 3 x 220 V, Imax= Ampere: 16 A,

Manufacturer: WP-ARO, Type: 666120/240/C, Year: Membranenpumpe, Control: B1050623, Year :Membranenpumpe

Both filling stations are in good condition, little in use.

Recon Part Number: 1202 8212 + 1230 6887 Attention: We also have various other RECON parts of different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sale only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Manufacturer: Cefla, Type: TR 2500, Year: 1999, Working widht mm: 1350, Drive power kW: 0,26, Year :1999

Recon Part Number: 1231 3228 Diesel Attention: We also have various other RECON parts of different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sale only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Manufacturer: Cefla, Type: TN 2500, Year: 1999, Working widht mm: 1350, Drive power kW: 0,26, Year :1999

Manufacturer: Cefla, Type: TR 2500, Year: 1999, Length mm: 2500, Working widht mm: 1400, Drive power kW: 0,26, Year :1999

Manufacturer: Bürstenschleifmaschine, Type: 250 mm, Number of units: 2, Working widht mm: 250 , Diameter of brushes: 280, Units mounted upright: yes, Fast exchange device: yes, kW output motor: 1,5,

Web edge control for films Type: Ultrasonic Edge Sensor FX 5060 No. 226142 24V supply voltage, current consumption 170 ma Interface CAN - Profibus DI-B000-157905M Actuator AG 5791 / AG5891 Edge Sensor FX5060

Type: W/ARW 2200/12 Flying Splice Comm. 2011-001.1 Working width: 2200 mm Finished roll weight max. 2000 kg Finished roll diameter max. 2x 1200 mm Finished roll width min. 800 mm; max. 2200 mm Material Paper/ Foils 75 μm – 1000 μm Machine speed max. 1500 m/min Depending on the type of material and material thickness achievable Web tension: max. 1000 N Finished roll sleeves: inside 152.4 mm outside 162.4 mm - Type of cardboard sleeve, plastic - Sleeve tolerance according to DIN 6748 or 55470 Unwinding: Type ARW 2200/12 Unwinding: axisless 2 x 1200 mm; sleeve holder 6" L.W. (other dimensions with additional accessories possible) Sleeve holder: 6" L.W. (other dimensions with additional accessories possible) Pulleys: DM approx. 150 mm Brake: Generator brake with energy recirculation, control via ultrasonic sensor Path control: Edge control E&L with ultrasonic sens ...

Manufacturer: Hackemack, Type: KTR 2040, Year: 1995, Work piece width min-max mm: 1350, Min.-max. workpiece length in mm: 350, Min.-max. workpiece height in mm: 3 - 80, Number of lamps: 1, kW power 1 lamp: 15,6, kW power all lamps: 17.15, Lampen gerade eingebaut: yes, Lampen von unten: no, Year :1995

Manufacturer: Becker, Type: SV.5,250/1, revolutions rpm: 2800, Final sealing pressure mbar: 190/200, Drive power kW: ca.3,

The detected defects from a camera system are transferred via an interface to the fault marking system, where a label is then placed as a marker on the side of the film roll. Project number 2010 / A8392 Rated voltage 230 V; 50 Hz Rated power 1 kW Dispensing speed 1-600 mm/s (depending on label size) Positioning speed 25-30 mm/s Thermal Transfer Printer

Manufacturer: Rietschle, Type: G-BH1 2BH1900-7AH17, Engine power kW: 12,5, rotations rpm: 2950, Direkt drive: yes, Pressing: 280 mbar, Suction side mm: ca.100, Outlet side mm: ca. 100,

Manufacturer: SR, Type: TM 2000, Year: ca.2000, Lifting power kg: 1000, Length mm: 1500, Width mm: 540 Gabel aussen, Lifting hight approx. mm: ca.150, FREE TEXT: Preis 120 Euro.zzgl.Mwst, Year :ca.2000

Manufacturer: Hackemack, Type: KTR 2061, Year: 1997, Work piece width min-max mm: 1350, Min.-max. workpiece length in mm: 150, Number of lamps: 1, kW power 1 lamp: 10, kW power all lamps: 11,75, Lampen gerade eingebaut: 1, Power per lamp watt UV: 80, Conveyor lenght mm: ca 2000, Feeding speed m/min: 5 - 25, Drive power kW: ca. 1,5, Working height in mm: 980, Year :1997

Manufacturer: Cefla, Type: UV 2000, Year: 2020, Work piece width min-max mm: 1300, Number of lamps: 2+1, Lamps inclined installation: yes, Lamps from below: 1, Conveyor lenght mm: 6500, Working widht mm: 1300, Conveyor lenght mm: 6500, Working widht mm: 1300, Required space L x W x H mm: L-6500, Year :2020

Edge strip shredder for edge trimming plastic films.

Precision ball screw drive, KGT 50mm, Gewindelg 2670mm, Rexroth, new Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely mint condition and in its original packaging. - Precision ball screw /ball screw with nut - Thread nominal diameter 50mm, pitch 10mm, 4 turns, that means 40mm travel per turn of the nut, - Total length: 2930mm, - ball screw length: 2670mm Shaft end 1: 165mm lg - D32 x 35mm lg, thread M35 x 1,5 x 25mm lg, D35 x 85mm lg, D42 x 20mm lg Shaft end 2: 95mm lg - thread M25 x 1,5 x 28mm lg, D35 x 53mm lg, D42 x 14mm lg Function guarantee! For second hand parts, we can not provide a conventional warranty and guarantee. However, we give you a functional guarante ...

Type: S 200 l 2P Complete stainless steel Hopper capacity 200 liter Double working shafts with paddles Rotation of shafts in both directions Protection cover Two motors and two gears, transmission chain Electric power: 1.5 kW + 1.5 kW Voltage: 380 V / 50 Hz Discharging: 2 flaps Installation dimensions of machine in cm: Width: 120 Lenght: 65 Height: 100 Delivery time: after advanced payment, one working day

Graef Euro 2250 Knife diameter 220 mm Cutting height 155 mm Cutting length 220 mm Cutting thickness 3-15 mm Tabletop unit Footprint 460 x 320 mm Stock: 50 pieces

Manufacturer: Höcker Polytechnik, Type: S 200, Year: 1985, Volumenstrom m3/h: 2850, Fan kW: 3 kW, Year :1985

Manufacturer: Hackemack, Type: KTR 2061, Year: 1999, Min.-max. workpiece height in mm: 3 - 80, Working widht max mm: 1300, Working width min min mm: 1, Lampen Schräg eingebaut: no, Lampen gerade eingebaut: 1, Lampen von unten: no, Power per lamp watt UV: 80, Conveyor lenght mm: ca. 2000, Year :1999

Manufacturer: Perske Umrichter, Year: 1996, Type: 2004 neugewickelt, Year :1996

The CE08 series is an electrically driven high-pressure cleaner. This model is the ideal tool for general cleaning work. Built into a stainless steel frame, this robust high-pressure cleaner is easy to move and can be equipped with various accessories, such as rotor nozzles, chemical injectors and a sandblasting kit. Similar but no Dynajet, Falch, Kärcher, Oertzen, etc. Available models: ----- CE08-200 50Hz 200 bar 16 l/min. CE08-200 60Hz 200 bar 16 l/min. General Specifications: ----- Power of the drive motor: 6.0 kW Volts: 400V (50Hz) - 440V (60Hz) Amp: 12.8A (50Hz) - 12.3A (60Hz) Dimensions: 690 mm x 560 mm x 900 mm Weight: 70 kg Includes standard accessories.

-Boiler Hebekiper Diosna HKV 224 -with Boku stage -suitable for boilers with metal pipes on the sides -Tilt height approx. 120cm -Height 245cm -Footprint approx. 170x107cm -Year of construction 2015

screw ø:: 90 mm screw length:: 20D screw speedl:: 0 - 60 U/min Condition: NEW, Specification: Rubber vacuum extruder - with warranty - Screw diameter: 90 mm - Screw length: L = 20 D (approx. 1,800 mm conveying length) - Screw speed: 0 - 60 rpm - Centre height of extruder: approx. 1,125 mm incl. base frame - Max. permissible injection pressure: 500 bar - with feed roller - Extruder water-tempered - Extruder base frame as welded construction, to accommodate the extruder with drive motor, the temperature control, the vacuum pump - Funnel piece with intermediate flange: two tempering zones approx. 4D = 480 mm - Vacuum cylinder: three tempering zones BL = 1,057 mm - End cylinder: one temperature control zone approx. 4D = 360 mm - Number of tempering zones: 5 - Heating capaci ...

Manufacturer: Böllhoff Membranenpumpe, Type: 001-200-DP, Year: 2009, FREITEXT1: Födervolumen 125 L/min, FREITEXT2: 8 Bar, FREITEXT3: Temperatur max 80 Grad, FREITEXT4: Übersetzungsverhältnis 1:1, FREITEXT5: geprüft ausgeliefert, Year :2009

Manufacturer: Telemecanique, Type: TSX DMF 242 A,

Manufacturer: Indramat Achscontroller, Type: KDV1-3-100/220/300 W1/220, Seriennummer: 758606-060 385 991, Gebraucht: yes,

Manufacturer: Indramat, Type: Indramat KDW 1.1-100-300-W1-220, Seriennummer: Mod 9/11008-140, war verbaut inMaschine: IMA,

For sale: Diosna spiral kneader W 240 - 3 boilers - Program memory - Speed control with an inverter - with the possibility to change the speed of the spiral/tool - boiler with tilting possibility - perfect condition Contact: damianborucki@anbox.pl or +48 692 345 660 (also WhatsApp)

Wittmann Battenfeld Injection Moulding Machine Here we offer you a SmartPower 210/1330 Thermoset machine. Wittmann Battenfeld injection moulding machine with UNILOG B8 control system Plant was serviced by the manufacturer WITTMANN BATTENFELD Deutschland GmbH in January 2021 / checked and brought up to date As part of the complete review, various updates were installed and the hydraulic oil (600 liters) was refilled. In addition to the already normally existing pressure switches, the system consists of the possibility to install additional internal mold pressure switches 2 pieces Kistler module for mold internal pressure switching range 1: 20,000 pC, range 2: 10,000 pC). The parts for the upgrade mold internal pressure switches are part of the scope of delivery. Injection molding machine: Series: SmartPower Machine type: 210/1330 Control type: UNILOG B8 Machine number: ...

Kemper vat wagon with boiler Kneading boiler vats for spiral kneader Kemper SP 250 AL Stainless steel boilers with carrying handle for a maximum of 250 kg flour for max. 400 kg dough Dimensions Boiler diameter inside 125 cm Boiler height 60 cm

For sale: Konig spiral kneader GYD 240 system as in Diosna - 3 boilers - after general overhaul - perfect condition Contact: damianborucki@anbox.pl or +48 692 345 660 (also WhatsApp)

Key data: 198 KW, 248 kVA, 400 V

MODEL: EQ-C248198 ENGINE: Cummins 6CTAA8.9-G2 FREQUENCY (HZ): 50 VOLTAGE (V): 400 POWER: 248(kVA) / 198(kW) STARTING: ELECTRIC CONTROL SYSTEM: SELF-CONTROL FUEL TYPE: DIESEL COOLING: WATER-COOLED WEIGHT: 1900kg DIMENSIONS L/W/HEIGHT (MM): 330011502000 The engines are new, complete including control, diesel tank, exhaust and batteries. Network monitoring, grid feed-in Soundproofed Immediately ready for use. Control: Deep Sea Electronics (DSE) / ComAp Alternator: Leroy-Somer / Stamford Additional: Automatic Transfer Switch (ATS) 63A/100A ABB & Schneider Disconnectors GenCloud Connect with a phone or computer Single-phase valve 50°C-55°C Radiator External Diesel Tank Lubricating Oil Heater Water Heating Dispatch: Worldwide transport including unloading is possible for an extra charge To be able to quote an exact freight price, please send us an inquiry with your  ...

Key data: 198 KW, 248 kVA, 400 V

MODEL: EQ-C248198 ENGINE: Cummins 6CTAA8.9-G2 FREQUENCY (HZ): 50 VOLTAGE (V): 400 POWER: 248(kVA) / 198(kW) STARTING: ELECTRIC CONTROL SYSTEM: SELF-CONTROL FUEL TYPE: DIESEL COOLING: WATER-COOLED WEIGHT: 1900kg DIMENSIONS L/W/HEIGHT (MM): 330011502000 The engines are new, complete including control, diesel tank, exhaust and batteries. Network monitoring, grid feed-in Soundproofed Immediately ready for use. Control: Deep Sea Electronics (DSE) / ComAp Alternator: Leroy-Somer / Stamford Additional: Automatic Transfer Switch (ATS) 63A/100A ABB & Schneider Disconnectors GenCloud Connect with a phone or computer Single-phase valve 50°C-55°C Radiator External Diesel Tank Lubricating Oil Heater Water Heating Dispatch: Worldwide transport including unloading is possible for an extra charge To be able to quote an exact freight price, please send us an inquiry with your  ...

Pausch recording workstation Compact CS 2000 with the following device components: Generator Editor Hfe 501 Tube RAD 21 0.6/1.2 Varian Vertical tripod BS 2000 • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally railed and with Stretch film wrapped and can be picked up immediately • You buy the system in "ACTUAL" condition from the warehouse Freiberg (EXW), Saxony, Germany, and advance payment. • The sale takes place as "used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full Functionality without guarantee. • The installation and configuration of the system or plant components must be completed by a specialist authorised by the manufacturer or technicians!

1 used service water pump HABERMANN HPK, power 600 cbm/h, impeller diameter 660, H 33, good condition, E -Motor SONDERMEIER GmbH Type KG315 S/7, 110 kW

GEA type 200023512 Intercooler Ladeluftkühler MTU Einwandfreier Zustand perfect condition from an MTU4000 engine that has been running for 25,000 hours von einem MTU4000-Motor, der seit 25000h in Betrieb ist

Key data: 280 KW, 359 kVA, 400 V

MODEL: EQ-C350280 ENGINE: Cummins NTA855-G3 FREQUENCY (HZ): 50 VOLTAGE (V): 400/230 POWER: 350 kVA / 280 kW STARTING: ELECTRIC CONTROL SYSTEM: SELF-CONTROL FUEL TYPE: DIESEL COOLING: WATER-COOLED WEIGHT: 2700kg DIMENSIONS L/W/HEIGHT (MM): 310010501700 The engines are new, complete including control, diesel tank, exhaust and batteries. Network monitoring, grid feed-in Soundproofed Immediately ready for use. Control: Deep Sea Electronics (DSE) / ComAp Alternator: Leroy-Somer / Stamford Additional: Automatic Transfer Switch (ATS) 63A/100A ABB & Schneider Disconnectors GenCloud Connect with a phone or computer Single-phase valve 50°C-55°C Radiator External Diesel Tank Lubricating Oil Heater Water Heating Dispatch: Worldwide transport including unloading is possible for an extra charge To be able to quote an exact freight price, please send us an inquiry with your  ...

Key data: 176 KW, 220 kVA, 400 V

MODEL: EQ-P220176 ENGINE: Perkins 1106A-70TAG4 FREQUENCY (HZ): 50 VOLTAGE(V): 400V/230V POWER: 220(kVA) / 176(kW) CONTROL SYSTEM: SELF-CONTROL FUEL TYPE: DIESEL COOLING: WATER-COOLED WEIGHT: 2136kg DIMENSIONS L/W/HEIGHT (MM): 330011001800 The engines are new, complete including control, diesel tank, exhaust and batteries. Network monitoring, grid feed-in Soundproofed Immediately ready for use. Control: Deep Sea Electronics (DSE) / ComAp Alternator: Leroy-Somer / Stamford Additional: Automatic Transfer Switch (ATS) 63A/100A ABB & Schneider Disconnectors GenCloud Connect with a phone or computer Single-phase valve 50°C-55°C Radiator External Diesel Tank Lubricating Oil Heater Water Heating Dispatch: Worldwide transport including unloading is possible for an extra charge To be able to quote an exact freight price, please send us an inquiry with your details and fu ...

clamping force: 500 kN injection volume: -- cm³ screw diameter: 25 mm platen size: 400 x 400 mm Condition: used, Specification: horizontal injection molding machine, - used injection unit: - Screw diameter: 25 mm - shot volume max.: -- cm³ - injection pressure approx.: 1290 bar - heating zones: 4 - Heating power: 4 kW clamping unit: - clamping force: 500 kN - opening stroke max.: 325 mm - platen distance max.: 550 mm - clamping platen size approx.: 400 x 400 mm - tie bar distance: 270 x 270 mm - pump motor: 15 kW - total power: 19 kW - operating voltage: 380V, 50Hz - Weight approx.: 1.870 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Diosna Lifting Tipper for Kemper SP 125 A Boiler Type: HK 224 Load capacity max. 600kg for SP 125 A spiral kneader boiler Can be driven on castors with locking device robust steel construction Overhauled at the end of 2010 Entry direction of the vats from the side Large tilt angle Tipping height of the boiler 210cm Tipping height: 210cm Height: 300cm