pm 52 2 used for sale

150 Litre kettle. Gas energy / Propan-butan

Press capacity: 160 ton Ram stroke adjustable: 20 - 130 mm Slide adjustment: 100 mm Daylight: 560 mm Table surface area : 1500 x 800 mm Slide area: 1400 x 800 mm Number of strokes: 20 - 60 s.p.m. Distance between the columns F - B: 520 mm Height over floor approx.: 3550 mm Required power: 48 kW Weight of machine approx.: 26 ton

Lifting capacity: 100 Kg Magnetic field: 70 x 60 mm weight: 5 Kg dimensions: 100 x 120 x 120 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Stock Number: 3785 ECCENTRIC PRESS Manufacturer: PMB, Type: EPFT 100 Machine NO.: 004301, Year of manufacture: 2002 Specifications: Table size 780 x 590 mm Stroke length 8-120 mm Number of strokes per minute 55 Projection 300 mm Operating height 395 mm Total power 7.5 kW Pneumatic clutch. Gear ratio. Hydr. Overuse protection. Weight: 5500 kg

Prefamac PMOU80 Moulding machine 2011, stainless moulding machine, 80Kg capacity, adjustable temp control, with vibrating table, 1Ph

Prefamac PMOU80 Moulding machine 2011, stainless moulding machine, 80Kg capacity, adjustable temp control, with vibrating table, 1Ph

Lifting capacity: 2000 Kg Magnetic field: mm weight: 80 Kg dimensions: 0,5 x 0,25 x 0,3 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Prefamac PMOU80 Moulding machine 2020, stainless moulding machine, 80Kg capacity, adjustable temp control, with vibrating table, 1Ph

Air table 2 side tables Photo cells Program Electrical retrofit in TVC (2005)

Manufacturer: Promicon, Type: PMC.09-E9, Serial number: 910014, Year: 1989, Output DC Volt: 220V 50Hz, Year :1989

• Vacuum mixing and kneading system with 2 planetary mixing shafts and 1 wall/floor scraper. • Particularly suitable for the preparation of highly viscous pastes and sealing compounds, consisting of a high-speed (speed 200-2,500 rpm) and a low-speed agitator (speed 20-200 rpm) • Speed planetary disc 7-84 rpm • Mixing tools 2x cross beam and 2x butterfly, possible combinations cross beam on both sides, cross beam and butterfly, butterfly on both sides • High-speed mixing shaft with reversal of direction of rotation • 2 containers each with a total capacity of approx. 18 l, usable capacity 5-15.0 l (depending on product) • Container diam. 270 mm, depth 316 mm, total height 335 mm • Heating/cooling jacket, max. operating temperature 90°C, without heating/cooling device, designed for factory water • Hydraulic container lifting/lowering device • Press-out device, ...

Rated power at 50% DC: 100 kVA Projection: 1100 mm Electrode force adjustable: 100 - 600 daN Electrode arm adjustment: 300 mm required air pressure: 6 bar Welding capacity max.: 162 kVA Weight: 670 kg Space requirements: 2000 x 700 x 1850 mm

Cylinder head face milling and grinding machine in good condition. Grinding segment wheel diameter 420 mm Table clamping surface 1600x360 mm Table travel 1800 mm Distance between machine table and machine head 825 mm Extensive range of optional accessories Wet machining has never been carried out with the machine

• For sorting and erecting of bottles, consisting of: - Feeding bunker with elevated conveyor, type BBR 350 B, filling volume 350 l, filling weight max. 75 kg, belt width 400 mm, bar distance 300 mm, belt length 2,00 m - Bowl feeder, type RF52 L, diam. 800 mm - Vibrating conveyor, type LFL 650 - Outfeed conveyor, type PMA 30, belt width 30 mm, belt length 2,10 m, for lining up e.g. at a filling machine • With change parts for bottle 5 ml (diam. 20,7/20,9/21 mm) and 10 ml (diam. 23 mm) • Electr. connection 230V/50Hz

Manipulator, lifting aid, lifting device, workplace crane, hall slewing crane, hall crane, workplace crane, material grab, column slewing crane -Manufacturer: dalmec, manipulator pneumatic Posivel type PVC -Load capacity: 80 kg -Throat: max. 3040 mm -Total height: 3015 mm -Hook height: 1800 mm -Stroke: 3300mm -Swivel range: 270° -Dimensions: see photo technical. drawing -Transport dimensions: 3050/700/H500 mm -Town weight: 192 kg

Control, control part, interface -Manufacturer: Jungheinrich, control from electric truck ECE 20 -Type: PM 2402 L -Mat no.: 50020525 -Voltage: 24V -Number: 2x control unit available -Price per piece -Dimensions: 170/135/H70 mm -Weight: 0.8 kg/pc.

Control, control part, interface -Manufacturer: Jungheinrich, control from electric truck ERC 205 / ECE 20 / ESE 320 -Type: 2x PM2402L/2 / 2x PM 2402 L -Mat no.: 50306778 -Voltage: 24V -Number: 3x control unit available -Price per piece -Dimensions: 170/135/H70 mm -Weight: 0.8 kg/pc.

Flow meter, vibration measurement, display device, vibration measurement, monitor display -Manufacturer: HBM, industrial measuring amplifier -Type: PME MP60 -Price: per piece -Number: 2 piece -Dimensions: 160/60/H145 mm -Weight: 0.9 kg

Temperature controller, temperature sensor, setting for temperature, signal converter, temperature converter, temperature monitor, thermostat, transmitter -Manufacturer: PMA, temperature control -Type: CI 45 -Output: 500 VA, 250 VAC, 2A -Dimensions: 125/22/H110 mm -Weight: 0.2 kg

Angle flange, flange, cable entry, cable protection -Nominal width: 48 mm -Protection type: IP 66 -universal: applicable -Packaging unit: 10 pieces -Price: per packaging unit -46x bags: 10 pieces each -Dimensions: -Weight: 1 kg/piece

Container rotating device, welding rotating device, welding rotating device, welding device, welding rotating table, welding rotating and tilting table, welding rotating device, welding rotating tilting table -Manufacturer: Commercy Soudure, welding rotating device swiveling -Type: PM 250 -Load capacity: see photo of nameplate -Control: with foot pedal -Three-jaw chuck: Ø 314 mm, bore Ø 100 mm, base plate Ø 600 mm -Speed: max. 3 rpm right/left running -tiltable: via crank -Transport dimensions: 1190/720/H900 mm -Total weight: 267 kg

Specifications: Maximum turning length 90 mm Circulation diameter over bed 220 mm Circulation diameter over support 110 mm Center width 160 mm Bore 23 mm 3 speeds 350 / 700 / 1400 rpm

Center height 110 mm Center width 160 mm Spindle bore 23 mm Motor power 1.7 kW . Speeds : 700 - 1400 - 2800 rpm .

Used Wrap Around Packer Prasmatic Wrap around Prasmatic year 2002 from 20 packs per minute in 3 2 format [...for more information send your inquiry to the seller.] refno: W08

Specifications: Center height 110 mm Center width 160 mm Spindle bore 23 mm Motor power 1.7 kW in each case rotational speed via potentiometer To be set from approx. 100 – 2,300 rpm 3 preset speeds or 3 switching stages

2 Farben Offsetdruckmaschine - 2 Color Sheet-Fed Offset Press Heidelberg PM 52-2+ Baujahr / Year 2008 - Serial-No. RS001504 Format / Size max. 360 x 520mm  Druckzahl / Impressions 63 Mio. Feuchtwerk mit Kuehlung / Dampening System Alcolor - Baldwin Refrigeration Plus Version EasyPlate Plate exchange Farbwalzenwascheinrichtung / Ink roller wash-up device Gummituchwascheinrichtung / Blanket wash-up device Speed 13.000 Sheet Per Hour Ink laser ducts Auslagetrommel SuperBlue Powder Spray Grafix Alphatronic 200 Inklusive Handbuecher / Manuals Included  Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test

Kreuzleger - Stacker CMC ROBOT 300 PMC Year 1994 -Online-Video-Inspection by Skype-Video- -We would be very pleased with your visit - more machines on Stock- -Available Immediately - Can be inspect- -On Stock Emskirchen / Nuernberg - Can be test-

Profile milling machine Bäuerle - Cross section milling machine Type: PM 510 Machine No. 126/91 Year of construction: 1991 Table size 1250 x 410 mm Tool span 510 mm Tool flight circle diameter max. 250 mm Milling height max. 250 mm Milling depth 65 mm Milling spindle diameter 40 mm Table height 870 mm Motor power 18.5 kW, 380 V, 50 Hz, 35 Amp. Working cycles per minute max. 6 Operating pressure max. 6 bar Air consumption 140 l/min. Feed speed 0 – 4.5 m/min. Revolutions per minute at flight circle diameter 180 mm 6000 rpm Revolutions per minute at flight circle diameter 200 mm 4800 rpm Suction nozzle diameter 160 mm with 16 mini tine milling cutters 15 mm cutter width on 500 mm total width with instruction manual Weight: 780 kg Machine dimensions L 1250 mm x W 1270 mm x H 1600 mm

length: mm height: mm output: 16 kw control: TYP AT 1 : 2 voltage: 380 V connected load: 43 kW total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

HYDRAULIC PRESS with hot platens model MANNI PMC 90/36 second hand machine for wood, veneer, composite materials, furniture, panels etc platen useful size mm.3000 x 1300 n.06 cylinders diam.mm.70 max. thrust Ton.90 opening mm.430 hydraulic pump motor power Hp 2 hot water plates heating via wood boiler weight kgs. 3800 volt. 380/50

General SKU379T1136 LocationBarneveld MakeDrais TypePML-V+H No.54 310 Year of construction1992 Pressure Working pressure3 Bar Main Features MaterialStainless steel Volume1.2 Ltr. Motor3.3 KW Specified Features - Sand mill MaterialCeramic, Stainless steel 1.4571 (316Ti) Capacity1,2 Ltr. Inlet9,5 Outlet9,5 With jacketcheck Motor3,3 kW Rotor speed2900 rpm With pumpStober RD11G-1005-012-4 Motor0,12 kW 220/380 (Ex) With variable speed drivecheck Information With switchcheck With switchgearcheck Weight340 kg Floorspace1,2x0,9 m Total height0,7 m ATEX compatiblecheck Extra Specificationsthe machine comes with many additional partsSand millsDraisMills > Sand millsBrand > Drais What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the  ...

General SKU294T684 LocationBarneveld MakeDraiswerke TypePMH-25-TEX No.53860 Year of construction1990 Pressure Working pressure1 Bar Working pressure jacket3 Bar Main Features MaterialStainless steel Volume31 Ltr. Motor22 KW Specified Features - Sand mill MaterialStainless steel Attritorcheck Capacity25 Ltr. Housing dimensions dia. 235x700 mm InletDN25 OutletDN25 With mechanical sealcheck With jacket10 Ltr. Max. temperature98 °C Motor22 kW 400/690 Volt Without ballscheck Information Total height1,8 m Weight1400 kg Floorspace1,7x1 mSand millsDraisMills > Sand millsBrand > Drais What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU212T522 LocationBarneveld MakeSulzer Burckhardt TypeAPOVAC PMH 156 D3X3 Mach.No.52449 Pressure Working pressure0.04 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume110000 Ltr. Motor4.6 KW Specified Features - Vacuum pump MaterialStainless steel 1.4435 (316L) Pumpcheck Number of pumps:1 Capacity20 - 110 m³/h With motor4,6 kW 220-380 Volt (Ex) InletDN40 OutletDN40 Information Year of construction1991 Total height1,8 m Floorspace1x0,86 m Weight280 kg Extra SpecificationsUseful volume of ring liquid tank: 40 ltr. Surface area of ring liquid cooler: 1.5 m² Surface of exhaust gas condenser: 0.8 m² Vacuum pumpsSulzer BurckhardtPumps > Vacuum pumpsBrand > Sulzer Burckhardt What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You a ...

General SKU035E113 LocationBarneveld MakeDraiswerke GmbH Mannheim TypePMC-25 TEX No.55036 / 5078 Year of construction1994 Pressure Working pressure3 Bar Main Features MaterialRubber Lined Volume25 Ltr. Motor30 KW Specified Features - Sand mill Horizontal sand mill(1x) Capacity33,7 Ltr Housing dimensions dia. 230x700mm, Housing without jacket With mechanical sealcheck With jacketcheck Max. temperature70°C Motor30,0 kW, 400/690 Volt With variable speed drive(frequency inverter) With pumpmake Bredel, type SPX-25 Motor0,55 KW, 230/400 Volt MaterialRubber, Stainless steel 1.4571 (316Ti) Information With switchgearcheck Floorspace2,3x1,1 M Total height1,9 M Weight1550 KG Extra SpecificationsHousing is rubber lined Technical specs Extra informationHousing without jacketSand millsDraisMills > Sand millsBrand > Drais What you can expect from Foeth: -- Machine is  ...

General SKU041H133 LocationBarneveld MakeTK Fielder Ltd Eastleigh, Hampshire TypePMA-800/2G Pharma Matrix Year of construction1985 Pressure Working pressure jacket2 Bar Main Features MaterialStainless steel Volume800 Ltr. Motor37 KW Specified Features - Universal mixer MaterialStainless steel 1.4401 (316) Universal mixer(1x) Capacity800 Ltr Vessel sizesdia. 1300x600mm With covercheck Pneumatic operated outletdia. 200mm With jacketcheck With motor37,0 KW, 380/660 Volt With lump breakercheck With motor11,0 KW, 380/660 Volt Rotor speed2915 Rpm Information Mach.No.2486 Floorspace3,0x1,6 M Total height2,5 MUniversal mixersTK FielderMixers > Universal mixersBrand > TK Fielder What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the mac ...

General SKUR1312 LocationBarneveld MakeDrais Werke GmbH (D) TypePMH 50 TEX No.53353 Year of construction1989 Main Features MaterialStainless steel Volume50 Ltr. Motor36 KW Specified Features - Sand mill Horizontal sand millcheck Capacity50 ltr. Housing dimensions dia. 290x855mm Inletdia. 30mm Outletdia. 30mm With mechanical sealcheck With jacketcheck Max. temperature100 degr. C Motor36 kW 380/660 Volt (Ex) MaterialStainless steel Information Total height1,8 M Weight2000 Kg Floorspace2,0x1,0 M ATEX compatiblecheck Extra Specificationswith extra screen cartridges 0.22 and 0.35 mm including spare part grinding inner wall and grinding discs Sand millsDraisMills > Sand millsBrand > Drais What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to in ...

General SKU235T263 LocationBarneveld MakeDrais Perl Mill TypePM 25 TEX No.54 786 Pressure Working pressure3 Bar Main Features MaterialMild steel/Stainless steel Volume30.2 Ltr. Motor25.9 KW Specified Features - Sand mill MaterialMild steel, Stainless steel 1.4571 (316Ti) Attritorcheck Horizontal sand millcheck CapacityBruto: 30,2 Ltr, Netto: 24,6 Ltr. Housing dimensions dia. 235x700 mm InletDN 32 OutletDN 32 With mechanical sealcheck With jacketcheck Motor25.9 kW 460/790 Volt With variable speed drivecheck Rotor speed37 - 204 rpm Information With switchas is Floorspace1,65x0,9 m Total height1,8 m Weight1350 kgSand millsDraisMills > Sand millsBrand > Drais What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barne ...

General SKUR1313 LocationBarneveld MakeDrais Werke (D) TypePMH-50 TEX No.52357 Year of construction1986 Main Features MaterialStainless steel Volume50 Ltr. Motor36 KW Specified Features - Sand mill MaterialStainless steel 1.4571 (316Ti) Horizontal sand millcheck Capacity50 Ltr. Housing dimensions dia. 290x855 mm Inletdia. 30 mm Outletdia. 30 mm With sievecheck With mechanical sealcheck With jacketcheck Max. temperature100 °C Motor36 kW 380 Volt (Ex) Rotor speed1000 rpm Information Total height1,8 M Weight2000 Kg Floorspace2,0x1,0 M ATEX compatiblecheck Extra Specificationswith extra screen cartridges 0.22 and 0.35mm including spare part grinding inner wall and grinding discs Sand millsDraisMills > Sand millsBrand > Drais What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any dest ...

General SKUR1137 LocationBarneveld MakeDrais Draiswerke GmbH (D) TypePMV 50 RL No.52775 Year of construction1986 Main Features Volume50 Ltr. Motor36 KW Specified Features - Sand mill Vertical sandmillcheck Capacity50 Ltr Housing dimensions dia. 295x730mm Inletdia. 25mm Outletdia. 25mm Motor36 kW 220/380 Volt With pumpcheck Motor1,36 kW 220/380 Volt Information With switchcheck Weight2850 Floorspace1,7x1,2 M Total height2,7 M Extra Specificationsincluding replacement housing, discs and spacers Sand millsDraisMills > Sand millsBrand > Drais What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU092A453 LocationBarneveld MakeDrais TypePMV-25 RL (RL=Lochscheiben-Rührwerk) No.53418 Year of construction1989 Material Disc materialMild steel Pressure Working pressure1 Bar Working pressure jacket3 Bar Main Features MaterialMild steel Volume26 Ltr. Motor24 KW Specified Features - Sand mill Vertical sandmill(1x) Capacity26,0 Ltr Housing dimensions dia. 230x580mm With jacketcheck Motor24,0 KW, 380/660 Volt (Ex) CapacityMax. 750 Ltr/Hr With pumpcheck Motor0,75 KW, 220/380 Volt (Ex) With variable speed drivecheck MaterialMild steel Information With switchcheck Floorspace1,6x0,9 M Total height2,3 M Weight1400 KG ATEX compatiblecheckSand millsDraisMills > Sand millsBrand > Drais What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welc ...

max. workpiece length: 1.500 mm max. Workpiece weight: 180 kg max. swing diameter: 300 mm Wheel diameter: 650 / 700 mm max. wheel width: 50 / 60 mm cutting speed: 125 - 200 m/s control: SIEMENS 840 D Crankshaft Grinding Machine | NAXOS-UNION EMAG - PMD 320S The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: PMD320S | PMD-320S | PMD 320 S | PMD320 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Rotatable support table between 0° and 180° with latching points, thus 3-sided machining in one clamping Speed per minute: 12.0000 Pneumatically controllable copy pens Pneumatic material clamping Minimum Quantity Spraying Device Pneumatic lifting movement can be switched between slow and fast Weight: approx. 600 kg

x-travel: 1000 mm y-travel: 3000 mm z-travel: 2000 mm Overall size: 4,5 x 4 x 5,2 m machine weight ab.: 8,5 t 3D measuring machine, Leitz/Hexagon, type PMMF1600 / M00-211-300, Equipment/ Accessories: - div. probes - div. accessories - overhead design, - used as a coordinate measuring machine, - gear measuring center, - form tester, - roughness measuring device, - measuring range approx. 3,000 x 2,000 x 1,600 mm, - resolution 5 nm, - control panel, PC, Dell, Intel Core i5 processor, 2 20 monitors Dell, The PMM-F is specially designed for the inspection of medium-sized components and gears. This 3D measuring machine is designed in an overhead construction and serves as a coordinate measuring machine, gear measuring center, form tester and roughness measuring device. Area of application: Inspection of medium-sized components and gears Design: Overhead design Functions: Coordinate measuring ...

Machine: Automatic horizontal cartoner with reciprocating movements. Product: Blisters, strips, trays, rigid or flexible tubes, bottles, sachets, soaps and other products food or cosmetics. Usable material: cases with opposite or alternating legs in compact cardboard with a weight ranging from 220 to 400 g/m², pre-broken and pre-glued. Closing: By retracting legs or by hot glue distributed by commercially available nozzles., Cadence / min: 20 to 140 cycles/min , Elec: 400 V / 50 Hz / 8.6 A , A + B (mm): max 140 , A (mm): min 15 / max 90, B (mm): min 12 / max 70 , C (mm): min 50 / max 200

Planetary mixer Rego PM100 E - Planetary mixer Rego - Type: PM100 E - Power: 11 kW - Volts: 220 / 380 - Amp: 25

General SKU222W220 LocationBarneveld MakeNiro-Fielder Main Features MaterialStainless steel Volume25 Ltr. Motor5.5 KW Specified Features - Universal mixer Gral-granulatorcheck Capacity25 Ltr. Vessel sizesdia. 400x200 mm With covercheck Inletdia. 32 mm (2x) Pneumatic operated outletcheck Outlet150x150 mm With jacketcheck With motorcheck 4/5,5 kW 380 Volt Rotor speed243/486 rpm. With lump breakercheck With motor1,3/1,8 kW Rotor speed1500/3000 rpm. Information Mach.No.90,765 With switchgearcheck Floorspace1,3x1,0 m Total height1,6 m Weight740 kgUniversal mixersNiro FielderMixers > Universal mixersBrand > Niro Fielder What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Ba ...

VOLLMER PMH gang saw splitter Saw width: 70-360 mm Saw Blade Thickness 0.7-3.5mm Tooth pitch 20 to 100 mm Tooth height from 8 mm

Stock number: 3855 ECCENTRIC PRESS Manufacturer: PMB, Type: EPF 64 Machine NO.: 744103, Year of manufacture: 1974 Specifications: Gr. pressing pressure 64 to Table size 520 x 700 mm Stroke length 8-96 mm Projection 265 mm Total power 5.5 kW Control Fabr. Pneumatic clutch. Length: 2000 mm, Height: 2500 mm, Width: 1200 mm, Weight: 4000 kg

Height=1.55 m, Overall length= 1.1 m, Overall width= 1.3 m, Net weight= 1000 kg,

Joint milling Kappsaegen Buendingfraesen Ecik rounding Radus Ziehklinegen Straight scraper blades Schwabelln Feed rate 9 m/min