129,676 used machines on RESALE, but how to find them? Machine Search
Measuring amplifier, for flow meter, vibration measurement, display device, vibration measurement, monitor display -Manufacturer: HBM, industrial measuring amplifier -Type: PME MP60 -Number: 2 measuring amplifiers available -Price: per piece -Dimensions: 160/60/H145 mm -Weight: 0.9 kg
Planetary mixer Rego PM100 E - Planetary mixer Rego - Type: PM100 E - Power: 11 kW - Volts: 220 / 380 - Amp: 25
Stock number: 3855 ECCENTRIC PRESS Manufacturer: PMB, Type: EPF 64 Machine NO.: 744103, Year of manufacture: 1974 Specifications: Gr. pressing pressure 64 to Table size 520 x 700 mm Stroke length 8-96 mm Projection 265 mm Total power 5.5 kW Control Fabr. Pneumatic clutch. Length: 2000 mm, Height: 2500 mm, Width: 1200 mm, Weight: 4000 kg
Key data: 30 mm, 28 , 110 U/min
Used Filament Line Single Screw Extruder 30mm 28L/D 2 meter water bath Trigger AB50 Winder W250 Machines from PMH GmbH
MITROPOWER Diesel Generator PM13TA1-3 Rated power 11 kVA Max. power 12 kVA Mains voltage 400/230 V Rated current 15.8 A / 27.6 A Fuel tank capacity 25 L Water-cooled Noise level 72 dB (A) Weight approx. 331 kg LxWxH 1240x700x950 mm
Kreuzleger - Stacker CMC ROBOT 300 PMC Year 1994 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
Angle flange, flange, cable entry, cable protection -Nominal width: 48 mm -Protection type: IP 66 -universal: applicable -Packaging unit: 10 pieces -Price: per packaging unit -46x bags: 10 pieces each -Dimensions: -Weight: 1 kg/piece
Pressure transducer -Type: PMP131-A3101A1X -U: 12...30 VDC -Weight 0.5 kg
Control, control part, interface -Manufacturer: Jungheinrich, control from electric truck ECE 20 -Type: PM 2402 L -Mat no.: 50020525 -Voltage: 24V -Number: 2x control unit available -Price per piece -Dimensions: 170/135/H70 mm -Weight: 0.8 kg/pc.
2008 HEINRICH SCHNEIDER PMS 400 Measuring machine Type: PMS 400 Year of construction: 11/2008 Magnification: 1.5x Voltage: 240V AC Frequency: 50/60 Hz Power: 1 kW Technical data: see pictures Find more here - / Contact us at -
Forklift battery charger, industrial charger, Forklift battery charger, industrial charger, Si rectifier -Charger for forklifts: Miditron Type D 400G 48/100 PWF-PMT -Input voltage: 400 V 50 Hz -Power: 48 V/100 A -Dimensions: 555/530/H690 mm -Weight: 112 kg
turning diameter over bed: . mm turning diameter over slide rest: 100 mm turning length: . mm swing diameter: 200 mm The technical data is manufacturer or operator information and is therefore not binding for us. We reserve the right to sell the goods prior to sale, our terms and conditions of business and sale apply exclusively. About us more than 400 of our own machines in stock over 12,000 m² of storage space, crane capacity 70 t more than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. You can find further offers on our website. Viewings are possible by arrangement. We look forward to your visit. Your Markus Hirsch team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 80 kVA, 350 mm, 600 kp
Rated power at 50%ED: 80kVA Short-circuit current: 45.4kA Electrode force: 100-600daN / single stroke Projection: 350mm --- Welding control: MPS 100mono (8 times, 1 program) --- Incl. additional options: - Pre-mounted electrode holder -Foot switch - Adjustment device - Electronic flow monitor - Main switch + transformer tap changer 4-way --- Warranty 6 months --- Training + commissioning on request --- Spot welding electrodes + spare parts available from stock
Flame cutting system, torch, oxy-fuel cutting system, machine cutting torch -Manufacturer: ESAB, machine cutting torch -Type: PMY -3 connections: gas/oxygen/cutting oxygen -Dimensions: 490/140/100 mm -Weight: 2.5 kg
Press capacity: 160 ton Ram stroke adjustable: 20 - 130 mm Slide adjustment: 100 mm Daylight: 560 mm Table surface area : 1500 x 800 mm Slide area: 1400 x 800 mm Number of strokes: 20 - 60 s.p.m. Distance between the columns F - B: 520 mm Height over floor approx.: 3550 mm Required power: 48 kW Weight of machine approx.: 26 ton
current capacity: 112 + Nebenleitung 63 kVA throat: . mm contact pressure capacity: . kp total power requirement: . kW weight of the machine ca.: 0,475 t dimensions of the machine ca.: . m The technical data is manufacturer or operator information and is therefore not binding for us. We reserve the right to sell the goods prior to sale, our terms and conditions of business and sale apply exclusively. About us more than 400 of our own machines in stock over 12,000 m² of storage space, crane capacity 70 t more than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. You can find further offers on our website. Viewings are possible by arrangement. We look forward to your visit. Your Markus Hirsch team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Manufacturer: Promicon, Type: PMC.09-E9, Serial number: 910014, Year: 1989, Output DC Volt: 220V 50Hz, Year :1989
CNC Milling machine PMER type S120 Travel X: 1200 mm Travel Y: 630 mm Travel Z: 600 mm Numerical Command ANILAM 5300 (Defective ANILAM screen changed by a PC screen + PC keyboard) Cone: BT 40 Spindle speed: from 50 to 6000 RPM Table size: 1600 x 500 mm Year of construction: 2002 Maxi distance spindle nose/table: 730 mm Mini distance spindle nose/table: 130 mm Diameter of the spindle sheath : Ø 150 mm Pneumatic tool clamp Central lubrication Lubricant pump Voltage: 380 V Width: 2300 mm Depth: 3600 mm Total height: 2600 mm Weight: approx 4,5 T
Gearbox, spur gear -Translation: 1:2,9 -Drive shaft: Ø 19 mm -Drive shaft: Ø 19 mm hollow shaft -Dimensions: 260/240/H180 mm -Weight: 12 kg
Description Inverter Power module Siemens Sinamics G120 PM240-2 6SL3210-1PE24-5AL0 for disassembly
Description Geiger Handling control unit Selecontrol PMC10/02 board
We offer for sale a complete set of Indutec industrial shredder model PM16/3, equipped with all its original components and accessories, ideal for intensive industrial use in the sectors of recycling, material shredding or industrial processing. ✅ General Features: Model: Indutec PM16/3 Type: Heavy Industrial Shredder, High Power Condition: Excellent condition, complete, with accessories and spare parts Total weight: Approximately 47,500 kg divided into two containers + base Composition of the set (ready to operate): First container – N° 128790 – 13,000 kg Engine: WEG 315 S/M – 150 kW – Gearbox: FLENDER B3 SV 11A – 118 kW – Pump: Neuman & Esser CCS 6-M – 0.25 kW – Neuman & Esser clocks: 1.1, 1.2, 1.3, 1.4 Separator Gasket Lubrication tank Mill flange Spare parts set: blade holder, bevel gear, pendulum shaft, body and heads, bolts Second containe ...
CNC Milling machine PMER type DPM Travel X: 780 mm Travel Y: 410 mm Travel Z: 550 mm Numerical Command ANILAM type 5000 M Cone: ISO 40 Spindle exit: 120 mm (manual) Spindle speed: from 70 to 3800 RPM Table size: 1270 x 320 mm Year of construction: 2004 Maxi distance spindle nose/table: 500 mm Mini distance spindle nose/table: 100 mm Swivel head right/left Jog crank Possibility to work manually (with cranks) or driven by the CN Lubricant pump Voltage: 380 V Width: 1900 mm Depth: 2100 mm Total height: 2500 mm Weight: 2,5 T
Rego PM20 Planetary Mixer 20 liter Bakery Confectionery - Stepless electronic speed control / speed control - Electric boiler height adjustment - With automatic switch-off / timer - Light for illuminating the boiler Accessories: - 1 kettle (20 liters) - 1 kneading arms - 1 flat beater - 1 whisk - All tools made of stainless steel
A Maka CNC 4-axis milling and drilling machine for plastic, wood and aluminum is available. Travel X/Y/Z: 2000mm/6000mm/250mm, C-axis: 360°, rapid traverse X/Y/Z: 45m/min/45m/min/24m/min, spindle mount: HSK63, spindle power: 12kW, spindle speed: 24000rpm. Tool places: 12, angle head places: 3, machine dimensions X/Y/Z: 12000mm/5700mm/3200mm, control: BWO 920, documentation available. On-site inspection is possible.
Lifting capacity: 100 Kg Magnetic field: 70 x 60 mm weight: 5 Kg dimensions: 100 x 120 x 120 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Lifting capacity: 1000 Kg Magnetic field: 258 x 176 mm weight: 0,031 t dimensions: 0,26 x 0,18 x 0,16 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
thread dia.: M3 - M16 metrisch : 250 U/min. 0: 6 - 8 bar working area: max. 1100 mm weight: 15 kg dimensions: 700 x 280 x 250 mm Pneumatic tapping machine Type with an adjustable angle, horizontal tapping possible Pneumatic tapping machines for M3 - M16 threads, angle adjustable. 8 pcs. quick-change chuck with slipping clutch. Documentation in English! Optional: clamping table with grooves type: FL-WB The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Lifting capacity: 600 Kg Magnetic field: 228 x 122 mm weight: 0,022 t dimensions: 0,23 x 0,122 x 0,112 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Lifting capacity: 1500 Kg Magnetic field: mm weight: 0,045 t dimensions: 0,44 x 0,22 x 0,25 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
thread dia.: M3 - M12 metrisch : 400 U/min. 0: 6 - 8 bar working area: max. 1100 mm weight: 15 kg dimensions: 700 x 280 x 200 mm Pneumatic tapping machine Type with an adjustable angle, horizontal tapping possible Pneumatic tapping machines for M3 - M12 threads, angle adjustable. 8 pcs. quick-change chuck with slipping clutch. Documentation in English! Optional: clamping table with grooves type: FL-WB The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Lifting capacity: 300 Kg Magnetic field: 228 x 122 mm weight: 16 Kg dimensions: 0,23 x 0,122 x 0,112 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
High Speed Mixer Manufacturer: GEA Aeromatic Fielder Type PMA 65 Year of manufacture 2004 Serial number 00208.1310 Very good condition High-speed GMP grade mixer granules 316 stainless steel with mirror polished finish for all product contact surfaces. The capacity of the mixing tank is about 65 liters, the minimum product content is 25 kg, depending on the product density. Rotor speed 1 45-450 rpm Speed rotor 2 1500-3000 rpm Choppers The mixing tank lid has a filter housing and an inflatable seal that is automatically activated. The machine has a rinsing system for the bowl and the seals. The mixing bowl has an external stainless steel heater / cooling jacket with 2 bar/80c max, 7 liters/min.
Lifting capacity: 2000 Kg Magnetic field: mm weight: 80 Kg dimensions: 0,5 x 0,25 x 0,3 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
A Pemat pan mixer for concrete is available. Volume: 750l, max. filling weight: 1200kg, hardened concrete output per batch: 500l, grain size range: 0-65mm, mixing trough diameter: 1900mm, mixing trough height: 700mm, drive power: 30kW, weight: approx. 3000kg. On-site inspection is possible.
current capacity: - kVA throat: - mm contact pressure capacity: - kp Rated power ( 50% ED ) : 50 kVA Continuous power : 35.4 kVA Maximum short circuit power : 163 kVA High welding power : 130 kVA Arm distance min. / max. : 60 / 230 mm Electrode arm Ø : 45 mm Electrode holder Ø : 25 mm Outreach : 610 mm Machine weight: approx. 285 kg Dimensions : 1200 x 700 x 1450 mm incl. foot switch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
width of the strips: 50 mm band length: x mm band speed: x m/min speeds: 1800-3600 U/min total power requirement: 5.5 kW weight of the machine ca.: 0.6 t 1x Belt 1x Polishing www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Rated power: 63 kVA Projection: 520 mm Electrode arm spacing: 200 mm Welding capacity steel: approx. 7 + 7 mm Welding performance of non-ferrous metals: approx. 2 + 2 mm electr. Connection: 380 V kW
Hydraulic motor PMH MCF55 Nobmjv D Hwrey Ex Ipecu Displacement cc/rev 55 Max output speed rpm 4,300 Max pressure bar: 500 The max output torque: Nm 350 Weight: 25 kg Manufacturer: PMP Industries Part Number: MCL.5502.1 Serial Number: PP0377490 Customer Code / Model: PMH MCF55 Country of Manufacture: Italy 1 piece in stock
Manufacturer: DRAIS Model: PM25 Type of Machine: bead mill - Vertical design - Sealed design with stuffing box packing - Grinding media separation via friction gap (adjustable on request) - Grinding container made of thick-walled special steel, coolable - Stirring discs made of Vaudit, hardened - Main drive power: 24 kW - Pump motor: 0.75 kW - Protection class: EEX e II T3 (explosion-proof electrical equipment) Find more here - / Contact us at -
CMS automatic package cross cutting system, Type PMI 120 / EL+L+REG, Manufacture year 2014, - Max. pack size 5000 x 1200 x 1200 mm, - Saw motor 9.2 kW, - Touch screen cnc controller, - Waste conveyor
Spot Projection Welding Machine NIMAK Type PMP 5 / 35Spot Welding Machine, Projection Welding MachineFabr. No. 88100 Year of construction approx. 1988Power at 50% ED 35 kVAArcharge 250 - 450 mmWorking stroke 40 mmElectrode force 100 - 460 kp infinitely adjustableElectrode force at 6 bar 460 daNBobedience air pressure 2 to 6 barElectrode arm 60 mmElectrode holder 30 mmInsert electrodes cone MK 2 17.78 mmArm spacing 200 / 400 mmAdjustability of the electrode holder 200 mmConnected load 83
A medium-frequency spot welding machine Dalex-Werke is available. Throat depth: 350mm, electrode stroke: 90mm, electrode holder diameter: 30mm, electrode taper: MK2, rated power at 20% duty cycle: 180kVA, max. welding power: 200kVA, primary voltage: 400V, rated frequency: 1000Hz, electrode force: 20daN–600daN. Weight: approx. 575kg, control: HWS 2102. Documentation available. An on-site inspection is possible.
saw blade diameter: 560/660/710 mm cutting diameter: 170/220 mm cutting range: 1000 x 220 mm cutting speed: 7- 48 m/min clamping devices hydraulic pneumatic: 20- 315 mm dimensions: 2,9 x 2,2x 1,95 m total power requirement: kW weight of the machine ca.: 2,8 t Used plate saw - part fixures - new security componens - external control panel The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
A Dalex welding press/projection welding machine including Sortimat (ATS) feeding unit is available. Rated power at 50% duty cycle: 100kVA, max. welding power: 455kVA, open-circuit voltage: 8.88V, max. short-circuit current: 67kA, cooling water flow rate: 10l/min, electrode force min./max.: 120daN/720daN, single-stroke cylinder: 100mm, machine throat depth: 250mm, stop range: 148mm-400mm, belt diameter: 260mm. Weight: approx. 850kg, control system: MPS 200 multi R1. Including sorting and feeding unit, flow monitor, adjustment device and return stroke monitoring. Documentation available. An on-site inspection is possible.
General SKU379T1136 LocationBarneveld MakeDrais TypePML-V+H No.54 310 Year of construction1992 Pressure Working pressure3 Bar Main Features MaterialStainless steel Volume1.2 Ltr. Motor3.3 KW Specified Features - Sand mill MaterialCeramic, Stainless steel 1.4571 (316Ti) Capacity1,2 Ltr. Inlet9,5 Outlet9,5 With jacketcheck Motor3,3 kW Rotor speed2900 rpm With pumpStober RD11G-1005-012-4 Motor0,12 kW 220/380 (Ex) With variable speed drivecheck Information With switchcheck With switchgearcheck Weight340 kg Floorspace1,2x0,9 m Total height0,7 m ATEX compatiblecheck Extra Specificationsthe machine comes with many additional partsSand millsDraisMills > Sand millsBrand > Drais What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the ...
General SKU294T684 LocationBarneveld MakeDraiswerke TypePMH-25-TEX No.53860 Year of construction1990 Pressure Working pressure1 Bar Working pressure jacket3 Bar Main Features MaterialStainless steel Volume31 Ltr. Motor22 KW Specified Features - Sand mill MaterialStainless steel Attritorcheck Capacity25 Ltr. Housing dimensions dia. 235x700 mm InletDN25 OutletDN25 With mechanical sealcheck With jacket10 Ltr. Max. temperature98 °C Motor22 kW 400/690 Volt Without ballscheck Information Total height1,8 m Weight1400 kg Floorspace1,7x1 mSand millsDraisMills > Sand millsBrand > Drais What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
Demonstration machine Standard equipment: Solid machine frame Long feed table Optimal price/performance ratio Noise protection hood Digital display of width and height adjustmentTechnical data: Planing width (finished size) min./max. 18 - 180 mm planing height (finished size) min./max. 7 -120 mm Min. workpiece length (single workpiece) 430 mm With group feed 250 mm Number of work spindles 4 Tool diameter of the 1st spindle 120 mm Tool diameter
maximum number of results exceeded
please refine your search
