pm 52 2 used for sale

Screws, washers, stainless steel screws, VA screws, wood screws, hanger bolts, solar fasteners -Solar fasteners: 1375 fully assembled threaded rods -Type: M10 x 250 SW 7 -Material: Stainless steel A2 -Price/Sale: complete -Transport dimensions: 1200/800/H300 mm -Weight: 235 kg

Electric motor, three-phase motor, pulley motor -Manufacturer: Himmelwerk, electric motor with pulley on both sides -Type 2 L12/5.5 2LS80 -Power: 1.1 kW -Speed: 2780 rpm -Pulleys: Ø 120/155 mm -Design: B3 -Protection class: IP 44 -Dimensions: 325/185/H155 mm -Weight: 10.2 kg

Electric motor, three-phase motor -Manufacturer: AEG, electric motor type AM 200 LZ2 -Power: 37 kW -Speed: 2925 rpm -Shaft: Ø 55 x 110 mm -Design: B3 -Dimensions: 735/480/H410mm -Weight: 288 kg

welding rectifier, electrode welding device, electrode welding machine, electrode welding rectifier -Manufacturer: ESAB, welding rectifier type LHE 260 -Welding power: max. 260 A -Welding cable with electrode clamp -ground cable -Dimensions: 710/480/H865 mm -Weight: 119 kg

steel ruler -Manufacturer: Hoffmann, precision steel ruler, stainless steel, length 2000 mm -Art.No.: 461400 2000 -Dimension 2040/30/1 mm -Weight: 0.5 kg

three-phase motor, electric motor -Manufacturer: VEM, electric motor type KPER 225 M2 -Power: 45 kW -Speed: 2940 rpm -Shaft: Ø 55 x 110 mm -Protection class: IP54 -Design: B3 -Dimensions: 770/420/H510 mm -Weight: 286 kg.

Dematic conveyor accumulating roller conveyors 2625-500-440 RA1995 Accumulating roller conveyor Nominal/outer width (NB): 500 mm Available conveyor lengths (FL): 2625 mm, expandable with further pieces Further information Manufacturer: Siemens Dematic Type: Accumulation roller conveyor Accumulation size: 750 mm Year of manufacture: unknown Condition: good (used) roller width (RB): 440 mm roller pitch: 125 mm variable drive type: SEW gear motor weight of conveyed material: up to 30 kg Accumulating mechanics: Light barriers with pneumatic valve and cylinder The following accessories are optionally available e.g.: Frequency converter supports side guides Price: on request plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Electric data: 380-400 condition: very good (used) Conveying length in mm: 2625 Nominal / outside width in mm: 500 Roll width in mm: 440 Ro ...

Forklift battery charger, industrial charger, forklift battery charger, industrial charger, Si rectifier -Charger: for forklifts, type D 24/200 MULTI WF200 -Input voltage: 400 V 50 Hz -Power: 24 V/200 A -Dimensions: 555/520/H890 mm -Weight: 119 kg

electric motor, three-phase motor -Manufacturer: Euromotori, electric motor type ASA 200LB-2 -Power: 37 kW -Speed: 2960 rpm -Shaft: Ø 55 x 110 mm -Design: B3 Protection class: Ex -Dimensions: 825/396/H570 mm -Weight: 335 kg

Used machine, Woma Twinjet 550 Z - 250 M Working pressure: 550 Z, P35 1,300 bar-143 lpm, 250 m, P18 2,500 bar-31 lpm Year of construction 2014 Drive: electric 500 kW Operating hours: approx.: 1,305 h, 3 gun Control , and accessories

PLC control, digital input -Manufacturer: Siemens, Simatic S7-200 EM 223 -Type: 6ES7 223-1BF00-0XA0 / 6ES7223-1BF00-0XA0 -Quantity: 1 module available -Dimensions: 105/80/H60 mm -Weight: 0.2 kg

Controller KRC 4, KSS 8.3.42, range 2896mm, nominal load capacity 240 kg, weight 1145 kg, IP65, data cable, motor cable, smartPad 4, tested, warranty

Standard, IP 65, A4-A6, weight 99 kg, max. load capacity 240 kg, warranty

Unused, stock item, Model Standard, A4- A6, IP 65, max. load capacity 30 kg, weight 99 kg, warranty

Motor roller, drum motor, belt sander, belt grinder -Spare part for: EHEMANN grinding machines -Drum: Ø 176 mm -Drum length: 430 mm -Speed: 2800 rpm -Power: 3 kW -Shaft mount: Ø 28 mm -other sizes also available in stock -Weight: 50 kg

Several transformers for sale: Here a Schneider Electric 250KVA 10-0.4KV. Bj2016 mint condition Technical data can be found on the nameplate. The transformers are all electrically tested, (transmission-insulation-resistance-etc.) We have many more transformers in stock, also some 10,000-1000V transformers are available

Geared motor, electric motor, three-phase motor -Speed: 150/225 rpm -Power: 0.12/0.2 kW -Brake: 24 V -Design: B5 -Shaft diameter: Ø 15 mm -Protection class: IP 44 -Weight: 10 kg

Bosch starter motor -Voltage: 24 V 7.5 kW -Type: 0-21000-3391 -Teeth: 11 -Weight: 15 kg

three-phase motor, electric motor -Condition: unused -Engine data: -Power: 75 kW -Speed: 2970 rpm -Voltage: 380-420 V (delta-star) -Protection class: IP54 -Type: B3-B5 -Shaft: Ø 65 mm -further data see photo type plate -Dimensions: 1030/770/H600 mm -Weight: 610 kg

electric motor, three-phase motor -Input: 415 volts -Power: 55 kW -Speed: 2950 rpm -Shaft diameter: 60 mm -Design: B5 -Protection class: IP 54 -Dimensions: 930/600/H610 mm -Weight: 380 kg

# 3D Systems ProJet 2500Plus (Baujahr 2016) Gebrauchter MultiJet-Drucker in sehr gutem Zustand, ursprünglich als Händler-Demomaschine eingesetzt. Die Maschine basiert auf der MJP-Technologie (MultiJetPrinting) und eignet sich für die Fertigung hochauflösender Prototypen und Funktionsteile. Technischer Zustand Die Maschine wurde kürzlich gewartet und mit neuen Antriebsriemen sowie neuen Filtern ausgestattet. Alle Materialien wurden herstellergerecht entfernt, die Maschine wird leer übergeben. Die Betriebsstatistik weist ca. 1.400 Druckstunden und 181.000 gedruckte Layer aus. Verarbeitet wurden bislang ca. 24 kg Baumaterial und ca. 33 kg Stützmaterial. Lieferumfang 3D Systems ProJet 2500Plus Drucker 3D Sprint Basic Complimentary Software (Online-Aktivierung) Standort Die Maschine befindet sich in Budapest und kann nach Terminvereinbarung besichtigt werden. Der ProJet 2500Plus eignet ...

Technical Specifications & Performance Data The Used Bertolaso Inspector 2002 Push 210 is a compact, reliable inspection station engineered for quality assurance on a used bottling line handling still wine in glass bottles. Designed to monitor fill-level accuracy and closure presence, it helps producers maintain consistent packaging quality and reduce downstream rejects in beverage production environments. Manufacturer / Model: Bertolaso Push 210 Year: 2002 Category: Inspector (Inspection type: 2 – fill level and closure presence) Condition: READY FOR OPERATION Container types: Glass (inspection station primarily configured for glass bottles) Bottle formats: 0.06 L, 0.375 L, 0.75 L Product types: Wine (still) Core functions: Automatic minimum/maximum fill-level control; cap/cork presence check; automatic reject to external area Auto-calibration: Continuous self-calibration using the pr ...

BCS Autobox 2600 + Multicut 3, Year 2017,, Max.Sheet width: 2600 mm, Auto set slotting tools, Auto set Creasing tools, Autoset. Tool less size change, Feeder with capacity 300 mm height of blanks, Typical set-time of 1 minute, High speed up to 100m/min, Over 50 Fefco box styles possible, Bmjpclzewxl, Handles singe to double wall corrugated board (max. 10 mm), Touch Screen Control panel for easy programming of new or stored box size and styles

AIR DRYING TUNNEL, for strands, dimensions 2.000 x 300 mm. (or bespoke), blower on bottom with 2 conveyors which send air through slits, constructed in AISI304 stainless steel

CINCINNATI-MILACRON TWIN SCREW EXTRUDER, for PVC profiles, extruder with 2 x 45 mm conical screws, average production 100 kg/h, 14 kw drive, for profiles with max width 250 mm., calibration desk with 2 pumps x 5 kw, caterpillar pull off unit, contact length 1500 mm, width250 mm., planetary saw, collection table, installed power - used power in work: about 60-65% : 14, capacity: 100 kg/h ca, screws: 45 mm. conical

SINGLE SHAFT SHREDDER 150 kw (or 180 kw), sturdy structure in electro-welded steel, cutting chamber dimensions mm. 2000x1000, electro-welded sheet metal hopper for top loading, installed power on the rotor 75 + 75 kw optional 90 + 90 kw, hydraulic unit power 11 kw (15 HP), transmission by belts, 1 rotor, rotor diameter 480 mm., rotor length 2000 mm., 122 reversible tools, 4 usable tool sides, 8 upper fixed blades, 8 lower fixed blades, 73 average rotor revolutions/min., weight 13000 kg, production 3500-5000 kg/h, emergency stop, drawer inversion system, supports for bearings with sealing system against dust and liquids, Adjustable steel counterblade, hydraulically operated pusher drawer with 1000 mm of useful stroke, transmission system by means of pulleys and belts, electrical panel according to EEC standards with inverter, SIEMENS main internal board, Power: 150 kw or 180 kw, width: 2. ...

The plant was shut down in 2024 and has 19,900 hours of use. It has been operating at around 19-21 MW/h LM2500 plant, including dismantling and logistics management, with immediate delivery. The plant was shut down in 2024 and has 19,900 hours of use. It has been operating at around 19-21 MW/h Power Output: 22 MW 25,759 KVA x 0.80 (50 Hz) 11,000v (It can be adapted to 60 Hz) Working Hours: 19.900 Number of starts: 215 Last Start: Jun 2024 Control Panel: Woodward Micronet and Bently Nevada Auxiliary Systems: Included Available documentation: work history, MTU review, single-line diagrams, manuals, periodic inspections. Complete control room with Woodward Micronet control units, Bentley Nevada vibration monitoring, ABB protection relays, and Siemens HMI. Gearbox and alternator -- ABB 50/60 Hz, 11,000V Filter box and enclosure.

Tool steel, round material, shaft sectionShaft, steel block, shaft sawnCold work tool steel 1.2842Material section 400 mm x length 165 mmNet weight: approx. 160 kgMaterial number: 1.2842Material abbreviation: 90MnCrV8Cold-work tool steel with high hardness acceptance and good dimensional stability during hardeningApplication in toolmaking for cutting, punching and embossing tools.Rollers and profile rollers, measuring tools, guide rails, paper cutting knives. Delivery condition: Annealed to max. 229 HBug strength in delivery condition: 770

electric motor, three-phase motor -Manufacture: Siemens Atlas Copco, electric motor from compressor Atlas Copco type GA 408 Pack -Type: 1RA6 183-2AB 51-Z -Power: 30 kW -Speed: 2925 rpm -Shaft: Ø 55 x 110 mm -Design: B5 -Dimensions: 625/480/H395 mm -Weight: 156 kg

Replacement column for IDRA 2500, D300mm x 7115mm, (2), 210779, Idra, refurbished Special price Replacement column for IDRA 2500, D300mm x 7115mm,Trapezoidal thread TR 300 x 10, 3944 kg Refurbished! The column has been overhauled by Strate, is in the original packaging and is in top condition ready for immediate use. We store them in a dry and thermally insulated room. The column can be inspected, tested and collected from us at any time. We would also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, spar nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300

NEW, width 200 cm, 250 kg net weight, 0.70 m³ capacity, with Dieci Agri Farmer intake

NEW, width 220 cm, 266 kg dead weight, 0.75 m³ capacity, with JCB Q fit mount

260 cm working width, with Volvo BM mount suitable for L50-L120 wheel loaders (as well as Liebherr, Komatsu etc.)

NEW, 200 cm width, 0.84 m³ capacity, 303 kg dead weight, with JCB Q fit mount

NEW, 200 cm width, 0.84 m³ capacity, 303 kg dead weight, with JCB Q fit mount

NEW, working width 200 cm, with Terex TL80 / TL100 mount

NEW, 250 cm width, 2.15 m³ capacity, 585 kg dead weight, with Merlo ZM2 attachment, Also other recordings such as Atlas, Avant, Bobcat, Cat, Claas, Deutz Fahr, Dieci, Faucheux, Genie, Giant, Hercules/Everun, JCB, John Deere, Kramer, Liebherr, Mailleux, Manitou, Merlo, Mustang, New Holland, Paus, Schäffer, SMS, Terex, Volvo, Weidemann, Zettelmeyer available!

NEW, width 200 cm, 250 kg dead weight, 0.70 m³ capacity, with Merlo attachment

NEW, 220 cm width, 550 kg deadweight, 1.90 m³ capacity, with Merlo ZM2 attachment, Also other recordings such as Atlas, Avant, Bobcat, Cat, Claas, Deutz Fahr, Dieci, Faucheux, Genie, Giant, Hercules/Everun, JCB, John Deere, Kramer, Liebherr, Mailleux, Manitou, Merlo, Mustang, New Holland, Paus, Schäffer, SMS, Terex, Volvo, Weidemann, Zettelmeyer available!

NEW, 120 cm long tines, 2 t load capacity, with Terex attachment (81 cm attachment width, 433 mm attachment height, top 35 mm, bottom 35 mm)

NEW, 200 cm width, 493 kg dead weight, 1.75 m³ capacity, suitable for Merlo ZM2 attachment, Also other recordings such as Atlas, Avant, Bobcat, Cat, Claas, Deutz Fahr, Dieci, Faucheux, Genie, Giant, Hercules/Everun, JCB, John Deere, Kramer, Liebherr, Mailleux, Manitou, Merlo, Mustang, New Holland, Paus, Schäffer, SMS, Terex, Volvo, Weidemann, Zettelmeyer available!

250 cm width, approx. 2.63 m³ capacity, 583 kg dead weight, with Atlas mount

NEW, 200 cm width, 493 kg weight, 1.75 m³ capacity, suitable for Manitou attachment, Also other recordings such as Atlas, Avant, Bobcat, Cat, Claas, Deutz Fahr, Dieci, Faucheux, Genie, Giant, Hercules/Everun, JCB, John Deere, Kramer, Liebherr, Mailleux, Manitou, Merlo, Mustang, New Holland, Paus, Schäffer, SMS, Terex, Volvo, Weidemann, Zettelmeyer available!

NEW, 250 cm width, 583 kg dead weight, 2.63 m³ capacity, with Kramer Claas Scorpion attachment

NEW, 250 cm width, 2.15 m³ capacity, 585 kg dead weight, with Manitou attachment, Also other recordings such as Atlas, Avant, Bobcat, Cat, Claas, Deutz Fahr, Dieci, Faucheux, Genie, Giant, Hercules/Everun, JCB, John Deere, Kramer, Liebherr, Mailleux, Manitou, Merlo, Mustang, New Holland, Paus, Schäffer, SMS, Terex, Volvo, Weidemann, Zettelmeyer available!

BIG volume bucket 240 cm with JCB Q-Fit attachment, - Construction year: 2025, - working width: 240 cm, - own weight: 351 kg, - capacity: 1.01 m3

BIG volume bucket 240 cm with JCB Q-Fit attachment, - Construction year: 2025, - working width: 240 cm, - own weight: 351 kg, - capacity: 1.01 m3

BIG volume bucket 200cm with Liebherr 509 attachment, - Construction year: 2025, - working width: 200 cm, - own weight: 493kg, - capacity: 1.72 m3

240 cm width, 569 kg dead weight, approx. 2.55 m³ capacity, with Schäffer attachment, LxWxH: 240x139x118 cm