plus used for sale

Gas and oil burners, oil burner filters, heating oil filters, filter and deaerator units, heating oil deaerators -Manufacturer: oilon, filter and vent unit unused, original packaging -Type: Oilon Plus -Technical data: see photo of the nameplate -Cardboard dimensions: 370/180/H150 mm -Weight: 1.8 kg

Boekels EWK 1500 PLUS WS1,25kSD inline checkweigher with reject device, weight range up to 1500 g (working weight up to 1250 g), calibration value e=0.2 g, accuracy +/- 0.2 g, belt width approx. 150 mm, length of infeed belt approx. 300 mm, length of outfeed belt approx. 300 mm, length of weigh cell approx. 300 mm, belt speed up to. 0.5m/s, capacity up to 100 weighings per minute, electrics 230V/50Hz, connected load 600 VA, machine floor space approx. 1050 x 1020 mm (WxD), machine height approx. 1700 mm, machine net weight approx. 245 kg

tester, torque wrench, torque tool, torque wrench tester, torque wrench tester -Manufacturer: Norbar, Digital torque tester with case -Type: TruCheck 2 Plus -Part No.: 43521 -Measuring range: 3 - 65 Nm -Mounting: 3/8 -Accessories: see photos -Dimensions: 205/60/H110mm -Weight: 3.8 kg

Handtmann VF 608 Plus, vacuum filling machine for filling, portioning, linking, with servo drive, filling capacity up to 2.000 kg/h, pressure up to 40 bar, 300 port./min, portioning from 5-100.000 g., MC control (colour), 10243 operating hours, refurbished condition.

1 x MX gatherer - 15 stations (3x5) : 1 x Astronic 180 book sewing machine (year 2006) 1 x Astronic 180/42 (year 2001)

Operator panel, machine control, operating unit, operating panel, handheld terminal, handheld control unit -Control unit: Hand terminal for press brakes or similar use -Connection cable: see photos -Transport dimensions: Ø 400 x 200 mm -Weight: 4.8 kg

Tires, solid rubber tires, forklift tires -Manufacturer: Rota, solid rubber tire type Plus -Tire size: 15x4 1/2-8 RIM 3.00D-8 532/487-2 -Bolt circle: Ø 115 x 18 mm -Recess: Ø 80 mm -Quantity: 1 piece -Dimensions: Ø 380 x 105 mm -Weight: 12.9 kg

Specifications: -cutting length 4500 mm -cutting depth 4300 mm -saw height above the table 115 mm -Max. trolley speed 30 m/min -pusher with 8 pneumatic clamps -3 x 1500 x 600 front shelves coated with bakelite -main saw fi 380 mm -saw motor 7.5 kW – weight 4400 kg -scoring motor 1.5 kW -current consumption 55 A -suction 2 x 120.1 x 150 mm -dimensions 7000 x 8200 x 1700 mm

Reamer, twist drill, drill bit, spiral countersink, three-flute, twist drill -Three-knife -Diameter: 17.75 mm -Usable length: 150 mm -Recording: MK2 -Type: HSSE Quantity: 19 pieces -Sale: only complete set -Weight: 6 kg

Linear drive, linear gearbox, lifting gearbox, spindle drive -unused: from warehouse clearance -Travel distance: 550 mm -Motor mount: Ø 19 mm -Dimensions: 13/130/H1000 mm -Transport dimensions: 200/200/H1100 mm -Number: 3x linear bearings available -Price: per piece -Weight: 14 kg/piece

Inv. Num. : 7182 Type: Crysta Plus M544 Producer: Mitutoyo Created: 2012 Parameters: Table dimensions: 860 x 638 mm Axis X: 505 mm Axis Y: 405 mm Z axis: 405 mm Max. workpiece weight: 180 kg Machine dimensions: 2185 x 1082 x 1078 mm Machine weight: 440 kg

Width 68 cm Year of construction 2006 Lifting Punching Machine Computer control with monitor Touch screen Price on request. We deliver and install worldwide!

Heating- and drying oven for temperatures from +20°C up to 300°C. Special turnstile drive for 1L bulkhead jars, TwinDISPLAY. Max. loading of chamber: 300 kg.

- Convection oven from Wachtel with clipboard, proofer and exhaust hood - Convection oven is Thermico Plus with IQ Air control - Oven is for 5 trays 60x40cm - Proofer is for 16 trays 60x40cm -Electrical. Connected load: 13.7 kW - Year of construction: 11 / 2017 Dimensions: - 97cm wide - 85cm deep - 205cm tall

- Make: Copper mill - Type: Vuin-plus 600 - Year of construction: 1991 - Working width: 600 mm - Working height: 250 mm - Working height 4-sided: 200mm (up to 250 mm possible) - Number of working shafts: 5 (+2 chamfer units at the top) - Wave arrangement: bottom-up-right+left-down - Lower and upper knife shaft with 4-reversible Leitz Sinus knives - Right and left planer head with 4 reversible blades - Lower fifth shaft for saw blades, profiles, plaster shaft, etc. - Spindle diameter: X-X-40-40-40 mm - Motor power(s): 11-15-11-11-11 kW - Chamfer motors top: 2 x 1.85 KW - Feed speeds: 4-30 m/min - Feed motor: 4 kW - Driven rollers in the table: 3 - Top feed rollers: 4 - Pull-out transport rollers: 2 - Table height constant: approx. 900 mm - Weight: approx. 3800 kg

Lifting mixer Diosna D240 Plus Lifting kneader Diosna D 240 Plus with fixed kesel - with stainless steel boiler - Kettle for a maximum of 240 kg of dough or for a maximum of 150 kg of flour - 2 speeds slow and fast - with flour dust cover - Mobile on castors - 380 volts - Machine completely repainted

WE OFFER AN NICE CONDITION TWO MACHINES EMCO HYPERTURN 665 WITH BARR FEDERS AND TOOLS ACCESSORIESS YEAR: 2005 FULLY FUNCTIONAL , READY TO WORK CONNECTED ON POWER. FOR THE CUSTOMER WE ORGANIZE DISMANTLING LOADING AND TRANSPORT TECHNICAL DATA: Specifications: Max. swing diameter 430 mm dia. Max. rotary. About Bed 600 mm Dia. Turning length 744 mm Distance between spindle lugs 975 mm Main engine power 21/29 kw Main spindle speed range 0-5000 rpm Bore through drawing tube 65 mm dia. C axis - main spindle movement 0.001 degree Y axis 100 +/- 50 mm B Axis Movement Stepless 45 Degree Tool turret 1 with 12 VDI 30 stations Powered stations turret 1 12 pc. - 4000 rpm Y+B pieces. Engine power driven tools 6.7 Kw Tool turret 2 with 12 pc. VDI 30 stations Counter spindle C axis - counter pindel movement 0.001 degree Counter spindle speeds 0-5000 D46485 Pr/mi ...

Matsuura Horizontal Machining Center CNC control Matsuura G-tech 16i Pallet table size 500x500 mm Number of pallets: 6 Table load 400 kg Spindle speed 15000 rpm If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail.

floor-plate length: 3000 mm floor-plate width: 1500 mm floor-plate height: 150 mm total power requirement: kW weight of the machine ca.: 750 Kg dimensions of the machine ca.: 3,0 x 1,5 x 1,3 m The welding table is made of 15 mm thick steel plates. assembled and welded. The table stands on height-adjustable feet. The mounting holes for the assembly and fastening parts have a diameter of 28 mm. A starter package with alignment and fastening parts is included at a price of € 750,00 (price is included) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Metrohm 848 Titrino plus Titrator Dynamic Titrations (DET) with automat. Equivalence point Montone Titration (MET) with automat. Equivalence point Endpoint Titartion (SET) Red-Ox titare ions (e.g. iodometry, permanganometry, etc.) Complexometric titrations Titarions with pol. Electrodes (I pol.; Upol) etc.

Plasma cutting model SLIMCUT PLUS Plasma Plus brand Purchased in 2021 complete with CEBORA Sound PC130/T generator.

EPSM / Biological Safety Station ESCO AIRSTREAM PLUS (AC2-5E8-TU) 1.5m New equipment in its original packaging Complete package including: PSM ESCO Airstrem plus class II AC2-5E8-TU with a length of 150cm (1.5m) A UV-30A UV lamp A fixed stand with levelling feet Height: 71cm SAL-5A0 GEN2 2 internal sockets TüV NORD EN 12469 certified model Automatic regulation and malfunction alarm and dry contact for alarm reporting Economical dual motors ensure permanent and stable flow control Removable stainless steel worktop, with a large work surface and inclined undermount for liquid retention LED lighting Control panel with clear flow display, glass position Quiet operation The PSM are equipped with 2 electrical outlets and a UV lamp Depth without armrest: 767 mm / with armrest: 823 mm Motorized front window, stops at working position External stainless steel arm rest on  ...

Inv. Num. : 7719 Type: VK-500G Producer: PSG Plus Created: 2020 Parameters: Internal dimensions of the machine (LxWxH): 400 x 200 mm

It is a used, reconditioned Diosna mixer S 120 Plus (for max. 120kg dough / 75kg flour) for sale. The machine is in very good condition and fully functional. The mixer has a stainless steel bowl, stainless steel kneading arm, a flour dust cover, two speeds and is mobile. The machine has a new control system with two timers. A video can be sent on request. Price on request.

One used Müller Martini Inventa Plus 3212 Year of man. 2001 Max. Size : 320 x 385 mm Min. Size : 80 x 120 mm Mechanical Speed : 20-200 Cycles/Min

5 feeders 370 1 cover feeder 1529.0416 (s/n NN26787) 1 stitching unit Bravo MM 380.0450 (s/n MMZ01077446) + 2 x HK75 heads 1 MM 449 trimmer 1 Rima stacker 3 x compressors Counter : 10 511 working hours More pictures available upon request.

Formats 80 x 95 - 760 x 330 mm Speed 160 m/min

• This workstation was configured for a cleanroom class D and max. for OEB3 substances (medium toxic material) • Via the laminator in the bonnet area, H 14 filtered clean air in ISO 5 quality in accordance with EN 14644-1 with unidirectional flow and a flow velocity of 0.17 m/s to 1.00 m/s - depending on the product and task - is channelled into the interior of the barrier above the product, creating a cleanroom zone. • The visible surfaces are made of stainless steel 1.4301 and are brushed (RA

Key data: 800 mm, 550 mm, 500 mm

Machine Details Stock-No. 1105-04029 Type of machine Machining Center - Vertical Make MATSUURA Type V PLUS-800 Year of manufacture 2002 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Delivery time immediately Freight basis from location, uncharged Price Technical details control Siemens 840D X-Travel 800 mm Y-Travel 550 mm Z-Travel 500 mm type of pallet-changer TABLE 1150 X 550 MM plate size 1150 x 550 mm number of tool places 30 Pos. tool taper SK 40 total power requirement 15/18 kW weight of the machine approx. 6 t dimensions of the machine approx. 3.6 X 2.600 m Additional information The machine can be visited by appointment by electricity. The machine is in very good condition. Changes and errors in the technical data and information Subject to prior sale!

Standard equipment Main switch Tapping device Control panel with OLED display Robust, high-quality drill head hood with ergonomically inclined front LED lighting Quickly adjustable and ergonomic drilling depth stop Stepless speed control via central rotary knob EMERGENCY STOP push button Thermal overload protection Spindle stop Drilling protection with electr. Hedge Connection cable with CEE plug 3-year warranty for single-shift operation Specifications Continuous/normal drilling capacity (mm) 23/25 (in E335/ST60) Tapping capacity (pitch dependent) M16x1 Spindle MK III Drilling depth (mm) 115 Projection (mm) 260 Column diameter (mm) 110 Usable work surface (W x L) (mm) 420 x 340 T-slot size (arm), spacing (mm), dimension width (mm)Quantity 2, 125, 13/26 Speed display: digital Drilling depth display: digital Drilling depth stop: quickly adjustable stop ring Fee ...

used lifting mixer Diosna D 200 A Plus extendable, in baker's condition, checked and tested, works perfectly, 200 kg dough per kettle, 1 o'clock, 2 courses, with 1 stainless steel kettle, stainless steel kneading arm, if necessary with another kettle for an additional 4,000€

x-travel: 2000 mm y-travel: 800 mm z-travel: 800 mm Control: Haidenhain 426 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Fully functional used Horizontal CNC Machining Center MAXIA Matsuura H. Plus 405 PC-12 Year of construction 2009 Fanuc Control 30i Tool magazine for 400 tools Pallet storage for 12 pallets 2 pieces of pallets 500mm x 500mm included 10 pieces of pallets additional for 3.000,- € / piece Glass scales Spindle up to 10,000 rpm, last spindle replacement July 2019 Spindle Holder SK40 DIN 69871 Big+ Spindle motor 36/24 kW Max. torque 254 Nm to 900 rpm Knoll coolant system Scraper Belt Chip Conveyor 24l/min at 70 bar, tank capacity 1300 liters Regular maintenance by the manufacturer Matsuura You can find more information in the pictures or ask us. Location of the machine: 76530 Baden-Baden The machine can be viewed on site. It is still energized and works perfectly. We would love to hear from you.

Used machine in good condition. Available for immediate delivery. - Travel (X x Y x Z): 1.060 x 510 x 635 mm - Control: SIEMENS 828D - Working area (X x Y x Z): 1.200 x 500 mm - Max. workpiece weight: 800 kg - Max. spindle speed: 8.000 rpm - Spindle type: BT 40 - Dimensions (long x wide x high): 2.910 x 2.690 x 2.815 mm - Weight: 7.500

Air table 2 side tables 3 knives Photocells Program Video available upon request

Stapelauslage / Stacking Delivery Palamides Alpha 700 Plus Baujahr / Year 2011 - Serial-No. 2502 Minimalformat / Size minimum 120mm x 90mm Maxmimalformat / Size max. 330mm x 510mm Stapelhöhe / Stack height 10 - 160mm Geschwindigkeit / Speed 15 - 200m7min Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Key data: 1400 mm, 630 mm, 500 mm

Table size 1800 x 630 mm Speed range 56 - 2800 1/min Tool holder ISO 50 Travel X / Y / Z 1400 / 630 / 500 mm Feed range X, Y 10 - 2000 (Z 2.5 - 500 ) mm/min infinitely variable Main motor 15 kW, connected load approx. 20 kW Incl. Universal milling head IUG 32A swivel 360° horizontal milling spindle Rapid traverse, automatic cycle Digital display Heidenhain ND 750 Coolant Setup Work area cladding hydraulic tool clamping CE Declaration of Conformity

ESC-HIGH PRESS ´PLUS´ E3 Model 0 max. print size: 510 x 720 mm max. sheet size: 520 x 720 mm min. sheet size: 270 x 350 mm gripper margin: 10 mm Additional equipment: - RKS squeegee system - Antistatic device with control unit AFC-2 and SCPB electrodes 530 with cable length 180 cm including connector HV-4 - integrated cleaning station system TEKNEK in the machine inlet - equipped with ESC leading edge feeder A dryer can also be added /listings/3715380-used-wicket-long-term-dryer Find more here - /

used bread slicer Schickart TS/38 plus, overhauled, 400 V, 0.75 kW

Surface Grinding Machine FAVRETTO MC130, 1300x700 mm, magnetic plate, sistem Digit Plus FAVRETTO, Information about technical data are not binding., Machine available subject to prior sale., Max working dimensions: 1500x750 mm, Working table size: 1300x500 mm, Longitudinal travel x axis: 1640mm, Cross travel y axis: 650 mm, Clearance between worktable and spindle axis: 850 mm, Feed rate x axis: 1 - 40 m/1, Feed rate y axes: 0 - 2000 m m/1, Wheel speed: Stepless by Variable speed drive AC, Wheel dimension: 400x152,4x100 mm, Spindle motor power: 15Kw, Nc: Digit FAVRETTO, Weight: 8.000 Kg, Accessories: Electro permanent magnetic plate 1300x500 mm, coolant tank with paper filter

Bread cutter Wabäma Model: Allround Economy Plus 450.200 Max. number of slices: 100 pieces/min. max. bread dimensions: 450 x 200 x 140 mm, WxDxH Knives made of high-quality Teflon special coating Machine mobile Cutting thickness adjustable from 4 to 20 mm Connection 400V, 1.0 kW, 16A-CEE plug Dimensions: 1000 x 750 x 1150 mm, WxDxH Used machine cleaned Option: Maintenance contract Spare blade Service Package Many bread slicers are waiting for you in our warehouse!