plus used for sale

: 150 t : 3100 mm : 2600 mm : 400 mm : 200 mm : 600 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

We sell 10 x HP DL380 Gen10 Plus each configured with: 2 x Intel Xeon 6342, 2.80GHz 1024GB RAM (16x64GB) No disks, no RAID card. In most cases, the entire lot can only be handed over in its entirety. More information on request. In most cases, advertised products can only be sold as a complete lot. More information on request. We look forward to receiving inquiries from Germany and internationally. We have many more refurbished/used hardware from the areas of the systems mentioned here as well as from the areas of other systems from these manufacturers available: IBM, DELL, HPE, ORACLE, NETAPP, QUANTUM, STK, FUJITSU, SGI, HDS, EMC, Supermicro, BULL, NEC, CRAY, 3Com, ADVA, Alcatel, Brocade, Cisco, Enterasys, Extreme Networks, Huawei, Marconi, Nortel, Qlogic, Avaya, ORACLE Tested, tested used hardware at low prices from HASCON! Sales are only made to companies.  ...

Cold water high-pressure cleaner and hydraulic oil demand unit. Working pressure: Infinitely variable up to 320 bar. Required quantity: up to 21l /min (1,260 l/h) Pump: 3-plunger, all-ceramic Engine: 2 cylinders 4 stroke petrol engine Motor power: 16.4 kW Speed motor/pump: 3,250/1,450 rpm Pump drive: Gearbox Fuel consumption:approx. 5.5l/h Volume fuel tank: 20l Pressure outlet (water) M221,5 AG Heating capacity Olbrenner Empty Weight: 110kg Dimensions(LWH) 757999cm Article no.: 1 486 089

We offer a Doka Framax Xlife plus 330 package 225.72m². Formwork cleaned, checked. Formlining SB 2/3 Original Doka Xlife formlining, ready for immediate use. New value PL 2025/ 26 Doka 232312,00€ Special net price with 80% discount = 46462,00€ 16 589292600 Framax Xlife plus Element 0,90x3,30m 24 589293600 Framax Xlife plus Element 0.75x3.30m 24 589294600 Framax Xlife plus Element 0.60x3.30m 32 589295600 Framax Xlife plus Element 0.45x3.30m 24 589296600 Framax Xlife plus Element 0.30x3.30m Offer only valid while stocks last. Subject to prior sale. If you have any questions, please call 0049 176 70044689 Mr. Bdcker Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Meisterbetrieb Andreas Becker e. Kfm. Tel. 07305/9562350, Fax. 07305/9562352 mobile: 0049 176 70044689 Mr. Becke ...

GE mobile X-ray machine VMX • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany and can be picked up immediately. • You buy the system in "ACTUAL" condition from the warehouse Freiberg (EXW), Saxony, Germany, and advance payment. • The sale takes place as "used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without guarantee. • The installation and configuration of the system or the system components must be carried out by a specialist or technician authorized by the manufacturer!

used cabinet press Manufacturer: HSM Type: V-Press 825 plus pro Year of construction: 2018 Machine no.: 6152.324. Series No.: 570001118 specifications: Pressing force: 25 t Filling opening: 1,195 - 540 mm (W x H) Press box dimensions - 1,200 x 780 x 1,300 mm (L x W x H) Bale size: 1,200 x 780 x max. 700 mm Bale weight: up to 280 kg Drive power: 4 kW Cycle time at idle (theoretical): 39 sec. Binding: 4-fold - vertical with polyband Machine dimensions: 1,700 x 1,248 x 2,370 mm (W x D x H) Machine weight: 1,210 kg (Subject to errors in the technical data)

James Burn JBI DocuPunch Plus Automatic punching machine for calendar sheet punching. With the DocuPunch you can easily and quickly punch small or large runs of calendar pages and book pages. By Interchangeable tools optionally with round or square holes, with or without thumb hole. Easy to use, like a copier! Description: Punching system for calendar sheet punching (tool not available) Compact, on castors, space-saving Adjustable speed Operation via touch screen Quick job change in about 5 minutes Automatic feeding of sheets from high pile feeder Quick tool change in approx. 2 minutes Foldable punches Simple and intuitive format setting Waste containers for stamping waste Standing sheet delivery Technical data: Max. sheet format: 330 mm (binding side) x 300 mm Min. sheet format: 138 mm (binding side) x 1 ...

In-store oven Quail Mini Thermic Plus 10 - Quail Mini Thermic Plus 10 hot air oven - Ovens 5+5 controllable - for 5 + 5 baking trays 60x40cm - Door stop on the right - elek. Power supply: 18.2 kW - with proofing cabinet - Control: Shopmatic 5 Plus Timer - 400 Volt AC /3Ph/N/PE/ 50Hz - Year of construction 10 / 2008

- Thread cutting device - Control panel with OLED display - LED lighting - Quickly adjustable and ergonomic drilling depth stop - Infinitely variable speed control via central rotary knob - Thermal overload protection - Spindle stop - Drilling protection with electr. Hedge - Connection cable with Schuko plug SPECIFICATIONS - Spindle: B16 - Drilling depth: 60 mm - Projection: 220 mm - Column Ø: 70 mm - Spindle/work surface: 140 – 315 mm - Drill head height adjustment: by hand - Speed display: Digital - Drilling depth display: Digital - Feed (mm/revolution): by hand - Spindle speeds infinitely variable: 60 – 6,000 1/min - Continuous/normal drilling capacity: 10/12 mm - Thread cutting performance (depending on slope): M6 - FACTORY WARRANTY: 3 years (single shift) - OPTION Drilling package (No. 296570) Machine vice Flott [felix] 80 and quick-release drill c ...

Standard equipment: robust, high-quality and inclined rotary hood for easy reading of the speed LED lighting quickly adjustable and ergonomic drilling depth stop infinitely variable speed control Connection cable with SCHUCO plug (1.2 m) Undervoltage outlets Drilling protection with electr. Hedge thermal overload protection Emergency Stop Impact Button Weight in kg: 44 Motor kW: 0,45 AC 230 V Speed 1/min: 250-3000 Drilling capacity mm: - Steel Ø 12 mm - Aluminium Ø 20 mm - Softwood Ø 40 mm - Drilling depth 60 mm - Projection 220 mm - Saeulen diameter 70 mm - usable table area (W x L) 300 x 250 mm - T-groove size number 2, distance 100 mm Dimensions width 14/26 mm - Spindle B 16 - Speed display digital - Drilling depth display: scale - Drill depth stop: quickly adjustable stop ring - Feed: by hand - FACTORY WARRANTY: 3 years - free domicile incl. packa ...

Spindle speed infinitely variable electronic 40-4000 1/min Spindle: MK 2 Table height adjustment with rack Thread cutting performance max M12 Setting the thread cutting depth via digital depth display digital speed display digital drilling depth display Drilling depth stop via stop ring Feed / by hand Table height adjustment with rack Continuous/normal drilling capacity steel Ø 15 mm / 18 mm Drilling depth 70 mm Projection 220 mm Mouth diameter 70 mm Usable table area (W x L) 300x250 mm Machine dimensions (W x D x H) 420x520x850 mm Weight 65 kg max distance spindle/table/foot 300/ 370/ 420 mm Motor AC with frequency converter 230 V , 0.54 kW OPTION Drilling package B16 (No. 296570) - Vice felix 80 - Quick-release drill chuck 1-13 mm Price: € 539,- Factory warranty: 3 years Free domicile including packaging (Germany only) Delivery time: immediately from ...

2018 Xeikon 3030 plus 5 colurs digital label press roll to roll Manufacturer: Xeikon Type: 3030 plus Web width: 330 mm Year of production Machine comes with 2 spare developers for Orange and green Key Specifications: Technology: Dry Toner, Full Rotary Print Resolution: 1200 dpi (with 4-bit variable dot density) Web Width: 330 mm (13 inches) Print Speed: Up to 15 meters/min (49.2 ft/min) Colors: 5 (CMYK + Opaque White or Spot/Gamut Color) Substrates: Wide range, including self-adhesive materials (BOPP, PVC, PET), paperboards, and papers (40-350 GSM) Toner: FDA-approved, food-safe Features: Variable repeat length, inline densitometer, potential for inline finishing, metallic label production via ColorLogic, microtext, variable data.

Continuous/standard drilling capacity (mm) 20/23 (in E335/ST60) Thread cutting capacity (depending on pitch) M12 Spindle MK II Drilling depth (mm) 100 Projection (mm) 240 Column diameter (mm) 82 Usable work surface (W x L) (mm) 340 x 280 T-slot size (arm), distance (mm), dimension width (mm) Number 2, 125, 13/26 Speed display digital Digital drilling depth display Drilling depth stop quickly adjustable stop ring Feed (mm/revolution) by hand Table height adjustment with rack Motor three-phase current 400V with frequency converter (kW) 1.5 Spindle/work surface distance (mm) 160 – 880 Machine dimensions without packaging (mm) 355 x 705 x 1825 Machine dimensions with packaging (mm) 572 x 936 x 2142 Weight (kg) 195 Standard accessories: Thread cutting device Control panel with OLED display Robust, high-quality drill head hood with ergonomically inclined front LED li ...

Kneader Diosna S 120 Plus Kneading Machine -with 1 timer -with stainless steel boiler and lifting arm -with flour dust cover -2 speeds slow and fast -Machine is mobile on castors with lock -400 volts

Diosna Kneader Type: S35 Plus Stainless steel boiler Stainless steel lifting arm Flour dust cover 1x timer with lock Height: 100cm Width: 70cm Depth: 70cm

Heidelberg SM 52-2 plus version Age: 2009 Counter: only 799.065 impression (Machine comes from school) Format: 37 x 52 cm Performance: 13.000 sheets/hour Equipment: 2 color Straight machine Pull lay control in Feeder Multiple sheet detector/electromechanical in Feeder Ultrasonic double sheet detector in Feeder Alcolor Baldwin BasicLiner 1.0l, Hydrostar compact Press Center Compact Ink flow control Inking Unit wash up device Blanket Unit wash up device Impression cylinder wash up device EasyPlate Sheet slow down device in Delivery Antistatic device compact in Feeder and delivery Plus version for Nummeration and Perforation Powder sprayer With punch and bender With books

TABLE mm 2600 x 530 ROLLS min. ÷ max. mm 0.4 ÷ 3 STRIP FABRIC MAX MM 5 max. workpiece height min. ÷ max. mm 12 ÷ 50 min length or width processable plate mm 190/65 Speed m/min 7

Continuous/normal drilling capacity 18/20 mm Threading capacity M12 (depending on pitch) Lockers MK II Drilling depth 100 mm Projection 240 mm Column diameter 82 mm Usable work surface W x L 340 x 280 mm T-slot size (arm), distance (mm), dimension width (mm) Number 2, 125, 13/26 Speed indicator: Digital Drilling depth indicator: Digital Drilling depth stop: quickly adjustable stop ring Manual drill feed Table height adjustment with rack Motor three-phase current – frequency-controlled, 230 V, 0.75 kW Spindle speeds infinitely variable 30 – 3000 1/min Table work surface: 155 - 415 mm Footwork: 155 – 550 mm Machine dimensions: 355 x 705 x 1065 mm Weight: 170 kg Optional accessories: Drill package 3: with [felix] 2.0 100 Machine vice Flott [felix] 100, Quick-change drill chuck 3-16 mm (accuracy 0.17 mm), Kegeldorn MK 2 B18 and reducing sleeve MK 2 to Mk 1 � ...

Key data: 2500 mm, 1240 mm, 200 mm

CNC Machining Center SCM Type Z 25 PLUS R4R4 Year of manufacture 2005 Working range X between stops 2500 mm Vertical bores Y 1018 mm Milling Y 1240 mm Plate throughput maximum 180 mm Maximum panel thickness Z = 100 mm Stroke Z axis 200 mm Central lubrication at the top and bottom Drilling unit with 15 vertical spindles 6 horizontal spindles, 4 in the X direction and 2 in the Y direction Spindle speed 4000 rpm. Motor power spindle rotation 2.2 kW Travel speed of the X-Y axes 42.4 m/min. Travel speed Z axis 11.5 m/min. Main spindle approx. 6.6 kW Maximum speed of the main spindle 24000 rpm. Front tool changer with 4 tool holders Rear tool changer with 4 tool holders Rectangular Vacuum Cups 16 Pieces Tool holder HSK 63 Compressed air 6/7 bar, compressed air consumption 150 l Vacuum pump 40 m³/h 3/3.6 kW Air intake speed 30 m/h Suction nozzle diameter 160 +  ...

Brotschneidemaschine verwendet. Sehr guter Zustand.

Diosna D 240a plus with 2 boilers Tipper Diosna HK 166 - after general overhaul

: R10-R260 bending speed: 2,5 U/min : 42x3 mm : 42x2,5 mm : 30 mm : 54x2 mm total power requirement: 1,5 kW weight of the machine ca.: 80 kg dimensions of the machine ca.: 410x1000x570 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- Lifting kneader Diosna S 35 - with stainless steel boiler - for max. 35 kg dough - with 2 speeds - with foot switch - with flour dust cover - Boiler diameter inside: 52cm - Inside boiler height: 35cm

We offer a Doka Framax Xlife plus 330 package 254.10m². Formwork cleaned, checked. Formlining SB 2/3 Original Doka Xlife formlining, ready for immediate use. New value PL 2025/ 26 Doka 276.626,20€ Special net price = 93.744,68€ Pcs. Description 30 Framax Xlife plus Element 1.35x3.30m 10 Framax Xlife plus Element 0,90x3,30m 10 Framax Xlife plus Element 0,75x3,30m 8 Framax Xlife plus Element 0.60x3.30m 8 Framax Xlife plus Element 0.55x3.30m 8 Framax Xlife plus Element 0.45x3.30m 8 Framax Xlife plus Element 0.30x3.30m 8 Framax Xlife plus inner corner C 30/30cm 3.30m 8 Framax outer corner 3.30m 120 Framax Xlife plus Anchor 20.0 15-30cm 120 Framax Xlife plus Anchor Nut I 20.0 120 Framax Xlife plus distance protection NG 250 Framax Toggle Clamp RU 20 Framax Uni-Clamps 10 Framax compensating clamps 16 Framax Console 90 XP 16 railings 1.00m 2  ...

Lifting swaging machine Diosna S 120 Plus A used dough kneader Diosna S 120 for a maximum of 120kg dough, with 2 speeds, slow and fast is for sale and immediately available in our warehouse. Kneader Diosna S 120 - with 1 automatic timer - Machine is revised and repainted - with 2 gears - with stainless steel boiler - with flour dust cover - mobile on wheels with lock

Vertical baler HSM V-Press 860 plus B, built in 2019 Technical data: Manufacturer: HSM Type: V-Press 860 plus B Year of Make: 2019 Hours: 119 Pressing force: 60 t Drive power: 4 kW Filling opening: 1500 x 651 mm Filling height: 1129 mm Bale size: approx. 1500 x 1200 x 780 mm Bale weight: 550 kg Binding: manual Theor. Idle cycle time: 25 s Theor. Pressing capacity: 32.5 cbm/h Dimensions: 2099 x 1245 x 2985 mm (WxDxH) Weight: 2340 kg Materials: foil, paper, cardboard boxes Note: The press is in very good condition. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offers are subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale is made ex location, without guarantee and g ...

Stock Number: 3780 CNC LATHE Manufacturer: EMCO, Type: HYPERTURN 665 MC PLUS Machine NO.: R7AQ2301, Year of manufacture: 2002 Specifications: Max. swing diameter 430 mm dia. Max. rotary. About Bed 600 mm Dia. Turning length 744 mm Distance between spindle lugs 975 mm Main engine power 21/29 kw Main spindle speed range 0-5000 rpm Bore through drawing tube 65 mm dia. C axis - main spindle movement 0.001 degree Y axis 100 +/- 50 mm B Axis Movement Stepless 45 Degree Tool turret 1 with 12 VDI 30 stations Powered stations turret 1 12 pc. - 4000 rpm Y+B pieces. Engine power driven tools 6.7 Kw Tool turret 2 with 12 pc. VDI 30 stations Counter spindle C axis - counter pindel movement 0.001 degree Counter spindle speeds 0-5000 Pr/min Motor power counter spindle 17/22 Kw Control Siemens 840 D Fabr. Power on 10650 hours Controlled in 8 axis - x1-x2-z1 ...

For vegetable

SM 52 4 Plus version Autoplate all wash untis alcolor CPC 1.04 inking unit temperature control

Sm 52 2 25 mil Straight Autoplate all wash units tecnotrans year 2001 still in production

NEW ex works Standard equipment - Threading device - Control panel with OLED display - Robust, high-quality drill head hood - LED lighting - Quickly adjustable and ergonomic drilling depth stop - infinitely variable speed control via rotary knob - thermal overload protection - Spindle stop - Drill protection with electr. Hedge - Connection cable with CEE plug - Mechanical feed of the Z-axis - Incl. electromagnetic clutch for 3 feed speeds - Drill cross with push button - in tapping mode: right-left SPECIFICATIONS Continuous/normal drilling capacity (mm) R1 - 30/35 (in E335/ST60) R2 - 27/32 (in E335/ST60) R3 - 35/40 (in E335/ST60) Thread cutting capacity max.: R1= M30x3,5 / R2= M24x3 / R3= M36x4 Spindle MK IV Drilling depth: 160 mm Projection: 300 mm Column diameter: 140 mm Usable table area (W x D): 590 x 450 mm Digital speed display Digital drilling depth  ...

Vertical baler HSM V-Press 860 plus, built in 2019 Technical data: Manufacturer: HSM Type: V-Press 860 plus Year of Make: 2019 Hours: 311 Pressing force: 60 t Drive power: 4 kW Filling opening: 1195 x 645 mm Filling height: 1114 mm Bale size: approx. 1200 x 1200 x 780 mm Bale weight: 480 kg Binding: manual Theor. Idle cycle time: 25 s Theor. Pressing capacity: 12 cbm/h Dimensions: 1800 x 1253 x 2990 mm (WxDxH) Weight: 2213 kg Materials: foil, paper, cardboard, punching residues, clothing, big bags, polystyrene Note: The press is in very good condition. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offers are subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale i ...

used cabinet press Manafacture: HSM Type: V-Press 840 plus Year of construction: 2011 Machine No.: 6147.244. Serial No.: 340001635 Z specifications: Pressing force: 36 t / 356 kN Transport length approx. 1,780 m Transport width approx. 1,247 m Transport altitude approx. 2,985 m Insertion opening width approx. 1,195 m Insertion opening height approx. 0.65 m Drive power 4 kW Weight approx. 1.8 t Bale weight up to approx. 360 kg Binding: 4-fold vertical (Subject to errors in the technical data)

Vertical baler HSM V-Press 860 plus, built in 2019 Technical data: Manufacturer: HSM Type: V-Press 860 plus Year of Make: 2019 Hours: 433 Pressing force: 60 t Drive power: 4 kW Filling opening: 1195 x 645 mm Filling height: 1114 mm Bale size: approx. 1200 x 1200 x 780 mm Bale weight: 480 kg Binding: manual Theor. Idle cycle time: 25 s Theor. Pressing capacity: 12 cbm/h Dimensions: 1800 x 1253 x 2990 mm (WxDxH) Weight: 2213 kg Materials: foil, paper, cardboard, punching residues, clothing, big bags, polystyrene Note: The press is in very good condition. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offers are subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale i ...

Vertical baler HSM V-Press 860 plus B, built in 2019 Technical data: Manufacturer: HSM Type: V-Press 860 plus B Year of Make: 2019 Engine hours: 141 Pressing force: 60 t Drive power: 4 kW Filling opening: 1500 x 651 mm Filling height: 1129 mm Bale size: approx. 1500 x 1200 x 780 mm Bale weight: 550 kg Binding: manual Theor. Idle cycle time: 25 s Theor. Pressing capacity: 32.5 cbm/h Dimensions: 2099 x 1245 x 2985 mm (WxDxH) Weight: 2340 kg Materials: foil, paper, cardboard boxes Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offers are subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale is made ex location, without guarantee and guarantee. Our payment term is 100% p ...

Leimo Plus Gluing press The new, innovative gluing press for clamping frames operable by one user for gluing drawers, carcasses, frames and surfaces, etc. Basic: 3 pressing units with angular gearbox 90° stop and lateral pressure device with angular gearbox Clamping dimensions: 1170 x 2300mm 3 pressing units with trapezoidal spindle 1 side pressure with 2 trapezoidal spindles 2700x700x1750mm G&FE-LEIMO-PLUS

RPW 3000 plus Frame press Clamping dimensions 1600x2900mm Frame 1600x2600mm Contact pressure of 1 t, self-locking, 140 mm travel Versatility - many applications (frame, body, surface gluing) Work facilitation - ergonomic posture Time savings due to user-friendly operation Frames are bolted and can therefore be dismantled Galvanized press units Basic: 3 pressing units with adjustable angular gears, 150mm adjustment range with 2 tons of compressive force! and 90° stop G&FE-RPW-3000PL OPTIONS AT EXTRA COST: Side pressure device with 2 angular gears Hold Chassis

Thin-cut creel Wintersteiger type DSG Eko Plus Specifications: • Cutting height (mm): 200 • Cutting width (mm): 200

Ref. -No.: 10372 Manufacturer: STAMA Year of construction: 2021 Type of control: CNC Control: SINUMERIK Siemens 840 D sl Storage location: Halberstadt Country of origin: Switzerland Turning Speeds: 4200 RPM X-axis travel: 615 mm Y-axis travel: 290 mm Z-axis travel: 500 mm Number of tools in the chain magazine: 64 Max. Rapid traverse: 65 m / min Max. Feed force: 4000 N Acceleration (X): 7 m/s² Acceleration (Y): 9 m/s² Acceleration (Z): 13 m/s² Further information: - Ball screw - Automation - Workpiece loading/unloading chuck parts with X- / Z- gantry loader - Clamping pressure preselection 15 - 50 bar for both spindles - Buffer station for constant short chip-to-chip times - NCU High Performance NCU 730.3.m - Magnetic gripper

Unused, soundproofed, rollable, diesel generator set built in 2023 with key start Manufacturer: PLUS POWER Type GF2-6 - Electric Start Power 7 kVA 5,5KW Year of construction 2023 Hours 0 Engine 1 cyl, diesel with starter and battery, very economical! Key Start Generator 3 phase, 220/380V, 9.5A, 50Hz, Soundproofed incl. spare fuel filter, air filter and heavy-duty rollers. Dimensions width approx. xxcm, depth approx. xxcm, height approx. xxcm, weight approx. xxkg. Unused, immediately available. The device must be filled with engine oil before it can be put into operation! Incl. spare air filter, spare fuel filter, heavy-duty rollers, hopper. Imported by: MEDIAMQ OP VALENCIA S.L. C/ Bonaire 4 46389 Turis (Valencia) Spain Sale price

Demonstration unit with 7 operating hours, 3 phases, 50KVA, 230/400Volt! Soundproofed diesel generator set, ready for immediate use! Manufacturer: PLUS POWER Type GF2-50 - Electric Start Power 50kW 90A Generator Stamford UC224E/S1L2-Y1 3 Phase, 230/400V, 50A, 50Hz, 63KVA Engine Ricardo type N4105ZDS, 56kW , 1.500 rpm, 4 cyl, diesel Key Start Soundproofed Dimensions width approx. 225cm, depth approx. 94cm, height approx. 120cm, weight approx. 1,020kg. Ready to use, immediately available.

Metal band saw blade, band saw blade, metal saw band -Manufacturer: Wespa, metal saw band Bitec M42 Plus unused -Dimension: 2450x27x0.90 mm 4/6 -Number: 7x sheets available -Price: per piece -Weight: 0.5 kg/piece

Model TS 38 plus Circular Knife Machine Tabletop machine Stainless steel version, Knives newly sharpened and coated Manual operation Disc thickness adjustable from 3 - 20 mm Dimensions: 950 x 660 x 500 mm, WxDxH Bread dimensions max: 370 x 200 x 160 mm L x D x H DGUV V3 tested Connection 400V, 16A-CEE plug Used machine cleaned with 6 months warranty More bakery machines in stock!

Metal band saw blade, band saw blade, metal saw band -Manufacturer: Wespa Bitec Plus metal saw band unused -Dimension: 4250x34x1.10 mm 4/6 -Number: 5x sheets available -Price: per piece -Weight: 1.3 kg/piece

Metal band saw blade, band saw blade, metal saw band -Quality: unused, original packaging -Toothing: 3/4 K-POS -Price: per piece -Number: 6x sheets available -Dimensions: 3830x27x0.9 mm -Weight: 0.8 kg/piece