plc used for sale

Microstep - EuroCut-P 3001.15 Working range: 1500mm x 3000mm plasma source Kjellberg HiFocus 160i with automatic gascosole cutting up to 25mm quality cutting suction Donaldson MD2-PLC + DFPRO 4 SPRK with an additional EX protection. Refurbished in 2016 All maintenance or repairs were carried out exclusively by the manufacturers (MicroStep and Donaldson). The prescribed maintenance intervals have always been adhered to. All maintenance and repairs are extensively documented. commissioning on request

Overhauled: 2018 Year of construction: 1994-2000 Blade 560 mm Engine power 6.5 / 8,0 KW Speed 1500/3000 min-1 Cutting speed 2100-4200 m / min Saw height control: electronic Square maximum work area: 170 x 170 mm Flat maximum work area: 300 x 150 mm Work area round max.: 200 mm Saw speed 0-40 mm / s adjustable Section length 5-950 mm (~ 9999 mm multiple hub) Nachschubgeschw. maximum 300 mm / s Weight approx. 1900 kg Dimensions Lxwxh 2200mm x2700mm x1950mm The machine is both technically and optically after completed retrofit in mint condition. The machine is efficiently usable by their equipment and construction methods for a wide range of applications. The programmed HMI control system ensures easy and very profitable operation of the plant. The soundproof cabin this reduces the noise emissions to a minimum. The machine will be overhauled on request in our House. Amo ...

Microstep - EuroCut-P 3001.15 Work area: 1500 x 3000 mm Plasma source of Kjellberg HiFocus 160i with automatic Gaskosole Cut quality cutting up to 25 mm Extraction Donaldson MD2-PLC + DFPRO 4 which with additional EX-protection. Refurbished in 2016 All servicing or repairs were solely by the manufacturer (Company MicroStep and Donaldson). The prescribed maintenance intervals were always met. All maintenance and repairs are extensively documented. Commissioning on request

Refurbished: 2018 Year of construction: 1993-2000 PLC: Siemens S7 Blade 175-250 mm Power 1,5 KW Saw blade feed mm/min Cutting speed: 20-170 m / min (at option high speed spindle differierend) Workspace square Max: 60 mm Flat maximum work area: 40 x 80 mm Work area round: 2-70 mm Supply length 5-2000 mm Nachschubgeschw. 600 mm / sec (Saw) approximate weight: 1200 kg (Magazine), approx.: 600 kg Dimensions Lxwxh (saw) about: 3300 mm x 1000 mm x 2000mm (Magazine) about: 3900mm x 1500mm x 1300mm Footprint Lxw 4900 mm x 2000 mm The machine will be overhauled on request in our House. Among other things, following points are renewed: -Conversion to Siemens S7 -New electric components -New pneumatic lines -Ueberholte pneumatic components -New valve Terminal -Revision of the extraction -Minimum lubrication system overhaul -Replacing common wear parts -Overhaul of the lo ...

Overhauled: 2018 Year of construction: 1991-20167 Band saw blade 250-285 mm Motor output 5.5 KW Cutting speed 35-160 m / min Square maximum working range: 15-60 mm Round maximum working range: 15-70 mm Saw feed 2-100 mm / s adjustable Section length 5-250 mm Nachschubgeschw. Max. 1000 mm / s (Saw) approximate weight: 1500 kg (Magazine), approx.: 800 kg Dimensions Lxwxh (saw) approx.: 1100 x 1600mm x 2300mm (Magazine) about: 7500mm x 1400mm x 1600mm The machine is suitable due to their facilities and construction for mass editing of steel and is the predecessor of KASTOwa C7 or C9 KASTOspeed. The plant will be located after overhaul (retrofit) in like new condition, which is also guaranteed by our House. The machine will be overhauled on request in our House. Among other things, following points are renewed: -New PLC control Siemens S7 -Conversion to Siemens HMI - ...

Turbo systems Model: Heat sealer pot sealer stainless frame, currently set for 32 mini pots, 30mm diameter x 25mm depth, previously used for Knoss stock pots, adjustable temp controls, Mitsubishi Go T1000 PLC

Qty 1 x Berstorff 4 roll inverted L calender, serial number: 11892-907, original year 1966 (but upgraded/refurbished in 2012), Roll sizes: 850mm dia x 2440mm wide, peripherally drilled rolls (steam/high pressure hot water heating), motorised nip adjustment, cross axis, roll bending, hydraulic preload etc. 2 speed Unidrive gearbox on universal couplings, Speed setting 1: 33.7 rpm, speed setting 2: 16.85 rpm, with 98kW DC variable speed motor fitted to each roll. Operator controls renewed recently (Siemens S7 plc) Downstream equipment: Set of 5 x cooling drums Beta thickness measuring device Edge trimming unit Menzel length cutter 3 position winder Complete and in very good condition. 2 spare rolls.

Tube filling- and closing machine for pre capped ALU tubes. Machines is fitted with a tube loader TZ101, Laetus coding device and various accessories. PLC: Siemens type Simatic S5. Output: 80 tubes/min.

Overhaul year: 2018 Year of construction: 2000-2008 Saw blades Carbide / HSS: 315-360 mm Power saw motor: 15 KW Infinitely variable speed: 15 - 130 min-1 Cutting speed Blade (350 mm): 16.4-142.8 m / min Saw height control adjustable: electronic Bdgmy08nkg Square 90° maximum working range: 100 x 100 mm Work area round 90° max.: 110 mm Supply length 5-970 mm (~ 9999 mm multiple hub) Supply AC servo max speed: 300 mm / s Compressed air connection provided on site: 6 bar Approximate weight saw: 1800 kg Dimensions Lxwxh: 1900mm x 1250mm x 2100mm LxB floor space: 1900 mm x 1250 mm The machine is efficiently usable by their equipment and construction methods for a wide range of applications. The HMI interface to control the machine ensures a simple and trouble-free operation of the system. The machine is completed retrofit, both technically and visually in mint condition. A  ...

Manufacturer Elumatec type MGS 142 Overhaul year: 2019 Year of construction: 1995-2018 Blade Max carbide: 500 mm Power saw motor: 4 KW Speed saw motor: 2800 min-1 Cutting speed blade 500 mm: 4400 m / min Saw height control: continuously variable, electronically Workspace Vierkant90 ° Max: 130 x 130 mm flat workspace: 90° Max: 190 x 130 mm work area round: 90 ° Max: 150 mm pneumatic supply length: 5-560, 10-1120 mm Compressed air connection, by the customer 6 bar Gewicht(Säge)CA.: 800 kg Dimensions Lxwxh (saw) about: 2900mm x 1400mm x 1500mm footprint Lxw: 2900 mm x 1400 mm additional description Elumatec SA 142 4KW straight cutting retrofit Elumatec SA 142 4KW straight cutting retrofit Fully automatic saw machines for non-ferrous metal and plastic The machine is both technically and optically after completed retrofit in mint condition. The machine will be  ...

FRIGOSCANDIA GYROCOMPACT GC42-08-30-06-NS-CCR Product number:M19-5013 Cooling capacity:100 kW Number of fans:1 Fin spacing:25mm - 6mm mm Defrost:Hot gas Refrigerant:NH3 Refrigerant Content:390 kg Voltage:400 Volt Power consumption:25 kW Motor power:30 kW Dimensions:7050 x 2620 x 3900 mm Weight:6500 kg Year:1996 Number in stock:1 piece(s) Price:Quotation request A nice compact Frigoscandia spiral freezer. Model GC 42-08-30-06-NS-NHT-CCR with a product capacity of maximum 1.000 kg/h (based on green peas). In/outfeed configuration is North/South. Infeed height = 560mm, outfeed height = 2540mm. Belt rotation is Counter Clock Wise, belt width gross = 420mm, belt width net = 375mm, max product height = 65mm, numbers of tiers = 30 tiers. Belt mesh width = 6mm. This Frigoscandia spiral freezer has been well maintained and is in top condition. The freezer is executed with a S. ...

- Engine power 7.5kW / 32 amperes - Control PLC supported, with two-hand safety circuit - Cutting force 30to Cutting channel designed for: - max. roll length 1500mm - max. roll diameter 1200mm - Machine weight approx. 3000kg - Hand guard grille in the area of the control panel and opposite - Forklift riding shoes are used for easy and safe transport of the Machine by forklift - Spaltertisch straight version Colour blue Machine immediately available

Cam controlled multi spindle automatic lathe, used 6 main spindles, control: Siemens S5 PLC, electronical trip dog control type „Balluff gear box for thread milling (2 pieces) pick up for rear machining in pos. 6, work piece sorting shute, barloader: IEMCA-PRA 40/33 P -rack type- coolant pump, threading clutches, stock stand and reel, tooling: could be different like pictures partly revised

Overhaul year 2018 Year of construction 1995-2005 Saw blades Carbide / HSS 450 mm Power saw motor 5.5 KW Speed infinitely variable 10 - 60 min-1 Cutting speed Blade (450 mm) 15-75 m / min Saw height control infinitely adjustable electronic 5 Workspace square 90° Max: 140 x 140 mm Workspace flat 90° Max: 240 x 80 mm Work area around 90° Max: 150 mm Supply length 5-9999 mm Supply AC servo max speed: 500 mm / s (Saw) approximate weight: 2100 kg Dimensions Lxwxh (saw) about: 2500mm x 1300mm x 2100mm Footprint Lxw 2500 mm x 1300 mm The machine is efficiently usable by their equipment and construction methods for a wide range of applications. The HMI interface to control the machine ensures a simple and trouble-free operation of the system. Due to the construction of the sawing machine, it is possible to realize a very accurate length tolerances. The machine will be over ...

Saw blades Carbide / HSS: 450 mm Power: 4,0 / 5,5 KW Speed infinitely variable 10 - 60 min-1 Cutting speed (450 mm) blade: 7-43, or 15-75/min Saw height control adjustable full electronic Square 90° maximum working range: 140 x 140 mm 45° max.: Flat workspace: 90° Max: 240 x 80 mm 45° max: work area round: 90° Max: 150 mm 45° max: supplies length easy stroke: 5-2000 mm Multiple stroke: 5-9999 mm Supply AC servo max speed: 500 mm / s Approximate weight: 3600 kg Dimensions Lxwxh: 3500 mm x 1300 mm x 2100 mm Lxw surface: 3500 x 1300 mm? Technical description of 401 k PPS / PPS 451 NA 2000 retrofit 401 k PPS / PPS 451 retrofit high-speed sawing machine for steel. The machine is efficiently usable by their equipment and construction methods for a wide range of applications. The HMI interface to control the machine ensures a simple and trouble-free o ...

A mobile ultrafiltration system is sold in a 20ft container with equipment: - Ultrafiltration modules type dizzer CL (Inge GmbH) - Backwash template 2.6 m3 - Pre-filter 300 ?m - Measurements for turbidity, conductivity and pH - PLC type T-Box for fully automatic control of the system - Operation of the system on site via touch panel as well as remote access via based visualization - automatic chemical dosing Additional additional modules can be purchased as an option: - 20ft expansion container with 12 additional UF modules - 20ft container with sewage and neutralization tank

For the columns and crushing of wrapped paper, cardboard or plastic rollers on core. Engine power 7, 5kW 16Ampere control PLC supported with two-hand safety control - key-operated switch - emergency off pull cord - cutting force 30 to - speed ca. 17, 3 mm / sec - cutting Canal to process roles of maximum roll length approx. 1500 mm max roles dur diameter approx. 800mm - weight of the machine ca. 2900 kg - noise <80dB(A) - hydraulic pressure 200 bar - tank capacity 90Liter - hand guards machine available now Subject to prior sale Price and further details on request

BITZER / ALFA LAVAL L7SW1S12PP Product number:M19-4335 Cooling capacity:930 kW Refrigerant:NH3/R717 Refrigerant Content:80 kg Voltage:400 Volt Motor power:250 kW Dimensions:9.000x3.000x2.600 mm Weight:13.500 kg Year:2014 Number in stock:2 piece(s) Price:Quotation request Very nice and young Bitzer water-cooled ammonia water chiller(s) built in a machine-room container with mechanical cooling. This Bitzer chiller consists of a frequency controlled Bitzer screw compressor (brand Danfoss), WEG electric motor 250 kW, horizontal oil separator, oil cooler, combined economiser/liquid separator, Alfa Laval plate heat exchanger evaporator, Alfa Laval plate heat exchanger condenser, Grundfos speed controlled pumps and a control cabinet with Siemens PLC and touch screen. The above mentioned capacity is at +18/12°C in/out and a flow rate of 143,7 m3/h. and a cooling water supply +4 ...

QTY 1 x Pomini VIC1.8-PX1.6 Tandem Lab mixer, Machine number 9912, date 1990, Modern frame design with unitized fabricated steel base, Anti friction roller bearings with floor lubrication, 22kW DC variable speed motor. Rotor speeds 0-230rpm Torque montioring sensors. Siemens PLC control system with S7-300 CPU (combined with original S5). Desktop computer interface. Left hand mixer: Pomini PX1.6 tangential rotor type, Volume 1.6Litre, 2 wing rotors, FY type bronze dust seals, Jacketed chamber for heating or cooling, Hard Chrome plated chamber and rotors, Chamber sides can manually swing open for cleaning/maintenance (by removing 4 bolts on each side), Pneumatic oil injector, Pneumatically operated discharge drop door with linear actuator, Pneumatically operated hopper load door, Pneumatic ram with transducers fitted to monitor floating weight position. Proporti ...

with 60 rinsing stations, 80 filling valves and 14 head screw capper Capacity: 2.0 l dia 99.8 x H= 350.00 mm - capacity: 7,000 bph 1.0 l dia 81.37 x H= 276.17 mm - capacity: 14,000 bph 0.6 l dia 68.0 x H= 245.16 mm - capacity: 20,000 bph The filler and rinser will be completely dismantled. All gear wheels on the filler are brand new. So the main bearing will be renewed. The filling valves will be complete renewed into new generation neck holding filling valves. The product inlet pipe will be renewed. All types will be renewed. So the Alcoa screw capper will be complete dismantled and modified, with a pick in place system to handle 28mm plastic screw caps. The AVE rinser will also be complete dismantled and rebuild from the beginning. The filling valves of the filler are neck holding filling valves so the filler does not have lifting cylinders anymore. The complete bottle tra ...

Vecoplan injection moulding machine Type: VAZ 160/200 SLF Control: PLC Control built year: 2004 Dimensions and weights Dimensions LxBxH m: 3.5 x 3.75 x 2.34 Machine Weight kg: 19,000 Other Inlet length: 1600 mm inlet width: 2000 mm rotor diameter: 640 mm Double number cutting crowns 48 pieces (80 x 80 mm) rotor speed: 148 UpM screen diameter: 120 mm drive power: 250 kW operating voltage: 400 V frequency: 50 Hz throughput: When face, Precrushed and FE-free material for replacement fuel preparation > 12 t/h at heavy goods with a density of 120 kg/m ³ > 5 t/h at lightweight with a density of 80 kg/m ³ with product grain size < 150 mm more than 98% < 30 mm less than 5%.

new ! all stainless steel 2 speeds (20 and 40 rpm) 2 mixing directions inspection gantry safety lid CE-approved variable speed plc control overall dimensions (l x w x h) : 1.970 x 1.000 x 1.600 mm (open lid: H: 2.250 mm) Quick & Clean system Seals of mix axles easy and quickly disassembly and monolithic seals + Loader for eurobins

Machine name: BI Pack Manufacturer: OPEM Year of construction: 2006 max speed/power: 200 pads / minute Dimensions: approx. 2m x 2, 3m height: 2m Weight: 1000kg Power supply: 400 v & 50 Hz Compressed air consumption: 0,6MPa Detailed machine function: new double Schlachbeutelmaschineum to for example: coffee pods individually through print mark control in foil to pick. Each bag can be individually printed by the attached printer. 2 seperate treadmills incl. Counter is also available. PLC manufacturer/model: OMRON more info: new price â?¬120,000

Qty. 1 Second-hand cold rolling mill Mfc.: SUNDWIG/MINO Type: 4-HI Built: 1980 Revamped: 2016 Rolled material: Carbon steel SAE1006, S235-S550, C45-C75, IF Strip width max.: 600 mm Thickness: in 6.0 mm out 0.25 – 5.0 mm Speed max.: 500 m/min Coil size: ID 508 mm OD 2000 mm Back-up roll dia.: 590 mm - 625 mm Work roll dia.: 190 mm - 240 mm Motors stands: DC, EAA converters (installed 2004), Rolling force: 500 Tons Coolant Emulsion Filtration by magnetic system Controls PLC system: SIEMENS Scada: Simplicity Thickness control: Entry stand hydraulic equipped with Automatic Gap Control (AGC) Thickness control: Exit stand Utilities: Electrical voltage: 380 V, 3 Phase, 50 Hz Air pressure: 5 Bar Cooling water No. of work rolls: 120 used + 8 brand new No. of back-up rolls: 8 Electric Drawings Mechanical Drawings Certification: Allegato V/8 ...

Collette SM200 high speed bowl mixers 200L, stainless bowl and mixer attachment, brand new unitronics HMI + PLC controls

Feeder Double printing Crabtree Marquess UV oven Maber Coater Oven of 27 m and 6 m of coolers New PLC control for machine Chain and wickets new New exit table Inghor New transition system Non stop stacker LTG Sizes 1140 x 960 mm.

Manufacturer: ASEPTO GmbH Year of construction: Fully Refurbished2021/2022; overhauled with ne controls and PLC Capacity: up to 6000 l / h (for milk desserts) with APV Gaulin Homogenizer as a high-pressure pump, capacity: 7,000 l / h Complete documentation and controls available

Capacity: 120kg of green coffee per roast (480kg per hour) Roasting time: 12-15 minutes Voltage: 400V, 3 phase (other voltages by request) Pneumatic green coffee loader, destoner and cyclone included Optional afterburner Gas: natural gas/LPG Burner: Weishaupt (indirect) The roaster is currently disassembled and ready for refurbishing. It will be completely refurbished featuring: new insulation new bearings new direct drive motors with speed control on the destoner, drum and exhaust fan new pneumatics new electric cabinet and controls (optional: PLC and touchscreen with automatic roasting and profililng) new cooling bin sheathing new modulated Weishaupt burner (other makes by request) new paint (powder coating) Inspection of the roaster is possible at any time Photos of a Probat G60 coffee roaster after refurbishing are also included, as an example of how the G120 ...

Capacity: 120kg of green coffee per roast (480kg per hour) Roasting time: 12-15 minutes Voltage: 400V, 3 phase (other voltages by request) Pneumatic green coffee loader, destoner and cyclone included Optional afterburner Gas: natural gas/LPG Burner: Probat - direct The roaster is currently disassembled and ready for refurbishing. It will be completely refurbished featuring: new insulation new bearings new direct drive motors with speed control on the destoner, drum and exhaust fan new pneumatics new electric cabinet and controls (optional: PLC and touchscreen with automatic roasting and profililng) new cooling bin sheathing modulation of the burner will be installed new paint (powder coating) Inspection of the roaster is possible at any time. Photos of a Probat G60 coffee roaster after refurbishing are also included, as an example of how the G120 will look like.

MontagePRESSE with central lubrication, pneumat. Feed and PLC control. Documents More info on request

Mobile strech bander suitable for grouping + banding of folding boxes asn. Output: up to 40 bundles / min. PLC: Siemens S5.

Siemens PLC CPU rack 115U 943B 6ES5 943-7UB11 Power supply 6Es5 951-7LB21 CPU 115U 943B 6ES5 943-7UB11 CP 523 COMMUNICATION PROCESSOR 6ES5 523-3UA11

CAM automatic bundling wrapping machine G60 is a new concept machine, designed to carry out bundling and complete wrapping of parallelepiped shaped products, at very high speed, using heat-sealable plastic film and, upon request, Kraft paper. It maintains ample flexibility of employment, guaranteeing high performance and reliability. The completely automatic working cycle, requires the operator only for wrapping material reel change. This operation is quicker thanks to the rapid film replacement device. The second reel shaft is supplied standard with the machine. Pre-arranged for easy and rapid change-over, this machine is extremely versatile. All adjustment facilities have been arranged on the operator's side, while structural elements, which limit accessibility to the product handling, have been eliminated. The machine basement enables complete separation of product handling area  ...

-Engine power 7, 5kW -PLC based, two-hand safety control -Cutting force 50to -Splitting er table straight version -Cutting channel: -maximum blade length L = 3000mm -Max opening H = 850 mm -Machine weight approx. 3, 4to -Hand guards in the area of the control panel and to present -Stacker running shoes including (is used for easy transportation of the machine by forklift) Machine in stock and available at short notice Price and further details on request

Manufacturer: Pressta Eisele Type: 501 angle punch Overhaul year: 2020 Built in 2010 Saw blade carbide: 500 mm Drive power saw motor: 5.5 KW Speed Saw Motor: 2860 min-1 Cutting speed Saw blade: 4500 m/min Saw blade feed: infinitely adjustable 0-70 mm/s Tool area 90 max approx.: 20 x 250 mm Punching cylinder: 1 pcs vertical top diameter 100 mm ,1st st horizontal front diameter 100 mm Punching force power: 4.0 KW Pressure max. 280 bar Pressure in KN at 280 bar approx.: 210 KN Volume flow at 280 bar approx.: 6.8 L/ min Pressure in KN at 200 bar approx.: 150 KN Volume flow at 200 bar approx.: 9.5 L/ min Supply length pneumatic: single stroke max. 600 mm Servo controlled: single stroke max. 600 mm Multiple stroke max. 9999mm Replenishment. servo-controlled replenishment unit max. 500 mm/s Compressed air connection on the side: 6 bar Weight (s ...

-Engine power 7, 5kW -PLC based, two-hand safety control -Cutting force 50to -Splitting er table straight version -Cutting channel: -maximum blade length L = 3000mm -Max opening H = 1250 mm -Machine weight approx. 3, 9t -Hand guards in the area of the control panel and to present -Stacker running shoes including (is used for easy transportation of the machine by forklift) Machine in stock and available at short notice Price and further details on request

Flute laminating machine CA1300 Side register heel. The bottom feed stack can be adjusted for suction intensity from the touch screen, including an automatic cleaning system. The input pile has a non-stop system Monitoring by PLC with alarm in case of power supply error. Automatic gluing system that regulates not only the flow but also the recirculation. Features: · Max sheet size: 1300 X 1250 mm · Min sheet size: 400 X 400 mm · Thickness of the upper sheet: 175-600gsm / 145 - 450gsm Kraft · Bottom sheet thickness: Four-ply corrugated paper: A/B/C/E/F - Grey cardboard · Max speed: 7000 sheets per hour · Gluing accuracy: ± 1 mm · Weight: 5000 kg · Dimensions: 11500 X 2000 X 2400 mm · Electric power: 10 Kw / 380V

Surface grinders - horizontal ELB-SCHLIFF SWBE 10 PLC Second-hand machine Mint Control cabinet, motors, wiring, control new Hydraulic new, trim, loop length: 1000 mm Grinding width: 500 (600) mm Workpiece height: 600 mm Table size: 1000 x 550 mm Grinding wheel dimensions: 400 x 100 mm Grinding spindle motor: 11 kW Table speed: 2-30 m / min Grinding wheel speed: 5-35 m / sn Total power: 18 kW Machine weight approx.: 5,5 t Space requirement approx.: 3.5 x 2.5 x 2.5 m General outrun 2019 with 12 month warranty Paper machine Levelling feet Installation included Instruction includes

Qty 1 x HF/Pomini VIC95X (IM110VIC), Hydraulic hopper (IM90-E type), Refurbished complete chamber and hopper installed new in August 2016, Machine number: 487, year of rebuilding 2014, CE marked, Chamber volume approx: 104Litre, Useful volume at 0.75FF: 78Litre, Batch weight at SG 1.15: 90kg, Hydraulic dust seals (PYH Type), Hydraulic drop door with linear actuator and toggle latch, Rotor geometry adjusted by 2 x 2.2kw, 1420rpm motors, Unidrive gearbox, Ratio 20.6:1, With Ansaldo 352KW, 1030/1230rpm, 875Amp, 440V water cooled DC variable speed motor. Siemens S7 PLC control system (cpu 315-2DP, step 7). Complete and in very good working condition. All manuals and documentation available. Used spare chamber parts available/included:- Qty 1 set (2pc) used rotors Qty 2 sets (4pc) used drilled sides Qty 2pc used door tops Qty 1pc used weight The mixer has now been r ...

Bartell FSW-409 7/8in bead winding machine suitable for PCR tyres 12in to 20in consisting of: - 12 station bead wire let of unit. - Prodicon zig zag cutter Type Z/Z year 1988 (takes sheet compound max 750mm wide and cuts to suitable size for feeding extruder. - 60mm dia coldfeed extruder, L/D ratio 13:1, with 18.4kw DC variable speed motor and 3 x TCU's - Festoon section - Former unit with various Bartell formers available/included. - Siemens S5 plc controls.

Die Cutting Machine Unitec T1060 Die Cutting Machine Unitec T1060 The T1060 automatic machine with or whithout stripping is used to diecutting and creasing paper, cardboard and corrugated and operations for cardboard boxes, paper labels and especially for delicate printing jobs such as cigarette packages, wine, gifts and cosmetics, etc. This machine works automatically throughout its process, with a user-friendly interface to control the cutting speed, number of sheets cut, total operating hours and its working status, as well as to dynamically control the PLC inputs and outputs, and malfunctions to facilitate operation control and troubleshooting. In addition, the machine also features self-testing (e.g., double sheets, missing sheets, accumulated sheets, or fallen sheet detection) and continuous process sampling, while providing you with a solid cutting and accuracy registr ...

CHEESE PORTION CUTTING MACHINE SLICING MACHINE AGED CHEESES GOUDA, EDAM, MIMOLETTE, CHEDDAR AND MANY KINDS WITH PLC CONTROL AND HMI OPERATOR PANEL COMPLETE STAINLESS STEEL THICKNESS IS ADJUSTABLE

Pop Glace (Frozen pop) pleine entière fabrique des batons of glace. Usine d'Occasion entière pour liquide le entièrement rénové. Chaque machine avec 4 ou 5 ou 6 voies jusqu' à l'exigence du client. Piece mécanique rénovée. Partie entièrement rénovée avec électrique the plupart des composants PANASONIC, PLC, écran tactile, photocellule électrique pour Spot. The peut être variable length juste sur l' écran tactile. L'usine est compoused avec 3 machines pour production: 15,000 PCs par heure pour une longueur autour de 280 mm. Nous pouvons également fournir les réservoirs de mélange et aussi le système pour ajouter the couleur et saveur dans chaque pop de glace (moins d'investissement). Les photos sont pour une machine similaire entièrement rénovée. Nous pouvons également vous conseiller sur le film.

COMPACTOR ROTATIV PENTRU CARTON, PLASTIC SI LAZI SAU CUTII DE CARTON Valpak ROTARY COMPACTOR FOR CARDBOARD, PLASTIC AND BOXES OR CARDBOARDS Valpak Brand/Marca TECHVAL Type/Model// Tip/Model VALPAK Putere/Power 4 kW Year of manufacture/an fabricatie 2003 Acustic pressure/nivel de zgomot 59 db (A) Supply voltage/alimentare 380 V triple phase Protection/protectie 16A curve D Sizes/Dimensiuni in cm Coil Weight – Al fins 140x210x280 cm (LxWxH) 1200 kg Amount in stock/pe stoc 1 pc/buc 1 sac rotund de deseu maruntit = 36 baxuri de carton necompactat 1 round bag of shredded waste = 36 containers of uncompressed cardboard 1 sac rotund de carton va avea 300/400 kg, de ladite 300 kg, plastic 200/300 kg 1 round cardboard bag will have 300/400 kg, of said boxes300 kg, plastic 200/300 kg Echipamentul standard are: Celulă fotoelectrică, sistem de debavurare automat, senzor op ...

1 KUSTERS 2-bowl rolling calender type 212.70-3200, 3200 mm Working Width (3400 mm face roller width), year 1993, top bowl chromed steel (thermal oil heated) diameter 450 mm, bottom bowl Racolan (S-roll) diameter 500 mm, Pressure 300 Newton/mm = 96 tons, maximum speed 100 m/min., maximum heating temperature 250 ºC, entry with metal detector, ELECTROTEX seam detector with automatic seam passage, exit by A-frame contact winder max. 1800 mm diameter, blower for cooling the bottom roller, water cooling system for edge of racolan sleeve, cooling rollers before exit, machine is controlled through SIEMES PLC, electronic speed control through MENTOR II digital drive, voltage 380V, 50 Hz, machine supplied with spare racolan sleeve and technical documentation

Vacuum stainless steel planetary mixer mixer mixer mixer mixer used, as good as new condition State. As good as new Gross volume: 140 litres Attachment (batch) size: 35 to 100 litres max. 200 kg Max pressure: Vacuum 10mbar absolute up to 1200mbar absolute Process pressure range up to max 200 mbar Max operating temperature: 80°C Mixing tool: 7.5 kW Stirring head speed: 3-40 rpm Mixing tool speed: 10-120 rpm Total connection power: 25 kW Operating voltage: 3x 400 V / 50 Hz Control voltage: 230 V / 50 Hz or 24 V DC Siemens PLC Visualisation Filling nozzle slated with pneumatically spun rotary flaps Filling snail Frequez controlled motors Level sensors hydraulic excavation with Siemens Symatic Multi Panel Touch / Siemens Simatic controller / Siemens frequency inverter with 2x mobile cylindrical exchangeable container (140 L ) with cooling jacket (20 L) made of stain ...

Neri BLB 400 V2T self-adhesive labeller for applying labels to the top and underside of cartons with 2 label dispensers. Carton size range: min. 20 x 15 x 70 mm, max. 180 x 120 x 200 mm. Label roll diameter max 400 mm, label roll core 40 mm. Siemens SIMATIC S7-300 PLC controller with Siemens Touch Panel Electrics 400 V/ 50 Hz, max. draw 4 KW, compressed air 6 bar Infeed height 820 bis 950 mm Machine dimensions approx. 2500 x 2000 x 2250 mm (LxWxH), weight approx. 1000 Kg, Output up to 200 cartons per minute (2 machines available)

Qty. 1 Second-hand blower and PET filling line Mfc.: SIG (Germany), KHS (Germany), Robopack (Italy) Built: 2006 / 2007 Stopped: 10 / 2020 Product: Beer Cap type: PCO 1881 Technical Data 1. Blowing machine Mfct.: SIG Type: Blomax 6 Year: 2007 Cap Type: PCO 1881 PLC type: ABB controller Consisting of: Blowing machine pre-form feeder (without tipper) chiller (Mfct.: Riedel, 2007) Capacity: at 2 litres: 8,400 bottles / h at 1.5 litres: 10,500 bottles / h at 1 litre: 10,500 bottles / h 2. Filler Mfct.: KHS Type: INNOFIL EM/125/R/PET 54 / 9 / Rinser 36W Year: 2007 Total working hours: 90,000 Product: Beer Cap type: PCO 1881 Consisting of: Rinser, Filler, Capper (incl. cap feeding system) Cap feeding system: Mfct.: Hormes, Year: 2007 3. Cleaning system / CIP station Mfct: KHS Type: Innopro – CIP Year: 2007 Consisting of: Stainless steel tan ...

Qty. 1 Second-hand cold rolling mill Mfc.: MCC, ABB, IMS Type: 6-Hi Cold Rolling Mill Built: 2009 Stopped: 2017 Annual capacity: 220,000 Ton/Year Annual running time (Hour): 6480 Strip Width: 800~1250 mm Thickness Entry: 1.5~3.5 mm Exit: 0.2 – 1.2 mm De-Coiler OD: 1000~2000 mm De-Coil ID: 610 mm De-Coil Weight: Max. 25 T Coil OD: 1000~2000 mm Coil ID: 610 mm Coil Weight: Max. 25 T Mill Max Speed: 1300 m/min Threading Speed: 30 m/min Main Drive Controller (3300 VAC) Mfc.: ABB ACS6000 Variable Speed Variable Voltage Xray Gauge Mfc.: IMS Germany Automation Siemens PLC/Wincc

Powder coating plant for large parts "Kigo O.E." Example: (all large foods can be changeable individually) Space requirement: 30 x 15 meters Part size: L= 6.200mm B= 2.300mm H= 2,000mm Cleaning cabin walkable incl. sprueh wreath automatically 1 dimensions of the cabin Load length 9,000 mm Width 4,500 mm Height 3,400 mm 2 dimensions of tanks Load length 1,200 mm Width 850 mm Maximum 1,000 mm 2 dimensions of the cabin Completely Load 9.140 mm including tanks width 5,580 mm Height 4,200 mm Coating cabin walkable, manual coating 1 Dimensions Cabin Length 9,000 mm Width 4,500 mm Height 3,400 mm 2 Dimensions cabin including suction Load length 10.125 mm Width 4,500 mm Height 3,400 mm Powder incineration furnace 1 inner dimension length 6,500 mm 2 Inner dimensions width 2,500 mm 3 Inner height height 2,950 mm 4 Outer dimensions incl. therm ...