plc with touch used for sale

BIOMERIEUX TEMPO READER + FILLER PLC TEMPO is an automated platform for the analysis of quality indicators. TEMPO READER TEMPO FILLER With accessories: 2 Intel Core I3 computers + screens + keyboards 3 barcode scanners (2 Xenon 1900 + 1 Voyager 1250g). Software Cables Numerous white plastic supports Untested equipment

Cat. No. 12-1080 in very good condition Measurements and Weight: LxWxH: 820 x 34 x 90 cm Weight: 38 kg For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Oil mist separator complete device Air output 1100 m3/h Flow temperature 5-45 C° Engine 1.45 kW-230/400V 50 Hz

fat baking plant Delivery time: 2 weeks Cart/Trolley: 1 loader/Kipptrögel: 10 Total length without storage: 1280 mm Total height: 1075 mm Total width: 820 mm Total length with tray: 2350 mm Total weight: 220 kg Volt / heart: 3 x 400 V / 50 Hz Power supply: 8.6 Capacity: 60 PCs Oil capacity: 67 ltr. Capacity of the trolley: 600 PCs. depending on the weight Operating instructions: german Description Digital display for the oil heater digital display for the fermentation Chamber button for lifting the basket button for lowering the basket

MJ UNI-MIS 037-000 Scope of delivery of the CT Scan Unit: Separation of the CT control room from the CT examination room by lead glass pane Patient access corridor Separate air conditioning in the CT room, control room and corridor Hygiene concept All 3 areas have their own ventilation (CT room, control room and corridor). The control room (seat of the MTRA for CT operation) is ventilated from the outside. The air in the control room has overpressure and escapes into the corridor. The CT room has its own ventilation from the outside, air escapes back to the outside, and the air flow is in balance. The corridor also has its own ventilation. Door widths 90 cm. A step to enter the container. Technical questions from the customer: Where is the exact exit and entry point for the network and electrical equipment at the container? Container door (short container side)  ...

Table drilling machine Ixion without base from a training workshop Type BT15STP stepless speed control via PIV gearbox Hoehen adjustment via rack, Speeds from 200rpm to 3,600rpm Flott Alzmetall Maxion Gillardon Special price

Nominal rating 1000 kg/h Motor rating 0,37 (0,5) kW (PS) Connected load 230V 50Hz (single-phase) Electrical protection 16 A Length 2500 mm Width 700 mm Height 2100 mm Discharge height 800 mm Weight 150 kg Material 1.4301 / AISI 304 Connection for cleaning ½\" inside Connection for washing vessel 1½\" outside Height fruit outlet 1750 mm ; new machine - top condition

For sale: Workshop crane KR-F50H without ballast filling Specifications: Manufacturer: Meiller (DE)· Metrics: Chassis width 810 mm Chassis length 1330 mm Overall height 1740 mm Chassis width: 810 mm Chassis length: 1330 mm Height/ Boom: - Height of hook boom extended: 3200 mm - Height of hook boom inserted 2400 mm Other: - Wheel Ø 200 mm Polyamide tyres -Load capacity: 500 kg -Load capacity at boom radius kg/mm: 500/830 435/980 370/1130 330/1280 300/1430 275/1580 250/1730 Equipment: 1x Hydraulic hand pump with hand lever and finely adjustable drain valve Chassis securing by foot brake RAL 2000 lacquer (orange-yellow) With minor rear-end collision damage or transport damage. Otherwise like new, never used! NP:4628 Euro

Hydrovar + motor without pump, HV3.3 f/120c + LM100RBM14/330, Lowara, used Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Used! - comes from a spare parts warehouse of a certified production facility, Ensuring the function: In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the buyer, the goods can be returned within 2 weeks. We will refund the buyer maximum the product price paid to us. For these goods we have to exclude warranty claims of the buyer for improvement, exchange, subsequent delivery or also for updating in case of digital components. Also excluded is the liability for direct and indirect consequential damages. Our terms and conditions apply, see our website. Austrian law app ...

Cloth Puller Oven Schiesser Pull-off Cup NEW 160/180cm Stove Depth -Aluminium cloth pull-off board furnace slider NEW -with undercoat -for 160 / 180cm depth -Pullers are 194cm long -with stainless steel trolley on 4 swivel castors -External dimensions of the carriage: 206x61cm and 182cm high

Pullers Cross Extractors Furnace Shooter 160cm - Cross cloth pullers - We have 3 pieces in stock - For settling bread and rolls - Made of stainless steel - On wheels Dimensions stainless steel trolley : W: 176cm D: 72 H:186cm Puller dimensions: : W: 162cm D: 61.5cm For details see pictures

approx. 3.000 pieces, Rotho crates 40x30x22cm with lid and 60x40x30cm without lid - used - : Price for the entire lot from location: 5.500.-€ (net)! Complete sale only! small with lid Size without lid Manufacturer Rotho Rotho Year of construction - - Type - - Dimensions 40 x 30 x 22 cm 60 x 40 x 30 cm Internal dimensions 36 x 26 x 21 cm 56 x 35.5 x 30 cm Qty 2000 pcs. 1000 pcs. Quantity per pallet 64 pcs. 20-24 hrs. Condition The condition of the container may vary. There may be signs of wear, such as scuffed corners. The inside should be clean as they are from production. The outer surface partly has adhesive residues from labels. Available: immediately Location: 79677 Schönau, Germany • small containers with lids (dimensions: 40 x 30 x 22 cm); Quantity approx. 2,000 pcs.

Spiral casing circulation pump without motor, water pump, centrifugal pump, chemical pump KSB HPK-LS 080-200 year 2011 Q: 56.5 m3/h H: 11.9 m n: 1440 rpm New ! Dimensions: 640 x 380 x 450 mm

Welding table, straightening table, straightening plate, work table, clamping table straightening plate PAGUS 1000 x 800 mm without feet Dimensions: 1000 x 800 x 250 mm

Centrifugal pump without motor, water pump chemical pump KSB ETABLOC GN 50-125/322 EX year 2001 Q: 60 m3/h Q: 60 m3/hbr /br / H: 13 m n: 2880 rpm Hollow shaft diameter: Ø 28 mm Intake: NW 65 Output: NW 50 New !' Dimensions: 460 x 530 x 410 mm

Centrifugal pump without motor, chemical standard pumps with shaft sealing, water pump DICKOW PUMPEN NCLs65/200 year 1992 Q: 30 m3/h H: 12 m n: 1450 rpm impeller diameter: Ø 200 mm Shaft diameter: Ø 32 mm New ! Dimensions: 600 x 360 x 460 mm

Shooting trolley with 9 apartments LxWxH: 200x60x185 with new cloths

Displacement pump without motor, rotary piston pump, food pump, chemical pump FRISTAM PUMPS FKL 75 FKLS 75 Qmax: 21 m3/h Pmax. : 35 bar Nmax.: 600 rpm DN65 Stainless steel pump ! used ! Dimensions: 720 x 540 x 570 mm

Hydraulic Press, Oil Hydraulic Press, Pressing Machine -Manufacturer: Novopress, Hydraulic unit for press machine -Pressure: max. 150 bar -Type: unfortunately no type designation -Accessories: see photos -Total dimensions: 410/310/H440 mm -Weight: 19.1 kg

Delta Drill with Internal Cooling SANDVIK TM411.5-207630 without Delta Ground diameter: Ø 15.25 mm 420279016 holder: Ø 32 mm K20 used, tested ! Dimensions: 185 x 32 x 32 mm

Intake pipe: 180 mm Voltage: 230 V, 50 Hz Filter area: 6.0 m² Flow rate: 1000 m³/h Total power requirement: 0.3 kw Machine weight approx.:78 kg Dimensions L-W-H: 400x600x700 mm Electrostatic separator: Filter chamber L: 360 x W: 510 x H: 500mm 3 trays with: - Pre-filter (knitted stainless steel) 500x370x20mm -Ionizer/Collector Cell 500x370x210mm -Post-filter (knitted stainless steel) 500x370x20mm

CNC Univ. Tool Grinding Machine SCHÜTTE Type BU 400 CNC 4Machine - Defect - without ControlMachine not ready for operation - electric without function - without CNC controlFabr. No: 03-02 Year of manufacture 19904 axes (X, Y, Z and R)Table clamping surface 1300 x 250 mmCenter width 700 mmCenter height 155 mmGrinding length (X-axis) max. 400 mmGrinding width (Y-axis) max. 260 mmGrinding spindle speed max. 6000 rpm. Grinding spindle drive 3 kWNet connection 380 Volt, 50 Hz, 25 Amp.- CNC control

Hydr. Flat-form scissor lift table FLEXLIFT FLUNDER type 1500 / 100 (without hydraulic unit)Year of construction 1991Nominal load capacity 1500 kgLifting capacity (practically tested) 1000 kg (at approx. 350 bar)Platform size 2100 x 1400 mmStroke max. 930 mmOverall height - bottom 100 mm (with mounting frame)Overall height - top 1030 mmHydr. Operating pressure 350 bar = lifting capacity 1000 kgHydraulic engine power 1.5 kWNerg connection 400 volts, 50 Hz- mechanical-hydraulic safety limit switches stop the lowering process when the safety strip is operated -

Electric motors without gearbox (low-speed motors) ideal for generating electricity for hydropower or wind power Data sheets are available! Please contact us

Screen chute without drive for sandblasting systems, FUF, Vibra Technik, mint condition -60% Special price If you have a VAT number, we will gladly issue you an invoice without VAT. As good as new! The part was purchased from a company's spare parts warehouse, has only minor signs of storage, has never been used and is completely new. - Vibra sieve chute without drive with MW5 sieve insert and GP5 silent block - 1150 x 600 mm approx. 100 kg A sieve chute is a component used in sandblasting systems to sieve blasting media. It separates larger particles from the finer grain size before the blasting media is reused and is part of the recovery system, where blasting media is collected, sieved and returned to the cycle after blasting. 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the ...

SMU Unit without batteriepack, 3HAC14757-1/01, ABB, used-function assurance Please note: This is an original product and not a replica from... Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Used! - comes from a spare parts warehouse of a certified production facility, - had been in storage for quite some time, - is in very good condition and fully functional, Ensuring the function: In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the buyer, the goods can be returned within 2 weeks. We will refund the buyer maximum the product price paid to us. For these goods we have to exclude warranty claims of the buyer for improvement, exchange, subsequent delivery or also for updating in case  ...

Cross Cloth Puller Stove Shooter Puller Daub Heuft - Cross cloth squeegee for deck ovens - 10 pullers on a trolley - Trolley is completely made of stainless steel - 3 trolleys in stock Immediately available More information and pictures on request. Shipping and trade-in on request.

Unit without battery pack, 3HAC8365-1/01, ABB, used-function assurance Please note: This is an original product and not a replica from... Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Used! - comes from a spare parts warehouse of a certified production facility, - had been in storage for quite some time, - is in very good condition and fully functional, Ensuring the function: In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the buyer, the goods can be returned within 2 weeks. We will refund the buyer maximum the product price paid to us. For these goods we have to exclude warranty claims of the buyer for improvement, exchange, subsequent delivery or also for updating in case of di ...

Features: Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packed Material: Steel Length of the elements: approx. 2000 mm, approx. 2500 mm, approx. 3000 mm Total length: approx. 470 meters Total width: approx. 530 mm Conveyor width/roller width: approx. 495 mm/ approx. 505 mm Conveying height including feet: approx. 250 to 290 mm Roll cross-section: approx. 80 mm Wheelbase: approx. 200 mm Color: Green & Gray Frame height: approx. 80 mm Frame thickness: approx. 05 mm Drive Type: Gravity Available now approx. 470 meters in stock Price per meter Internal Article Number: 2026020502 Thanks to the excellent workmanship of the roller conveyor, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics We are your competent partner for roller conveyor ...

1 Geiger LR 16 removal robot Year of manufacture 2004 Travels: x=500 y=1000 z=2600 mm + 2 Geiger MidiLiner 3.0 removal robots Year of construction 2016 Travels: X-axis: 300 mm, Y-axis: 800 mm, Z-axis: 1300 mm The removal robots are in good condition, and immediately available!

JGS 616 GS-N.L

Auction-ID: A1-45406-38

For sale I offer a Tractel grab hoist T516D. The grab hoist is an unused exhibit with slight traces of storage, which can be seen in the pictures. The grab hoist is sold with a new UVV test. Ropes can be offered on request Dates: - The T 516 D grab hoist is a powerful hand rope hoist for pulling, lifting, lowering, tensioning and securing loads - Load capacity 1600kg - Length, height, depth without hook 523x315x127mm - Rope diameter 11.5mm - Weight 13.5kg without rope Shipping available for an extra charge. Grab hoist is workshop-tested and immediately ready for use. Supplied with lever tube, without reel and without rope # Grab hoist # Lever hoist # Multi-purpose hoist # Tractel # T516 # T500 series # 1600kg # 1.6to

Side channel compressor, side channel blower, ring blower, vacuum pump, blower -Manufacturer: FPZ effepizeta, side channel blower side channel compressor -Type: SCL 70 SH -Drive shaft: Ø 35 x 90 mm -Bolt circle: Ø 160 x 10 mm -Drive motor: can be supplied at an additional cost -Dimensions total: 545/520/H565 mm -Weight: 37 kg

For sale I offer a Tractel grab hoist T532D. The grab hoist is an unused exhibit with slight traces of storage, which can be seen in the pictures. The grab hoist is sold with a new UVV test. Ropes can be offered on request. Dates: - The T 532 D grab hoist is a powerful hand rope hoist for pulling, lifting, lowering, tensioning and securing loads. - Load capacity 3200kg - Length, height, depth without hook 620x355x130mm - Rope diameter 16.3mm - Weight 24kg without rope Shipping available for an extra charge. Grab hoist is workshop-tested and immediately ready for use. Supplied with lever tube, without reel and without rope. # Grab hoist # Lever hoist # Multi-purpose hoist # Tractel # T532 # T500 series # 3200kg # 3,2to

Thread cutting machine, pipe thread cutter -Manufacturer: Rothenberger, Thread cutting machine type Supertronic 2SE without thread cutting head -Pipe size: 1/2 to 2 inches -Spindle bore: Ø 68 mm -Operating voltage: 230 volts -Speed: 40 rpm -Foot switch: with emergency stop function -Equipment: Pipe cutter, internal deburrer -Dimensions: 500/480/H370 mm -Weight: 46.6 kg

Heavy-duty shelf consisting of: 3 uprights approx. 1100x3300mm, 10 trusses approx. 3600mm, incl. pallet holders, with contents Auction-ID: A7-45254-408

Heavy-duty shelf consisting of: 3 uprights approx. 1100x3300mm, 10 trusses approx. 3600mm, incl. pallet holders, with contents Auction-ID: A7-45254-414

4 shelves Auction-ID: A1-45239-2141

Without content Auction-ID: A1-45239-2135

15 shelves Auction-ID: A1-45239-2155

Heavy-duty shelf consisting of: 7 uprights approx. 1100x3300mm, 6 trusses approx. 1790mm, 36 trusses approx. 3600mm, incl. pallet holders, with contents Auction-ID: A7-45254-455

Heavy-duty shelf consisting of: 3 stands approx. 1100x3300mm, 8 trusses approx. 3600mm, incl. pallet holders, with contents Auction-ID: A7-45254-415

Heavy-duty shelf consisting of: 4 uprights approx. 1140x2900mm, 14 trusses approx. 4000mm, incl. pallet holders, with contents Auction-ID: A7-45254-417

Cantilever shelf consisting of: 3 stands, stand height approx. 2600mm, arm length approx. 600mm, 9 levels, without content Auction-ID: A7-45254-396

Without a hard drive! Auction-ID: A1-45411-583

Heavy-duty shelf consisting of: 4 uprights approx. 1140x2900mm, 14 trusses approx. 4000mm, incl. pallet holders, with contents Auction-ID: A7-45254-416