platen used for sale

Clamping plate, marking plate, measuring plate, measuring table, welding table, welding table, straightening plate, marking plate, straightening table -Clamping plate: Directional plate with support ribs, solid version with base frame -Clamping surface: 1000 x 1000 mm -Table height: 970 mm -Transport dimensions: 1020/1010/H970 mm -Weight: 426 kg

Clamping plate, marking plate, measuring plate, measuring table, straightening plate, marking plate, test plate, control plate, granite measuring plate, hard stone measuring plate, granite measuring plate -Manufacturer: Oelze, granite measuring plate, hard stone measuring plate -Size: 600x400x80mm -Weight: 61 kg

Heidelberg Crucible - platen 1965 with rollers for printing and die-cutting immed. from our stock Germany condition runnig in excellent

A4 Platen with Hot Foil Stamping System

A4 Platen with Hot Foil Stamping System

A4 Platen with Hot Foil Stamping System

clamping force: 500 kN injection volume: -- cm³ screw diameter: 25 mm platen size: 400 x 400 mm Condition: used, Specification: horizontal injection molding machine, - used injection unit: - Screw diameter: 25 mm - shot volume max.: -- cm³ - injection pressure approx.: 1290 bar - heating zones: 4 - Heating power: 4 kW clamping unit: - clamping force: 500 kN - opening stroke max.: 325 mm - platen distance max.: 550 mm - clamping platen size approx.: 400 x 400 mm - tie bar distance: 270 x 270 mm - pump motor: 15 kW - total power: 19 kW - operating voltage: 380V, 50Hz - Weight approx.: 1.870 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General SKU237T272 LocationBarneveld MakeStrassBurger Filter TypeSF600 ODEC/200 No.020001701708 Year of construction2008 Pressure Working pressure6 Bar Main Features MaterialStainless steel Pressure6 Bar Surface35.81 m2 Specified Features - Filterpress Filter presscheck Filter surface35,81 m2 Stainless steel platescheck Number of platens59 Number of frames62 Internal platen sizes555x555 mm (420mm) External platen sizes615x615 mm Platen thickness11 mm Frame thickness38 mm (2x), 25 mm (60x) Cake capacity455 Ltr. Connectionsdia. 38 mm (4x) Hydraulic closingcheck With hydraulic unitcheck Manual operated closingcheck Manual openingcheck MaterialMild steel, Stainless steel Information With switchcheck Weight3000 kg CEcheck Floorspace5x1,4 m Total height1,4 m Extra Specificationswith hydraulic unitFilterpressesStrassBurger Filter GmbHFilters > FilterpressesB ...

General SKU279U504 LocationBarneveld MakeUnknown ( un readenle) TypeF40/40 No.M-1771 Year of construction1968 Main Features MaterialStainless steel Surface3.5 m2 Specified Features - Filterpress Filter presscheck Filter surface± 3,5m² Stainless steel platescheck Recessed chamber plates25 Number of platens27 Internal platen sizes370x370mm External platen sizes395x395 Platen thickness11mm Frame thickness8mm Cake capacity±29Ltr. ConnectionsDia25mm With outlets on platenscheck Mechanical closingcheck Manual operated closingcheck Manual openingcheck With feeding pompcheck Maag pump systems, type: cinox CX 28/28, year 2010 Motor0,25kW. 230/400Volt, 1350rpm MaterialStainless steel 1.4401 (316) Information Total height1,5m Weight320kg Floorspace1,6x1,25mFilterpresses-Filters > FilterpressesBrand > - What you can expect from Foeth: -- Machine is in working cond ...

General SKU426S1057 LocationBarneveld MakeNetzsch Type021 No.040001832 Year of construction2001 Pressure Working pressure15 Bar Main Features MaterialPolypropylene Pressure15 Bar Surface8 m2 Specified Features - Filterpress Filter presscheck Filter surface8 m² Number of platens32 Number of frames2 Internal platen sizes370x370 mm External platen sizes470x470 mm Platen thickness41 mm Frame thickness14 mm Cake capacity112 Ltr. Central inlet40 mm With outlets on platenscheck With hand valvescheck Hydraulic closingcheck With hydraulic unitcheck (hand press) Manual operated closingcheck Manual openingcheck MaterialPolypropylene Information With switchcheck Weight1080 kg Floorspace2,6x1,1 m Total height1,7 mFilterpressesNetzschFilters > FilterpressesBrand > Netzsch What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compa ...

General SKU354T992 LocationBarneveld Makeunknown Year of constructionunknown Pressure Working pressure3 Bar Main Features MaterialPolypropylene Pressure3 Bar Surface1.8 m2 Specified Features - Filterpress Filter presscheck Filter surface1,8m² Recessed chamber plates4 mm Number of platens10 Number of frames28 Internal platen sizes315x315 mm External platen sizes400x400 mm Platen thickness25 Frame thickness4mm With membranes on platenscheck Cake capacityvarriable because of additional frames Central inlet25 mm Connections25 mm Hydraulic closingcheck With hydraulic unitcheck manual Manual operated closingcheck MaterialPolypropylene Information Mounted on wheelscheck Floorspace2,15x0,9 m Total height1,5 m Weight680 kgFilterpressesSeitz - WerkeFilters > FilterpressesBrand > Seitz - Werke What you can expect from Foeth: -- Machine is in working condition -- A ...

General SKU416T1313 LocationBarneveld MakeFaure Equipments TypeFILTRE PRESSE TITAN 218 Mixed Pack Full Auto No.73 Year of construction2013 Pressure Working pressure5 Bar Main Features MaterialPolypropylene Pressure8 Bar Surface52.92 m2 Specified Features - Filterpress Filter presscheck Filter surface50 m² Recessed chamber platescheck Number of platens52 Internal platen sizes770x770 mm External platen sizes1000x1000 mm Platen thickness91mm (x26), 57 mm (x26) Frame thickness5,44 mm With membranes on platenscheck Cake capacity1100 Ltr. Central inletcheck ConnectionsDN80 (2x), DN25 (2x) With outlets on platenscheck Hydraulic closingcheck With hydraulic unitcheck Motor5,5 kW MaterialPolypropylene Information Floorspace7,8x2,2 m Total height3,2 m Weight10000 kgFilterpressesFaureFilters > FilterpressesBrand > Faure What you can expect from Foeth: -- Machine i ...

General SKU212T470 LocationBarneveld MakeDidier Filtertechnik GMBH TypeMSF 600/F No.HW-16657 Year of construction2003 Pressure Working pressure6 Bar Main Features MaterialStainless steel Pressure6 Bar Vacuumcheck Surface3.1 m2 Specified Features - Horizontal plate filter Filter surface3,1 m² Horizontal plate filters Filter presscheck Filter surface3,1 m² Stainless steel platescheck Number of platens12 Internal platen sizesDia: 564 mm External platen sizesDia: 604 mm Platen thickness48 mm Frame thickness38 mm Cake capacity112 Ltr. Central inletcheck ConnectionsDN 25 (2x) With outlets on platenscheck With hand valvescheck Hydraulic closingcheck With hydraulic unitcheck manual Mechanical closingcheck MaterialStainless steel 1.4571 (316Ti) Information Mounted on wheelscheck Total height2,4m Weight1000 kg CEcheck Floorspace1.5x1 mHorizontal plate filt ...

General SKU260S238 LocationBarneveld MakeF.H. Schule GmbH (D) TypeKUK 630/ III VDL-1 No.304224-2A Year of construction1986 Pressure Working pressure12 Bar Main Features MaterialPolypropylene Pressure12 Bar Surface26 m2 Specified Features - Filterpress Filter presscheck Filter surface26 m2 Recessed chamber platescheck Number of platens52 Internal platen sizes510x510mm External platen sizes630x630mm Platen thickness45mm Frame thickness10mm Cake capacity260 ltr. Central inletdia. 50mm Connectionsdia. 50mm Hydraulic closingcheck With hydraulic unitcheck MaterialPolypropylene Information Total height1,0 M Weight2000 Kg Floorspace4,3x1,7 MFilterpressesSchuleFilters > FilterpressesBrand > Schule What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are wel ...

General SKU373S899 LocationBarneveld MakeNetzsch Filtrationstechnik GmbH (D) TypeFigur-Nr. 021 Größe 14 No.040002268 Year of construction2003 Pressure Working pressure15 Bar Main Features MaterialPolypropylene Pressure15 Bar Surface4.75 m2 Specified Features - Filterpress Filter presscheck Filter surface4,75 m2 Recessed chamber platescheck Number of platens24 Internal platen sizes315x315mm External platen sizes400x400mm Platen thickness50mm Frame thickness13mm Cake capacity61 ltr. Central inletdia 23mm Connectionsdia 20mm (4x) With outlets on platensdia 15mm Hydraulic closingcheck With hydraulic unithandpump MaterialPolypropylene Information Total height1,7 M Weight850 Kg CEcheck Floorspace3,2x0,9 M Extra Specifications24 additional plates without liquid outlet FilterpressesNetzschFilters > FilterpressesBrand > Netzsch What you can expect from Foeth:  ...

General SKU345S816 LocationBarneveld MakeSchenk Typeunknown missing type plate Main Features MaterialPolypropylene Surface7.52 m2 Specified Features - Filterpress Filter presscheck Filter surface7,52 m² Recessed chamber platescheck Number of platens16 Number of frames24 Internal platen sizes490x490 mm (390mm) External platen sizes590x590 mm Platen thickness27 mm Frame thickness38 mm Cake capacity214 Ltr. Connectionsdia. 23 mm (2x) Hydraulic closingcheck With hydraulic unitcheck (pneumatisch) MaterialPolypropylene Information Mounted on wheelscheck Floorspace3,3x0,85 m Total height1,2 m Weight1600 kgFilterpressesSchenkFilters > FilterpressesBrand > Schenk What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneve ...

General SKUR1232 LocationBarneveld MakeUetersener Eisenwerk (D) TypeCHDI 12Q K48/40 PP No.43090 Year of construction1981 Pressure Working pressure4 Bar Main Features MaterialPolypropylene Pressure4 Bar Surface121 m2 Specified Features - Filterpress Filter presscheck Filter surface121 m2 Recessed chamber platescheck Number of platens50+1 Internal platen sizes1100x1100mm External platen sizes1200x1200mm Platen thickness70mm Frame thickness18mm With membranes on platensca. 19µm Cake capacity2100 ltr Central inletcheck Hydraulic closingcheck With hydraulic unitcheck Automatic openingcheck MaterialPolypropylene Information Total height2,3 M Weight10000 Kg Floorspace6,4x2,0 M Extra SpecificationsIncluding frame with platform and :collection trayFilterpressesUetersen EisenwerkFilters > FilterpressesBrand > Uetersen Eisenwerk What you can expect from Foeth: -- ...

General SKU203S014 LocationBarneveld MakeFilmac srl S/L Filtration (It) TypeFiltropressa BC-800.40(35).25 No.91137 Year of construction2000 Pressure Working pressure16 Bar Main Features MaterialPolypropylene Pressure16 Bar Surface33.6 m2 Specified Features - Filterpress Filter presscheck Filter surface38,3 m² Recessed chamber platescheck Number of platens35 Internal platen sizes740x740 mm External platen sizes800x800 mm Platen thickness60 mm With membranes on platenscheck Cake capacity191,6 Ltr. Central inletdia. 80 mm Connectionsdia. 80 mm With outlets on platenscheck Hydraulic closingcheck With hydraulic unitcheck Motor14,4 kW 230/400 Volt MaterialPolypropylene Information With switchgearas is Total height2 m Weight4500 kg CEcheck Floorspace5x1,6 mFilterpressesFilmacFilters > FilterpressesBrand > Filmac What you can expect from Foeth: -- Machine is  ...

General SKU373S901 LocationBarneveld MakeAndritz Filtrationstechnik GmbH (D) TypeFigur Nr. 021 Größe 14 No.C20802361 Year of construction2007 Pressure Working pressure15 Bar Main Features MaterialPolypropylene Pressure15 Bar Surface8.9 m2 Specified Features - Filterpress Filter presscheck Filter surface8.9 m2 Number of platens45 Internal platen sizes315x315mm External platen sizes400x400mm Platen thickness47mm Frame thickness13mm Cake capacity115 ltr Central inletdia. 25mm Hydraulic closingcheck With hydraulic unithandpump With feeding pompAlmatec membranepump MaterialPolypropylene Information Floorspace3,3x0,9 M Total height1,7 M Weight900FilterpressesAndritz SeparationFilters > FilterpressesBrand > Andritz Separation What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any dest ...

General SKU237T273 LocationBarneveld MakeStrassBurger Filter Typemissing type plate Main Features MaterialStainless steel Surface42.5 m2 Specified Features - Filterpress Filter presscheck Filter surface42,5 m2 Stainless steel platescheck Number of platens70 Number of frames95 Internal platen sizes555x555 mm External platen sizes615x615 mm Platen thickness11 mm Frame thickness25 mm Cake capacity720 Ltr. Connections dia. 38 mm (4x) Mechanical closingcheck MaterialMild steel, Stainless steel Information Weight3700 kg Floorspace5,9x0,95 m Total height1,4 m Extra Specificationswithout hydraulic unitFilterpressesStrassBurger Filter GmbHFilters > FilterpressesBrand > StrassBurger Filter GmbH What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to i ...

clamping force: 2700 kN injection volume: 3300 cm³ screw diameter: -- mm platen size: 780 x 670 mm Condition: used, Specification: vertical injection moulding machine for rubber NR, EPDM, SBR, NBR, CR, etc. - used, in very good condition 6 months in use clamping unit: - Euromap (size): 2700-7200 - Clamping force: 2,700 kN - Heating platen size L/W/H: 780 x 670 mm - Distance between upper and lower platen: 970 mm - Stroke min.: 420 mm - Stroke: 550 mm Injection unit: - Injection volume max.: 3,300 cm³ - Injection pressure: 2,180 bar - Nozzle contact force: 80 kN - Connected load: 3x 400 V, 50 Hz, N - Back-up fuse: 125 A - Pump drive: 265 bar - Drive power: 22 kW - Pump speed: 66 rpm - Current: 41 A - Weight approx.: 11.2 tonnes Operating hours approx.: 8,185 hours ...

clamping force: 2700 kN injection volume: 3300 cm³ screw diameter: -- mm platen size: 780 x 670 mm Condition: used, Specification: vertical injection moulding machine for rubber NR, EPDM, SBR, NBR, CR, etc. - used, in very good condition almost unused! clamping unit: - Euromap (size): 2700-7200 - Clamping force: 2,700 kN - Heating platen size L/W/H: 780 x 670 mm - Distance between upper and lower platen: 970 mm - Stroke min.: 420 mm - Stroke: 550 mm Injection unit: - Injection volume max.: 3,300 cm³ - Injection pressure: 2,180 bar - Nozzle contact force: 80 kN - Connected load: 3x 400 V, 50 Hz, N - Back-up fuse: 125 A - Pump drive: 265 bar - Drive power: 22 kW - Pump speed: 66 rpm - Current: 41 A - Weight approx.: 11.2 tonnes Operating hours approx.: 395 hours  ...

Specification IMPERIA F + feeder + Special batch Delivery · Nr. 1 (one) S/H IMPERIA F 120x165cm with electronic feeder and special batch delivery system, delivered, controlled and checked with 6 months warranty · Year of manufacture 2000 · with electronic feeder (no high pile) · Speed Approx. 1350 strokes per hour · min board thickness 400gr/m² · Corrugated board thickness max 7mm · pneumatic clutch- variable speed, · Equipped according to CE regulations · special suction cups with 50mm telescopic – pneumatically adjustable arms · SPS System · PICARD die cutting plate · micrometric adjustment of the pressure in addition to the standard one · special universal chase-mobile delivery table for conveying blanks, pneumatically controlled with automatic lowering device allowing to the opera ...

Code: 0252 Brand: COLOMBO Model: 13/8 Presses (No. 2) suitable to bend different types of materials such as solid wooden strips and veneer - es: curved plywood, shells for chairs, seats, sofas, etc. - Equipped with with high-frequency generator The presses can work with mould and counter-mould or with steel-belt 1° Press Platen dimensions mm 1300 x 800 Opening mm 700 Thrust Piston diameter mm 150 Overall dimensions mm 2100 x 1000 x 2500 h 2° Press Platen dimensions mm 1300 x 800 Opening mm 700 Thrust Piston diameter mm 150 Overall dimensions mm 2100 x 1000 x 2500 h High frequency generator GIORDANO COLOMBO Overall dimensions mm 1100 x 1100 x 1900 h

Description Machine for thermosetting equipped with heating and magnetic platen Dimension platen: 400x400 CE certificate Weight: 3600kg

JR Dare Press Plate: 1400mm x 1400mm Daylight 530 mm 4 x rams Ram diameter - 16” Max working pressure - 1500 PSI Clamping tonnage - 600T Platen heating - strip heaters 18KW / platen

KRAUSS MAFFEI KM 110-520 C1 warehouse no.: 503020 manufacturer: KRAUSS MAFFEI type: KM 110-520 C1 controller: MC4 year of construction: 2003 technical data clamping unit clamping force: 1100 kN distance between tie bars h:: 470 mm distance between tie bars v:: 470 mm size of mould plates h: 745 mm size of mould plates v: 770 mm min. mould height: 300 mm max. open daylight: 900 mm opening stroke: 600 mm ejector stroke: 150 mm ejector force: 22 kN centering diameter of moving platen: 125 mm centering diameter of fixed platen: 125 mm weight of mould: 1485 kg technical data injection unit screw diameter: 40 mm swept volume: 217 ccm injection pressure: 2377 bar screw length: 23 l/d screw speed: 307 min plasticising rate: 22 g/s PS injection rate into the open: 126 g/s PS number of heating zones: 5 measures & weight measures of machine lxbxh: 4.4m x 1.5 ...

clamping force: 2000 kN injection volume: 251 cm³ screw diameter: 40 mm platen size: 1.050 x 900 mm daylight between platens - max.: 880 mm Condition: used, very good condition Specification: Vertical injection moulding machine, with rotary table injection unit: - screw diameter: 40 mm - injection volume: 251 cm³ - Injection flow: 244 cm³/sec - Spec. injection pressure: 1,300 bar - Spec. injection pressure increased: 2,020 bar - Nozzle stroke: 500 mm - Nozzle pressure: 51.9 kN Clamping unit: - Clamping force max.: 2,000 kN - Clamping platens hor. x vert. 820 x 459 mm - Max. platen distance: 880 mm - Opening stroke: 400 mm - Mould installation height: 480 mm - Ejector stroke: 105 mm Number of heating zones incl. nozzle: 4 - Heating power: 9.3 kW - Weight clamping unit: 11,000 kg - Weight injection unit: 3.500 kg - Wei ...

clamping force: 450 kN injection volume: 135 cm³ screw diameter: 35 mm platen size: 600 x 400 mm Condition: used, Specification: C-frame injection moulding machine for TPE - used clamping unit: - clamping force: 450 kN - heating platen size: 600 x 400 mm - sliding table: yes - Clamping direction: from below - Ejector / lifter: Up + Lo Injection unit: - Injection volume max.: 135 cm³ - Screw diameter: 35 mm - Connected load: 3x 400 V, 50 Hz - Weight approx.: 5,500 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used machine in good condition. Available for immediate delivery. - Screw diameter: 35 mm - Shot weight max: 123 g - Injection pressure: 1.964 bar - Injection volume: 0 cm? - Screw speed: 400 rpm - Screw L/D ratio: 20 - Nozzle stroke max: 240 mm - Clamping force: 850 kN - Mould height max: 450 mm - Mould height min: 250 mm - Daylight between platens max: 800 mm - Platen size h: 690 mm - Platen size v: 690 mm - Ejector force: 50 kN - Core pullers: 1 x KDE-6-S-B - Oil tank capacity: 290 l - Power: installed max: 29 kW

clamping force: 250 kN injection volume: 49 cm³ screw diameter: 25 mm platen size: 300 x 300 mm Condition: used, specification: C-frame injection moulding machine - used clamping unit: - clamping force: 250 kN - heating platen size: 300 x 300 mm - clamping/opening stroke: 330 mm - Closing direction: from below - Lateral ejector: yes - Ejector stroke/force: 115 mm / 12 kN Injection unit: - Injection volume max.: 49 cm³ - Screw diameter: 25 mm - Screw length: 16 - Screw speed max.: 250 rpm - Injection: from above - Voltage: 3x 400 V, 50 Hz, N, PE - Connected load: 55 kW/92 A - Weight approx.: 3,500 kg Various accessories are also available: - Injection unit (25 screw) - 2 heating plates - Funnel and various small parts The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used machine in good condition. Available for immediate delivery. - Screw diameter: 30 mm - Shot weight max: 104 g - Injection rate: 111 cm?/s - Injection pressure: 2.400 bar - Injection volume: 113 cm? - Screw speed: 400 rpm - Screw L/D ratio: 23,6 - Nozzle stroke / force max.: 250 / 47 mm / kN - Nozzle stroke max: 160 mm - Clamping force: 1.600 kN - Mould opening stroke max: 600 mm - Mould height max: 300 mm - Mould height min: 300 mm - Daylight between platens max: 900 mm - Distance between tie-bars h: 550 mm - Distance between tie-bars v: 550 mm - Platen size h: 750 mm - Platen size v: 750 mm - Ejector force: 61 kN - Control: CC200 - Oil tank capacity: 460 l - Power: installed max: 30 kW - Operating hours: 28.140 - Dimensions (long x wide x high): 5.800 x 1.700 x 2.400 mm - Weight: 9.500 kg

clamping force: 1.300 kN injection volume: 230 cm³ screw diameter: 45 mm platen size: 685 x 685 mm Condition: used, Specification: injection moulding machine for TPE - used including Koch dosing unit clamping unit: - clamping force: 1.300 kN - heating platen size: 685 x 685 mm - Clear distance between tie bars: 470 x 470 mm - Mould installation height min.: 250 mm - Distance between platens max.: 900 mm - Opening stroke max.: 650 mm - Ejector stroke: 225 mm Injection unit: - Screw diameter: 45 mm x 18D - Injection volume max.: 230 cm³ - Injection part weight: 210 g/hp - Max. injection pressure: 1,670 bar - Screw circumferential speed: 75 m/min - Cylinder heating: 4x 2,200 W - Nozzle heating: 600 W - Connection value: 3x 400 V, 50 Hz - Electrical connection (back-up fuse): 100 A - Weight approx.: 6,3 ...

clamping force: 1.013 kN injection volume: 400 cm³ screw diameter: 25 mm platen size: 335 x 400 mm Condition: used, Specification: injection moulding machine for rubber - used clamping unit: - clamping unit: vertical - clamping force: 1.013 kN - size of heating platen: 335 x 400 mm (standard) core turning unit Injection unit: - screw diameter: 25 mm - Barrel diameter: 51 mm - Injection volume max.: 400 cm³ - Injection pressure: 1,500 bar - Connection value: 3x 400 V, 50 Hz 42A fuse protection (incl. periphery) - Electrical power: 29,1 kVA - Control: G8 Control - Hydraulics: 250 bar (tank 200 litres) - Further connections: Cooling water inlet/outlet Dimensions L/W/H approx.: 2,300 x 3,400 x 2,250 mm Weight approx.: 2,950 kg Not for sale: Article-specific extensions (demoulding unit,  ...

clamping force: 350 kN injection volume: 58,5 cm³ screw diameter: 28 mm platen size: 260 x 254 mm Condition: used, Specification: injection moulding machine for TPE - used clamping unit: - clamping unit: vertical - clamping force: 350 kN - opening stroke max.: 300 mm - platen distance max.: 500 mm - Mould installation height min.: 200 mm - Clear width between tie bars: 260 x 254 mm - Ejector stroke max.: 80 mm - Clamping unit: VV - Lift of protective bonnet: 500 mm Injection unit: - Screw diameter: 28 mm - Screw L/D ratio: 18.6 - Screw stroke max.: 95 mm - Injection volume max.: 58.5 cm³ - Injection pressure: 1577 bar - Plasticising flow: 8.6 g/s - Injection flow: 85.5 g/s - Connected load: 3x 400 V, 50 Hz - Max. heating power: 5.8 kW - Drive power: 7,4 kW - Total power: 13,2 kW - Hydraulics: 210 bar (tank 65 litr ...

Here we offer a maintained injection molding machine. Manufacturer: Arburg Type: 520C 1600-350 with Multilift Control Selogica Year of manufacture: 2001 operating hours: 55400 h constantly maintained (until 2022 by Arburg) Special features/extras: -Multilift Robot Closing side: Clamping force: 1600 kN/ 160 tons tie bar size hxv 520 x 520 mm platen size hxv: 728 x 728 mm Installation height min: 250 mm platen distance max: 900 mm opening stroke: 650 mm ejector stroke: 225 mm ejector force: 66 kN Injection side screw diameter 45 mm Stroke volume 230 ccm injection weight: 210 gr./hp injection pressure: 1670 bar dimensions: 5750 x 1950 x 2350 mm (L x W x H) Weight: 6.500 kg. - from week 48 2022 immediately available in our warehouse Hannover/Germany - Function tested (guaranteed function until first start-up)

clamping force: 800 kN injection volume: 177 cm³ screw diameter: 35 mm platen size: 580 x 580 mm Condition: used, Specification: Horizontal injection moulding machine, type: Ergotech viva 80-400 - Internat. Size specification: 800 - 400 injection unit: - Screw diameter: 35 mm - L/D - ratio: 20D - Injection volume: 177 cm³ - Injection pressure: 2387 bar - Cylinder heating: 8,8 kW clamping unit: - Clamping force: 800 kN - Max. opening stroke: 450 mm - Mould installation height: min. 250 mm - Max. platen distance: 700 mm - Mould clamping platens: 580 x 580 mm - Clear column distance: 400 x 400 mm Total machine: - Oil tank filling: 220 ltr. - Pump capacity: 15 kW - Voltage: 3x 400V, 50 Hz, N, PE - total power: 23,8 kW - Dimensions L/W/H: approx. 4250 x 1270 x 1795 mm - Weight without oil approx.: 3,600 kg - 1x core pull Plant i ...

clamping force: 600 kN injection volume: 106 cm³ screw diameter: 30 mm platen size: 590 x 600 mm Condition: used, Specification: Horizontal injection moulding machine, type: System 60/420-200 - Internat. Size specification: 600 - 200 injection unit: - Screw diameter: 30 mm - L/D - ratio: 20D - Injection volume: 106 cm³ - Injection pressure: 1995 bar - Cylinder heating: 8,3 kW clamping unit: - Clamping force: 600 kN - Max. opening stroke: 450 mm - Mould installation height: min. 250 mm - Max. platen distance: 700 mm - Mould clamping platens: 590 x 600 mm - Clear column distance: 420 x 420 mm Total machine: - Oil tank filling: 180 ltr. - Pump capacity: 22 kW - Voltage: 3x 400V, 50 Hz - total power: 30,3 kW - Dimensions L/W/H: approx. 4200 x 1400 x 2000 mm - Weight without oil approx.: 3,950 kg - 2x core pull Plant is still in ...

clamping force: 350 kN injection volume: 59 cm³ screw diameter: 25 mm platen size: 400 x 400 mm Condition: used, Specification: injection moulding machine for rubber - used International size: 350-90 clamping unit: - clamping force: 350 kN - clamping platen size: 400 x 400 mm - Clear distance between tie bars: 270 x 270 mm - Mould installation height min.: 225 mm - Distance between clamping platens: max. 550 mm - Opening stroke max.: 325 mm - Ejector stroke: 125 mm Injection unit: - Screw diameter: 25 mm x 20D - Injection volume max.: 49 cm³ - Injection part weight: 59 g/hp - Max. injection pressure: 1,860 bar - Screw circumferential speed: 37 m/min - Cylinder heating: 4x 900 W - Nozzle heating: 300 W - Heating complete: 4,6 kW - Pump motor: 11 kW - Total power ...

clamping force: 1.000 kN injection volume: 203 cm³ screw diameter: 40 mm platen size: 580 x 652 mm Condition: used, Specification: Horizontal 2K-injection moulding machine, injection unit 1: - Screw diameter: 40 mm - injection volume: 230 cm³ - weight: 205 g Clamping unit: - Clamping force: 1000 kN - Centring: 125 mm - Platen size: 580 x 652 mm - Mould size: 400 x 400 mm - Mould thickness min.: 250 mm - Mould thickness max.: 450 mm - 1x core pull - Voltage: 3x 400V, 50Hz, N, PE - Total power: 25 kW - Dimensions L/W/H: approx. 4,350 x 1,400 x 1,900 mm - Weight approx.: 4,750 kg Further DEMAG plastic injection moulding machines and a conveyor control/material station for 4 to 56 separators for granulate conveying on our homepage. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

clamping force: 6500 kN injection volume: 2011 / 323 cm³ screw diameter: 80 / 45 mm platen size: 1450 x 1350 mm Condition: used, Specification: Horizontal 2K-injection moulding machine, DEMAG ergotech 650-5200-610 incl. handling injection unit 1: - Screw diameter: 80 mm - injection volume: 2.011 cm³ - weight: 1810 g injection unit 2: - Screw diameter: 45 mm - injection volume: 323 cm³ - weight: 290 g Clamping unit: - Clamping force: 6500 kN - Centring: 200 mm - Platen size: 1450 x 1350 mm - Mould size: 1000 x 910 mm - Mould thickness min.: 450 mm - Mould thickness max.: 950 mm - 2x core pull - Handling: Yes - Voltage: 3x 400V, 50Hz, N, PE - Total power: 245 kW - Dimensions L/W/H: approx. 10,100 x 5,500 x 5,000 mm - Weight approx.: 36,000 kg Further DEMAG plastic injection mould ...

clamping force: 4200 kN injection volume: 1212 /292 cm³ screw diameter: 70 /15 mm platen size: 1200 x 1100 mm Condition: used, Specification: Horizontal 2K-injection moulding machine, DEMAG Multi 420/810-2300h/430 incl. handling injection unit 1: - Screw diameter: 70 mm - injection volume: 1.112 cm³ - weight: 880 g injection unit 2: - Screw diameter: 15 mm - injection volume: 292 cm³ - weight: 190 g Clamping unit: - Clamping force: 1200 kN - Centring: 160 mm - Platen size: 1200 x 1100 mm - Mould size: 810 x 710 mm - Mould thickness min.: 380 mm - Mould thickness max.: 940 mm - 4 & 4 Cascades - 4x core pull - Handling: Yes - Voltage: 3x 400V, 50Hz, N, PE - Total power: 192 kW - Dimensions L/W/H: approx. 7,900 x 2,200 x 5,000 mm - Weight approx.: 25,000 kg Further DEMAG plastic i ...

clamping force: 800 kN injection volume: 106 / 42 cm³ screw diameter: 30 / 22 mm platen size: 600 x 600 mm Condition: used, Specification: Horizontal 2K-injection moulding machine, injection unit 1: - Screw diameter: 30 mm - injection volume: 106 cm³ - weight: 94 g injection unit 2: - Screw diameter: 22 mm - injection volume: 42 cm³ - weight: 37 g Clamping unit: - Clamping force: 800 kN - Centring: 125 mm - Platen size: 600 x 600 mm - Mould size: 420 x 420 mm - Mould thickness min.: 250 mm - Mould thickness max.: 590 mm - Voltage: 3x 400V, 50Hz, N, PE - Total power: 42 kW - Dimensions L/W/H: approx. 4,300 x 1,400 x 3,600 mm - Weight approx.: 5,750 kg Further DEMAG plastic injection moulding machines and a conveyor control/material station for 4 to 56 separators for granulate conveying on our homepage. The data for th ...

clamping force: 800 kN injection volume: 78 cm³ screw diameter: 25 mm platen size: 570 x 552 mm Condition: used, Specification: injection moulding machine for LSR - used Nr. 13EN08 clamping unit: - clamping force: 800 kN - size of heating platen: 570 x 552 mm - Between tie bars horizontally: 405 mm - Between tie bars vertically: 345 mm - Opening stroke: 310 mm - Ejector force: 25.4 kN - Ejector stroke: 100 mm - Mould installation height max.: 530 mm - Mould installation height min.: 250 mm - Bar diameter: 60 mm - Control: CC 90-A0 Injection unit: - Injection volume max.: 78 cm³ - Injection weight max.: 90 g - Screw diameter: 25 mm - Metering stroke: 160 mm - Screw speed max.: 20 - 400 rpm - Injection flow: 87 g/sec - Injection flow (increased): 64 g/sec - Specific injection pressure: 2400 bar - Nozzle stroke:  ...

clamping force: 800 kN injection volume: 154 cm³ screw diameter: 35 mm platen size: 570 x 552 mm Condition: used, Specification: injection moulding machine for LSR - used Nr. 13EN12 clamping unit: - clamping force: 800 kN - size of heating platen: 570 x 552 mm - Between tie bars horizontally: 405 mm - Between tie bars vertically: 345 mm - Opening stroke: 310 mm - Ejector force: 25.4 kN - Ejector stroke: 100 mm - Mould installation height max.: 530 mm - Mould installation height min.: 250 mm - Bar diameter: 60 mm Injection unit: - Injection volume max.: 154 cm³ - Injection weight max.: 156 g - Screw diameter: 35 mm - Metering stroke: 160 mm - Screw speed max.: 20 - 320 rpm - Delivery flow: 35 g/sec - Injection flow: 148 g/sec - Injection flow (increased): 107 g/sec - Specific injection pressure: 1600 bar ...

Cambridge Dynamics Press 60ton Platen 1m x 1m Platen max. speed 20mm/s Year 2020 For composite, prepreg, SMC Sheet moulding Compound

clamping force: 4.000 kN injection volume: 735 cm³ screw diameter: 60 mm platen size: 1.400 x 1.030 mm Condition: used, Specification: horizontal injection moulding machine, factory no: Injection unit 1: - screw diameter: 60 mm - metering stroke: 200 mm - Screw speed: 226 rpm - Injection flow: 351 cm³/sec - Injection volume: 735 cm³ - Spec. injection pressure: 1.489 bar - Spec. injection pressure increased: 2,011 bar Injection unit 2: - Screw diameter: 40 mm - Metering stroke: 140 mm - Screw speed: 400 rpm - Injection flow: 197 cm³/sec - Injection volume: 251 cm³ - Spec. injection pressure: 1.286 bar - Spec. injection pressure increased: 2.029 bar Clamping unit: - Clamping force max.: 4,000 kN - Clamping platens: 1,400 x 1030 mm - Opening stroke: 954 mm - Max. platen distance: 1,520 mm - Ejector stroke: 250 mm - Ejector forc ...

SUMITOMO-DEMAG IntElect 210/580 Clamping force : 210 Tons Screw diameter : 35.0 mm Tie bar spacing (H) : 580.0 mm Tie bar spacing (V) : 580.0 mm Shot volume : 178.0 cm³ Shot weight : 158.0 g Pressure on material : 2800 bar Platen length : 880.0 mm Platen width : 850.0 mm Opening of the press : 1265.0 mm Mould size : 690 Length x width x height : 6260.0 mm × 1555.0 mm × 2071.0 mm Weight : 9800.0 kg Worked hours : 26615 hours Hours under power : 32244 hours State excellent At local norms : yes Status : under power max inj stroke -185 mm Operating hours – CPU-32143 ,Drives -26215 ,Heating -26500 Total cycle -16686388 Clamping Force 2100 KN Injection unit 500 Screw diameter 35 mm 400 V / 50 HZ Manufacture year –October 2010 Net Weight-9800 kg Injection and Clamp Drives renewed in 2015 The machine is in excellent condit ...

800t clamping force Battenfeld machine, year 2008 The machine was used for a project in the auto industry but the last months there is no work for this machine. Clamping force 800.0 T Screw diameter 85.0 Tie bar spacing (H) 1120.0 Tie bar spacing (V) 1020.0 Shot volume 2412.0 Shot weight 2195.0 Pressure on material 2110.0 bar Platen length 1620.0 Platen width 1530.0 Robot interface E67 Number of cores 4.0 Number of heating zones

The blow moulding machine ptb120d used for producing toys, drums, jerrycans, kettles, water tanks, etc, is single station with single die head, which is specially designed for 60l as maximum volume, suitable for hdpe, pe, pp, pvc, petg and other materials for blow moulding. Specifications: Max container capacity: 60 L Number of die heads: 1 Machine dimension (LWH): 865.0 meters Total weight: Ton 35 CLAMPING UNIT Clamping force: 600 KN Platen opening stroke: 880-1780 mm Platen size: 9501000 mm Max mould size: (WH) 9501600 mm Mould thickness: 900-1100 mm POWER Total power: 200 KW Fan power for screw : 0.185 KW Air pressure: 1.0 Mpa Air consumption: 1.2 M3/min Average energy consumption: 120 KW EXTRUDER UNIT Screw diameter: 120 mm Screw L/D ratio: 30:1 L/D Plasticizing capacity: 250 Kg/hour Number of heating: 5 Zone Extruder heating power: 32 KW  ...