plate used for sale

: neu : ca. 10 Wochen ab Auftrags : Türkei : 36300 € : 693.33 € : 2050 mm : 8 mm : 8 mm : 6 mm : 6 mm : 4 mm : 180 mm : 180 mm : 150 mm : 1,5 / 6 m/min : 5.5 kW : 4400 mm : 1150 mm : 1250 mm : 3790 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of r ...

: neu : ca. 12 Wochen ab Auftrags : Italien : 1500 mm : 6 mm : 6 mm : 4 mm : 5 mm : 4 mm Hardened and polished rollers Numerical control Siemens PGS-Classic with touchscreen Cone bending with electronic control and inclination of the bottom roller oil cooler Simultaneous rotation and roller movement Simultaneous roller and support movement Possibility to bend variable radii (ovals, ellipses, etc.) Hydraulic micro-positioning by the PLC for higher accuracy Infinitely variable speed for roller movement Infinitely variable speed for rotation Prepared for retrofitting supports (up to 5 axes) Prepared for retrofitting loading/unloading stations Prepared for retrofitting CNC controls Extra large, double hinged drop end Electronic parallelism system for the synchronization of the rollers Hydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more) Double linear guid ...

: neu : 2024 : 9739 : prompt, Zwischenverkauf v : Türkei : 22300 € : 428.16 € : 1 : 1 : 2030 mm : 6 mm : 6 mm : 5 mm : 170 mm : 4 kW : 3600 mm : 1020 mm : 1120 mm : 2400 kg 3 rolls Asymmetrical rolls arrangement - with pre-bending 2 driven rolls Motorized adjustment of lateral and clamping roll Digital read-out for lateral and clamping roll Swiveling top roll to the front Forward/reverse run Hardened rolls Moveable control panel User manual in GERMAN and ENGLISH (sample photo) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Italien : 2500 mm : 27 mm : 27 mm : 18 mm : 23 mm : 20 mm Hardened and polished rollers Numerical control Siemens PGS-Classic with touchscreen Cone bending with electronic control and inclination of the bottom roller oil cooler Simultaneous rotation and roller movement Simultaneous roller and support movement Possibility to bend variable radii (ovals, ellipses, etc.) Hydraulic micro-positioning by the PLC for higher accuracy Infinitely variable speed for roller movement Infinitely variable speed for rotation Prepared for retrofitting supports (up to 5 axes) Prepared for retrofitting loading/unloading stations Prepared for retrofitting CNC controls Extra large, double hinged drop end Electronic parallelism system for the synchronization of the rollers Hydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more) Double linear ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 31600 € : 603.56 € : 2050 mm : 6 mm : 6 mm : 4 mm : 4 mm : 3 mm : 150 mm : 150 mm : 130 mm : 1,5 / 6 m/min : 4 kW : 4250 mm : 960 mm : 1100 mm : 2800 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of roll ...

: neu : 2025 : 090120 : prompt, Zwischenverkauf v : Türkei : 7500 € : 144.75 € : 1 : 1 : 1050 mm : 3 mm : 90 mm : 6 m/min : 1.1 kW : 1630 mm : 700 mm : 1200 mm : 480 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor lateral roll adjustable by handwheel longitudinal grooves in lower and lateral roll HARDENED ROLLS tiltable upper roll right / left rotation with double foot switch conical rolling device user manual in GERMAN The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A deck press, also suitable for the production of armor plates also suitable for the production of armor plates Make: Becker&Van Hüllen Pressing force 5000 tons 10 floors heatable 3.0 meters x 1.30 meters Control New from Stadthagen

: neu : ca. 10 Wochen ab Auftrags : Türkei : 14700 € : 282.24 € : 1550 mm : 4 mm : 140 mm : 3,5 m/min : 2.2 kW : 2700 mm : 750 mm : 1000 mm : 1420 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor manual Back Roll forward tiltable upper roll forward and reverse revs conical bending by tilt of backroll movable control panel users manual in ENGLISH or GERMAN OPTIONS (PRICES ON REQUEST): hardened Rolls Motorised Back Roll (Power Rear Roll) Digital Read-Out The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 25200 € : 481.32 € : 1050 mm : 2.5 mm : 2.5 mm : 2 mm : 90 mm : 4,5 m/min : 2.2 kW : 2250 mm : 1000 mm : 1500 mm : 900 kg FOR ROUND AND ELEPTIC SHAPES FOR MASS PRODUCTION (CYCLE UP TO ONLY 20 SEC POSSIBLE) 4 rolls NC control with touchscreen Top roll driven by hydromotor and plantary gearbox Hydraulic drop end Mobile control panel Hardened rolls Operating manual in English or German OPTION: Feeding table price on request The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2024 : 9740 : prompt, Zwischenverkauf v : Türkei : 6500 € : 125.45 € : 1 : 1050 mm : 3 mm : 90 mm : 6 m/min : 1.1 kW : 1630 mm : 700 mm : 1200 mm : 480 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor lateral roll adjustable by handwheel longitudinal grooves in lower and lateral roll tiltable upper roll right / left rotation with double foot switch conical rolling device user manual in GERMAN The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Italien : 2000 mm : 6 mm : 6 mm : 4 mm : 5 mm : 4.5 mm Hardened and polished rollers Numerical control Siemens PGS-Classic with touchscreen Cone bending with electronic control and inclination of the bottom roller oil cooler Simultaneous rotation and roller movement Simultaneous roller and support movement Possibility to bend variable radii (ovals, ellipses, etc.) Hydraulic micro-positioning by the PLC for higher accuracy Infinitely variable speed for roller movement Infinitely variable speed for rotation Prepared for retrofitting supports (up to 5 axes) Prepared for retrofitting loading/unloading stations Prepared for retrofitting CNC controls Extra large, double hinged drop end Electronic parallelism system for the synchronization of the rollers Hydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more) Double linear gu ...

: neu : ca. 12 Wochen ab Auftrags : Italien : 2000 mm : 22 mm : 22 mm : 16 mm : 19 mm : 17 mm Hardened and polished rollers Numerical control Siemens PGS-Classic with touchscreen Cone bending with electronic control and inclination of the bottom roller oil cooler Simultaneous rotation and roller movement Simultaneous roller and support movement Possibility to bend variable radii (ovals, ellipses, etc.) Hydraulic micro-positioning by the PLC for higher accuracy Infinitely variable speed for roller movement Infinitely variable speed for rotation Prepared for retrofitting supports (up to 5 axes) Prepared for retrofitting loading/unloading stations Prepared for retrofitting CNC controls Extra large, double hinged drop end Electronic parallelism system for the synchronization of the rollers Hydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more) Double linear ...

: neu : ca. 12 Wochen ab Auftrags : Italien : 2500 mm : 14 mm : 14 mm : 8.4 mm : 10 mm : 9 mm Hardened and polished rollers Numerical control Siemens PGS-Classic with touchscreen Cone bending with electronic control and inclination of the bottom roller oil cooler Simultaneous rotation and roller movement Simultaneous roller and support movement Possibility to bend variable radii (ovals, ellipses, etc.) Hydraulic micro-positioning by the PLC for higher accuracy Infinitely variable speed for roller movement Infinitely variable speed for rotation Prepared for retrofitting supports (up to 5 axes) Prepared for retrofitting loading/unloading stations Prepared for retrofitting CNC controls Extra large, double hinged drop end Electronic parallelism system for the synchronization of the rollers Hydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more) Double linear ...

: neu : ca. 12 Wochen ab Auftrags : Italien : 2500 mm : 20 mm : 20 mm : 12 mm : 15 mm : 13 mm Hardened and polished rollers Numerical control Siemens PGS-Classic with touchscreen Cone bending with electronic control and inclination of the bottom roller oil cooler Simultaneous rotation and roller movement Simultaneous roller and support movement Possibility to bend variable radii (ovals, ellipses, etc.) Hydraulic micro-positioning by the PLC for higher accuracy Infinitely variable speed for roller movement Infinitely variable speed for rotation Prepared for retrofitting supports (up to 5 axes) Prepared for retrofitting loading/unloading stations Prepared for retrofitting CNC controls Extra large, double hinged drop end Electronic parallelism system for the synchronization of the rollers Hydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more) Double linear ...

: neu : ca. 12 Wochen ab Auftrags : Italien : 3050 mm : 12 mm : 12 mm : 6.5 mm : 8 mm : 8 mm Hardened and polished rollers Numerical control Siemens PGS-Classic with touchscreen Cone bending with electronic control and inclination of the bottom roller oil cooler Simultaneous rotation and roller movement Simultaneous roller and support movement Possibility to bend variable radii (ovals, ellipses, etc.) Hydraulic micro-positioning by the PLC for higher accuracy Infinitely variable speed for roller movement Infinitely variable speed for rotation Prepared for retrofitting supports (up to 5 axes) Prepared for retrofitting loading/unloading stations Prepared for retrofitting CNC controls Extra large, double hinged drop end Electronic parallelism system for the synchronization of the rollers Hydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more) Double linear  ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 32480 € : 620.37 € : 1550 mm : 9 mm : 9 mm : 7 mm : 7 mm : 5 mm : 180 mm : 180 mm : 150 mm : 1,5 / 6 m/min : 5.5 kW : 3900 mm : 1150 mm : 1250 mm : 3250 kg 4 rolls fullhydraulic drive of upper roll and lower roll hydraulic infeed of lower and side roll digital read-out of lower and side rolls position hardened rolls conical bending device hydraulic load relieving of upper roll hydraulic drop-end bearing 2 working speeds central lubrication system protectionagainst overload moveable control pane according to CE rules OPTIONAL EQUIPMENT (PRICES ON REQUEST): infinitely adustable speed of rolls hydraulic side support hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened roll ...

: neu : ca. 12 Wochen ab Auftrags : Türkei : 21800 € : 418.56 € : 1270 mm : 5 mm : 5 mm : 4 mm : 5 mm : 4 mm : 4 mm : 3 mm : 130 mm : 130 mm : 130 mm : 5 m/min : 2,2 + 1,1 kW : 3020 mm : 1150 mm : 1110 mm : 2150 kg motorized roller drive upper and lower roller driven hydraulic side roll feed 3 digital displays hydraulic folding bearings hardened rollers conical bending device user manual in GERMAN or ENGLISH OPTIONAL EQUIPMENT (PRICES ON REQUEST): overhead crane side supports NC control variable speed The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 111500 € : 2107.35 € : 3100 mm : 20 mm : 20 mm : 16 mm : 16 mm : 12 mm : 350 mm : 350 mm : 260 mm : 1,5-5 m/min : 22 kW : 6000 mm : 2200 mm : 1900 mm : 15000 kg 4 rolls fullhydraulic drive of upper roll and lower roll hydraulic infeed of lower and side roll digital read-out of lower and side rolls position hardened rolls conical bending device hydraulic load relieving of upper roll hydraulic drop-end bearing 2 working speeds central lubrication system protectionagainst overload moveable control pane according to CE rules OPTIONAL EQUIPMENT: infinitely adustable speed of rolls hydraulic side support hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls are recommend ...

Description Item # 9369 - COCOA BUTTER PRESS FILTER HOLDING PLATE Manufactured by GSR (Italy) Vertical Press for the filter holding plate mounting Model PMT Year 2013 1.1kW, 400Volts, 50Hz The press for the filter holding plate mounting series PMT has been designed to ensure an easy, fast and correct assembly of the filter cloths on the filter-holding plates, essential condition to guarantee a longer life of the filter cloths. This specific equipment ensures the centering of the filter cloths with respect to the plate, a proper positioning of the cloth as well as the insertion of the Teflon cord to be pressed in the seat, through an hydraulic group, for a perfect fastening of the cloths on the plate with an even tension. The double push button station with simultaneous activation system ensures a safe use in compliance with the most restrictive safety rules

Load capacity: 2000kg, support surface per table X/Y: 1400mm/900mm, tilting angle: 100°, travel of the movable table: approx. 300mm, drive: hydraulic, control: PLC, operating modes: manual/automatic, collision avoidance in manual operation via table position and table inclination. Equipment: heavy-duty rollers, therefore movable. Machine dimensions X/Y/Z: approx. 2600mm/1800mm/1300mm, weight: 1310kg. Documentation available. Inspection possible by arrangement.

According to photos, weight approx. 1000kg estimated, diameter 1400mm, thickness 55mm Auction-ID: A1-48554-147

Panel dimensions: 3000 x 1500 x 350 mm incl. rolling device and a precision guide T-slot Auction-ID: A7-49089-83

Large set of clamping and assembly tools consisting of fixing plates, clamping cubes, precision brackets, machined blocks and positioning accessories. Set suitable for precision mechanics workshops, CNC machining centers, toolmaking, dimensional control or realization of specific assemblies. Interesting lot for industrial users, technical schools, methods offices and dealers of professional equipment. Content included according to photos. Auction-ID: A1-48554-415

Set consisting of circular clamping plates, fixing plates and numerous clamping accessories for machine tools and production equipment. The set includes precision clamping jaws, fasteners, brackets and mechanical components. Equipment suitable for machine shops, precision mechanics, industrial manufacturing and workstation equipment requiring robust clamping solutions. Content included according to photos. Auction-ID: A1-48554-419

Aluminum raw material package including plates, blocks and semi-finished parts of various sizes. Several elements already have machining operations, while others are offered in the form of plates or blanks. Suitable for parts manufacturing, CNC machining, prototyping, mechanical engineering, aluminum locksmithing or material reuse. Set sold in one lot with all contents visible in the photographs. Auction-ID: A1-48554-261

Lot including various aluminium parts and metal components with die-cut plates, machined elements, large square profile and large stock of small fasteners or assembly parts. Set suitable for mechanical manufacturing, prototyping, machining, metal construction or material recovery. Sold in one lot with all the elements visible in the photographs. `` Auction-ID: A1-48554-262

Sliding blade width approx. 2250 mm Incl. pallet Auction-ID: A1-49606-363

conische buiging mechanische elektrische machine met veel gereedschap voor het buigen van profielen Number of rolls: 3 rolls Roll capacity cold: 3100 x 15 mm Roll dia upside: 270 mm Profile bending machine: yes

Container divider suitable for PET and cartons

Plate clamp with lifting eye 0-40mm sheet thickness 3000kg lifting capacity Auction-ID: A1-48648-187

Plate lifting clamp 0-80mm 4000kg lifting capacity Auction-ID: A1-48648-268

2x plate lifting clamp 0-150mm sheet thickness 10000kg lifting capacity Auction-ID: A1-48648-257

Plate clamp with lifting eye 0-32mm sheet thickness 6000kg lifting capacity Auction-ID: A1-48648-185

Plate clamp with equator 0-40mm sheet thickness 2000kg lifting capacity Auction-ID: A1-48648-188

2x plate lifting clamp 0-150mm sheet thickness 10000kg lifting capacity Auction-ID: A1-48648-259

Auction-ID: A1-48648-46

Plate lifting clamp 0-80mm sheet thickness 20000kg lifting capacity Auction-ID: A1-48648-261

Functional platesetter, year of manufacture approx. 2000, little used, good condition, only for collection. Base cabinet for plates/films can be provided.

Working width: 3450 mm Working height: 2000 mm Number of cylinders: 5 St. loading dimensions L x W x H: 3600 x 1200 x 2720 mm Hess Multipress Perforated Plate Press For all sloped, segmental, and round-arch windows and doors. Also for interior work or frame construction. For gluing staircase block joints and much more. Largest working area approx. 3450 x 2000 mm External dimensions approx. 3600 x 1200 x 2720 mm The vertical perforated plate press is constructed of heavy-duty, torsion-free steel. Thanks to its simple, robust, and economical design, it has a long service life. The perforated plate is made of 10 mm sheet steel with a 50 mm hole pattern. The pressure cylinders and abutments are self-locking. 5 plug-in hand hydraulic cylinders on a perforated plate with a built-in pump, 2000 kp pressure relief valve, 140 mm pressure plate width, 80 mm pressure plate depth, 60 mm cylinder stro ...

Key data: 500 mm, 200 mm

Magnetic clamping plate with sinusoidal ruler swivel device. Top condition! Dimensions : 500x200mm, Clamping: 110V - Made in Germany

On steel stand, total height 935mm Auction-ID: A1-48959-489

Plate dimensions: 4000 x 1500 x 80 mm incl. one groove with two tailstocks Tip height: 400 mm Auction-ID: A7-49089-143

Center height: approx. 200 mm Attention: without the measuring device shown in the photos Panel dimensions: 2000 x 400 x 250 mm incl. workshop cabinet as substructure Auction-ID: A7-49089-262

Panel dimensions: 2000 x 1500 x 300 mm incl. height gauge from the manufacturer MAHR Type: DIGIMAHR Auction-ID: A7-49089-137

On steel stand, total height 935mm Auction-ID: A1-48959-483

Professional clamping and fastening set for CNC machine tools consisting of a circular clamping plate with jaws as well as a large set of ground rulers and clamping elements. Ideal for machining centers, milling, mechanical manufacturing, industrial maintenance, precision tooling or adaptation of specific clamping systems. Interesting lot for mechanical workshops, industrial subcontractors, technical schools or dealers of production equipment. Content included according to photos. Auction-ID: A1-48554-414

1500 x 2500 surface plates complete with 2 feet cube not included Auction-ID: A1-48745-36

Panel dimensions: 6000 x 1000 mm incl. two grooves, one equipped with a digital display from the manufacturer HEIDENHAIN and one equipped with tailstock tips, tip height: approx. 3000 mm Length measuring device manufacturer TRIMOS STUDENROTH Auction-ID: A7-49089-254

Plate dimensions: 600 x 500 mm Measuring range of the height ripper: 600 mm Reference: Alesco - Lot 85 Auction-ID: A7-49882-52