plate used for sale

Plate heat exchange,stainless steel,plates for Sondex type 15-LS.

Plate heat exchanger,stainless steel,Sondex type S15/1G,26 plates

Plate heat exchanger,stainless steel,Pasilac type RMG 1070,42 plates

Plate heat exchangher,stainless steel,Alfa Laval type P01,70 plates

Plate heat exchanger,stainless acid proof steel,APV type H17 RKS-10 no.2,73 plates

Plate heat exchanger,stainless steel,APV type H17 R-6,29 plates

Akyapak AHS 8/10x2100 4 rolls plate rolling machine Machine is in good working condition

Plate heat exchanger,stainless steel,APV type H17 R-6,29 plates

Plate Heat Exchanger,stainless steel,Sondex type S15/1G,15 plates

Plate heat exchanger,stainless steel,Pasilac type H17 RK-6 no.1,17 plates

Plate heat exchanger,stainless steel,APV type H17 RK-6 no.1,23 plates

Plate heat exchanger,stainless steel,APV / Pasilac type 1070 EKSB

AGFA Imaging Plate System / CR System CR 30-X (for Veterinarian) Primary processing station 3 CR cassettes • Before taking over, all devices and systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in the "AS" condition from the warehouse Freiberg (EXW), Saxony, Germany, and pay in advance. • Sold as "Used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without warranty. • To restart the device, you will most likely need a license from the device manufacturer. • The installation, commissioning and configuration of the system or system components must be carried out by the manufacturer or by a specialist or technician authorized b ...

Plate heat exchanger,stainless steel,DDMM type 1070

Plate heat exchanger,stainless steel,APV type N35,13 plates

Plate heat exchanger,stainless steel,Alfa Laval type P2

Plate heat exchanger,stainless steel,Alfa Laval type M6

Plate heat exchanger,stainless steel,Alfa Laval type P0

Plate heat exchanger,stainless steel,APV H17,painted edge-clamped wall fitting

Plate heat exchnager,stainless steel,Alfa Laval P01,painted,edge-clamped. 7 plates

Plate heat exchanger,stainless steel,Alfa Laval P01,painted edge-clamped. 9 plates.

Plate heat exchanger,stainless steel,Pasilac type N35 MGS,102 plates

- Retaining plate MWM 12300186 - Suitable for several motors - Please note! Price per piece! - 12300186 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integrating ne ...

Durma HRB 4-3025 CNC Plate Rolling Machine Machine is in good working condition

Sahinler 4R HS 20-150 4 rolls plate rolling machine Working length : 2050 mm Machine is in good working condition

Used Faccin 2621 b3 Plate rolling machine Used machine visible in Italy, sold as it is

length: 9750 mm width: 4500 mm number: 9 T-slot - width: 32/48 mm T-slot - distance: 180 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The Palttenfeld consists of 9 plates, size per plate 3250x1500 mm, number of T-grooves per column 7, price 1000 €/m² The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 6000 mm width: 3250 mm number: 4 T-slot - width: 32/48 mm T-slot - distance: 180 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The Palttenfeld consists of 4 plates, size per plate 3250x1500 mm, number of T-grooves per column 7, price 1000 €/m² The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 130 mm x-travel: 6000 mm y-travel: 2000 mm Plate area: 9000x6000 mm digital readout: AEG total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Panel is optional and we charged extra The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Xiaojin grinder, type: JR130, plate diameter: 130 mm, total dimensions: 1200 mm x 1100 mm x 1600 mm.

length:1000 mm width:800 mm weight of the machine ca.:0,7 t dimensions of the machine ca.:1,0 x 0,8 x 1,4 m Hardstone measuring plate complete with FISCHER tailstocks and 4 leveling elements.

sheet width:3050 mm plate thickness:4 mm total power requirement:9 kW weight of the machine ca.:6 t dimensions of the machine ca.:3900 x H 1850 x T 2100 mm

length:1500 mm width:1000 mm weight of the machine ca.:0,2 t dimensions of the machine ca.:1,5 x 1 x 0,8 m Surface plate / Welding bench with underframe

stone measuring plate 400 x 400 x 50 mm ( 3 pieces available / price per piece )

Roll roller, plate roller, roller Model: Hydraulic Model: 4-Roller! Manufacturer: Chr. Haeusler (Switzerland) Type: VRM HY L4000x6 Working width: 4100mm Max. sheet thickness: 6mm (stainless steel) - 14mm (Alu) Top roller: 350 mm Other rollers: 250 mm Incl. conical bending Incl. hydraulic pull-back assist Machine weight: 23000kg Videos available for dismantling

Roll Roller Plate Roller Removable top roller Max. sheet thickness: 18mm Bottom roller diameter: 220mm Top roller diameter: 210mm

Pressing cylinder circumference: 1060mm, plate cylinder circumference: 240-1000mm, length: 8000mm, width: 1880mm, height: 1410mm, weight: 860mm.

length: 12000 mm width: 9600 mm number: 1 plate dimensions -w x h: 6000x2400 mm Thickness: 450 mm width of T-slots: 42/72 mm T-slot - distance: 300 mm number of T-slots: 8 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 130 mm x-travel: 7700 mm y-travel: 1500 mm Control: Siemens type: Sinumerik 840 C spindle taper ISO: 130 turning speeds: 1490 U/min power capacity: 45 kW chip conveyor: Angle head: Angle head: Plate area: 9000x6000 mm workpiece weight: 100 t One direction thrust bearing: total power requirement: kW dimensions of the machine ca.: m Panel is optional and we charged extra The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 12000 mm width: 6000 mm number: 1 plate dimensions -w x h: 6000x2000 mm Thickness: 350 mm T-slot - width: 36/60 mm number of T-slots: 8 T-slot - distance: 285 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

HEIDELBERG Nela Plate Bending suitable for HD SM 52 / 74 /102 and XL machines different years of construction available

HEIDELBERG Nela plate punch Suitable for HD SM 52 / 74 /102 and XL machines Hole spacing: 425 mm and 780 mm Various year of manufacture models available

Three roll plate bending rolls Overall dimensions: 1900 x 1400 x 1250 mm Roll width: 1000 mm

Specifications: - Length approx. 1500 mm - Width approx. 1000 mm - Plate thickness 100 mm - Table base made of angle iron - Table height approx. 790 mm - Weight approx. 1200 kg - Vice with jaw width 130 mm

KNITTING PLATE FOR ERIKA RECORD SZ.4 30 PCS. ( 3 pieces ) For fully and semi-automatic machines Erika Record Size 4very high-quality productmade of very durable plastic30 pieces5 mm thick40-120 grams per dough pieceDetails see picture 

Specifications: - Clamping surface approx. L 900 x D 600 mm - Table height 480 mm - Circulating water channel - 3 pieces T – grooves M 16 L 900 mm - side flange plate - Space requirement L 1000 x D 760 x H 480 mm - Weight approx. 300 kg

Manufacturer: CAMU Machine type: RM800/II 4429 Year of construction: 1999 Overall size: 1200 x 1600 x 1400 mm Max disk width: 700 mm Max plate thickness: 4,0 mm Electronic data: 380 V; 50 Hz

Clamping plate with several clamping holesSize 2750 x 1400 mmHeight 400 mmwith several clamping holes Drm. 40 and 50 mmused, from an operational resolutionin good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Directional plate made of cast ironDimensions: 1250 x 1000 x 210/55 mmWith- 4 adjustable feetused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

T-slot clamping plate made of cast ironDimensions:Length: 1600 mmWidth: 1200 mmHeight: 200 mmWeight approx: 1400kgWith- 7 transverse T-slots 26/48xa0xa0 Distance 100/200 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools