plate shears used for sale

Punching capacity 28x13 mm, flat steel shear capacity 300x10 mm and 200x13 mm, angle steel shear capacity 80x80x8 mm, round steel shear capacity 30 mm, square steel shear capacity 30 mm

Hand lever shears Pagus 1 BR/6 Sheet thickness: 4 mm Knife length: 180 mm Dimensions: 400x100x1500 Year of construction 1995

Weight approx. 12000-15000 kg, cutting capacity for steel 16 mm, cutting capacity for stainless steel 10-12 mm, adjustable back gauge

Profile steel shears, hand lever shears SCHERENBAU NOSSEN ScDH 10 Knife length: 180 mm round: 24 mm square: 22 mm angle: 60 x 7 mm continuous: 10 mm drivable ! used, tested ! Dimensions: 1300 x 700 x 1600 mm

sheet width: 1550 mm plate thickness: 3 mm total power requirement: 3 kW weight of the machine ca.: 1600 kg dimensions of the machine ca.: 2.060 x 1.140 x 1.210 mm Producer: OSTAS Type: RGM 1050 x 3 YOM: new Max. Shearing Length: 1.050 mm Shearing Capacity: 3 mm Shearing Angle: 2°30 Strokes Per Minute: 35 d/d Motor Power: 3 kW Table Width: 510 mm Table Height: 820 mm Rear Gauge Distance: 500 mm Dimensions of the machine (LxWxH): 1.640 x 2.060 x 1.210 mm Weight: ca. 1.100 kg Additional information: • Manual backgauge with 500 mm stroke • Squaring arm with T-slot, stopper and ruler • Foot pedal • Front sheet holding arms • Cutting line lighting • Protection Cages optional: • Cutting unit counter • Motorised backgauge with 500 mm stroke • Backgauge with NC control • Pneumatic Sheet Support System • Optical security bar • 0-180° angle cutting The data for thi ...

Key data: 2040 mm, 3 mm

Max. cutting length: 2040 mm Max. sheet thickness: 3 mm steel Manual backgauge up to 500 mm Side stop and table extensions Knife sharpened 2300 kg

Key data: 1250 mm, 13 mm

1250 x 13mm Hydraulic shear

Hand lever scissors, mounted on concrete base, see pictures Sheet width - max. 200 mm Sheet thickness 6 mm Jxdh33 Flat steel 70 x 7 mm Round steel 13 mm

Mechanical Sheet Metal Shears HSK/W Small mechanical slag shears Capacity 1030×2.5mm With electric rear and forward stop With extra knife Can be viewed under power

The JMC 407 is the top seller among our alligator scissors. It is cost-effective, has a sufficient blade length and enough power for most metal recycling tasks. It is suitable for cutting many materials, such as profiles, pipelines, motors, cables or gearbox housings. The shears are also often used for cleaning scrap metal or cutting vehicle radiators. The machine has a control system without electronics and a manually adjustable hold-down device, which also acts as a protective cover. Using the foot pedal, the scissors can be used in single or continuous operation. The opening width can be adjusted using simple clamping screws. The scissors are from our demonstration pool and can of course be viewed or tested. Further information at BPS Recyclinganlagen GmbH at infoRecyclinganlagen.info

Max. sheet thickness: 2 mm steel Max. blank diameter: 1000 mm Motorized drive via foot switch

Haco HSL 4100 x 12 mm Cutting length: 4100 mm Max sheet thickness st 45: 12 mm Strokes/min: 7 > 11 str/min Adjustable cuttingedge: 0,5 > 3° Length: 4900 mm Depth: 2180 mm Height: 2250 mm Weight: 11 ton Number of sheet holders: 23x

Bombled 2100 x 4 mm Max sheetthickness: 4 mm Cuttinglength: 2100 mm Strokes/min: 33 str/min Electric motor (power): 5,5 kW Length : 3500 mm Depth : 1500 mm Height: 1100 mm Weight: 3100 kg

LVD MVB 3100 x 6 mm Cutting length: 3100 mm Max sheet thickness st 45: 6 mm Passage between uprights: 3300 mm Strokes/min: 18 > 60 str/min Backgauge: 750 mm Adjustable cuttingedge: 0,5 > 2,0° Electric motor (power): 7,5 kW Weight: 6 ton

Specifications: Maximum cutting width: 2050 mm Maximum cutting capacity steel: 0.5 - 4.0 mm Adjustable rip fence: 1050 mm Retraction function Cutting gap adjustment Working height: 1030 mm Dimensions (length x width x height): approx. 2500 x 1900 x 1750 mm Weight: approx. 3,6 tons

sheet width: 2500 mm plate thickness: 12,5 mm distance between columns: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Width of metal, max. 2,500 mm Metal thickness, max. 12.5 mm Weight, approx. 19,000 kg Drive 40 kW Equipment / Special Features: Adjustment of cutting gap. Hydraulic blank holder. Automatic arrester adjustment for cutting blanks. Program input and piece number input. Transportation device for blanks. Stacking device. This is an ideal machine for cutting lots of small blanks out of large pieces of sheet metal. Machine is equipped with a complex stacking device on the back of the machine. This is a heavy and rigid machine. Condition : Good to very good. Machine can soon be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. Thank you for your interest. The data for th ...

Specifications: Max. cutting width: 3100 mm Max. cutting capacity for normal steel: 0.4 - 6.0 mm Max. cutting capacity for stainless steel: 4.0 mm Max. cutting capacity for aluminium: 8.0 mm Adjustable rip fence: 1050 mm CNC control Cutting gap adjustment via control Cutting angle adjustment via control: 0.4 – 2.2° Retraction function Sheet metal holding function Stroke rate: 33 cuts Min. Motor power: 5.5 kW Dimensions (length x width x height): approx. 3800 x 2300 x 1950 mm Weight: approx. 6,5 tons

Specifications: Maximum cutting width: 3100 mm Maximum cutting capacity steel St40: 10.0 mm Cutting gap adjustment adjustable rip fence Motor power: 15 kW Dimensions (length x width x height): approx. 3900 x 1950 x 2150 mm Weight: approx. 9,5 tons

sheet width: 5 mm plate thickness: 1000 mm distance between columns: mm total power requirement: 4 kW weight of the machine ca.: 2,8 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Specifications: Maximum cutting width: 3050 mm Maximum cutting capacity steel: 10.0 mm Cutting gap adjustment Cutting angle adjustment adjustable rip fence Dimensions (length x width x height): approx. 3500 x 2500 x 2050 mm Weight: approx. 9,5 tons

sheet width: 1550 mm plate thickness: 3 mm distance between columns: 1600 mm back stop - adjustable: 600 mm connected load: 3 kW weight of the machine ca.: 1,1 t dimensions: 2,06 x 2,14 x 1,21 m Demonstration machine with small paint damage. The machine works quietly and is powered by its geared motor Braking system energy-saving. Our machine is welded as a monobloc body from ST42 quality material. The knives of the machine are of 2379 quality and the brand name is BOHLER. These high-quality knives guarantee precise cutting. Emergency stop button, foot switch and finger guard are included standard equipment. (Documentation in English only) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Overhauled: 1999 Shear force: 2000KN Cycle rate: 59/min Achievement; Round steel up to D 63 mm, square steel up to 55 mm Machine weight: 7350 kg Dimensions:2260 x 2920 x 1770 mm Hewvu Nev Ta Ucju Isk Bar feeder with separation: Max. pole length: 6m Dimensions: 6.3 x 1.75 x 2.25 m Weight: 4000 kg Machine is still energized.

sheet width: 1050 mm plate thickness: 3 mm distance between columns: 1100 mm back stop - adjustable: 600 mm connected load: 3 kW weight of the machine ca.: 1,1 t dimensions: 1,7 x 2,1 x 1,3 m The machine works quietly and it is energy-saving by its gear motor and brake system. Our machine is manufactured as steel construction monoblock body welded from ST42 quality material. The blades on the machine are of 2379 quality and the brand’s name is BOHLER. These high-quality blades ensure quality and precise cutting. Emergency stop button and finger guard grill are standard equipment of foot pedal machine. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2050 mm plate thickness: 3 mm distance between columns: 2100 mm back stop - adjustable: 600 mm connected load: kW weight of the machine ca.: 1,1 t dimensions: 2,7 x 2,1 x 1,4 m The machine works quietly and it is energy-saving by its gear motor and brake system. Our machine is manufactured as steel construction monoblock body welded from ST42 quality material. The blades on the machine are of 2379 quality and the brand’s name is BOHLER. These high-quality blades ensure quality and precise cutting. Emergency stop button and finger guard grill are standard equipment of foot pedal machine. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Shredder UNTHA RS-100 Main shaft speed: 17.3 rpm Auxiliary shaft speed: 28.0 rpm Chopping discs width: 38 mm Drive power 2x55 kW 400 V, 50 Hz Screen perforation round: Ø 25 mm and 80 mm Total weight without base: approx. 12,000 kg Control cabinet with wiring : complete Incl. funnel + pusher and base frame clean machine, checked, always maintained, 1 owner !

Offer 24236 Specifications: - max. working width 2550 mm - max. cutting capacity St 40 4.0 mm - Cutting angle 1.30 ° - Positioning-controlled back gauge 20 - 750 mm - Front angle stop + support arms - E. footswitch - Stroke rate up to 34 rpm depending on cutting length - Drive 400 V / 3 kW - Table height approx. 850 mm - Space required including back gauge, without front support arms -ca. W 3250 x H 1250 x D 2000 mm - Weight approx. 3500 kg

used barrier scrap shears Manufacturer: Schlüter Type: BS 1 Year of Make: 1973 specifications: Performance with a material strength of 40 kp/mm²: Round bar: up to 40 mm Square bar: up to 35 mm Sheets: up to 15 mm Pipes up to 6 mm wall thickness: 300 mm Railway sleepers: all normal grades Angle iron: 100 x 100 x 10 mm Knife Dimensions: Knife length: 600 mm Knife opening front: 310 mm Knife opening rear: 140 mm Cutting rate: 30/min. Drive power: 7.5 hp / 5.5 kW Dimensions: Length: approx. 4,000 mm Width: approx. 1,400 mm Height: approx. 2,000 mm Weight: approx. 3,600 kg Description of the machine: Due to the extremely large blade opening, it is particularly suitable for light, bulky scrap. It is designed in a mobile version with drawbar and has a shear coupling as extensive protection against overloading. High ...

Key data: 4100 mm, 13 mm, 4100 mm

Working length: 4,100 mm Cutting capacity: 13 mm Back gauge: 1,000 mm Director: Darley Delem Equipped with: - Trailer arms 4000 mm long - Foot pedal - Material discharge roller conveyor - Extra set of knives -Documentation Country of origin: Netherlands Motor power: 30 kW Machine LxWxH: 440 x 235 x 225 cm Machine weight: 18,400 kg

Combined profile steel shear and hole punch GEKA type HYD 80 / Hydracrop 80/AMasch. No. 9566 Year of construction approx. 2000Punching force 80 ton. Projection 300 mmPunching up to 40 mm in 14 mm sheet metalFlat material shears 450 x 15 mmAngle steel shears 130 x 130 x 13 mm4 edge shears 45 x 45 mmRound material shears 45 mmRectangular clinker up to 12 mmMotor power 5.5 kWNeching connection 400 volts, 50 Hz stop with el. Stroke release 500 mm - work table with stop at the hole device 550 x 380

Motor-driven circular shears FASTI type 502 - 10 - 2Masch. No. 9252 009 Year of construction 1992Material thickness max. 2 mm (400N/mm²)Maximum blank diameter 1000 mmMinimum blank diameter 100 mmCutting shaft speed 60 and 120 rpmCutting speed 12 and 24 m/min. Knife holder 20 mmKnife diameter 65 mmProjection of the clamping plate 720 mmProjection of the cutting wheel 280 mmMotor power 1.1 / 1.4 kWWeergized connection 380 volts, 50 Hz- 2 motor speeds- mechanical clamping tip-

LVD HST 3100 x 6 mm Cutting length: 3100 mm Max sheet thickness st 45: 6 mm Strokes/min: 7 -> 35 str / min Adjustable cutting device: 0,05 > 0,8 Adjustable cuttingedge: 0,5 > 2,5° Electric motor (power): 9,5 kW Length: 4110 mm Depth: 1820 mm Height: 1850 mm Weight: 5,5 ton

SC7 CNC-besturing: - automatische snijhoek - mes spel automatisch - automatische achteraanslag Cutting length: 3100 mm Max sheet thickness st 45: 16 mm Strokes/min: 5 > 10 str/min Backgauge: CNC - 1000 mm Adjustable cuttingedge: 0,5 - 4°30´ Electric motor (power): 37,5 kW Length: 4160 mm Depth: 2220 mm Height: 2450 mm Weight: 12 ton

sheet width: mm plate thickness: mm distance between columns: mm digital: working width: 4500 mm : 8mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Type: 82.25 Max sheetthickness: 2 mm Cuttinglength: 2540 mm Electric motor (power): 3 kW Weight: 1600 kg

Brand: Jwell Cutting width: 1440 mm Capacity: up to 6mm thick Geared motor: 7.5 hp (5.5 kW) Type: Mechanical Guillotine

Description Guillotine Shears Hera HSS-5 Details Machine no. 511 Year of construction 1982 Cutting capacity 10 mm to 2m width with spare blade

electric shears for metal sheets

Key data: 650 mm

Foot lever shears for metal sheets

Key data: 3050 mm, 6 mm

3000 x 6mm Elgo P50 Rear sheet supports

Key data: 3100 mm, 6 mm

Hinged backgauge, manual cutting gap adjustment, lighting, cutting length adjustment, Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out. Sheet width: 3100 mm Sheet thickness steel: 6.0 mm Sheet thickness front: 4.0 mm Colour: grey/blue Total power requirement: 11 kW Machine weight: 900 kg Dimensions: 4000 x 2150 x 1640 mm Cutting gap adjustment: 0.05 -0.80 mm Hold-down: 14 Stroke rates per minute approx.: 19 stroke/min Cutting Angle: 1.2 Adjustable back gauge Back gauge: 1000 mm Machine number: SN20080583

sheet width: 3100 mm plate thickness: 6,0 mm thickness at Niro-steel: 4,0 mm distance between columns: 3100 mm down holder: 14 Stück oil volume: 150 ltr. cutting angle: 1,2 ° no. of strokes: 18 Hub/min control: CYBELEC CybTouch total power requirement: 11,0 kW weight: 6300 kg range L-W-H: 4.000 x 2.100 x 1.640 mm -------------------------------------------------- electr. / hydraulic CNC swing cut shears with CYBELEC CNC touch screen control with electr. / hydr. Kerf adjustment -------------------------------------------------- Furnishing: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 Backgauge preselection - X axis Cutting gap adjustment Quantity Cutting length limitation Material preselection, including sheet thickness Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) on ball screws autom. Can be fol ...

sheet width: 1050 mm plate thickness: 2,0 mm distance between columns: 1050 mm down holder: 1 Stück fence: Tisch 80 - 480 mm fence: Breiten 0 - 600 mm table-size: 1300 x 600 mm work height max.: 760 mm total power requirement: manuell kW weight of the machine ca.: 413 kg. range L-W-H: 2,0 x 1,04 x 1,6 m - Including adjustable stop on the work table for miter cuts - The knife can be lifted easily thanks to the counterweight on the back - Large work table for safe placement of the sheet metal plates - Sheets can be pushed through, i.e. longer sheets can be cut - Handwheel on the front to adjust the back gauge - Comes with a robust cast iron base as standard - Long service life thanks to knives made of quality steel - Standard with hold-down device including quick-release clamp - Robust machine construction for high stability Furnishing: - manual lever shears - stable execution - hold-down ...

Key data: 4000 mm

Ref.Nr. 00883 Name of the system: Used guillotine shears Manufacturer I.MA. L Model CESO1A Speed 64 Year of construction 2003 Working range 4m Dimensions 3700 x 1950 x 2100 mm Weight 8500 kg Press safety test according to BGR 500 lt test report. Next exam in January 2026

sheet width: 3100 mm plate thickness: 6,0 mm distance between columns: 3.100 mm down holder: 14 Stück no. of strokes: 16 - 24 Hub/min oil volume: 150 ltr. cutting angle: 0,5 - 1,5 ° thickness at Niro-steel: 4,0 mm column arm: 350 mm engine output: 11,0 kW weight of the machine ca.: 7.060 kg range L-W-H: 4100 x 2200 x 2190 mm -------------------------------------------------- electr. / hydraulic CNC guillotine shears - guided by a backdrop with CYBELEC CNC touch screen control with electr. / hydr. Cutting gap and cutting angle adjustment -------------------------------------------------- Furnishing: - CNC guiding guillotine shears - with electr. / hydr. Cutting gap and cutting angle adjustment - CYBELEC CNC touch screen controller, model CybTouch 8 Backgauge preselection - X axis Cutting gap adjustment Number of pieces Cutting length limitation Material preselection, including s ...

sheet width: 3100 mm plate thickness: 13,0 mm thickness at Niro-steel: 8,0 mm down holder: 14 Stück no. of strokes: 11 - 20 Hub/min oil volume: 310 ltr. cutting angle: 0,05 - 2,0 ° throat: 350 mm table height: 900 mm total power requirement: 22,0 kW weight of the machine ca.: 13.300 kg range L-W-H: 5.110 x 2.570 x 2.400 mm -------------------------------------------------- heavy electr. / hydraulic CNC guillotine shears - guided by a backdrop with CYBELEC CNC touch screen control with electr. / hydr. Cutting gap and cutting angle adjustment -------------------------------------------------- Furnishing: - CNC guillotine guiding shears - with electr. / hydr. Cutting gap and cutting angle adjustment - CYBELEC CNC touch screen controller, model CybTouch 8 Backgauge preselection - X axis Cutting gap adjustment Number of pieces Cutting length limitation Material preselection, includi ...

sheet width: 3100 mm plate thickness: 13,0 mm thickness at Niro-steel: 8,0 mm down holder: 14 Stück no. of strokes: 11 Hub/min oil volume: 310 ltr. cutting angle: 2,0 ° throat: 350 mm table height: 900 mm total power requirement: 22,0 kW weight of the machine ca.: 12200 kg range L-W-H: ca. 4100 x 2300 x 2235 mm -------------------------------------------------- heavy electr. / hydraulic CNC swing cut shears with CYBELEC CNC touch screen control with electr. / hydr. Kerf adjustment -------------------------------------------------- Furnishing: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 Backgauge preselection - X axis Cutting gap adjustment Number of pieces Cutting length limitation Material preselection, including sheet thickness Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) on ball screws autom ...

sheet width: 3100 mm plate thickness: 10,0 mm thickness at Niro-steel: 6,0 mm down holder: 14 Stück no. of strokes: 13 Hub/min oil volume: 260 ltr. cutting angle: 2,0 ° throat: 350 mm engine output: 22,0 kW back stop - adjustable: 1.000 mm weight: 10.575 kg. range L-W-H: 4,05 x 2,5 x 2,17 m -------------------------------------------------- heavy electr. / hydraulic CNC swing cut shears with CYBELEC CNC touch screen control with electr. / hydr. Kerf adjustment -------------------------------------------------- Furnishing: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 Backgauge preselection - X axis Cutting gap adjustment Quantity Cutting length limitation Material preselection, including sheet thickness Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) on ball screws autom. Can be folded up at max.trav ...

pressure: 60,0 t square edge steel: 35,0 mm round bar steel: 40,0 mm L-beam: 120x120x12 mm punching cross-cut in cmm: Ø28 in 15 / Ø38 in 11 mm throat: 220 mm flat steel: 200x20 / 300x15 mm blade length: 317 mm oil volume: 45,0 ltr. work height max.: 940 / 1140 mm strokes per minute: max. 26 work stroke: 55,0 mm total power requirement: 4,0 kW weight of the machine ca.: 1425 kg. Dimensions (HxWxD): 1510 x 590 x 1570 mm Furnishing: - Support table at the hole punch - Support table on the square notcher - foot switch - Bed. Instructions - CE declaration + MUBEA - punch and die holder The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.