plate shears used for sale

Panel shears Sheet metal scissors used Manufacturer: RAS / REINHARDT Maschinenbau Type: 82.20 Cutting width max. 2040 mm Sheet thickness max. 2 mm 380 V Dimensions approx. 2500 x 1500 x 1100 mm Changes and errors in the technical data, information and prices as well as prior sale reserved.

Plate shears Cutting capacity 1 mm Cutting width 1.10 m Foot operation, the cross step is missing.

offer 22501 Technical data approx.: - working width 1020 mm - material thickness at 40 kg/mm² strength 1.5 mm -one. Backgauge adjustable up to 550 mm - front angle stop - Sheet metal hold-down - Table size 1100 x 650 mm - Working height 900 mm - Space requirement approx. W 1800 x H 1450 x D 850 mm - Weight approx. 400 kg -mobile

Hand lever scissors, hand tin snips, tin snips, sheet metal snips -Shears: 200 mm -Dimensions: 350/100/H710 mm -Weight: 17.6 kg

guillotine shears AG TS 2 Working thickness 2mm Adjustable stop Hold Length 1.80 m Width 1 m Height 1.40 m Weight 300 kg

Hydraulic. guillotine shears, used, ready for demonstration hydraulic plate shearer, used , ready for operation Typ / type: 252.6000.4 Fabr./ make: Helmut Lotze Baujahr/ year: 1995 Lager-Nummer / Stock number: 0989 Blechstärke bei größte Blechbreite/ thickness at max. cutting length: 4 mm Schneidbreite/ cutting length: 6040 mm Weight: approx. 22 t Specification: Hinteranschlag / backstop Rollablage / Roller tray

Concrete pulverizer, concrete tongs, attachment used for excavators. Manufacturer: MUTLEY Type: C116 with quick coupler Total approx. 3000 x 750 x 1300 mm The device comes from a warehouse liquidation and is probably unused. Subject to changes and errors in the technical data, specifications and prices as well as prior sale.

Recycling machine trade AGICOM-Pedergnana OG: The battery-powered cutter has been specially designed for applications where more freedom of movement is required, to carry out cutting operations in hard-to-reach places or when it is important that the cutter must be ready for use in standby mode in case of emergency. Battery-powered cutters are made of high-quality aluminum. The HOLMATRO cutter model ICU 10 A 10 is particularly suitable for cutting telephone cables, underground cables, electrical cables and steel cables. Specifications: Maximum cutting force: approx. 242 kN, approx. 24.7 tons Maximum opening width: 115 mm Maximum operating pressure: approx. 500 bar Dimensions: L 737 x W 222 x H 177 mm Weight: 17.3 kg

used mobile scrap shears 400 t shear force, 8-12 t throughput, drive by completely overhauled Perkins diesel engine 90 kW, simple Tier III engine with common rail, mount with hook vehicle. Weight 25 t. Shear is professionally overhauled and ready for operation, future spare parts supply and service is ensured. 6 months warranty.

Key data: 3100 mm, 6 mm

Working length: 3100 mm Cutting capacity: 6 mm Backgauge range: 750 mm Equipped with: - 3 sheet metal support arms - Rear access protection - Foot pedal Engine power: 11 kW Machine LxWxH: 3750 x 2350 x 1850 mm Machine weight: 5500 kg

Hand lever scissors, hand tin snips, tin snips, sheet metal snips -Hand lever shears -Material thickness: max. 2 mm -Blade length: 200 mm -Dimensions: 790/540/H1715 mm -Weight: 28 kg

Replacement knife for table shears, replacement blades, cutting knives, shear knives -Dimensions: 79 x 19 mm -Lengths: 2x 1055 mm -Hole spacing: 50/238 mm -Bore: 17 mm countersunk -Price: complete -Weight: 24 kg

Profile steel shears, hand lever shears, hand sheet metal shears, sheet metal shears, sheet metal shears -Scissors: 185 mm -cutting: 40 mm angle iron -cutting: Ø mm round steel -Dimensions: 460/985/H2220 mm -Weight: 88 kg

Hand lever shears, hand tin snips, tin snips, sheet metal snips -Scissors: 100 x 5 mm -Dimensions: 280/100/H980 mm -Weight: 10 kg

Cutting lenght 6000 mm Cutting thickness 13 mm

Key data: 630 mm

Manual Tin Shears / Guillotine Shears with Table - Heavy-duty design - Adjustable front stop 360 mm - with table and runway Specification - Max. cutting length: 630 mm - Table dimensions WxD: 630 x 540 mm - Front stop: 360 mm - Dimensions WxHxD: approx. 1000 x 1200 x 2000 mm - Weight: approx. 300 kg

Long-blade sheet metal and round steel shears -Sheet metal shears: sturdy -Material: Flat steel -Round: up to 15 mm -Square: up to 15 mm

Offer 23443 Specifications: - max. working width 1250 mm - max. cutting capacity St 40 3 mm - Cutting angle 2.30° - Cutting gap adjustment by hand - Projection 200 mm - Man.- Back gauge 10 - 500 mm - Drive 400 V / 2.2 kW - Table height approx. 800 mm - Space requirements incl. back gauge -ca. W 1850 x H 1200 x D 1450 mm - Weight approx. 1700 kg

Hydraulic Shear HACO HS 3010 Capacity: 3000 x 10 mm Back gear gauge travel: 1000 mm Year of construction: 1983 Manual adjustment of the clearance between blades Cutting angle: 1° to 3° Voltage: 380 V Dimensions (L x W x H): 4000 x 2100 x 2200 mm Weight: approx 8 T

Working length: 1020 mm Sheet power max.: 3.5 mm Dimensions (WxDxH), approx.: 1640 x 1860 x 1390 mm

- Rotor shears type MEWA UC 201 - Electric drive 2 x 75 kW - Rotor length: approx. 2 meters - Width of the blades: 70 mm - Weight approx. 50 tons - Incl. chain belt conveyor for discharging the product

Combined CNC – controlled press brake / sheet metal shears Super compact machine with a very small footprint. Maximum cutting length 3,020 mm Nominal cutting capacity 6 mm sheet steel/ST 40 Cutting angle 1°30" 17 pieces of sheet metal hold-down, Ø hold-down plate 50 mm NC – controlled back gauge for guillotine shear station - adjustment range 750 mm Table height 750 mm. Maximum bending length between the side stands: 3,440 mm (column passage 3,550 mm) Maximum pressing force 1,000 kN Working height bending only 1,230 mm Lifting range bending station 170 mm Maximum installation height of the bending station is 250 mm (press beam surface in the lowest position), the backgauge adjustment range for the bending station is 750 mm. Dimensions including operating pendulum 4.25 m x 1.82 m x H 2.8 m Footprint 3.85 x 1.82 m Drive power 10 kW Weight 9,000 kg Equipment: ...

sheet width: 3000 mm plate thickness: 3 mm weight of the machine ca.: t 3 support arms 1 angle stop pneumatic hold-down device Backgauge to be operated by hand The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

LASER PRIMA INDUSTRIE Mod. 2D/3D DOMINO Year 2006 1500x3000 2.5 kw 22,000 working hours Visible in operation No loading and unloading

Hand lever shears, long-blade sheet metal and round steel shears, lever shears -Hand lever shears: Sheet metal and round steel shears -Cutting insert length: 200 mm -Round steel: up to 15 mm -Overall dimensions: 460/160/H1230 mm -Transport dimensions: 1000/160/H440 mm -Weight: 23 kg

Hand lever shears, long-blade sheet metal and round steel shears, lever shears -Hand lever shears: Sheet metal and round steel shears -Cutting insert length: 200 mm -Overall dimensions: 380/160/H1160 mm -Transport dimensions: 830/160/H500 mm -Weight: 25 kg

Hand lever shears, long-blade sheet metal and round steel shears, lever shears -Hand lever shears: Sheet metal and round steel shears -Cutting insert length: 300 mm -Round steel: up to approx. 17 mm -Overall dimensions: 500/145/H1325 mm -Transport dimensions: 1000/145/H450 mm -Weight: 38 kg

Specifications: - Max. working width 3040 mm - max. material thickness 4 mm - Manual cutting angle adjustment - Stroke rate up to 34 1/min - Backgauge with positioning control Pos100 - Table height approx. 850 mm - Front angle stop - 2 front support arms - Rear space protection with light barrier - E-foot switch - Pneumatic connection 6 bar - Drive 400 V - Space requirement without support arms approx. W 4000 x H 1400 x D 2100 mm - Weight approx. 4700 kg

CAPASITY 60 T

Key data: 3000 mm, 3 mm

with automatic hold-down device POS 100 E Control for Motorized Backgauge Single-angle stop 2 front support arms adjustable on linear rail Manual cutting gap adjustment 0.5 - 3 mm a sheet metal transport and stacking device is attached under the fence for transporting and depositing the cuttings Compressed air connection required Security fencing and light barrier available Adjustable back gauge 8 - 1000 mm Colour: grey/blue Total power requirement: 32 A with cutting gap adjustment without cutting angle adjustment Power: 3000x3.0 mm, 4.0 mm aluminum, 1.5 mm stainless steel Dimensions: 4000 x 1600 mm Weight: 4000 kg Machine number: 200034 Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out.

Key data: 4040 mm, 2 mm

Motorized guillotine shears, with front-adjustable handle, sheet metal depositing to the front Sheet width: 4040 mm Sheet thickness steel: 2.5 mm Sheet thickness aluminum: 4.0 mm Sheet thickness stainless steel 1.5 mm Colour :grey/blue: Total power requirement :32 A Machine weight :3350 kg Dimensions: 4585 x 2592 x 14300 Cutting gap adjustment: manual Automatic hold-down Angle stop :1000 mm Cutting angle: > 1.11 degrees Adjustable back gauge: 0 - 750 mm

Hand lever shears, lever shears, long-blade sheet metal and round steel shears, sheet metal shears, profile steel shears -Manufacturer: Steel, lever shears, sheet metal shears with stable base -Cutting length: approx. 325 mm -Overall dimensions: 840/560/H2075 mm -Total weight: approx. 131 kg

YAWEI L6SK 6X2500 guillotine shears, built in 2012 in China, are designed for precision cutting of steel sheets with a maximum length of 2500 mm and a thickness of 6 mm. Technical specifications of YAWEI L6SK 6X2500 guillotine shears - maximum sheet metal thickness: 6 mm - maximum sheet metal length: 2500 mm - installed power: 13 kVA - power supply: 3x 400 V; 50 Hz

Cutting lenght 6100 mm Cutting thickness 16 mm

Mechanical Shear BOMBLED type 9G Capacity: 2500 mm x 4 mm Manual Back gear gauge travel: 500 mm Supplied with 2 front length stops Voltage: 380 V Dimensions (L x W x H): 4000 x 1500 x 1500 mm Weight: approx 4,5 T

sheet width: 2040 mm plate thickness: 3,00 mm distance between columns: mm total power requirement: kW weight of the machine ca.: 2,30 t dimensions of the machine ca.: m Manual back stop up to 500 mm Side stop and table extensions Knives sharpened The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

1. Qty. 1 Second-hand slitting line Mfc.: DANIELI WEAN UNITED, LOOPCO, Built: 1994 Relocated: 2021 Raw Material CR, GI, COLOR COATING COIL Strip Width: 400 - 1,210 mm Thickness: 0.5 - 1.8 mm Slitter Stand (OD420 x ID255 10/15T=Each 30EA) Scope of supply: Uncoiler Coil Car with Coil Skid Uncoiler with Snubber Roll Coil Opener & No. 1 Pinch Roll Crop Shear Threading Table No. 2 Pinch Roll & Side Guide Slitter Stand Scrap Winder Loop Table Tension Pad with Separator Bridle Roll with Guide Table Recoiler with Separator Recoiler Coil Car with Coil Skid Hydraulic Equipment Electric Equipment 2. Qty. 1 Second-hand cut-to-length line Mfc.: DONGBU ENG Built: 1997 Relocated: 2021 Raw Material CR, GI, COLOR COATING COILS Strip width: 600 – 1540 mm Thickness: 0.5 - 2.0 mm Coil Weight Max. 15,000 Kg Sheet Length: 500 - 2,800 mm Scope of supply: Coil Car Unco ...

Type of saw / pincer Height 1000 mm Width 1200 mm Length 800 mm Power supply: 400V 50Hz 3N Main Material Stainless steel, acid-resistant A set for cutting pork cross bones. The set includes: -Scissors - Hydraulic power unit - Balancer -Sterilizer

for round diameters 70 - 1500 mm Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out. Working width: 1000 mm Sheet thickness steel: 1.5 mm Machine weight: 150 kg Dimensions/: 1200 x 800 x 1200 mm Colour: blue Projection: 350 mm Machine number: 4447

Offer 24454 Specifications: - Max. cutting width 2520 mm - Max. cutting capacity at 45 Kp/mm² 4 mm - Cutting angle 1°15 - Projection 200 mm - Stroke rate up to 30 /min - Front angle stop 1100 mm - Front support arm 400 mm -Mot. Back gauge 5 - 600 mm - Cut line illumination - Sheet metal hold-up - E – footswitch - Drive 400 V / 7.5 kW - Space requirement approx. W 3750 x H 1650 x D 2100 mm - Weight approx. 3.8 t

Scissors, pneumatic scissors, air cutters, wire cutting scissors -Manufacturer: nile, pneumatic wire cutting shears for face mask machines -Type: AM10 -Cutting length: approx. 46 mm, see photo -Quantity: 8 pairs of scissors available -Price: per piece -Overall dimensions: 220/35/H35 mm -Weight: 0.4 kg/pc.

Reinforcing steel shear, reinforcing steel cutting machine, construction steel shear, profile shear, punch, punching machine -Manufacturer: L & L, steel shear with chassis -Type: FM1001 -Drive: 1.5 kW motor -Cutting width: 20 mm -Cutting height: 100 mm -Dimensions: 1160/500/H765 mm -Weight: 334 kg

Scissors, pneumatic scissors, air cutters, wire cutting scissors -Manufacturer: OPT, Replacement blades for pneumatic shears, 4 pieces -Type: 100S -Cutting length: see photo -Submission/Price: complete -Dimensions: 120/45/H35 mm -Weight: 0.1 kg/pc.

Scissors, pneumatic scissors, air cutters, wire cutting scissors -Manufacturer: OPT, Air cutter, Pneumatic wire cutting shears -Type: AM-10 -Cutting blade: OPT cutting length approx. 46 mm, see photo -Quantity: 1 pair of scissors available -Overall dimensions: 210/35/H40 mm -Weight: 0.3 kg

AGICOM recycling machine trade: Small alligator shears JMC 150 overhauled by the manufacturer, benchtop device, ready for immediate use! Manufacturer: Mc Intyre Knife length: 150 mm Knife opening: 105 mm Cutting capacity: 25 tons Dimensions ( L x W x H ): 660 x 520 x 620 mm Weight: 150 kg Drive: 1.5 kw / 230 Volt Operation: Foot pedal

Offer 24482 Specifications: - Max. working width 1020 mm - Max. material thickness 4.0 mm - Cutting angle 2.4 ° - Single stroke – continuous stroke can be preselected -one. Back gauge up to 700 mm - Front angle stop - Front pull-out sheet metal support - Drive 400 V / 3.4 kW - Space requirement approx. W 1450 x H 1180 x D 1400 mm - Weight approx. 900 kg

Hydraulic tank cap, tank cap -Hydraulic tank cover: from Atlantic ATS 3006 plate shear -Item No.: HMG 400 x 1 H -Dimensions: Ø 440 x 70 mm -Weight 14.5 kg

Hand lever scissors, hand tin snips, tin snips, sheet metal snips -Scissors: 180 x 4 mm -Dimensions: 800/400/H900 mm -Weight: 60 kg

Hand lever scissors, hand tin snips, tin snips, sheet metal snips -Scissors: 240 x 4 mm -Handover in its current condition as inspected -Dimensions: 400/150/H1200 mm -Weight: 46 kg

TIMAC TZZ-1604 circular disc shear/cutter with automatic double station stacker. Year 2018 Reviewed, ready for production. Automatic circular cutter for disc production from coil or strip, equipped with a double station automatic stacker that allows continuous work without stops. Especially suitable for the manufacture of bottoms and lids, circular pieces and blanks for drawing or stamping processes. Key features -Circular cutting using adjustable blades -Diameter adjustment system for different disc formats -Automatic double station stacker -Suction cup arm for collecting each disc -Possibility to remove entire stacks without stopping production -Doors with latches and safety interlocks -Integrated electrical and pneumatic system -Independent electrical panel -PLC control -Safety in accordance with CE regulations Main technical data -Sheet thickness: -Up to 3mm (car ...