plate shear used for sale

Defective. Auction-ID: A1-45188-144

Auction-ID: A3-43511-20914

Hand strip shear on trestle stand Auction-ID: A1-45187-224

plate thickness:4 mm blade length:180 mm weight of the machine ca.:21 kg dimensions of the machine ca.:400 x 100 x 1500 mm

Maximum capacity 0.5 mm; working width 600 mm; adjustable backgauge; hand-operated;

with foot control

Punching capacity 28x13 mm, flat steel shear capacity 300x10 mm and 200x13 mm, angle steel shear capacity 80x80x8 mm, round steel shear capacity 30 mm, square steel shear capacity 30 mm

Defective.

With 2x safety wire panel

Weight approx. 12000-15000 kg, cutting capacity for steel 16 mm, cutting capacity for stainless steel 10-12 mm, adjustable back gauge

Hand lever shears Pagus 1 BR/6 Sheet thickness: 4 mm Knife length: 180 mm Dimensions: 400x100x1500 Year of construction 1995

Cutting clearance: manual Condition of knives: good Minimum cutting angle: 0.5° Maximum cutting angle: 3° Number of hold-downs: 13 Length and number of plate carriers: 8x 500 mm 1x1000mm left stop + ruler Equipped with high-holding device: No Strokes per minute at smallest angle: 10-15 Strokes per minute at widest angle: 6 Working height: 770mm

Metalworker

Profile steel shears, hand lever shears SCHERENBAU NOSSEN ScDH 10 Knife length: 180 mm round: 24 mm square: 22 mm angle: 60 x 7 mm continuous: 10 mm drivable ! used, tested ! Dimensions: 1300 x 700 x 1600 mm

sheet width: 1550 mm plate thickness: 3 mm total power requirement: 3 kW weight of the machine ca.: 1600 kg dimensions of the machine ca.: 2.060 x 1.140 x 1.210 mm Producer: OSTAS Type: RGM 1050 x 3 YOM: new Max. Shearing Length: 1.050 mm Shearing Capacity: 3 mm Shearing Angle: 2°30 Strokes Per Minute: 35 d/d Motor Power: 3 kW Table Width: 510 mm Table Height: 820 mm Rear Gauge Distance: 500 mm Dimensions of the machine (LxWxH): 1.640 x 2.060 x 1.210 mm Weight: ca. 1.100 kg Additional information: • Manual backgauge with 500 mm stroke • Squaring arm with T-slot, stopper and ruler • Foot pedal • Front sheet holding arms • Cutting line lighting • Protection Cages optional: • Cutting unit counter • Motorised backgauge with 500 mm stroke • Backgauge with NC control • Pneumatic Sheet Support System • Optical security bar • 0-180° angle cutting The data for thi ...

1989 Haco SL 3016 Shear Spanning 380 16mmX3050 Find more here - / Contact us at -

Key data: 2040 mm, 3 mm

Max. cutting length: 2040 mm Max. sheet thickness: 3 mm steel Manual backgauge up to 500 mm Side stop and table extensions Knife sharpened 2300 kg

Key data: 1250 mm, 13 mm

1250 x 13mm Hydraulic shear

Hand lever scissors, mounted on concrete base, see pictures Sheet width - max. 200 mm Sheet thickness 6 mm Jxdh33 Flat steel 70 x 7 mm Round steel 13 mm

Mechanical Sheet Metal Shears HSK/W Small mechanical slag shears Capacity 1030×2.5mm With electric rear and forward stop With extra knife Can be viewed under power

The JMC 407 is the top seller among our alligator scissors. It is cost-effective, has a sufficient blade length and enough power for most metal recycling tasks. It is suitable for cutting many materials, such as profiles, pipelines, motors, cables or gearbox housings. The shears are also often used for cleaning scrap metal or cutting vehicle radiators. The machine has a control system without electronics and a manually adjustable hold-down device, which also acts as a protective cover. Using the foot pedal, the scissors can be used in single or continuous operation. The opening width can be adjusted using simple clamping screws. The scissors are from our demonstration pool and can of course be viewed or tested. Further information at BPS Recyclinganlagen GmbH at infoRecyclinganlagen.info

Manufacturer: FASTI Model: 527 - 12 - 4.0 Year of Manufacture: 2002 Maximum Sheet Thickness: 1290 mm x 4.0 mm (at 400 N/mm² tensile strength) Weight: 1900 kg Find more here - / Contact us at -

Max. sheet thickness: 2 mm steel Max. blank diameter: 1000 mm Motorized drive via foot switch

Manufacturer: LVD Model: HST-C 31/6 Year of Manufacture: 2002 Type of Machine: Guillotine shear Maximum Capacity : 164 kN Maximum Weight : 5500 daN Voltage : 400 V Frequency: 50 Hz Power: 19.5 kW Find more here - / Contact us at -

Haco HSL 4100 x 12 mm Cutting length: 4100 mm Max sheet thickness st 45: 12 mm Strokes/min: 7 > 11 str/min Adjustable cuttingedge: 0,5 > 3° Length: 4900 mm Depth: 2180 mm Height: 2250 mm Weight: 11 ton Number of sheet holders: 23x

Hydraulik shear OMAG CE204 - 2050 x 4-5 mm, Information about technical data are not binding., Machine available subject to prior sale., Cutting lenght: 2050 mm, Cutting thick: 4-5 mm, Throath depth: 200 mm, Backgauge travel: 600 mm, Main motor power: 4 Kw, Approx net weight: 3.100 Kg, Accessories: Manual back gauge

Offer 24559 Specifications: - max. working width 1100 mm - max. cutting capacity - at 400 N/m² strength 20 mm - Cutting angle 1°30' - Cutting gap adjustment via hand lever - Number of hydraulic hold-downs 7 pcs - Manual backgauge 10 - 1000 mm - Front angle stop - Front support arms - Stroke rate 13 rpm - Drive 400 V / 45 kW - Table height 700 mm - Space required including back gauge, without front support arm -ca. W 2100 x H 2250 x D 2250 mm - Weight approx. 7500 kg - with: - E-foot switch - Cut line illumination

hydraulic guillotine shear hydraulic CNC guillotine shear with few operating hours and in perfect condition, The Durma VS 4020 is a machine designed for sheet metal processing, specifically a laser cutting machine. Here are some details about the Durma VS 4020 machine: - Laser Cutting Technology: The Durma VS 4020 utilizes laser cutting technology, which is a highly precise method for cutting various types of sheet metal materials. Laser cutting is known for its speed, accuracy, and versatility in creating complex shapes and designs. - Working Area: The "4020" in the model name typically refers to the working area of the machine. In this case, the Durma VS 4020 has a working area of approximately 4000 mm x 2000 mm (or 4 meters x 2 meters). This ample working area allows for the cutting of large sheets of metal. - Laser Source: The machine is equipped with a laser source, which can va ...

Bombled 2100 x 4 mm Max sheetthickness: 4 mm Cuttinglength: 2100 mm Strokes/min: 33 str/min Electric motor (power): 5,5 kW Length : 3500 mm Depth : 1500 mm Height: 1100 mm Weight: 3100 kg

2011 HACO HSLX 6008 Hydraulic Shearing Machine Technical Condition: operational Manual: Attached Specifications: Mild steel capacity: 8 mm Cutting length: 6020 mm Cutting angle adjustment: 105°-3° Number of plate holders: 33 Number of strokes max. min. angle 4-8 Stroke backgauge: MOT(1) version: 1000 mm SAB(2) version: 1000 mm/s Working height 1130 mm Motor power: 15 kW Weight approx.: 26 tonnes Voltage: 3x400V Year of construction: 2011 Find more here - / Contact us at -

Key data: 3000 mm, 6 mm

Max. cutting length: 3,000 mm Max. sheet thickness: 6 mm steel Motorized backgauge with digital display up to 1000 mm Side stop and table extensions Cutting length limitation Cut edge lighting Hydraulic shear angle adjustment Knife sharpened Weight: approx. 6500 kg

LVD MVB 3100 x 6 mm Cutting length: 3100 mm Max sheet thickness st 45: 6 mm Passage between uprights: 3300 mm Strokes/min: 18 > 60 str/min Backgauge: 750 mm Adjustable cuttingedge: 0,5 > 2,0° Electric motor (power): 7,5 kW Weight: 6 ton

Specifications: Maximum cutting width: 3100 mm Maximum cutting capacity for steel St40: 15.0 mm Mot. Adjustable rip fence: 1500 mm Mot. Adjustable cutting gap adjustment Cutting angle adjustment Working height: 860 mm Motor power: 22 kW Side protective grille with light barrier back Dimensions (length x width x height): approx. 4650 x 3600 x 2050 mm Weight: approx. 13,5-ton

Specifications: Maximum cutting width: 2050 mm Maximum cutting capacity steel: 0.5 - 4.0 mm Adjustable rip fence: 1050 mm Retraction function Cutting gap adjustment Working height: 1030 mm Dimensions (length x width x height): approx. 2500 x 1900 x 1750 mm Weight: approx. 3,6 tons

An old GEKA (Georg Eckart) guillotine shear is available. The emergency stop of the machine is defective. On-site inspection is possible.

Specifications: Max. cutting width: 3100 mm Max. cutting capacity for normal steel: 0.4 - 6.0 mm Max. cutting capacity for stainless steel: 4.0 mm Max. cutting capacity for aluminium: 8.0 mm Adjustable rip fence: 1050 mm CNC control Cutting gap adjustment via control Cutting angle adjustment via control: 0.4 – 2.2° Retraction function Sheet metal holding function Stroke rate: 33 cuts Min. Motor power: 5.5 kW Dimensions (length x width x height): approx. 3800 x 2300 x 1950 mm Weight: approx. 6,5 tons

Specifications: Maximum cutting width: 3100 mm Maximum cutting capacity steel St40: 10.0 mm Cutting gap adjustment adjustable rip fence Motor power: 15 kW Dimensions (length x width x height): approx. 3900 x 1950 x 2150 mm Weight: approx. 9,5 tons

sheet width: 2500 mm plate thickness: 12,5 mm distance between columns: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Width of metal, max. 2,500 mm Metal thickness, max. 12.5 mm Weight, approx. 19,000 kg Drive 40 kW Equipment / Special Features: Adjustment of cutting gap. Hydraulic blank holder. Automatic arrester adjustment for cutting blanks. Program input and piece number input. Transportation device for blanks. Stacking device. This is an ideal machine for cutting lots of small blanks out of large pieces of sheet metal. Machine is equipped with a complex stacking device on the back of the machine. This is a heavy and rigid machine. Condition : Good to very good. Machine can soon be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. Thank you for your interest. The data for th ...

Specifications: Maximum cutting width: 3050 mm Maximum cutting capacity steel: 10.0 mm Cutting gap adjustment Cutting angle adjustment adjustable rip fence Dimensions (length x width x height): approx. 3500 x 2500 x 2050 mm Weight: approx. 9,5 tons

sheet width: 5 mm plate thickness: 1000 mm distance between columns: mm total power requirement: 4 kW weight of the machine ca.: 2,8 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Specifications: Maximum cutting width: 4050 mm Maximum cutting capacity steel St40: 13 mm Maximum cutting capacity stainless steel: 8 mm Cutting gap adjustment Cutting angle adjustment adjustable rip fence Dimensions (length x width x height): approx. 4600 x 2400 x 2450 mm Weight: approx. 20 tons

Specifications: Maximum cutting width: 2550 mm Maximum cutting capacity steel: 0.4 - 4.0 mm CNC control: CYBELEC DNC 10 Adjustable rip fence: 100 mm Electronic cutting depth adjustment Recess: 520 mm Working height: 1030 mm Engine power: 9 kW CE mark Dimensions (length x width x height): approx. 2900 x 2300 x 1750 mm Weight: approx. 5 tons

Specifications: Maximum cutting width: 2550 mm Maximum cutting capacity steel 400 N/mm2: 13.0 mm Adjustable rip fence: 1000 mm Adjustable cutting gap adjustment Adjustable cutting angle adjustment Working height: 940 mm Dimensions (length x width x height): approx. 3700 x 2800 x 1950 mm Weight: approx. 9,6 tons

Specifications: Retrofit in 2024 by HACO Maximum cutting width: 3100 mm Maximum cutting capacity steel: 16.0 mm Maximum cutting capacity stainless steel: 12.0 mm CNC control: SP 9 (new) Mot. Adjustable rip fence: 1000 mm Cutting gap adjustment Working height: 1050 mm new knives CE mark Motor power: 30 kW Dimensions (length x width x height): approx. 4800 x 2300 x 2350 mm Weight: approx. 15,5 tons

Specifications: Retrofit in 2024 by HACO Maximum cutting width: 3200 mm Maximum cutting capacity steel St40: 6.0 mm Maximum cutting capacity stainless steel: 3.0 mm Mot. Adjustable rip fence: 650 mm Working height: 800 mm Dimensions (length x width x height): approx. 3850 x 1650 x 1750 mm Weight: approx. 6,3 tons

sheet width: 1550 mm plate thickness: 3 mm distance between columns: 1600 mm back stop - adjustable: 600 mm connected load: 3 kW weight of the machine ca.: 1,1 t dimensions: 2,06 x 2,14 x 1,21 m Demonstration machine with small paint damage. The machine works quietly and is powered by its geared motor Braking system energy-saving. Our machine is welded as a monobloc body from ST42 quality material. The knives of the machine are of 2379 quality and the brand name is BOHLER. These high-quality knives guarantee precise cutting. Emergency stop button, foot switch and finger guard are included standard equipment. (Documentation in English only) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1050 mm plate thickness: 3 mm distance between columns: 1100 mm back stop - adjustable: 600 mm connected load: 3 kW weight of the machine ca.: 1,1 t dimensions: 1,7 x 2,1 x 1,3 m The machine works quietly and it is energy-saving by its gear motor and brake system. Our machine is manufactured as steel construction monoblock body welded from ST42 quality material. The blades on the machine are of 2379 quality and the brand’s name is BOHLER. These high-quality blades ensure quality and precise cutting. Emergency stop button and finger guard grill are standard equipment of foot pedal machine. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2050 mm plate thickness: 3 mm distance between columns: 2100 mm back stop - adjustable: 600 mm connected load: kW weight of the machine ca.: 1,1 t dimensions: 2,7 x 2,1 x 1,4 m The machine works quietly and it is energy-saving by its gear motor and brake system. Our machine is manufactured as steel construction monoblock body welded from ST42 quality material. The blades on the machine are of 2379 quality and the brand’s name is BOHLER. These high-quality blades ensure quality and precise cutting. Emergency stop button and finger guard grill are standard equipment of foot pedal machine. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.