plate shear used for sale

Machine in good technical condition, possibility of testing after agreement. Max. length of cut sheet: 3150mm Max. thickness of cut sheet: 6.3 mm Weight: 8500kg.

Capacity 3100 x 10 mm Delem DAC 350 control good condition inspection possible

Capacity 6070 x 6 mm Electric back gauge Elevated table at the rear

Capacity 3050 x 6 mm Adjustable backgauge

Machine in good technical condition, possibility of testing after agreement. material thickness up to 4mm cutting length 2000mm engine: power 5.5 kW, speed 1500 min-1 Machine weight 3000 kg. Machine dimensions L x W x H approx. 3000mm x 2000mm x 1300mm.

Capacity: 3100 x 8 mm (steel) Cybelec NC backgauge Rear entry protection

The machine is in good technical condition. Max. length of cut sheet: 4000mm Max. thickness of cut sheet: 6mm Controlled rear stop with a range of 1000mm (stroke) Manually adjustable knife spacing Stroke height regulation Weight: 11,000 kg

Capacity 4100 x 6 mm Cybelec DNC 60 CNC control Pneumatic elevation table at the rear Electric cutting gap and angle adjustment

Capacity 3050 x 6mm Touch screen control Electrically adjustable backgauge and cutting gap High support table at the rear with return to sender Small parts are ejected at the front

Capacity: 3100 x 8mm Electric Elgo NC back gauge good condition inspection possible

The machine is in good technical condition. Max. length of cut sheet: 3000mm Max. thickness of cut sheet: 12mm Dimensions LxWxH: 3600 x 1600 x 1900mm Weight: 8300kg By prior arrangement, the possibility of a tour in progress.

Capacity: 3200 x 3mm Renewed control panel from Schroder (original) New encoders and recently spindles High and sharp upper blade Hydraulic automatic top clamping

The machine is in good technical condition. Max. length of cut sheet: 2500 mm Max. tl. cut sheet metal: 12mm Machine dimensions: 3000 x 2200 x 1900mm Machine weight: approx. 10500kg In agreement, the possibility of inspection in progress.

Machine weight: 28800 kg Max. cutting length: 6100 mm Max. metal sheet thickness: 10 mm Unloading in racks: 350 mm Maximum number of strokes per minute: 8-13 min

The machine is in good technical condition, it is possible to test it by agreement. Max. sheet length: 3000 mm Max. sheet thickness: 16 mm Weight approx.: 12000 kg Dimensions: 4200x1700x2300 mm

DURMA MS 2004 guillotine shears were built in 2008 in Turkey. The machine, characterised by the application of many facilities and modern solutions, guarantees precise and efficient machining of, among others, stainless steel, aluminium, copper and plain steel. A sheet metal with a maximum thickness of 4 mm is fed through ball transfers built into the work table, whose design protects the surface of sensitive materials from scratches and nicks. All machining process parameters are programmed on the intuitive DURMA ENC-100M control panel with a clear LCD display and memory for 50 programmes. During the cutting process, the rigid design of the machine ensures that sheet deformations are within tolerance, making both the workpiece and the cut-off ready for further machining. The DURMA MS-2004 mechanical guillotine shears are offered with direct drive, high-quality cutting knives with adj ...

Ermak HGS 3100x6 CNC Guillotine Shear Cybelec Contron Unit Machine is in excellent condition

Ermak HGS 4100X6 CNC Guillotine Shear Machine is in excellent condition Cutting length : 4100 mm

Jusan shear for cutting uncoiled wood. Includes drive belt for the sheet and two 80% blades. It works perfectly and can be viewed at any time.

Durma AHGM 6012 NC Guillotine Shear Cutting length : 6100 mm Machine is in good working condition

Safer 3100 mm x 16 mm NC Guillotine Shear Cutting length : 3100 mm Max. cutting thickness : 16 mm

Ermak CNCHVR 6100 x 16 CNC Guillotine Shear Cutting length : 6100 mm Cutting : 6-10 cut per minute Machine is in good working condition

Electrically adjustable back gauge Manual cutting angle adjustment Light screen protection at the front and rear 1348 power hours

Capacity 2000 x 4 mm Adjustable backgauge Walk-in protection at the rear

Capacity 3100 x 8 mm Equipped with newer touch controls Adjustable backgauge, cutting angle and cutting clearance Elevated table at the rear

Capacity 3100 x 10 mm DT-7 Touch control Adjustable backgauge and cutting clearance Elevated table at the rear Walk-in protection

Capacity: 3100 x 6mm Electric back gauge Walk-in security at the rear

DURMA SB 3020 hydraulic guillotine shears built in 2008 in Turkey are an ideal choice for machining stainless steel, copper, aluminium and plain steel. Workpieces with a maximum thickness of 20 mm are cut using extremely precise, hardened cutting knives with manual adjustment of the gap between the blades. The high-quality monoblock design, combined with the hydraulic system, additionally ensures the highest stability and machining performance, even during the most demanding challenges. To facilitate the operator’s work, special transport rollers have been integrated into the work table, on which the workpiece is fed directly under the cutting line. The machining parameters are programmed in the intuitive DURMA ENC 100M control panel with clear LCD display and memory for 50 programs. The DURMA SB 3020 guillotine shears also features a driven back stop with T-slots and sockets with d ...

This HACO HSL 3013 Shearing machine was manufactured in the year 2007 in Belgium. It is equipped with a HACO SP8 control unit. The machine has a cutting thickness of 13mm

This Haco TS 3012 Shearing machine was manufactured in the year 2004 in Belgium. It is equipped with HACO SP 8 control unit. The machine has a max cutting length of 3000 mm.

This JORDI CH 6100 -10 Shearing machine was manufactured in the year 2001 in Spain. Contact us anytime for further questions.

This Baykal HNC 8116 Shearing machine was manufactured in the year 2014 in Turkiye. It is equipped with a CYBELEC DNC 60 control unit.

round bar steel: 45 mm square edge steel: 42 mm L-beam: 140 x 13 mm flat steel: 350 x 20 mm pressure: 550 kN throat: 305 mm notching: rectangle tool: mm total power requirement: 5,5 kW weight of the machine ca.: 1260 kg dimensions of the machine ca.: 1360 x 750 x 1565 mm 2 working cylinder with 2 separated electric foot switch for 2-people-handling New notching table, new knife for the rectangle notcher and new punching table included For further information please see brochure. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2500 mm plate thickness: 12,5 mm distance between columns: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Width of metal, max. 2,500 mm Metal thickness, max. 12.5 mm Weight, approx. 19,000 kg Drive 40 kW Equipment / Special Features: Adjustment of cutting gap. Hydraulic blank holder. Automatic arrester adjustment for cutting blanks. Program input and piece number input. Transportation device for blanks. Stacking device. This is an ideal machine for cutting lots of small blanks out of large pieces of sheet metal. Machine is equipped with a complex stacking device on the back of the machine. This is a heavy and rigid machine. Condition : Good to very good. Machine can soon be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. Thank you for your interest. The data for th ...

This Durma MS 2504 shearing machine, from 2006, is tailored for efficient shearing with a maximum cutting thickness of 4mm and a cutting length of 2550mm. The machine dimensions stand at 3100 × 1700 × 1350 mm and it weighs 3230 kg, ensuring sturdy operation during extensive usage. Designed primarily for sheet metal applications, it remains operational and under power, ready to handle a diverse range of shearing tasks. For more information about this Durma shearing machine, please reach out to us.

Capacity 3080 x 6mm Delem DAC 350 cnc control Elevated table at the rear

Bombled mechanical shear 2000mm 220V 50Hz model: KF1

plate thickness:4 mm blade length:180 mm weight of the machine ca.:21 kg dimensions of the machine ca.:400 x 100 x 1500 mm

Capacity: 150 x 150 x 1.5mm

Please note: weighs approximately 3500kg, no suitable forklift truck present, buyer must take care of suitable housing himself.

The machine is in good technical condition. Max. length of cut sheet: 2000mm Max. thickness of the cut sheet: 6.3 Weight: 6725 kg Upon prior agreement, the possibility of a tour in progress.

The JMC 150 has a mechanically adjustable hold-down. The scissor head is operated with a foot pedal for individual cuts or continuous cutting. The scissor head is protected with a safety basket. The JMC 150 is a tabletop unit for easy handling. Manufacturer: Mc Intyre Knife length: 150 mm Measuring opening: 105 mm Cutting capacity: 25 tons Round iron ST 37: 25 mm diameter Number of strokes at 1/4 aperture: 20 / min Number of strokes at 1/2 opening: 12 / min Number of strokes at full opening: 9 / min Dimensions ( L x W x H ): 660 x 520 x 620 mm Weight: 150 kg Drive: 1.5 kw / 230 Volt Operation: Foot pedal

Alligator scissors Lindemann Alibo The Lindemann Alibo has a mechanical hold-down. The scissor head is protected with a safety basket. Machine On hand Knife length : 760 mm Weight : 4200 kg Mouth width at the tip : 200 mm Cutting capacity: 0.45 kN/ mm² : Ø 70 mm Number of strokes : 20 – 40 cuts/min Dimensions: 4.20 x 1.50 x 1.80 meters Drive: 15 kw Hold-down: Mechanical

Shaft diameter: 145mm, sheet dimensions: 650x1.5mm, without tools.

Max. sheet thickness: 120mm, length: 2940mm, width: 3660mm, height: 2670mm.

Max. working diameter round/ square/ flat: 30/ 28/ 30mm, length: 550mm, width: 1050mm, height: 1750mm, weight: 700kg.

Stroke speed: 42/min, connected load: 2.5kW.

JMC 900 alligator shears (new machine) The JMC 900 has a hydraulic hold-down. The scissor head is operated with a foot pedal for individual cuts or continuous cutting. The scissor head is protected with a safety basket. Out of stock Delivery time: On request Manufacturer: Mc Intyre Knife length: 920 mm Measuring opening: 473 mm Cutting capacity: 233 tons Round iron ST 37: 88 mm diameter Number of strokes at 1/4 aperture: 26 / min Number of strokes at full opening: 9 / min Dimensions ( L x W x H ): 3200 x 1030 x 1800 mm Weight: 4400 kg Drive: 18.5 kw / 400 V + 1.5 kw electric motor cooler Operation: Foot pedal

Voltage: 220/ 380V, nominal current: 8/ 5A.