plate shear used for sale

Working width: 2040 mm Sheet thickness: approx. 1 mm Back gauge: 600 mm Dimensions: 2400 x 1070 x 1100 mm Weight: approx. 900 kg

Working width: 2040 mm Sheet thickness: approx. 1 mm Back gauge: 600 mm Dimensions: 2400 x 1070 x 1100 mm Weight: approx. 900 kg

This Durma MS 2504 shearing machine, from 2006, is tailored for efficient shearing with a maximum cutting thickness of 4mm and a cutting length of 2550mm. The machine dimensions stand at 3100 × 1700 × 1350 mm and it weighs 3230 kg, ensuring sturdy operation during extensive usage. Designed primarily for sheet metal applications, it remains operational and under power, ready to handle a diverse range of shearing tasks. For more information about this Durma shearing machine, please reach out to us.

LASER PRIMA INDUSTRIE Mod. 2D/3D DOMINO Year 2006 1500x3000 2.5 kw 22,000 working hours Visible in operation No loading and unloading

Max. sheet thickness: 2 mm steel Max. blank diameter: 750 mm Motorized drive via foot switch

hydraulic guillotine shears, manufacturer: EHT, type: TSS 4-60, year of manufacture: 2003, serial no.: 108211, cutting length: 6,075 mm, cutting thickness: 4 mm, various trestles approx. 6 pieces

: neu : 2024 : 9731 : Juni 2024, Zwischenverkau : Türkei : 30100 € : 611.03 € : 1 : 3100 mm : 4 mm : 42 1/min : 750 mm : 7.5 kW : 2 Stk. : 800 mm : 450 mm : 3700 mm : 2300 mm : 1350 mm : 3730 kg mot. back gauge with digitalreadout DT 5 hold down with rubber pads side lay with T-sluts 2 supporting arms ball in the table tape measure tilt stop light barriers on the back of the machine cutting line illumination user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sheet thickness: 6,00 mm Sheet width: 2050 mm Depth rear gauge: 2050 mm GuillotineHACO - TSX 2006 MACH-ID 8599 Robosoift SC5 Backgauge Sheet arms front side Straight infeed arm front side ( left)  Fully hydraulic opperated Maximum sheet thickness:        6mm Max. cutting length:            2050mm Strokes on full length:         10mm Strokes in short 1000 length:   15 Cutting angle:                  0,5 - 3° Length backgauge:               2050mm Number of down holders:         13 Operated mechanical or hydraulic:Hydraulic Power:                          7,5kW Length:           ...

Sheet thickness: 4,00 mm Sheet width: 1100 mm Depth rear gauge: 550 mm GuillotineIndumasch - 410 MACH-ID 7773 Make: Indumasch Type: 410 Year: 1988 Arc depth 550 mm Capacity steel 5 mm Capacity stainless 3 mm Minimum circel diameter 170 mm Maximum sheet thickness:        4mm Working speed:                  35000mm/min. Operated mechanical or hydraulic:Hydraulic Power:                          4kW Length:                         2850mm Width:                          1200mm Height:                         1600mm Weight:          ...

General SKU200W001 LocationBarneveld MakeHPV TypeDish LPD liquid processing unit No.1200-0708/2008 Year of construction2008 Main Features MaterialStainless steel Motor5.5 KW Specified Features - Inline mixer Capacity18,0 t/h of final product MaterialStainless steel 1.4435 (316L) Information Total height2,6 m Weight3500 kg CEcheck Floorspace6,4x2,35 m Extra Specificationsperfume, aroma, mixing skid The LLPD mixing machine is designed for continuous mixing of the final product and its accumulation for subsequent pumping into final packaging. The machine is capable of producing various modifications of the final product (FP) in 10 perfume variants and different color spectra available within the capacity ranges of dye dosing systems. Qualified reblend (RB) can be added to FP during normal production within the dosing capacity range. The LLPD mixing machine consists of: � ...

Hydraulic guillotine for cutting sheet metal by Safan the Netherlands, type VS 255-10, 310 mm x 10 mm (ST40). The machine has a quickly changing knife gap with thickness reading, and a hydraulically variable knife angle of 0.5 -3 degrees. 15 kW motor. Machine weight 10 tons. NC electric bumper with position transmitter with readout, bumper travel 1250 mm. Electrically adjustable cutting length in the range of 30-3100 mm. 2 x supports for holding sheets of metal at the front of the machine, plus a 1500 mm ruler for cutting at an angle of 90 degrees. Light line enabling line cutting. The knives are sharp, the machine cuts copier paper. Original DTR documentation.

Key data: 2500 mm, 6 mm, 1000 mm

Type 509, with pneumatic sheet metal holding Adjustable cutting length, cutting angle and cutting gap 5 table extensions / angle stops approx. 6000 kg

Shear Amada GS 840 4100x8mm with thin sheet metal stand Brand: AMADA Model: GS-840 S/N: C 99 07 16 Year: 1999 Power: 15KW Weight: 11650kg Hydraulic vertical shear with variable angle. Control: AMADA PROMECAM Cutting capacity: 8mm carbon steel / 6mm inox Cutting length: 4050mm Degrees adjustment: 0,4º - 2,1º Cursa: 190mm Treaders: 21 Back stop: 1000mm Front table base: 700m Dimensions: 2040x4810x2210(h)mm Optional included: - Pneumatic support for thin sheet metal.

Guillotine shears, manufacturer: HESSE, type: MS 3004, year of manufacture: 2010, serial no.: 313510563, max. machining capacity: 3,100x4 mm

: gebraucht : 2004 : 9726 : ca. 2 Wochen ab Auftragse : Türkei : 6750 € : 1350 mm : 3 mm : 35 1/min : 1,5 ° : 550 mm : 3 kW : 2 Stk. : 850 mm : 400 mm : 1700 mm : 1350 mm : 1200 mm : 950 kg manualback gauge automatic sheet hold down hold down with rubber pads moveable foot switch side support arm 2 supporting arms user manual in GERMAN does not complie with the German UVV and Austrian AMVO The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Specifications: - Max. working width 3040 mm - max. material thickness 4 mm - Manual cutting angle adjustment - Stroke rate up to 34 1/min - Backgauge with positioning control Pos100 - Table height approx. 850 mm - Front angle stop - 2 front support arms - Rear space protection with light barrier - E-foot switch - Pneumatic connection 6 bar - Drive 400 V - Space requirement without support arms approx. W 4000 x H 1400 x D 2100 mm - Weight approx. 4700 kg

Machine parameters: Max. cutting length: 3150 mm Max. sheet thickness: 6 mm Machine weight: 6800 kg The machine is in perfect condition after GO, the following was done: grinding of blunt knives, resealing of working cylinders and their flanges, resealing of holders and sections, replacement of polyurethanes, replenishment of nitrogen, electrical repair. (Current invoice proving the scope of work of course)

Description: Sheet width 4100 mm Sheet thickness 6 mm Stand width mm DARLEY control Cutting angle 1°20' ° Oil volume 150 litres Description: Cutting length adjustment, foot switch, 3 support arms (left one with scale), motorised backgauge, finger guard, 21 hold-down devices, sheet chute, manual cutting gap adjustment, sheet holding device plate thickness: 6 mm, cutting angle adjustment: 1 °, total power requirement: 18,5 kW, weight approx.: 11,000 kg, Approx. Onsite Dimension. (l x w x h): 4,600 x 2,300 x 2,000 mm

CAPASITY 60 T

Key data: 4050 mm, 6 mm, 1000 mm

Min./Max. Cutting Angle = 0.5 - 2° Cutting gap control = 0.05 - 0.8 mm Stroke rate = 10 - 45 Adjustable back gauge = 750 - 1000 mm Sheet metal high bracket Oil tank = 150 L Motor power = 7.5 kW, 400 V Machine weight = approx. 10,000 kg

Specifications: - Max. cutting width 3050 mm - Max. cutting capacity at 45 Kp/mm² 6 mm - Cutting angle adjustment 1 - 2.20 ° - Cutting gap - adjustment via lateral adjustment lever - Number of hold-downs 16 pcs - Stroke rate up to 22 /min - Front angle stop 1100 mm - 2 front support arms 600 mm -Mot. Backgauge with ELGO positioning control - 5 - 1000 mm - Cut line illumination - E – Footswitch - Drive 400 V / 12 kW - Space requirement approx. W 4100 x H 1500 x D 2200 mm - Weight approx. 5.0 t

Working length: 3040 mm Max. thickness of sheet metal to be cut: - 400 MPa steel: 1,0 mm - Al 250 MPa: 1,5 mm The shears are characterized by a solid, rigid construction and high reliability. The cutting edges of the shears are made of high quality tool steel and are hardened. The main part of the shears is the welded stand, in which the guide surface for the ram is machined. The vertical movement of the ram is derived from the eccentric shaft by means of a connecting rod and pin. The shearing force is exerted by a hand lever pressed onto the end of the eccentric shaft. The shears require almost no maintenance, only occasional lubrication of the sliding points with a lubricating press and sharpening of the blades after they have become dull. The knives on the shears can be sharpened repeatedly. L x W x H: 3465 x 770 x 1160 mm Weight: 830 kg By prior arrangement, possibility of in ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 27200 € : 552.16 € : 2050 mm : 4 mm : 42 1/min : 750 mm : 7.5 kW : 800 mm : 450 mm : 2700 mm : 2300 mm : 1350 mm : 2800 kg motorizedback gauge atrecirculating ballscrew with Control DT5 hold down with rubber pads Side Lay with T-Slot 2 Sheet support arms ball in the table tape measure tilting stop light barriers on the back of the machine cutting line illumination user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Shear Serial number 131 Cutting capacity: 2000 mm Maximum cutting thickness: 10 mm weight approx.: 8,000 kg, Approx. Onsite Dimension. (l x w x h): 2,400 x 2,200 x 1,700 mm

Description: Shear with feeder Shear: - Serial number 1644 - Maximum cutting length 1090 mm - Maximum cutting thickness of sheet metal 3.5 mm / sheet metal 40/45 kg/mm2 LASA feeder: - Model RDC 18F-1500 CM - Serial number 28-1179-A - Maximum coil width 450 mm - Maximum thickness 3 mm - Feeding speed 0-30 m/min weight approx.: 3,500 kg, Approx. Onsite Dimension. (l x w x h): 2,200 x 3,400 x 1,500 mm

plate width: 2,050 mm, weight approx.: 1,000 kg, Approx. Onsite Dimension. (l x w x h): 2,300 x 750 x 1,600 mm

Eccentric guillotine shears SCHRÖDER HS 3000/1.0, built in 2018, max. sheet thickness 1 mm, dead weight 1,055 kg, machine no. 11200311, working width 300 cm, digital display ELGO Z 16

Description: PUNCHING Punching force: 60 ton Punching capacity: Ø22 x 20 mm (Diameter x Thickness): Ø40 x 11 mm Throat depth: 200 mm Maximum stroke length: 40 mm Cycles / Min. (15 mm stroke): 34 mm Working height up to mould: 1050 mm  , ANGULAR CUTTING Cutting force: 60 ton With 90° cut: 100 x 100 x 8 mm Working height: 1070 mm  , FLAT SHEAR Flat bar shear: 350 x 15 mm Blade length: 360 mm Working height: 805 mm  , BAR SHEAR Shear for round bars: ø40 mm Shear for square bars: 38 x 38 mm Cutting channels: 102 mm optional tool I-beam cutting: 102 mm optional tool NOTCHING Rectangular notching (W x D x T): 50.8 x 90 x 8 mm V-cut (L x W x T): 90 x 90 x 8 mm optional tool Working height: 1050 mm  , SPECIAL TOOLS optional  , Single Vee press brake (W x T): 160 x 8 mm tool optional Multi Vee press brake (W x T): 250 x 6 mm tool optional ...

Guillotine shears - hydraulic Make Atlantic Type ATS 3012 Year of construction 1990 Sheet width 3050 mm Sheet thickness 12 mm Distance between columns 3100 mm Table height above floor 900 mm Cutting angle adjustment 0.5 - 3 ° Number of strokes 6 - 13 strokes/min Back gauge - adjustable 1000 mm Hold-down device 18 pcs Oil capacity 350 l Total power requirement 22.5 kW Machine weight approx. 8 t Machine dimensions L x W x H 3.96 x 2.10 x 2.22 m accessories electr. backgauge, spare blade

Offer 24176 Specifications: - max. working width 3050 mm - max. cutting capacity St 40 6.5 mm - Cutting angle hydr. adjustable 0.3 - 3 ° - Cutting gap adjustment by hand - Number of hydraulic hold-downs 18 pcs - Motor - Back gauge 20 - 1000 mm - Front angle stop + support arms - Stroke rate depending on cutting angle and cutting length 7 - 17 rpm - Hydraulic drive 400 V / 11 kW - Table height approx. 800 mm - Space required including back gauge, without front support arms ca. W 4000 x H 1700 x D 2250 mm - Weight approx. 4800 kg - with: - E-foot switch - Cutting line illumination - - Cutting length preselection via potentiometer

Key data: 2040 mm, 3 mm

Max. cutting length: 2040 mm Max. sheet thickness: 3 mm steel Manual backgauge can be operated from the front up to 500 mm Side stop and table extensions Pneumatic sheet hold-up Knife sharpened

Guillotine shears GEKA, without nameplate, working width approx. 200 cm, with support tables steel

Offer 24246 Specifications: - Max. working width 2550 mm - Max. material thickness steel 400 N/mm² 4.0 mm - Max. material thickness stainless steel 700 N/mm² 2.5 mm - Cutting angle 1.8 ° -Mot. Controlled positioning of the back gauge up to 750 mm - Front angle stop - 2 pieces support arms - electr. Footswitch - Rear space protection with light barrier - Drive 400 V / 7.5 kW - Space requirement approx. W 3300 x H 1300 x D 2300 mm - Weight approx. 3500 kg

Description: 16 mm cutting capacity Cutting length 3050 mm Stopping capacity 1000 mm Main motor power kW 30 Work rate strokes/min. 5 to 10 Power supply 380 Volts 3 Ph + T + N Square stop length 1000 mm weight approx.: 14,000 kg, Approx. Onsite Dimension. (l x w x h): 3,880 x 2,220 x 2,550 mm

Description: serial number: 275  , workpiece thickness: 3 mm workpiece length: 2060 mm plate thickness: 3 mm, weight approx.: 4,500 kg, Approx. Onsite Dimension. (l x w x h): 3,600 x 2,300 x 2,100 mm

Description: Capacity 4000x10 mm Backstop travel 1000 mm weight approx.: 13,000 kg, Approx. Onsite Dimension. (l x w x h): 4,300 x 2,500 x 1,800 mm

Description: 6 mm cutting capacity Cutting length 3050 mm Backgauge capacity 1000 mm Speed strokes/min 6 - 10 Motor power kW 7.5 Square fence length 1500 mm. Numerical control. Adjustment of clearance between blade and cutting angle by numerical control. Serial number: 13541995 weight approx.: 6,000 kg, Approx. Onsite Dimension. (l x w x h): 3,740 x 1,960 x 2,000 mm

Description: sheet width: 2550mm Sheet thickness: 2.50mm Sheet thickness for stainless steel: ,1.25mm cutting angle: ,1°30 Hold-down device: ,12 pieces number of strokes: ,30 - 40 strokes/min Backgauge - adjustable: ,approx. 950 mm control DAC 150 Engine performance ,7.5kW With DELEM DAC 150 NC control NC electro-motorized backgauge plate thickness: 2,5 mm, total power requirement: 7,5 kW, weight approx.: 2,800 kg, Approx. Onsite Dimension. (l x w x h): 3,100 x 1,900 x 1,700 mm

Description: serial number 163519  , few hours of operation working length 1350 mm cutting angle 2,32 deg work table height 840 mm , work table depth 390 mm number of support arms 2 positions , support arms 940 mm , strokes per minute 34 h/min , plate thickness (max.) - 450 N/mm² 0,1 mm - 3 mm plate thickness(max.) - 700 N/mm² 1,5 mm motor rating main drive total power 3 kW voltage 400 V, 50/60 Hz , plate thickness: 0,1-3 mm, cutting angle adjustment: 2,32 °, column arm: 940 mm, total power requirement: 3 kW, weight approx.: 1,250 kg, Approx. Onsite Dimension. (l x w x h): 1,930 x 2,150 x 1,310 mm

Description: - Cutting length : 3000 mm - Cutting thickness : 6 mm - Electric rear gauge : 1000 mm Equipped with: - 1 Sheet metal support - 1 Electric stop Stock N° : EX773 weight approx.: 3,000 kg, Approx. Onsite Dimension. (l x w x h): 2,600 x 1,750 x 2,200 mm

Description: Mobile creel + shearing frame and yarn drum pick-up device Approx. Onsite Dimension. (l x w x h): 2,100 x 1,500 x 2,700 mm, weight approx.: 250 kg

Offer 24169 Specifications: - Max. working width 4050 mm - Max. cutting capacity St 40 13 mm - Cutting gap adjustment by hand - Number of hydraulic hold-downs 18 pcs - Motor - Back gauge positioning control 20 - 1000 mm - Front angle stop + support arms - Stroke rate depending on cutting angle and cutting length 7 15 rpm - Hydraulic drive 400 V / 30 kW - Space required including back gauge, without front support arms -ca. W 5400 x H 2250 x D 2250 mm - Weight approx. 16000 kg - with: - E-foot switch - Cutting Line Illumination - - Cutting Length Selection - Rear of the machine with light barrier safety

Working width: 3000 mm Sheet thickness: 7 mm

LVD MV 2550 x 4 mm Cutting length: 2550 mm Max sheet thickness st 45: 4 mm Depth of throat: 70 mm Strokes/min: 26 > 75 str/min Backgauge: 800 mm Adjustable cuttingedge: 0.5° > 1.5° Electric motor (power): 10 HP Length: 3380 mm Depth: 1290 mm Height: 1320 mm Weight: 3,7 ton

Description: SPECIFICATIONS Character: Lefort Gosselies Measuring length: 600 mm Hydraulic drive: Yes Scrap shears: Yes Approx. Onsite Dimension. (l x w x h): 2,700 x 1,000 x 1,200 mm, weight approx.: 1,550 kg

Description: SPECIFICATIONS Character: NN Type: 750 Machine dimensions (L×W×H): 4,850 x 1,250 x 2,000 mm Measuring length: 750 mm Power main drive: 22 kW Electric drive: Yes Hydraulic drive: Yes Machine weight: 7,500 kg Scrap shear: Hydraulic lower holder weight approx.: 7,500 kg, Approx. Onsite Dimension. (l x w x h): 5,200 x 1,500 x 2,000 mm

Description: SPECIFICATIONS Brand: Elga Blade length: 2,500 mm Sheet thickness: 3.2 mm Electric back gauge Drive: hydraulic plate width: 2,500 mm, plate thickness: 3.2 mm, weight approx.: 4,800 kg, Approx. Onsite Dimension. (l x w x h): 1,700 x 2,800 x 1,500 mm

Description: SPECIFICATIONS Brand: Peddinghaus Type: 210 Super 13 Machine dimensions: (L×W×H) 1800 x 1000 x 2100 mm Capacity: 65 T incl. various punches weight approx.: 5,000 kg, Approx. Onsite Dimension. (l x w x h): 1,800 x 1,000 x 2,100 mm

Description: SPECIFICATIONS Brand: Safan Type: ES-310-3 Cutting length: 3100 mm Max. sheet thickness 3.0 mm Fitted with bearings Hydraulic drive Note! Electric back stop is defective weight approx.: 4,500 kg, Approx. Onsite Dimension. (l x w x h): 3,700 x 2,200 x 1,900 mm

Description: • Hydraulic guillotine shear • Serial number 0165 • Motor power 18.50 KW • Cutting length approx. 3100 mm • Maximum sheet thickness 10 mm • Maximum sheet thickness 15 mm (for cuts of approx. 1200 mm length) • Cutting depth approx. 1000 mm • Motorized rear stop • Table dimensions 3300 x 550 mm weight approx.: 9,500 kg, Approx. Onsite Dimension. (l x w x h): 3,600 x 2,150 x 1,850 mm