plate shear used for sale

Code: 0193 Brand: CASATI MACCHINE Model: BIG 3200 - CE Standard Hydraulic two knives veneer pack guillotine shear - CE Standard Description: Sturdy steel made structure, cast iron knife beam. Self-lubrificating prismatic slide-ways The machine allows, with a single operation, to cut the veneer pack on both sides to be trimmed - The simultaneous trimming on two sides of the veneer pack is carried out thanks to the movement at the same time, of two knives, one fitted on a fixed structure and the other one on a moving part - The machine is equipped with an adjustable rear shoulder, as well as with a pressor to clamp the veneer pack during cutting operations. Possibility of working as a single guillotine shear Useful cutting length (as double guillotine shear) mm 3200 Useful cutting length (as single guillotine shear) mm 3550 Pressore stroke mm 100 Pressor width mm 550 Min  ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 19800 € : 380.16 € : 1550 mm : 6 mm : 30 1/min : 2.3 ° : 750 mm : 7,5 kW : 800 mm : 530 mm : 1855 mm : 2220 mm : 1630 mm : 1230 mm : 2900 kg The machines feature a robust, welded steel frame for maximum cutting precision Motorized back gauge 750 mm, ball screw spindles, NC control 2 cutting edges on the upper blade and 4 cutting edges on the lower blade 1000 mm squaring arm with scale, T-slot, and flip stop 2 support arms Mechanical downholder Manual cutting gap adjustment on the front Balls in the table Cutting line illumination Foot pedal Emergency stop button Operating manual with EC declaration of conformity. INCLUDES THE FOLLOWING OPTIONAL EQUIPMENT: Blades suitable for cutting stainless steel Rear light barrier protection The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Production number: 111240 Unit capacity: up to max. 2 mm Sheet thickness Cutting length: approx. 1000 mm Auction-ID: A7-49089-476

Offer 26209 Technical data: - Max. working width 1020 mm - Max. material thickness 2.5 mm - Cutting angle 2.4 ° - Stroke rate up to 34 1/min - Manual backgauge with digital position indicator 500 mm - Table height 850 mm - Front angle stop - Front pull-out material support - Pneumatically supported sheet metal hold-up with sheet metal removal to the front - E-footswitch - Typing - Single stroke pre-selectable - Rear protection grille - Mounted on steel plate - Pneumatic connection 6 bar - Drive 400 V / 3 kW - Space requirement approx. W 2100 x H 1150 x D 2200 mm - Weight approx. 1400 kg

: ca. 12 - 14 Wochen ab Auf : Türkei : 21400 € : 5 mm : 1200 mm : 4,1 m/min : 3000 mm : 750 mm : 1400 mm : 1350 kg : 250 / 2000 mm : 300 mm Mobile control panel Hydraulic clamp on center Gearbox motor with brake Motorized sheet centering system Inside cutting system According to EC safety regulations Operating manual Optional equipment (prices on request): 1 spare blade set Flanging attachment with 1 set rolls The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 94900 € : 1793.61 € : 4100 mm : 13 mm : 8 mm : 350 mm : 8 1/min : 1.75 ° : 18 : 62 to : 1000 mm : 200 mm/s : 30 kW : 330 l : 3 Stk. : 818 mm : 550 mm : 4520 mm : 5350 mm : 2250 mm : 3650 mm : 2250 mm : 16300 kg Swing cut construction NC-preselection system D-touch 7 with touch screen for back gauge, cutting length, quantity, USB port Motorized back gauge 1000 mm on ball screws, folding upwards Clear control panel mounted on moveablearm Hydraulic hold down pistons are arrangedclose to the cutting edge Foot switch Central, manual blade gap adjustment Cutting line illumination Broad table with balls Piece counter Single and continous stoke Fold up finger guard 1.000 mm 1 squaring arm 1. 500 mm with scale,T-slot and tilting cam 2 supporting arms 1.000 mm with T-slot Simple replacement and grinding of theblades Variable adjustable cuttingleng ...

sheet width: 3050 mm plate thickness: 12.0 mm ST plate thickness: 8.0 mm VA no. of strokes: 7 - 14 Hub/min down holder: 18 Stück cutting angle: 0.5 - 3.0 ° work height max.: 930 mm back stop - adjustable: 1000 mm Control: SP 8 total power requirement: 22.5 kW weight: 8500 kg range L-W-H: 4180 x 2030 x 2210 mm from a maintenance workshop good / well-maintained condition () Equipment: - electro-hydraulic guillotine shear with guided blade beam - includes HACO NC control system SP 9 in like-new condition backgauge pre-selection positioning digital display of actual value electro-hydraulic cutting angle adjustment with digital display emergency stop switch - NC motorized backgauge on recirculating ball screws - manual blade gap adjustment, adjustable from the rear - front finger guard - 1x side gauge ... 1,000 mm - rear sheet metal chute - 1x movable foot pedal - operating manual  ...

Cidan CNC guillotine shears in top condition (please note, the matching shears are also available) with rotatable upper beam 3m x2.5mm – with CNC control and depth stop, The scissors are in very good technical and optical condition, all bearings are perfect. The machine comes from a small business/first owner and is accordingly well maintained and maintained. Ideal for tinsmiths, roofers, carpenters, metalworkers or workshops looking for a precise and reliable bending machine.

Offer 26181 Technical data: - max. working width 2540 mm - max. cutting capacity St 40 10 mm - Cutting angle adjustable mot. 0,5 - 3 ° - Cutting gap adjustment by hand - Number of hydraulic hold-downs 15 pcs - Mot. – Back gauge with positioning control 10 - 1000 mm - Front angle stop - Stroke rate depending on cutting angle and cutting length 7 - 17 rpm - Hydraulic drive 400 V / 15 kW - Table height 770 mm - Space requirement approx. W 4100 x H 2030 x D 2030 mm - Weight approx. 7500 kg - with: - E-foot switch - Cut line illumination

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 92100 € : 1740.69 € : 3100 mm : 16 mm : 10 mm : 350 mm : 10 1/min : 2 ° : 14 : 61 to : 1000 mm : 200 mm/s : 37 kW : 410 l : 2 Stk. : 818 mm : 550 mm : 3580 mm : 4550 mm : 2250 mm : 3825 mm : 2250 mm : 15000 kg Swing cut construction NC-preselection system D-touch 7 with touch screen for back gauge, cutting length, quantity, USB port Motorized back gauge 1000 mm on ball screws, folding upwards Clear control panel mounted on moveablearm Hydraulic hold down pistons are arrangedclose to the cutting edge Foot switch Central, manual blade gap adjustment Cutting line illumination Broad table with balls Piece counter Single and continous stoke Fold up finger guard 1.000 mm 1 squaring arm 1. 500 mm with scale,T-slot and tilting cam 2 supporting arms 1.000 mm with T-slot Simple replacement and grinding of theblades Variable adjustable cuttinglengt ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 16600 € : 318.72 € : 1050 mm : 6 mm : 30 1/min : 2.3 ° : 750 mm : 7,5 kW : 800 mm : 530 mm : 1355 mm : 1720 mm : 1630 mm : 1230 mm : 2000 kg The machines feature a robust, welded steel frame for maximum cutting precision Motorized back gauge 750 mm, ball screw spindles, NC control 2 cutting edges on the upper blade and 4 cutting edges on the lower blade 1000 mm squaring arm with scale, T-slot, and flip stop 2 support arms Mechanical downholder Manual cutting gap adjustment on the front Balls in the table Cutting line illumination Foot pedal Emergency stop button Operating manual with EC declaration of conformity. INCLUDES THE FOLLOWING OPTIONAL EQUIPMENT: Blades suitable for cutting stainless steel Rear light barrier protection The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

material width: 100 mm material thickness: 1 mm cross cut: ? total power requirement: 0,75 kW weight of the machine ca.: ? t dimensions of the machine ca.: ? m Sheet Cutting Machine Workspace: 100 x 1 Drive: 0,75 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3060 mm plate thickness: 8.0 mm thickness at Niro-steel: 6.0 mm distance between columns: 3100 mm down holder: 16 Stück no. of strokes: max. 10 - 15 Hub/min oil volume: 160 ltr. cutting angle: 1.6 ° back stop - adjustable: 6.0 - 750 mm Control: ELGO P9521 total power requirement: 18.5 kW weight: 6300 kg range L-W-H: 3900 x 2300 x 1630 mm Features: - Robust electro-hydraulic swing beam shear - ELGO digital display model P9521, for electric backgauge Backgauge travel X = 750 mm Backgauge-free ball screw drive Travel speed 100 mm/s - 1x stable side stop With T-slot, flip-stop, and millimeter scale - 2x stable front support arms - Electric cutting length limiter Cutting length limiter to increase the stroke rate/min. - Manual cutting gap adjustment Centrally operated on the right side stand - Front support plates - Front finger/interference guard - Inching operation with ...

Offer 26186 Technical data: - Max. working width 1275 mm - Max. material thickness (with 40 kg strength) 3 mm - Front angle stop - Front material supports approx. 300 mm - Back gauge adjustable by hand 5 - 650 mm - Stroke rate approx. 32 /min - Cutting angle 1.9 ° - Preselection single stroke / continuous stroke - Drive 400 V / 3.0 kW - E – footswitch - Protective grille at the rear of the machine - Space required including back gauge, without front support arms - approx. W 1500 x H 1150 x D 1450 mm - Weight approx. 1200 kg

sheet width: 3100 mm plate thickness: 4.0 mm thickness at Niro-steel: 2.5 mm cutting angle adjustment: 1.0 ° back stop - adjustable: 10 - 1000 mm adjustment speed: 180 mm/s down holder: 21 Stück strokes per minute: 18 - 31 oil volume: 160 L Control: ELGO P8511 column arm: 200 mm distance between columns: 3050 mm 0: max. 300 bar voltage: 400 V main drive: 9.0 kW weight of the machine ca.: 4800 kg. dimensions of the machine ca.: 3660 x 2070 x 2140 mm from a maintenance workshop Equipment: - electro-hydraulic sheet metal shear swing cut - machine frame = all-steel welded construction - ELGO NC control model P8511, control panel at the front left for positioning the electro-motoric rear stop target/actual position value input possible adjustment by three-phase motor via toothed belt - support table with ball rollers there are recessed grips between the table plates - front finger guar ...

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 62400 € : 1179.36 € : 4100 mm : 6 mm : 4 mm : 50 mm : 12 1/min : 1.5 ° : 20 : 17 to : 1000 mm : 200 mm/s : 15 kW : 200 l : 3 Stk. : 865 mm : 580 mm : 4510 mm : 5230 mm : 2300 mm : 3600 mm : 2150 mm : 11460 kg Swing cut construction NC-preselection system D-touch 7 with touch screen for back gauge, cutting length, quantity, USB port Motorized back gauge 1000 mm on ball screws, folding upwards Clear control panel mounted on moveablearm Hydraulic hold down pistons are arrangedclose to the cutting edge Foot switch Central, manual blade gap adjustment Cutting line illumination Broad table with balls Piece counter Single and continous stoke Fold up finger guard 1.000 mm 1 squaring arm 1. 500 mm with scale,T-slot and tilting cam 2 supporting arms 1.000 mm with T-slot Simple replacement and grinding of theblades Variable adjustable cuttinglength ...

sheet width: 400 mm plate thickness: 4 mm weight of the machine ca.: 0.3 t dimensions of the machine ca.: 0.5x1x2.2 m www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2000 mm plate thickness: 4 mm distance between columns: / mm weight of the machine ca.: 3,4 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

round bar steel: 45 mm square edge steel: 45 mm L-beam: 12 mm : 40 flat steel: 450x15 mm L-beam 90°: 152x152x13 mm : 45 mm square edge steel: 45 mm : 12 mm weight of the machine ca.: 2323 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2540 mm plate thickness: 2 mm thickness at Niro-steel: 1,25 mm no. of strokes: 63 Hub/min cutting angle: 1,13 ° table height: 750 mm table width: 320 mm back stop - adjustable: 5,0-550 mm total power requirement: 3 kW weight of the machine ca.: 1300 kg Equipment: - manual backgauge, with analog display Adjustable from the front stepless adjustment over the entire travel range - 1x long side stop - 3x support arms - Free-moving foot switch - Sheet holding device for thin sheet blanks The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3050 mm plate thickness: 4 mm weight of the machine ca.: 6.500 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 4050 mm plate thickness: 8 mm distance between columns: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2540 mm plate thickness: 2 mm thickness at Niro-steel: 1,25 mm no. of strokes: 63 Hub/min cutting angle: 1,13 ° table height: 750 mm table width: 320 mm back stop - adjustable: 5,0-550 mm total power requirement: 3 kW weight of the machine ca.: 1600 kg Equipment: - manual backgauge, with analog display Adjustable from the front stepless adjustment over the entire travel range - 1x long side stop - 3x support arms - Free-moving foot switch - Sheet holding device for thin sheet blanks The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3060 mm plate thickness: 6 mm no. of strokes: 20 Hub/min stroke: 750 mm Motor Capacity: 11 kW oil volume: 160 l weight of the machine ca.: 5.500 kg dimensions: 3860 x 2560 x 1560 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

hole diameter in sheet thickness: Ø 30 in 12 mm hole diameter in sheet thickness: Ø 19 in 19 mm pressure capacity max.: 45 to weight of the machine ca.: 1.700 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3000 mm plate thickness: 4 mm distance between columns: 3050 mm total power requirement: 8 kW weight of the machine ca.: 4.8 t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2000 mm plate thickness: 2 mm distance between columns: 2050 mm total power requirement: 3 kW weight of the machine ca.: 3 t dimensions of the machine ca.: 2,5 x 2 x 1,5 m guillotine shears adjustable backgauge 600 mm good condition working range: 2050 x 2 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting capacity: - mm throat: - mm round blank diameter max.: 500 mm round blank diameter min.: ? mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3030 mm plate thickness: 3.00 mm thickness at Niro-steel: 1.50 mm no. of strokes: 34 Hub/min cutting angle: 1.6 Grad table height: 820 mm distance between columns: 3120 mm Control: POS 100 engine output: 2x 4.0 kW weight of the machine ca.: 3600 kg range L-W-H: 4329 x 2350 x 1600 mm Current list price, including accessories: approx. 65,000 euros () Special price available upon request The PDC motorized guillotine shear is the reinforced version of the MHSU. It offers greater performance thanks to a more robust design and a DUO-CUT drive on both sides. Features: - Robust, motorized oscillating-cut guillotine shear - NC-controlled electric motor-driven backgauge with SCHRáDER POS 100 NC control system digital position display for the backgauge adjustable from the front right with setpoint/actual value input stepless adjustment over the entire travel range Limit valu ...

sheet width: 2050 mm plate thickness: 6.0 mm thickness at Niro-steel: 4.0 mm distance between columns: 2100 mm down holder: 12 Stück no. of strokes: max. 26 Hub/min cutting angle: 1.6 ° back stop - adjustable: 750 mm Control: ELGO oil volume: 120 ltr. total power requirement: 11.0 kW weight: 3900 kg range L-W-H: 2860 x 2100 x 1560 mm with only approx. 400 operating hours () Original price approx. 30.000 euros Special price upon request Features: - Robust electro-hydraulic oscillating shear - ELGO digital display, Model P9521, for electric backgauge - NC-controlled electric motor-driven material/backgauge Travel range continuously adjustable backgauge X = 750 mm Backgauge with backlash-free ball screw Travel speed: 100 mm/sec - 1x sturdy side stop with T-slot and millimeter scale - 1x sturdy support arm - Electric cut length limiter Cut length limiter to increase the number of ...

sheet width: 3100 mm plate thickness: 6.35 mm thickness at Niro-steel: 4.00 mm cutting angle: 0.5 - 2.5 ° cutting gap adjustment: 0.05 - 0.8 mm no. of strokes: 12 - 50 Hub/min back stop - adjustable: 1000 mm Control: DELEM DAC 360 oil volume: 120 ltr. engine output: 9.5 kW weight: 7000 kg. range L-W-H: 3950 x 1950 x 1680 mm well-maintained condition () equipped with new DELEM control unit Equipment: - electro-hydraulic, guided plate shear - DELEM CNC control unit type DAC 360 front control panel, swiveling front left - Electro-hydraulic cutting angle adjustment - Electro-hydraulic cutting gap adjustment - electro-motorized backgauge, with ball screws - 1x extra-long side fence with T-slot mm scale The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3100 mm plate thickness: 6.0 mm thickness at Niro-steel: 4.0 mm distance between columns: 3120 mm down holder: 14 Stück cutting angle: 1°5 no. of strokes: 14 Hub/min control: ENC 100 table width: 500 mm work height max.: 880 mm oil volume: 170 ltr. total power requirement: 11.0 KW weight: 5550 kg range L-W-H: 3750 x 1950 x 1650 mm Machine was used for ALU processing no heavy sheet metal processing good condition (!) new price ~ 32.000 Euro - in checked conditions - machinevideo - https://www.youtube.com/watch?v=o2LW7L2r7Xs ---------------------------------------------------- Swing cut guillotine shear with fixed cutting angle with DURMA ENC 100 NC control unit manual cutting gap adjustment from the front ---------------------------------------------------- Equipment: - electro-hydraulic guillotine shears swing cut - with DURMA ENC 100 NC control unit Backgauge prese ...

sheet width: 1320 mm plate thickness: 2.5 mm ST thickness at Niro-steel: 1.2 mm blade length: 1350 mm no. of strokes: 34 Hub/min back stop - adjustable: max. 825 mm cutting angle: 1.5 ° work height max.: 810 mm Control: konv. engine output: 3.0 kW weight: 1100 kg range L-W-H: 1950 x 1450 (2000) x 1200 mm Exhibition machine - like new Never been used () Special price upon request Features: - Robust electro-mechanical sheet metal shear - Heavy-duty / robust drive motor - Manual backgauge, including analog position indicator Adjustment range max. 825 mm - Manual cutting gap adjustment - 2x table side stops including mm scale - 1x front stop bar - manually adjustable - 2x front support arms - Grip recess in the front work table - 1x freely movable foot switch, including emergency stop button - Control cabinet/operating panel - front right - Rear safety device - Rear sheet chute - Connec ...

sheet width: 3100 mm plate thickness: 2 mm rear stop: 1000 mm cutting angle: 1°06 ° no. of strokes: 45 Hub/min total power requirement: 3,0 kW dimensions of the machine ca.: 3600 x 2200 x 1600 mm weight: 4500 kg Equipment: - Electric motorized backgauge - With digital ELGO position display - Manual cutting gap adjustment - 1x side stop with mm scale - 2x support arms - 1x freely movable double foot switch - Front finger guard Special accessories included: - Pneumatic sheet metal holding device for thin sheet metal cuts The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width - max.: 200 mm plate thickness: 6 mm flat steel: 70 x 7 mm round bar steel: 13 mm weight of the machine ca.: 50 kg dimensions of the machine ca.: 800 x 500 x 1800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 4100 mm plate thickness: 6.0 mm thickness at Niro-steel: 4.0 mm no. of strokes: 12 - 24 Hub/min cutting angle: 1 ° 30 work height max.: 865 mm back stop - adjustable: 1.0 - 1000 mm down holder: 20 Stück Control: ENC 100 M column arm: 50.0 mm oil volume: 200 ltr total power requirement: 15.0 kW weight: 11460 kg range L-W-H: 5230 x 2250 x 2150 mm New price ~ 50,000 euros () Special price on request ----------------------------------------------------------- NC electro-hydraulic swing cut shears with DURMA ENC 100 M control manual cutting gap adjustment (eccentric) including pneumatic sheet holding device for thin sheet metal cuts ----------------------------------------------------------- Equipment: - robust electro-hydraulic swing cut shears - including DURMA ENC 100M NC control unit Back stop pre-selection - X axis Quantity Cutting length limitation Pivoting opera ...

sheet width: 3050 mm plate thickness: 13.0 mm thickness at Niro-steel: 8.0 mm cutting angle: 0.5 - 2.5 ° no. of strokes: 8 - 25 Hub/min back stop - adjustable: max. 1.000 mm Control: SIEMENS Number of downholders: 13 Stk. oil volume: 300 ltr. engine output: 21.0 kW weight: 8700 kg. range L-W-H: 3950 x 2200 x 1900 mm Features: - Robust electro-hydraulic sheet metal shear Design: Circuit-guided - NC electro-motorized backgauge with SIEMENS NC control unit OP 7 Input of target and actual position values - NC electro-hydraulic cutting angle adjustment - Manual cutting gap adjustment, from the front via handwheel - Recessed grips in the front support table - Front finger guard - 1x long side fence - 1x long support arm - 1x freely movable foot switch - Original operating instructions (NL) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 2004 : 9726 : prompt, Zwischenverkauf v : Türkei : 6750 € : 1 : 1350 mm : 3 mm : 35 1/min : 1.5 ° : 550 mm : 3 kW : 2 Stk. : 850 mm : 400 mm : 1700 mm : 1350 mm : 1200 mm : 950 kg manualback gauge automatic sheet hold down hold down with rubber pads moveable foot switch side support arm 2 supporting arms user manual in GERMAN does not complie with the German UVV and Austrian AMVO BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details:https://www.hesse-maschinen.com/en/lp/used-machines The data for this ad was created with ModulMW ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 25000 € : 480 € : 2050 mm : 6 mm : 30 1/min : 2.3 ° : 750 mm : 7.5 kW : 800 mm : 530 mm : 2355 mm : 2720 mm : 1630 mm : 1230 mm : 3200 kg The machines feature a robust, welded steel frame for maximum cutting precision Motorized back gauge 750 mm, ball screw spindles, NC control 2 cutting edges on the upper blade and 4 cutting edges on the lower blade 1000 mm squaring arm with scale, T-slot, and flip stop 2 support arms Mechanical downholder Manual cutting gap adjustment on the front Balls in the table Cutting line illumination Foot pedal Emergency stop button Operating manual with EC declaration of conformity. INCLUDES THE FOLLOWING OPTIONAL EQUIPMENT: Blades suitable for cutting stainless steel Rear light barrier protection The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2026 : 090187 : prompt, Zwischenverkauf v : Türkei : 14400 € : 276.48 € : 1 : 1350 mm : 3 mm : 35 1/min : 550 mm : 3 kW : 2 Stk. : 850 mm : 400 mm : 1900 mm : 1350 mm : 1260 mm : 1060 kg manualback gauge automatic sheet hold down hold down with rubber pads moveable foot switch side lay 2 supporting arms light barriers on the back of the machine user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2025 : 090132 : prompt, Zwischenverkauf v : Türkei : 47500 € : 798.38 € : 1 : 41800 € : 3100 mm : 6 mm : 4 mm : 50 mm : 15 1/min : 1.5 ° : 16 : 14 to : 1000 mm : 200 mm/s : 15 kW : 200 l : 2 Stk. : 865 mm : 500 mm : 3515 mm : 4110 mm : 2200 mm : 3700 mm : 2100 mm : 7300 kg Swing cut construction NC-preselection system D-touch 7 with touch screen for back gauge, cutting length, quantity, USB port Motorized back gauge 1000 mm on ball screws, folding upwards Clear control panel mounted on moveablearm Hydraulic hold down pistons are arrangedclose to the cutting edge Foot switch Central, manual blade gap adjustment Cutting line illumination Broad table with balls Piece counter Single and continous stoke Fold up finger guard 1.000 mm 1 squaring arm 1. 500 mm with scale,T-slot and tilting cam 2 supporting arms 1.000 mm with T-slot Simple replacement and grinding of theblades Var ...

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 13900 € : 266.88 € : 3.5 mm : 750 mm : 2.2 kW : 6,1 m/min : 2000 mm : 600 mm : 1400 mm : 750 kg : 200/1200 mm Rahmen aus geschweißter Stahlkonstruktion Klingen aus Spezialstahl Lange Lebensdauer der Messer dank der konisch gelagerten Wellen Getriebemotor mit Bremse System zur Einstellung des Schnittdurchmessers mit motorisierter Leistung Mobiles Steuerpult System zum Schneiden des Innendurchmessers Ausrüstung gemäß CE Regulierungen The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 7500 € : 144.75 € : 2 mm : 700 mm : 1.1 kW : 7,5 m/min : 1400 mm : 400 mm : 1150 mm : 360 kg : 120 / 1.000 mm : 280 mm gearbox motor with brake footpedal central lubrication OPTIONAL EQUIPMENT (PRICE ON REQUEST): pneumatic upper roll feed The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 68700 € : 1298.43 € : 3100 mm : 13 mm : 8 mm : 50 mm : 13 1/min : 1.75 ° : 16 : 37 to : 1000 mm : 200 mm/s : 30 kW : 330 l : 2 Stk. : 840 mm : 600 mm : 3550 mm : 4280 mm : 2300 mm : 3600 mm : 2350 mm : 12500 kg Swing cut construction NC-preselection system D-touch 7 with touch screen for back gauge, cutting length, quantity, USB port Motorized back gauge 1000 mm on ball screws, folding upwards Clear control panel mounted on moveablearm Hydraulic hold down pistons are arrangedclose to the cutting edge Foot switch Central, manual blade gap adjustment Cutting line illumination Broad table with balls Piece counter Single and continous stoke Fold up finger guard 1.000 mm 1 squaring arm 1. 500 mm with scale,T-slot and tilting cam 2 supporting arms 1.000 mm with T-slot Simple replacement and grinding of theblades Variable adjustable cuttingleng ...

Guillotine Shears Fasti 506-10-2.5 BJ 1991

HABEGGER Grignoteuse meuleuse ist eine Nage- und Schermaschine (Nibbling und Shearing), ausgelegt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Angaben zu Arbeitskapazitäten sind in den vorliegenden Informationen nicht enthalten. Technische Daten wie Drehzahlen, Verfahrwege, Leistung oder Abmessungen wurden nicht angegeben. Entwickelt, um enge Toleranzen zu erreichen und für Anwendungen, die präzise Bauteilfertigung erfordern Technische Daten ohne Gewähr

: neu : ca. 12 Wochen ab Auftrags : Türkei : 29200 € : 557.72 € : 3200 mm : 2 mm : 1.2 mm : 3650 mm : 1700 mm : 1300 mm : 3100 kg NC-controlled backgauge 750 mm ELGO P40T touchscreen Rear light barrier protection Front finger guard cover Extendable front support bracket Cutting line illumination Equipment compliant with CE directives Operating instructions in German or English OPTIONS: Sheet support, front or rear unloading € 1.900,00 Sheet support, front andrear unloading(NC controlled) € 2.840,00 (gauging length decreases approx. 200 mm) 1000 mm servo-backgauge € 900,00 Side gauge extension to 2 m € 410,00 Sheet metal carriage with rollers (capacity 1,000 kg) € 1.040,00 Angle stop € 460,00 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 16400 € : 314.88 € : 2050 mm : 3 mm : 35 1/min : 1.5 ° : 750 mm : 3 kW : 800 mm : 520 mm : 2720 mm : 1575 mm : 1230 mm : 1900 kg The machines feature a robust, welded steel frame for maximum cutting precision Motorized back gauge 750 mm, ball screw spindles, NC control 2 cutting edges on the upper blade and 2 cutting edges on the lower blade 800 mm squaring arm with scale 2 support arms Mechanical downholder Manual cutting gap adjustment on the front Cutting line illumination Foot pedal Emergency stop button Operating manual with EC declaration of conformity. INCLUDES THE FOLLOWING OPTIONAL EQUIPMENT: Blades suitable for cutting stainless steel Rear light barrier protection The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 59600 € : 1126.44 € : 3100 mm : 10 mm : 6 mm : 50 mm : 13 1/min : 1.5 ° : 16 : 22 to : 1000 mm : 200 mm/s : 22 kW : 200 l : 2 Stk. : 865 mm : 580 mm : 3515 mm : 4200 mm : 2250 mm : 3600 mm : 2100 mm : 9300 kg Swing cut construction NC-preselection system D-touch 7 with touch screen for back gauge, cutting length, quantity, USB port Motorized back gauge 1000 mm on ball screws, folding upwards Clear control panel mounted on moveablearm Hydraulic hold down pistons are arrangedclose to the cutting edge Foot switch Central, manual blade gap adjustment Cutting line illumination Broad table with balls Piece counter Single and continous stoke Fold up finger guard 1.000 mm 1 squaring arm 1. 500 mm with scale,T-slot and tilting cam 2 supporting arms 1.000 mm with T-slot Simple replacement and grinding of theblades Variable adjustable cuttinglength ...

Offer 26220 Technical data: - Cutting length 3050 mm - Cutting thickness at 400 N/mm² strength 16 mm - Cutting thickness at 400 N/mm², strength up to 1000 mm, length 18 mm - Cutting angle 0.5 - 3 ° - Number of sheet hold-downs 18 pcs - Stroke rate 10 - 23 min - Mot. Back gauge up to 1000 mm - Rear area protection with light barrier - Front angle stop 1000 mm - HSLX version: - CNC control HACO SC 5 controller when entering the sheet thickness in mm - Autom. Cutting angle adjustment according to sheet thickness - Cutting length limitation - Autom. Positioning of the backgauge (8 programs – 80 sets) with - Digital display and autom. Backgauge retraction - Drive 400 V / 22 kW - E - Footswitch - Space requirement without support arms approx. W 4500 x H 2250 x D 2200 mm - Weight approx. 14500 kg