plate rolls used for sale

Pressing plate of BRUDERER BSTA 41 type W x D x H = 660 x 550 x 95 mm Hole = 500 x 100 mm

6x NUMMERATORS CROSS PLATE, FORWARD, SMALL No. of the Wheels: 7 Fig.Size: 3/16 Prefix Arm: RA

all stainless steel belt width 640 mm natural gas 16 kW 414 kW heat capacity 3 x 400 V gas pressure 30 mbar

sell used 60 he Pall diatomaceous earth-EK layers filter with 100 EK layers and 21 frames of diatomaceous earth

Qty. 1 Second-hand plate saw Mfc.: Mayer Model: PS3 E Built: 1989 – new electrical panel in 2010 Plate dimensions: Length: 3100 mm Thickness: 70 mm Saw Motor power: 11 kW, 2890 RPM Blade dia.: 350 mm Blade tension: Hydraulic Footprint: 5700 x 7500 mm –W x L Lubrication: Micro-spray ACCU-LUBE

Size: 3,000 mm x 1,200 mm -no attacks -without pressing cylinders

TECHNICAL SPECIFICATIONS Manufacturer: HENKE Designation: Production plant for concrete block slabs Type: UNI 2000 Year of construction: 1995 Operating hours: 11,543 h COMPOSED OF: Item 010) Fully automatic rotary table top pressure press UNI 2000/600/7 Item 020) Attachment distribution device for fine-grained attachments Pos. 030) Fully automatic dividing disc dosing unit with 8-fold ejection Item 040) Fully automatic direct washout system "WESER 100/2" for flat laying (horizontal) Item 050) Moulding frame device 400 x 400 mm, 2-fold Pos. 070) 2 x chain conveyor 1.50 m long Item 080/120) Pallet destacker Item 090) Cleaning brush Item 100) Pallet oil roller Item 110) Intermediate transport Pos. 130) Plate removal device Item 160) Stacking arm with bearing block Item 170) Chain conveyor 5 m long Pos. 180) 2 x Plate Pack - Lifting Item 190) Parcel push-off device  ...

Length: 600 mm Width: 300 mm

2pcs 3250 x 1885 x 400 mm

6 pcs 6400 x 1885 x 400 mm

Plate bend Ingkant SM 52; cleaned and tested; Table equipment; suitable for Heidelberg SM 52 plates. Plate bender SM 52; good condition; cleaned and checked; table top model; used for Heidelberg SM 52 plates.

M. No.: 1166

AGFA Imaging Plate System / CR System CR 30-X (for Veterinarian) Primary processing station 3 CR cassettes • Before taking over, all devices and systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in the "AS" condition from the warehouse Freiberg (EXW), Saxony, Germany, and pay in advance. • Sold as "Used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without warranty. • To restart the device, you will most likely need a license from the device manufacturer. • The installation, commissioning and configuration of the system or system components must be carried out by the manufacturer or by a specialist or technician authorized b ...

Printing plate bending for Heidelberg SM 52 Beil PB-S 52; good condition; cleaned and tested; Stand-up device; suitable for printing plates Heidelberg SM 52. Plate bender for Heidelberg SM 52 Beil PB-S 52; good condition; clened and checked; used for Heidelberg SM 52 plates.

6pcs of Skoda floor plates 6400x1885x400mm pirce 12000eur/pc 4pcs of Skoda floor plates 5600x1885x400mm price 10500eur/pc 2pcs of Skoda floor plates 3200x1885x400mm price 6000eur/pc

- Retaining plate MWM 12300186 - Suitable for several motors - Please note! Price per piece! - 12300186 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integrating ne ...

Printing plate development machine Koenings KTW 653; good condition, cleaned and tested; 3 brushes; inlet width 650mm; suitable for waterless panels. Plate processor Koenings KTW 653; good condition; cleaned and checked; 3 brushes; width 650mm; Used for waterless plates.

2pcs 3500 x 2000 x 350 mm

GEA Plate heat exchanger NT50T CDS-10 with 10 plates in very good condition Material: 1.4405 Min./Max. permissible pressure: 0 bar / 6 bar (both sides) Min./Max. permissible temperature: 0.0 °C / 100 °C Test pressure: 7.8 bar Volume: 0.82 / 1.03 L Kerb weight: 83 kg Width: 320 mm Height: 670 mm Depth: 600 mm Connections: 2x Flange DN50 2x Flange DIN 11851 (milk pipe thread) Number of plates: 10 Last refrigeration/heat medium: water-glycol mixture Seals: EPDM

HENKE UNI 2000-6000 Built in 1995 Format: 400x400 2-speed 400x600 2-speed 1. Distributor for attachment 2. Doser 3. Settling device 4. Chain conveyor 5. Roller conveyor 6. Plate destacker 7. Cleaning device 8. Plate oiler 9. Pawl conveyor 10. Stacking device 11. Plate removal device with rotating device 12. Control for UNI 2000 13. Belt conveyor with lifting 14. Belt conveyor 15. Plate Displays 16. Carrier chain conveyor 17. Push-off device with roller table 18. Autom. Control for packaging 19. Fader Puller HENKE UNI 2000-6000 Year of production: 1995 Sizes: 400x400 2x 400x600 2x 1. First layer distributor 2. Dozer 3. Take-off device 4. Chain conveyer 5. Roll conveyer 6. Destacking device 7. Cleaning device 8. Oiling device 9. Slap converter 10. Stacking device with rotating device 11. Arm with rotating device 12. Control for UNI 2000 1 ...

GEA Plate heat exchanger NT50T CDS-10 with 10 plates in very good condition Material: 1.4405 Built: 2007 Min./Max. permissible pressure: 0 bar / 6 bar (both sides) Min./Max. permissible temperature: 0.0 °C / 150 °C Test pressure: 7.8 bar Volume: 0.82 / 1.03 L Kerb weight: 88 kg Width: 320 mm Height: 670 mm Depth: 600 mm Connections: 2x Flange DN50 2x DIN 11851 (milk pipe thread) Last heat medium: steam Seals: EPDM

GEA plate heat exchanger VT10 CDS-16 with 10 plates in very good condition Built: 03/2006 Min/Max permissible pressure: 0 bar / 10 bar (both sides) Min./Max. permissible temperature: -10 °C / 100 °C Test pressure: 13 bar Volume: 3.0 / 3.3 L Kerb weight: 133 kg Width: 290 mm Height: 920 mm Depth: 570 mm Refrigeration/heat medium: propylene glycol Connections: 4x Pipe nipple DN 50 Device can be inspected at any time in 76694 Forest upon request.

M. No.: 5927/37

M. No.: 6513/19

Plate punch HD/Nela SM 52; good condition; cleaned and tested; Table equipment; Punching 425mm Autoplate. Plate punch HD/Nela SM 52; good condition; cleaned and checked; table top machine; punch size 425mm autoplate.

Plate filters for liquid media

Alu clamping table - clamping block Offer number: 18285 Make: xxxxx Type: xxxx Machine Number: 18285 Built: xxxx Technical data: - Plate surface well preserved - Length approx. 1540 mm - Width approx. 1540 mm - Height approx. 410 mm - Plate thickness 20 mm - 6 pcs screw-on - bars 50 x 20 mm - various holes partly with thread - Intermediate bars between the upper plate and under the support surface - 4 towing eyes - Weight approx. 180 kg

M. No.: 458/08 (C.2.144.1301/02) Max. Format: B1 Voltage : 100-240V // 300-330VA // 50/60Hz

Electrical magnet size 1000 x 300m 110 volt supply IP 66

Used Electromagnetic clamping plate , from ABA grinding machine Technical data: Length: 600 mm Width: 300 mm

Printing plate punch/lacquer plate punch for Heidelberg XL 145/162; good condition; cleaned and tested, perforation 1200mm autoplate. Plate punch/ plate punch for varnish plates for Heidelberg XL145/162; good condition; cleaned and checked; hole size 1200mm autoplate.

Plate plate made of cast iron with longitudinal grooves and mounting holes, manufactured according to DIN876, the T - grooves manufactured according to DIN650 - H12. - 4 plates with dimensions 3,000 mm x 1,200 mm x H 300 mm.

Clamping plate 5,000 mm x 2,000 mm x H 400 mm made of cast iron with 10 pieces T - grooves with 35 mm width, manufactured according to DIN876, the T - grooves manufactured according to DIN650 - H12.

Clamping plate 5,000 mm x 1,980 mm x H 300 mm made of cast iron, with 6 pieces T - grooves with 35 mm width, manufactured according to DIN876, the T - grooves manufactured according to DIN650 - H12.

M. No.: 121

New, reinforced and smooth-running beverage market cart from the manufacturer Katschotec with an additional basket for small parts. The trolley is not only ideal for beverage markets, but is also frequently found in DIY stores and electrical stores. Our B-goods are new goods with small flaws, such as .B small paint defects. Technically/functionally, our record trolleys are absolutely flawless. With us you will receive a product with an excellent price-performance ratio. Technical data: • Manufacturer: Katschotec • Total dimensions (LxWxH): 970 x 525 x 40 mm • Dimensions platform (LxB): 740 x 470 mm • Dimensions basket (HxTxL): 250 x 170 x 485 mm • Stack depth: 230 mm • Stable flat oval tube construction with round tube handle • Ergonomically shaped handle protection caps • 4 steering wheels • Weight: 21 kg These are plate wagons with unbraked rollers.  ...

Pneumatic plate punch INGEKBA Rapida 142; good condition: perforation 780mm autoplate; investment contact; compressed air required. Pneumatic plate punch KBA Rapida 142; good condition; punch size 780mm autoplate; feeder control; Compressed air needed.

Plate Scanner Machine No.: 34373 Size: max. 102cm Plate Scanner/Plate Reader for Heidelberg Speedmaster SM 102/SM 74, SM 52, Plate Image reader, for measuring the printing part of the surface of offset plates and stores the measured values on the job memory card or in the CPC data memory, for on-line transfer of the values to the press's control unit (for calculation of ink fountain zone openings and ink stripe widths in CPC 1 control unit), for all types of printing plates up to SM 102 format plates

PLATE BENDING MACHINE FACCIN - 4 ROLL HYDRAULIC 3000 X 40 MM - MODEL 4HCI3-35/30 YEAR 1990 /2025 PLATE BENDING ROLL LINEAR GUIDEWAYS DOUBLE PINCH PRE-BENDING Machine in good working condition Bending capacity -Plate width : 3000 mm -Rolling plate thickness 40 mm - Prebend thickness 35 mm Rolls dimensions: -Useful length 3050 mm -central rolls upper/lower D 470 mm -side rolls left/right D 420 mm • Hardening of the 4 rolls high strength surface • 3 rolls driven powered with gear unit with hydraulic motor • Conical bending attachment side rolls tiltable to form cones, contrast pad roller type. • Opening front hydraulic drop-end to unload the closed shell. • Variable speed working roll bending rotation hydraulic speed fas ...

Pressure plate intermediate table Grafoteam MDT 260 C; condition overhauled; 2 pieces available; Arm length 780mm; Max. Plate size 780x820mm. Plate conveyor Grafoteam MDT 260 C; condition rebuilt; 2 pic. on stock; arm lenght 780mm; max.plate size 780x820mm.

Large electronic clamping magnet

Aluminium measuring table with 50 mm aluminium plate and drawer cabinet Type: Measuring Table with Aluminum Measuring Plate Dimensions: 80 cm wide, 75 cm deep and 95 cm high (2.26 cm high with construction) Aluminium plate: 5 cm thick, with mounting threads Drawer cabinet manufacturer: Garant (Hoffmann Group) Number of drawers: 2 Material: Aluminum Condition: used Complete plant closure, large selection of mezzanines, pallet racks, shelving racks, paternosters. High Quality Industrial Machinery, Lathes, Grinding Machines, Hand Machinery Suppliers in China More items - new and used - can be found in our shop! International shipping costs on request!

Mechanic plate bending machine Goyar 3C-25/20. Bending lenght: 2000mm. Bending capacity: 25mm. Diameter of upper cylinder: 285mm. Diameter of lower cylinders: 235mm. Main motor power: 20cv. Bending speed: 5 mpm. Weight: 5500Kgs.

Extraordinary precision Milling, engraving or cutting is possible with the highest precision, due to the high-quality inclined toothed racks installed on each axis. Ideal for processing plate material With the large machining area, the T-Rex is the best possible choice for milling plate materials, as well as for text or image engraving on 2D, 2.5D or 3D workpieces. Thanks to a assembly aid on the short side of the CNC milling machine, the work surface can be ideally and comfortably equipped with the plate material. The ball rollers allow an effortless glide of the plates. External dimensions LxWxH: 3780x2850x1950 mm Weight: circa 1950 kg Clamping surface XxY: 3030x2020 mm Travel XxYxZ: 3000x2000x200 mm (optional 300/400 mm in Z-axis) Width linear guides X,Y,Z: 20 mm Repeatability: 0.01 mm Reverse play: approx. 0.015 mm Working speed: 12000 mm per minute  ...

Very high-quality CNC – controlled precision sheet metal bending machine with automatic bending sequence calculation - automatic CNC – controlled double-sided pre-bending - Conical bending device - three hydraulically driven rollers (one hydraulic motor per roller) - hydraulic linear under-roll adjustment - hard chrome-plated piston rods - hardened and ground rollers - PILZ® laser protection - BECKHOFF® CNC control with Ethernet technology and large touch screen - DANFOSS® precision hydraulics - Central lubrication system

Anilox - cylinders and plates washer

Very high-quality CNC – controlled precision sheet metal bending machine with automatic bending sequence calculation – automatic CNC – controlled double-sided pre-bending – conical bending device, three hydraulically driven rollers (one hydraulic motor per roll), hydraulic linear sub-roll adjustment – hard chrome-plated piston rods – hardened and ground rollers - PILZ® laser protection - BECKHOFF® CNC – control with Ethernet technology and large touch screen - DANFOSS® precision hydraulics – central lubrication system Maximum bending length 2,000 mm Roll diameter 170 mm Smallest weft diameter = 1.1 x the roll diameter The rollers run in bronze plain bearings. Nominal pre-bending performance over the entire bending length at 5 x D = 5 mm for sheet steel/ST40 Nominal bending performance over the entire bending length at 5 x D = 7 mm sheet steel/ST40 Drive power  ...