plate rolls used for sale

We sell a WP Rotamat EN . 30 - 70g / 30 pieces Top condition

Used bread counting machine LIPSIA -In bakery condition- - Counting machine - Touch panel (will be renewed) - Programs can be saved - Capacity/capacity: 12,000 pieces/h In addition, the following are sold: - Feed belts - Spiral conveyor belt - Collection table - Crimp barrel catch plate The plant is out of service. Viewing and test run are possible by arrangement.

We sell a Fortuna A3 semi-automatic.

BAQUETTE MACHINE

Dough dividing and warping machine Fortuna Bread roll press TTW Fortuna Automat Gr. 4 E with active cabling circuit Head cleaning with electric motor Partial header newly revised 30-piece with stainless steel knife NEW Dough insert 1200 to 3600 g, Unit weight from 40 to 120 g E-system NEW DGUV V3 tested with return button Connection 400V, 16A-CEE plug Size ca.: 710 x 730 x 1500 mm WxDxH Used machine overhauled with 6 months warranty large selection of Fortuna vending machines

Dough dividing and warping machine Bread roll press Fortuna Automat Gr. 3+ in large selection in stock! with active cabling circuit Head cleaning to the rear electric Partial head with stainless steel measuring device NEW Dough insert up to 2400g depending on TA Dough divider with 3 new knitting plates E-system NEW with return button DGUV V3 tested Protective visor Connection 400V, 1.6 kW, 16A-CEE plug Dimensions: 720 x 800 x 1510 mm Used machine overhauled with 6 months warranty Option: Platform or chassis

Dough divider bread roll press Fortuna Automat Gr. 3+ with active cabling circuit Head cleaning to the rear Partial header newly revised with stainless steel knife NEW Dough insert up to 2400g depending on TA Dough divider with 3 new knitting plates with return button E-system NEW DGUV V3 tested Connection 400V, 1.6 kW, 16A-CEE plug Dimensions: 720 x 800 x 1510 mm Used machine overhauled with 6 months warranty only on spare parts Option: Platform or chassis

Broma Milk Roll Pusher Milchweck / dough piece pusher for manual assignment / one-man operation Pressure setting adjustable long discharge belt Tabletop unit DGUV V3 tested Connection 400V, 16A-CEE plug Used machine overhauled with 6 months warranty

Semi-automatic dough dividing and warping machine Bread roll press Model: 4/30 sophisticated technology ... the original! Knives with easy cleaning position! with 3 active plates replaceable partial disc / part head manual sharing mechanical rounding Dough ring coated with easy klick Subrange 40 to 120 grams/piece Division 30 parts Machine mobile DGUV V3 tested Connection 400V, 0.75 kW, 16A-CEE plug Dimensions: 600 x 700 x 1520/2200 mm, WxDxH NEW Machine with 2 years warranty

Dough dividing and warping machine, Bread roll press Semi-automatic Model: 4-14 NEW sophisticated technology ... the original! Knives with easy cleaning position! with 3 active plates Dough ring coated with easy klick Subrange 130 to 250 grams/piece Division 14 parts Machine mobile DGUV V3 tested Connection 400V, 0.75 kW, 16A-CEE plug Dimensions: 600 x 700 x 1520/2200 mm, WxDxH NEW Machine with 2 years warranty

Bread roll press Semi-automatic Dough dividing and warping machine Model: 3-30 NEW sophisticated technology ... the original! Knives with easy cleaning position! with 3 active plates Dough ring coated with easy klick Subrange 30 to 100 grams/piece Division 30 parts Machine mobile DGUV V3 tested Connection 400V, 0.75 kW, 16A-CEE plug Dimensions: 600 x 700 x 1520/2200 mm, WxDxH NEW Machine with 2 years warranty

Dough dividing and warping machine Bread roll press Fortuna Gr. 3 Semi-automatic 30-piece Part header NEW revised Stainless steel knives NEW Dough insert up to 2550g, depending on TA Piece from 35 to 70g Round/85g Square Capacity max. 7000 pieces/h with 3 new knitting plates E-system new DGUV V3 tested Connection 400V, 1 kW, 16A-CEE plug Dimensions: 580 x 580 x 1350 mm, WxDxH Used machine overhauled with 6 months warranty

Bread roll press Fortuna Gr. 3 Semi-automatic 30-piece Part header NEW revised Stainless steel knives NEW Dough insert up to 2550g, depending on TA Piece from 35 to 70g Round/85g Square Capacity max. 7000 pieces/h with 3 new knitting plates E-system new DGUV V3 tested Connection 400V, 1 kW, 16A-CEE plug Dimensions: 580 x 580 x 1350 mm, WxDxH Used machine overhauled with 6 months warranty

Bread roll press size 3 Fortuna semi-automatic 30-piece Part header NEW revised Stainless steel knives NEW Dough insert up to 2550g, depending on TA Piece from 35 to 70g Round/85g Square Capacity max. 7000 pieces/h with 3 new knitting plates E-system new DGUV V3 tested Connection 400V, 1 kW, 16A-CEE plug Dimensions: 580 x 580 x 1350 mm, WxDxH Used machine overhauled with 6 months warranty

Turntable for seeds Fortuna DT Stainless steel Shelf below for seed plates Wired mobile Connection 400V, 1 kW, 16A-CEE plug Used machine cleaned 6 months warranty Visit our large Bakery Machinery Center!

Used plastic rollers for flow rack - Roller strip - Picking rack - 100 pieces - white Properties: - Rolls compatible with many manufacturers of flow racks - Spare rolls in practical bag - Rollers are mounted in the click system - Manufacturer: SSI Schaefer - Color: white - Used, in very good condition - Rolls made of robust polypropylene (PP) - Rollers with stable plastic axle / partly also steel axles Metrics: - Roller width: 25 mm - Roller diameter: 26 mm - Axle width: 34 mm - Axle diameter: 4 mm Scope of delivery: - 100 pieces of rolls (without mounting profile) All information without guarantee. The shipment takes place within Germany (except islands) free unloading point, without unloading, without contracting, without assembly. Island shipping excluded.

Used plastic rollers for flow rack - Roller strip - Picking rack - 100 pieces - yellow Properties: - Rolls compatible with many manufacturers of flow racks - Spare rolls in practical bag - Rollers are mounted in the click system - Manufacturer: SSI Schaefer - Color: yellow - Used, in very good condition - Rolls made of robust polypropylene (PP) - Rollers with stable plastic axle / partly also steel axles Metrics: - Roller width: 25 mm - Roller diameter: 26 mm - Axle width: 34 mm - Axle diameter: 4 mm Scope of delivery: - 100 pieces of rolls (without mounting profile) All information without guarantee. The shipment takes place within Germany (except islands) free unloading point, without unloading, without contracting, without assembly. Island shipping excluded.

Head machine KÖNIG, type: Mini Rex 3000 - AB/SKG63 - two rows - good technical condition - manual control - Stainless steel frame - mobile, on wheels - technically tested and cleaned Specifications Number of rows: 2 Capacity: 2,000 - 3,000 pcs./h Weight range: 20 - 115 g El. Connection: 1.3 kW, 3x400 V, 3 A, 50 Hz Visits and test runs are possible by arrangement.

Used bread press FORTUNA, automatic size 4 -Refurbished- - Fully automatic bread roll press - 30 troughs per plate - Weight range: 40 - 110g - for 3.300g dough total - incl. new stainless steel knives - automatic head - with effective cut-off (only cutting - no rounding) - Condition: very good, ready for immediate use - 6 months warranty - Video on request The machine has been completely overhauled and is in very good condition. A visit is of course possible by arrangement.

For sale is a bread press with a weight range of 30-100g. Partial and circular moulding agents Electronic control with memory for 10 products Incl. 3 knitting plates

We sell a used and revised TTW with a deposit of 30-100g.

- for the production of sliced rolls, smooth rounds, long rolled rolls and double pieces Year of construction: 2007 Weight range: 30-85 g Hourly output: max. 3,000 pieces 4-row system with 600 mm working width Integrated dough divider and drum transformer, Multimatic Pre-fermentation time 12 min (6 min before long roll station and 6 min between long roller and cutting station)Hanger drying Variable depositing device for digestate carriers of 3 Euro sizes: 400x600 / 580x780 / 580x980 mm UV Disinfection StationSiemens Touch Screen Control External dimensions (LxWxH): 3000x1250x2550 mm

Used head machine KÖNIG, Type: Mini Rex Futura -In bakery condition- Suitable for wheat and rye doughs (up to 40% rye content). - Head machine / dough divider: KÖNIG Mini Rex Futura TR/G-FS - Warp knitting roller: SKG54 and AKG70 (20 - 135g) - Capacity: 1,500 - 4,000 pcs./h - 2 rows - new Teflon - Condition: Good, ready for immediate use Visits and test runs are possible by arrangement.

Used head machine KÖNIG, Type: Mini Rex Futura -Overhauled- - Head machine / dough divider: KÖNIG Mini Rex Futura TR/G-FS - Warp knitting roller: SKG54 and AKG70 (20 - 135g) - 2 rows - new tapes - new Teflon - Wear parts renewed (completion 15 January 2023) - 6 months warranty - Condition: Very good, ready for immediate use Suitable for wheat and rye doughs (up to 40% rye content). Visits and test runs are possible by arrangement.

Stainless steel clad for approx. 6,000 Kaiser rolls per hour composed of: Head machine type K5 Weight range approx. 40 - 100 g 5-row Pre-proofing cabinet type GSTA-UDB Change Stüpfelkopf for Kaiser and Stern Sheet metal setting

Vacuum lifting device for paper rolls NAGRON AEROLIFT Vacuum lifter for the paper industry Woudenberg Holland Type R96-20 Fabr. No. 9745 Year of construction 1999 Payload 2000 kg Centering mandrel 90 mm Suction surface Outer diameter 850 mm (plus seal)Suction surface inner diameter 250 mm (minus seal) Seal width 50 mm Suction surface 0.5 m2 Negative pressure min. -800 mbar Pumping speed approx. 100 m³/h per vacuum pump Motor power 2x 2.2 kW Mains connection 400 Volt, 50 Hz - 2 pieces Rietschle vacuum compressor, type VCE 100 Dimensions x H 1600 x 2250 mm Height with centering mandrel 2500 mm Total height in transport frame 2950 mm Net weight 2,5 ton.; used

Fortuna dough dividing and warp knitting machine Type: A4 Roll Press Division of 30 Weight range dough pieces 32-120 grams Dough insert per ratchet 960-3600 grams Year of construction: 2015 electric head including 3 knitting plates The robust design and duration of the oil cracking of the transmission parts ensures a long service life Easy cleaning even of the cutter head 380V / 50Hz Weight of the machine approx. 540 kg Trade-in and delivery on request Option for a complete overhaul of the machine Dimensions:  Height: 150 cm Width: 70 cm Depth: 70 cm

Thenbsp;Ras ductseamer 22.82 produces longitudinal seams along the edges of square or rectangular cross-section ducts. This duct seaming machine has 15 roller shafts which are equipped with seaming rollers, and nine further intermediate rollers are located in an overhead seaming bar. The RAS 22.82 is a very simple and reliable machine that can be easily operated by one person. max thickness: 1,25 mm

Zum Verkauf bieten wir Ihnen die GULLIVER Brotlinie an. Baujahr 2009. Sprechen Sie uns gerne an.

3 driven rolls conical bending 4 digital readouts Number of rolls: 3100 mm Roll capacity cold: 13 mm Roll dia upside: 340 mm Dia under roll - side rolls: 320 mm Power needed: 25 HP Weight: 16,6 ton

max thickness: 3 mm roller dia: 94 mm speed: 4m/min min bendradius for 90° elbow: - thickness 0,5 gt; 1,5 mm = radius 100 - thickness 1,5 gt; 2,25 mm = radius 150 - thickness 2,25 gt; 3 mm = radius 200 min bendradius for 180° elbow and ring: - thickness 0,5 gt; 1,5 mm = radius 150 - thickness 1,5 gt; 2,25 mm = radius 300 - thickness 2,25 gt; 3 mm = radius 450 power: 2 kW weight: 270 kg

Sheet thickness: 60,00 mm Bending length: 3000 mm Number of rolls: 4   Rolling width:                 3000mm Rolling thickness 3x toproll Ø:60mm Rolling thickness 5x toproll Ø:70mm Rolling thickness prebending:  55mm Top Roll Ø:                    660mm Bottom Roll Ø:                 650mm Side roll Ø:                   550mm Number of rolls:               4 Rolling speed:                 0 - 3 M/Min Adjustiment lower roll:        0 - 300mm/min. Adjustment side rolls:         0 - 300mm/min. Number of driven rolls:        2 Power:& ...

Roll dough part and knitting machine Type: Record Power: approx. 2000 pcs / hour Fully automatic machine Size 3 30-piece 30-90 grams with 3 knitting plates For dividing and cylindrical grinding of rolls. Condition: mechanically repaired

Hydraulic workpiece supports on both sides of the machine. Vertical hydraulic support on top of machine. 3 digital readouts Number of rolls: 4 rolls Roll capacity cold: 2550 x 10 mm Roll dia upside: 250 mm Dia under roll - side rolls: 250 mm Power needed: 9 kW Length: 4500 mm Depth: 1500 mm Hight: 1370 mm Weight: 7 ton

Gebrauchte Scheurer Walzenlinie.

Sheet thickness: 12,00 mm Bending length: 2500 mm Number of rolls: 4   CNC Brand: _Unknown / Other CNC Model: PASS 270 Rolling width:                 2500mm Rolling thickness 3x toproll Ø:10mm Rolling thickness 5x toproll Ø:12mm Rolling thickness prebending:  8mm Top Roll Ø:                    270mm Bottom Roll Ø:                 270mm Side roll Ø:                   215mm Number of rolls:               4 Rolling speed:                 0 - 6 Adjustiment lower roll:        200mm/min. Adjustment side rolls:         200mm/min. Control:      ...

Range of grammars: 35-85g Productivity: approx. 5100 pieces/ h Product-bun elongated, cut Machine after overhauling. Should you have any questions, please don't hesitate to contact us via phone or e-mail.

TECHNICAL DATA: 5-row machine Weight range: 45-70g Capacity: up to 4.500 pieces/h Product - round bread, stamped Condition: Excellent, after a full renovation Warranty: 6 months of parts warranty - worldwide

5-row machine for the production rolls, smooth round and double rolls. - Flexible, modular device concept - Device configuration adapted to the specific requirements of products - Made of stainless steel - Possibility of cooperation with a robot for loading sheets - Performance variables - Automatic production flow - Repeatable product quality - Division range: 35-85 g - Capacity: 4000 pcs / h - Dimensions: 2600x1150x2550 mm

Theline is in a good condition - it's ready for work. The set consists of 3 machines: 1)Koenig Classic Rex 5 rows 2)Koenig Intermediate Proofer with a stampler 3)Koenig Final Proofer Efficiency: 4.500 pieces / hour You can check the machine yourself in Warsaw (Poland). If you wish, I can send you a video of the workcycle!

Sheet thickness: 110,00 mm Bending length: 3500 mm Number of rolls: 4   CNC Brand: Siemens CNC Model: Siemens TOUCH Rolling width:                 3500mm Rolling thickness 3x toproll Ø:80mm Rolling thickness 5x toproll Ø:110mm Rolling thickness prebending:  90mm Top Roll Ø:                    900mm Top Roll Ø:                    900mm Bottom Roll Ø:                 800mm Side roll Ø:                   600mm Number of rolls:               4 Rolling speed:                 0-6 Adjustiment lower roll:        0-200mm/min. Adjustme ...

Sheet thickness: 14,00 mm Bending length: 2050 mm Number of rolls: 4   CNC Brand: _Unknown / Other CNC Model: CNC DAVI TOUCH Motorised Top support 1200 kg Hardned rolls 48-62 HR Rockwell C Conical bending attachment Minimum rolling diameter 270 mm   Rolling width:                 2050mm Rolling thickness 3x toproll Ø:12mm Rolling thickness 5x toproll Ø:14mm Rolling thickness prebending:  10mm Top Roll Ø:                    240mm Bottom Roll Ø:                 230mm Side roll Ø:                   180mm Number of rolls:               4 Rolling speed:                 6 Adjustiment  ...

Sheet thickness: 70,00 mm Bending length: 3050 mm Number of rolls: 4   Rolling width:                 3050mm Rolling thickness 3x toproll Ø:60mm Rolling thickness 5x toproll Ø:70mm Rolling thickness prebending:  50mm Top Roll Ø:                    630mm Bottom Roll Ø:                 600mm Side roll Ø:                   500mm Number of rolls:               4 Rolling speed:                 0 - 5 Adjustiment lower roll:        200mm/min. Adjustment side rolls:         200mm/min. Number of driven rolls:        2 Power:    & ...

Sheet thickness: 5,00 mm Bending length: 2500 mm Number of rolls: 4   Rolling width:                 2500mm Rolling thickness 3x toproll Ø:3,5mm Rolling thickness 5x toproll Ø:5mm Rolling thickness prebending:  2,5mm Top Roll Ø:                    150mm Bottom Roll Ø:                 150mm Side roll Ø:                   150mm Number of rolls:               4 Rolling speed:                 0-5 Adjustiment lower roll:        100mm/min. Adjustment side rolls:         100mm/min. Length:                     ...

4 rolls driven hydraulic with prebending cap at 500 mm length: 16 mm cap at 1000 mm length: 12 mm cap at 2000 mm length: 9 mm Number of rolls: 4x Roll capacity cold: 3050 x 8 mm Roll dia upside: 250 mm Dia under roll - side rolls: 200 mm Power needed: 10 hp Length: 5120 mm Depth: 1000 mm Hight: 1000 mm Weight: 6,3 ton

Lovent 2500

Viereck Brötchenalage Lippelt Rustica 240 / 220 - square bread roll Lippelt - Model: Rustica 240 / 220 -composed of - with dough pre-portioner (retrofitted in 2017) - with funnel tape - with dough dividing machine - with sprinkling unit - with settling tape - Year of construction 2006 (revised in 2017 and new dough funnels added)

30 division weights 35-115 g

Bread roll system Fortuna Premium S + Fortuna KM 4 - Bread roll system Fortuna Premium S 4 rows - Manufacturer: Fortuna Maschinenbau Holding AG - with pretzel spout - 400 volts 50Hz - 6.13 kW - Built in 2008 Head machine Fortuna KM4 - 400 volts 0 Hz - 1.2 kW - Built in 2002