plate rolls used for sale

sell used 60 he Pall diatomaceous earth-EK layers filter with 100 EK layers and 21 frames of diatomaceous earth

Size: 3,000 mm x 1,200 mm -no attacks -without pressing cylinders

Fryer Meyn 600-5000 TH -Thermal oil -Double stack -Sediment scraper

Length: 600 mm Width: 300 mm

Thawing transformer make TREKOLUX type EAGYear of construction 2000for thawing frozen water pipesMax. Power: 10AThawing i. Volts - 3 levels: 2.5 / 5 / 10VThawing performance 2,5 V: 400 AMinimum pipe length for 2 pipe: 4 mThawing performance 5V: 400AMinimum pipe length for 2 pipe: 8 mThawing power 10 V: 200 AMinimum pipe length with 1 pipe: 15 mExternal dimensions L x W x H: 350 x 250 x 250 mmWith- 5 m ground cable- 20 m ground cableused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

2pcs 3250 x 1885 x 400 mm

Face plate ring bending machine make IRLE type B 70Machine -No: 633 built in 1962in mechanical designTechnical specifications:smallest ring inner diameter: 120 mmlargest ring diameter: 650/1150/1650 mmBending capacity for flat flange: 70 x 30/60 x 60 x 1 50 x 12/40 x 40 x 6 mmmax.external profile dimensions: 60 x 60 mm3 faceplate speeds through gear shifting: 4, 6 and 9 rpm.Drive power: 4.0 HPWeight approx: 1200 kgusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

6 pcs 6400 x 1885 x 400 mm

Plate bend Ingkant SM 52; cleaned and tested; Table equipment; suitable for Heidelberg SM 52 plates. Plate bender SM 52; good condition; cleaned and checked; table top model; used for Heidelberg SM 52 plates.

Qty. 1 Second-hand roughing, finishing mills and special equipment Mfc.: DAVY, TMEIC, TOSHIBA, MITSUBISHI Type: 4-Hi Rev. Built: 1997 Revamped & Installed: 2008, 2011 Stopped in 7-2017 Revamped cost of USD 151.0 Mill. from 2008 up to 2011 Finishing mill equipped with CVC Roll plus Technology System Finishing mill – new hydraulic adjustment to increase rolling force to 90 MN Roughing & Finishing mills: Technology Control System (Level 1) Process Models (Level 2) for pass schedule calculation, profile & flatness control (PFC), Pacing system & Material tracking Revamped by SMS in 2011: Roughing mill: Slipper-type Spindles Product capacity: 2,000,000 ton/year Mill capacity: 30 Plates/h Entry Material: Slab T130~300 mm x W1,200~2,200 mm x L2,350~4,000 mm Final Product: Plate T5~180 mm x W1,200~4,100 mm x L max. 25 m Application: Ship building plate & Pipe pro ...

Printing plate bending for Heidelberg SM 52 Beil PB-S 52; good condition; cleaned and tested; Stand-up device; suitable for printing plates Heidelberg SM 52. Plate bender for Heidelberg SM 52 Beil PB-S 52; good condition; clened and checked; used for Heidelberg SM 52 plates.

Printing plate development machine Koenings KTW 653; good condition, cleaned and tested; 3 brushes; inlet width 650mm; suitable for waterless panels. Plate processor Koenings KTW 653; good condition; cleaned and checked; 3 brushes; width 650mm; Used for waterless plates.

M. No.: 1727/25

Technical details Cutting width= .40 - .000mm Machine weight approx.: 640 kg Room requirements LxWxH approx.: 1800 x 1350 x 1920mm The machine was little needed, very good condition Extract from the manufacturer Infosheet: Technical data > For single to medium series productionâ Maximum cutting depth: 40mm The machine is in a very well maintained and very good condition and can be visited at any time under electricity by appointment. Subject to changes and errors in the technical details and information provided. Round cuts from 40 to 1000mm - size II Round cuts from 40 to 1500mm - size III The machines P 2000 II and P 2000 III are stand machines in a stable steel construction. They cut cleanly, dimensionally, with a straight cutting edge all cutting-edgeable materials: such as rubber, felt, cardboard, plastics, fibres, graphite with and without inserts, et ...

The Peddinghaus FDB 600 plate processor from the Peddimat product range is suitable for automated drilling and oxy-fuel flame cutting of flat steel and steel sheets in steel construction. CNC control SIEMENS SINUMERIC drill diameter: min ø 8, max. ø 40 mm, inner coolant drilling system Number of drilling agregates:3 pcs. Cutting system: Autogen burning equipment total power requirement: 30 kW max. workpiece height: 600 x 50 x 6000 mm Min. material size: 80 x 8 mm sheet thickness - min.:6 mm sheet thickness - max.:50 mm dimensions of the machine ca.:2,4 x 2,4 x 2,8 m Lead roller conveyor: 6 m Outside roller conveyor: 1 m weight of the machine ca.: 6,5 t

Thyssen measuring plate / control plate made of natural hard rock Length: 3000 mm Width: 1500 mm Thickness: 300 mm Flatness tolerance according to DIN 876/0 Target value 16 μm Actual value 13.3 μm Identification number: 14286 2 x T-groove with base 6 x Wenzel Precision roll-off trestles Concentricity tester with height adjustment heavy design With T-groove stones High accuracy due to backlash-free rolling bearings Roller trestle can be adjusted in height for diameter compensation. RRP Pair 1890,-€ Item location: 42859 Remscheid Dismantling and transport by the buyer. The dismantling, loading, as well as transport can alternatively be offered by us.

Thyssen measuring plate / control plate made of natural hard rock Thyssen measuring plate made of hard rock (granite slab) Length: 2750 mm Width: 700 mm Thickness: 200 mm Total height with table: 1200 mm Height vertical plate: 240 mm Thickness: 200 mm 2 x T-groove Flatness tolerance according to DIN 876/0 Base with cabinet Trimos HGL 2000 length measuring instrument without measured value display Item location: 42859 Remscheid Dismantling and transport by the buyer. The dismantling, loading, as well as transport can alternatively be offered by us. More measuring plates in other sizes - new and used - can be found in our shop! International shipping costs on request!

GEA Plate heat exchanger NT50T CDS-10 with 10 plates in very good condition Material: 1.4405 Min./Max. permissible pressure: 0 bar / 6 bar (both sides) Min./Max. permissible temperature: 0.0 °C / 100 °C Test pressure: 7.8 bar Volume: 0.82 / 1.03 L Kerb weight: 83 kg Width: 320 mm Height: 670 mm Depth: 600 mm Connections: 2x Flange DN50 2x Flange DIN 11851 (milk pipe thread) Number of plates: 10 Last refrigeration/heat medium: water-glycol mixture Seals: EPDM

GEA Plate heat exchanger NT50T CDS-10 with 10 plates in very good condition Material: 1.4405 Built: 2007 Min./Max. permissible pressure: 0 bar / 6 bar (both sides) Min./Max. permissible temperature: 0.0 °C / 150 °C Test pressure: 7.8 bar Volume: 0.82 / 1.03 L Kerb weight: 88 kg Width: 320 mm Height: 670 mm Depth: 600 mm Connections: 2x Flange DN50 2x DIN 11851 (milk pipe thread) Last heat medium: steam Seals: EPDM

GEA plate heat exchanger VT10 CDS-16 with 10 plates in very good condition Built: 03/2006 Min/Max permissible pressure: 0 bar / 10 bar (both sides) Min./Max. permissible temperature: -10 °C / 100 °C Test pressure: 13 bar Volume: 3.0 / 3.3 L Kerb weight: 133 kg Width: 290 mm Height: 920 mm Depth: 570 mm Refrigeration/heat medium: propylene glycol Connections: 4x Pipe nipple DN 50 Device can be inspected at any time in 76694 Forest upon request.

6pcs of Skoda floor plates 6400x1885x400mm pirce 12000eur/pc 4pcs of Skoda floor plates 5600x1885x400mm price 10500eur/pc 2pcs of Skoda floor plates 3200x1885x400mm price 6000eur/pc

2pcs 3500 x 2000 x 350 mm

Plate punch HD/Nela SM 52; good condition; cleaned and tested; Table equipment; Punching 425mm Autoplate. Plate punch HD/Nela SM 52; good condition; cleaned and checked; table top machine; punch size 425mm autoplate.

Duck plate stacker G+J Platestacker 85; good condition, cleaned and tested; Working width 850mm; with plate trolley. Platestacker G+J Platestacker 85; good condition; cleaned and checked; working width 850mm; with plate trolley.

Plate punch Beil 780 S-H-APL-CTP-p; pneumatically; Punching 780mm Autoplate; puncture 11mm; suitable for MAN 700; compressed air required. Plate punch Beil 780 S-H-APL-CTP-p MAN 700; pneumatic; punch size 780mm autoplate; depht 11mm; used for MAN 700; Need pneumatic air.

Alu clamping table - clamping block Offer number: 18285 Make: xxxxx Type: xxxx Machine Number: 18285 Built: xxxx Technical data: - Plate surface well preserved - Length approx. 1540 mm - Width approx. 1540 mm - Height approx. 410 mm - Plate thickness 20 mm - 6 pcs screw-on - bars 50 x 20 mm - various holes partly with thread - Intermediate bars between the upper plate and under the support surface - 4 towing eyes - Weight approx. 180 kg

M. No.: 3463 / 18 (91.144.1301/021) Max. Format: B1

M. No.: 458/08 (C.2.144.1301/02) Max. Format: B1 Voltage : 100-240V // 300-330VA // 50/60Hz

Electrical magnet size 1000 x 300m 110 volt supply IP 66

Printing plate punch/lacquer plate punch for Heidelberg XL 145/162; good condition; cleaned and tested, perforation 1200mm autoplate. Plate punch/ plate punch for varnish plates for Heidelberg XL145/162; good condition; cleaned and checked; hole size 1200mm autoplate.

Used Electromagnetic clamping plate , from ABA grinding machine Technical data: Length: 600 mm Width: 300 mm

Sheet filter, Plate Filter SEITZ ORION-C 60 with hydraulic pressure UNI-29-500 Manufacturer: SEITZ Type: ORION-C 60 Measurements: Length: 3300 mm Width: 1000 mm Height: 1300 mm Filter plates: Stainless steel plates V2A 2 x end plates 32 x sheet plates 60 x 60 cm Operation manual available!

Plate plate made of cast iron with longitudinal grooves and mounting holes, manufactured according to DIN876, the T - grooves manufactured according to DIN650 - H12. - 4 plates with dimensions 3,000 mm x 1,200 mm x H 300 mm.

Clamping plate 5,000 mm x 2,000 mm x H 400 mm made of cast iron with 10 pieces T - grooves with 35 mm width, manufactured according to DIN876, the T - grooves manufactured according to DIN650 - H12.

Clamping plate 5,000 mm x 1,980 mm x H 300 mm made of cast iron, with 6 pieces T - grooves with 35 mm width, manufactured according to DIN876, the T - grooves manufactured according to DIN650 - H12.

Plate circular saw Finesse vertical Format 510 x 205 cm 2 seed units (1 x horizontal, 1 x vertical) L x W x H: 620 x 260 x 100 cm Weight approx. 700 kg Built in 1975 The machine is in good condition, ready for operation. Changes, mistakes, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

M. No.: 121

Printing plate development machine Agfa Elantrix 125 HX; good condition; cleaned and tested; Inlet width max.1250mm, min.200mm; Plate length max.1500mm, min.315mm; Plate thickness 0.15-0.50mm; Cooler. Plate processor Agfa Elantrix 125 HX; good condition; cleaned and checked; max plate width 1250mm, min.200mm; max.plate lenght 1500mm, min.315mm; plate thikness 0.15.0,50mm; cooling unit.

Thermal Plateprocessor Manufacturer: AGFA Model: Elantrix 125 SX year 2016 (incl. AGFA Amigo KIT) Price: on request

Pneumatic plate punch INGEKBA Rapida 142; good condition: perforation 780mm autoplate; investment contact; compressed air required. Pneumatic plate punch KBA Rapida 142; good condition; punch size 780mm autoplate; feeder control; Compressed air needed.

New, reinforced and smooth-running beverage market cart from the manufacturer Katschotec with an additional basket for small parts. The trolley is not only ideal for beverage markets, but is also frequently found in DIY stores and electrical stores. Our B-goods are new goods with small flaws, such as .B small paint defects. Technically/functionally, our record trolleys are absolutely flawless. With us you will receive a product with an excellent price-performance ratio. Technical data: • Manufacturer: Katschotec • Total dimensions (LxWxH): 970 x 525 x 40 mm • Dimensions platform (LxB): 740 x 470 mm • Dimensions basket (HxTxL): 250 x 170 x 485 mm • Stack depth: 230 mm • Stable flat oval tube construction with round tube handle • Ergonomically shaped handle protection caps • 4 steering wheels • Weight: 21 kg These are plate wagons with unbraked rollers.  ...