129,808 used machines on RESALE, but how to find them? Machine Search
A two-roll plate rolling machine Fasti is available. Roll diameter: 130mm, working width: 2150mm, max. sheet thickness: 3.5mm. Machine dimensions X/Y/Z: approx. 2900mm/650mm/1100mm, weight: approx. 1200kg. Documentation available. An on-site inspection is possible.
A hydraulic 3-roll plate rolling machine Omcca is available. Working length: 2050mm, max. plate thickness rolling/pre-bending: 8mm/6mm, roll diameter: 200mm. Machine dimensions X/Y/Z: approx. 3200mm/900mm/1500mm, weight: approx. 3300kg. On-site inspection is possible.
Set of 70 bearing housings and roller bearings, SKF, SNR, INA… , mint condition Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Mint condition! - never been used and is in mint condition, - comes from a spare parts warehouse of a certified production facility, An exceptional special price of € 6 per item, excluding VAT. The original price is at least 10 to 15 times higher. We can divide the bearings into 3 groups: 1) Approx. 44 pieces in original cardboard packaging 2) Approx. 15 pieces in original foil packaging 3) Approx. 11 pieces open, unused, fully functional bearings. See stock list on photo. Minor defects of 1-2% possible. These are brand-name products only. Due to the extremely low package price, we cannot offer any guarantee/warranty in this case. For these goods, we must exclude the buyer's war ...
Lot of approx. 265 small roller bearings, SKF, FAG, INA, , mint condition Please note: This is an original product and not a replica from... Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Mint condition! - never been used and is in mint condition, - comes from a spare parts warehouse of a certified production facility, An absolute special price of € 0.7/piece excluding VAT. The total original price is at least 7 to 10 times higher. We can divide the bearings into 3 groups: 1) Approx. 225 pieces in cardboard or foil original packaging, including one item with 50 pieces (various SKF items such as minimal bearings, seal sets, etc.). Many bearings are from a large package where the individual bearings are not packaged. 2) Approx. 40 open, unused, fully functional bearing units. See bearing list on photo. Minor erro ...
Key data: 1000 mm, 450 mm
Comerio Two Roll Mill 1m (40”) wide x 450mm diam. Motorised nips Tray fitted beneath Mill rolls Motor mounted beneath roll AC 3-phase 400V Complete with Control Panel
used
Qty. 1 Second-hand 20-Hi Sendzimir Rolling Mill Mfc.: SUNDWIG, PAULY, ABB, Schneider Type: 20-HI – WV 20 SHE Built: 1988 Revamping: 2018 Mechanical & electric including new AGC and X-ray thickness gauge Strip width: 300 – 670 mm Thickness: 0.8 mm Exit: 0.01 mm Rolling speed: 300/500 m/min. Rolling materials: Stainless steel, Copper, Invar, Nickel, Si steel, Mo, Ti
Professional rolling pin, rolling pin, dough roll 40cm NEWâ€â Product description:• New• made of steamed beech wood• turned from one piece• large special ball bearings• special axles, secured against the loosening of the handles• Wooden rollers are oiled• Made in Germany• €¢: 9 cm• Length without handles: 40 cm• Total length: 67 cmDetails see pictures
Professional rolling pin, rolling pin, dough roll 30cm NEWâ Product description:• New• made of steamed beech wood• turned from one piece• large special ball bearings• special axles, secured against loosening of the handles• wooden rollers are oiled• Made in Germany• €¢: 9 cm• Length without handles: 30 cm• Total length: 57 cmDetails see pictures
Professional rolling pin, rolling pin, dough roll 35cm NEWâ€â Product description:• New• made of steamed beech wood• turned from one piece• large special ball bearings• special axles, secured against the loosening of the handles• Wooden rollers are oiled• Made in Germany• €¢: 9 cm• Length without handles: 35 cm• Total length: 62 cmDetails see pictures
Professional rolling pin, rolling pin, dough roll 25cm NEWâ€â Product description:• New• made of steamed beech wood• turned from one piece• large special ball bearings• special axles, secured against loosening of the handles• Wooden rollers are oiled• Made in Germany• €¢: 9 cm• Length without handles: 25 cm• Total length: 52 cmDetails see pictures
Large slewing bearings, slewing ring, single-row ball slewing ring, four-point bearing -comes from: HUSS Rides, manufacturer of leisure facilities -Replacement part: from Top Junior 70011-15 -Manufacturer: Rothe Erde -Type: 2-060-40-0490-001 63132-609 -Type: 2.060.40.0490.001 63132.609 -Outer diameter: 625 mm -Inner diameter: 354 mm -Height: 90 mm -Quantity: 3x available in storage -Price: per piece -Weight: 122 kg
A Frenco workshop gear testing device is available. Bed length: 590mm, min. center distance: 45mm, max. center distance with fine adjustment/without fine adjustment/without intermediate plate: 105mm/155mm/320mm, repeatability: 1.5µm, intermediate plate length: 210mm, max. worm diameter: 78mm, center distance (worm lengths): 0mm-220mm, measuring table dimensions X/Y/Z: 800mm/700mm/940mm. Machine dimensions X/Y/Z: approx. 1200mm/800mm/1750mm, weight: approx. 330kg. Documentation available. An on-site inspection is possible.
Qty. 1 Second-hand 4-Hi Skin Pass Rolling Mill Mfc.: Sir James Farmer Norton Type: 4 - High Temper Mill 318/610 x 710 mm Built: 1977 Stopped: 2025 Strip Width: 300 – 650 mm Thickness: 0.1 – 1.5 mm Max. Tensile Force 2.860 kg, Coil weight: 10 T
Qty. 1 Second-hand Sendzimir Cold Rolling Mill Mfc.: INNSE Type: ZR23 C-25 – 20-Hi Built: 1977 Stopped: 2025 Steel grades: HSLA, low and high carbon steel, etc. Strip width: 300 - 650 mm Thickness: 0.05 – 3.0 mm Max. tensile force: 15.000 kg Coil weight: 10 T AGC & PLC system: ABB
Qty. 1 Second-hand 2-Hi Skin Pass Rolling Mill Mfc.: Sir James Farmer Norton Type: 2 - High Temper Mill 318/610 x 710 mm Built: 19 Stopped: 2025 Strip Width: 300 – 600 mm Thickness: 0.3 – 4.0 mm Max. Tensile Force 3000 kg, Coil weight: 10 T
used
Qty. 1 Second-hand Reversing 4-Hi Cold Rolling Mill Mfc.: NKMZ, ABB, Grip Engineering, Launer Engineering Built: 1972 Type: Reversible Cold Rolling Mill (Quarto-1800) The cold rolling stand has been modernized by ABB in 1995. The mill was fitted with automatic gauge control (AGC), flatness control unit (AFC), spot cooling system (by Grip Engineering), and work roll changing device (by Launer Engineering). Besides, the mill has been equipped with a horizontal rolling Oil filtration system (by Launer Engineering). Flatness & AGC control: available /1995
A granite three-roll mill, presumably made by Bauermeister, which was used for marzipan, is available. On-site inspection is possible.
Dimensions per tray: 2000 x 1300 mm with a total of 40 sheeting trays Reference: Pieper - Lot 9 Auction-ID: A7-46763-5
Total load 200 kg, floor load 80 kg Auction-ID: A1-46781-20
Equipped with drive! Approx. 2 to 4 tons; remote control included; Auction-ID: A1-41997-96
used chamber filter records 1000 x 1000 PP approx. 190 pieces in the camp
Krings Verbau various base plates with mounting plate dimensions, spindles, etc. in the package or individually for sale Mass and guide can be requested to e-mail Price VB
Straightening plate measuring plate measuring plate reinforced plate made of steel casting used. Length approx. 3560 mm Width approx. 985 mm Height approx. 910 mm (adjustable) with 5 feet Casting tear ingenuous plate with height-nivelable feet, support ball-bearing Subject to changes and errors in the technical data, dates and prices as well as intermediate sale.
Base plate, turntable, machine vice -Base plate with angle scale -Dimensions: see photos -Dimensions total: Ø 395 x 50 mm -Weight: 18.6 kg
BPR 50/55D #101692861161 used Operating hours 491,4h Auction-ID: A7-47086-50
max. plate width: 80 cm stamp width: 425 mm serial no.: 174 plate punch autoplate The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. plate width: 80 cm stamp width: 425 mm serial no.: 564 plate punch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. plate width: 55 cm stamp width: 220 mm serial no.: 10101/09 plate clamping system: autoplate plate punch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. plate width: 55 cm stamp width: 220 mm serial no.: 10101/09 weight: 12 kg dimensions of press (L x W x H): 70 x 13 x 55 cm plate clamping system: Autoplate for QM 46 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. plate width: 80 cm stamp width: 425 mm serial no.: 1132 Plate punch for Heidelberg S-Offset The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. plate width: 80 cm stamp width: 425 mm serial no.: 5136 Plate punch for Heidelberg S-Offset The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. plate width: 52 cm stamp width: 220 mm serial no.: 16548 plate punch for GTO or QM 46 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. plate width: 50 cm stamp width: 220 mm serial no.: 4184/20 Dimensions (L/W/H): 60x20x50 mm plate punch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. plate width: 920 cm stamp width: 425 cm Dimensions (L/W/H): 550/1000/1220 cm plate punch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. plate width: 74 cm stamp width: 340 mm serial no.: 13434 dimensions of press (L x W x H): 80 x 95 x 120 cm weight: 100 kg Thermo plate bender for The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. plate width: 52 cm stamp width: 220 mm serial no.: 3851/15 Dimensions (L/W/H): 60x20x50 mm plate punch QM 46 or GTO The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. plate width: 1520 cm stamp width: 780 mm dimensions of press (L x W x H): 150 x 58 x 128 cm plate punch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
stamp width: 425 mm serial no.: 6660/39 Dimensions (L,W): 71 x 55 cm plate punch for SM 52 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Baking Plate / Stone Plate / Oven Plate for Miwe Condo 1225x815x13mm NEWBack Plate / Stone Plate for Miwe Condo Oven Dimensions : 1225 mm x 815 mm x 13 mm Thickness 13mm Weight 25kgwe have other size and assortment in stock Details see pictureAttention: No shipping only pickup. Shipping by forwarding agent from 10 pieces on requestÂ
Baking plate / stone plate / oven plate for quail Piccolo 600x865x15mm NEWBack plate / stone plate for quail Piccolo oven dimensions: 600 mm x 865 mm x 15 mm thickness 15mm Weight 16kgwe have other size and assortment in stock Details see pictureAttention: No shipping only pickup. Shipping by forwarding company from 10 pieces on request
Straightening plate spotting plate 700 x 500 mm Panel size: 700 x 500 mm Solid panel thickness: 55 mm Total height: 880 mm Auction-ID: A7-46417-17
\" Precision base plate from the measuring room. Probably adapter or mounting plate for measuring arm (e.g. Faro or comparable systems). Very stable design with integrated shim/magnet elements. Ideal as a test or reference tool. • Marking: KF29416E1. JP1 • Further embossing: 7718-15:01 / B-9-1712 • Test marking \"Test aid\" • Material: steel / tool steel • Solid industrial design • Central bore • Several recessed round elements (shim/magnet body) • Origin: Measuring room / quality assurance \" Auction-ID: A7-46417-317
Marking plate / measuring plate with tripod and holder Used marking or measuring plate with attached tripod and adjustable holder, suitable for marking, testing and measuring work in tool and machine construction. • Design: marking plate / measuring plate • Surface: finely machined, grid structure • Dimensions plate: approx. 250 × 360 mm • Plate thickness: approx. 34 mm • Material: Steel / cast iron • With column stand and adjustable holder Auction-ID: A7-46417-109
Heavy, solid steel clamping plate with several T-slots for workpiece clamping. Suitable for milling machines, slotting machines or as a universal clamping plate. Good substance, flat surface, usual traces. • Length: approx. 700 mm • Width: approx. 700 mm • Height: approx. 100 mm • Groove type: T-slots • Groove size: approx. 28 mm • Number of grooves: several (parallel) • Material: steel • Finish: solid Auction-ID: A7-46417-93
Medal China Panda Silver Plated Inner Part Gold Plated PP 30.86 gr
Face plate, face plate chuck, face launder chuck with 6x T-slots 35x35 mm Auction-ID: A1-47017-32
Face plate, face plate chuck, face launder chuck with 12x T-slots 40x40 mm Auction-ID: A1-47017-31
Type: Plate beveling machine / edge milling machine Manufacturer: Promotech Model: ABM-14 CE Marked: Yes Power supply: 3~ 400 V + PE, 50–60 Hz Power: 2200 W Spindle speed: 9 rpm (50 Hz) / 11 rpm (60 Hz) Bevel angle range: 30° (standard) Optional angles: 22.5°, 25°, 35°, 37.5°, 45° Bevel width: up to 14 mm Max. bevel per pass: 12 mm (in 392 MPa carbon steel) Min. plate thickness: 6 mm Max. plate thickness: 40 mm Min. plate width: 55 mm Min. pipe inner diameter: 100 mm Working speed: approx. 2.6 m/min (50 Hz) / 3.1 m/min (60 Hz) Condition: Used, not tested Remarks: Portable beveling machine for steel plates and pipes; suitable for weld preparation; adjustable angle; visible signs of use; see photos for details Own mass: approx. 65 kg Dimensions (L x W x H): approx. 600 x 400 x 500 mm Auction-ID: A7-47063-19
maximum number of results exceeded
please refine your search
3 € 
