plate roll bending used for sale

Working width: 2500mm, max. sheet thickness: 20mm, with optical display of roller adjustment, central lubrication, cone bending device and overrun brake.

Working width: 3000mm, max. sheet thickness: 15mm, with digital display of roller adjustment, driven rollers, mobile control panel, cone bending device, upper and lateral cylinder support device.

Working width: 3000mm, max. sheet thickness: 12mm, with digital display of roller adjustment, central lubrication, air cooling, cone bending device and CNC controls.

Working width: 2500mm, max. sheet thickness: 20mm, lateral cylinder support device with three adjustable support rollers and conical bending device, machine provided for exchangeable top rollers up to min. Ø 450mm, machine revision 2009, factory inspection 2012.

Working width: 3000mm, max. sheet thickness: 110mm, with CNC control, central lubrication, cone bending device, infeed carriage, one upper and two lateral cylinder support devices.

Working width: 3000mm, max. sheet thickness: 120mm, with optical display of roller adjustment, central lubrication, cone bending device, overrun brake and exchange top roller Ø820mm and Ø740mm.

Working width: 2000mm, max. sheet thickness: 13mm, can be used horizontally and vertically, with decoiler, decoiler driven and hydraulically adjustable to coil diameter.

Working width: 1250mm, max sheet thickness: 3mm, with loading table, vacuum lifter, feed table with rollers, ejector, output table, control panel and manual, inspection is possible, available from March 2024.

Working length: 3100mm, sheet thickness rounding/ bending: 40/32mm, top/side roll diameter: 460/ 420mm, connected load: 30kW, with documentation, on-site inspection is possible.

Sheet thickness: 7,00 mm Bending length: 1000 mm Number of rolls: 1   Max plate thickness : 7 mm Min. rolling diameter : 760 Max. rolling diameter : 600 Top Shaft diameter : 110 Lower rolls diameter : 120 Max. bending power : 350.000 N Rolling width        1,000 mm Rolling thickness prebending       7 mm Number of rolls     1 Number of driven rolls       1 Power     2.4 kW

Sheet thickness: 6,00 mm Bending length: 1000 mm Number of rolls: 1   MACH - ID 6112 Make:ROUNDO Type:PM 22 YOP:2007 Max plate thickness : 6 mm Min. rolling diameter : 160 Max. rolling diameter : 600 Top Shaft diameter : 110 Lower rolls diameter : 120 Max. bending power : 350.000 N Rolling width   1,250 mm Rolling thickness prebending      6 mm Number of rolls      1 Number of driven rolls    1 Power       5.4 kW

Sheet thickness: 13,00 mm Bending length: 3100 mm Number of rolls: 4   CNC Brand: _Unknown / Other CNC Model: Smart Pro SPECIFICATIONS Controll  Smart - Pro Hydraulic / Mechanical   Hydraulic        3 or 4 roll   4 roll Maximum sheet thickness   13 mm Bending length   3100 mm Max. Rolling capacity Ø 2.500   13 mm Max. Prebending capacity Ø 2.500    10 mm Top Roll Ø  280 mm Bottom Roll Ø   260 mm Side Rolls Ø  260 mm Power  15 Hp kW

Sheet thickness: 40,00 mm Bending length: 5000 mm Number of rolls: 4   MACH-id   3552 MAKE   Haeusler Swiss TYPE   VRM - HY YEAR   1983 SPECIFICATIONS Hydraulic / Mechanical   Hydraulic 3 or 4 roll   4 roll Maximum sheet thickness   40 mm mm Bending length   5000 mm Max. Rolling capacity Ø 2.500   35 mm Max. Prebending capacity Ø 2.500  30 mm Top Roll Ø  570 mm Bottom Roll Ø  460 mm Side Rolls Ø   460 mm

Sheet thickness: 40,00 mm Bending length: 3000 mm Number of rolls: 4   SPECIFICATIONS Controll   Conventionel Hydraulic / Mechanical  Hydraulic   3 or 4 roll   4 roll Maximum sheet thickness  40 mm Bending length  3000 mm Max. Rolling capacity Ø 2.500  38 mm Max. Prebending capacity Ø 2.500  25 mm Top Roll Ø  460 mm   Bottom Roll Ø  460 mm Side Rolls Ø  390 mm Power  55 kW  

Sheet thickness: 30,00 mm Bending length: 3250 mm Number of rolls: 4   SPECIFICATIONS Controll  Conventionel Hydraulic / Mechanical   Hydraulic 3 or 4 roll   4 roll Maximum sheet thickness   30 mm Bending length   3250 mm Max. Rolling capacity Ø 2.500  30 mm Max. Prebending capacity Ø 2.500   18 mm Top Roll   Ø  420 mm Bottom Roll Ø  330 mm Side Rolls Ø  320 mm Power  22 kW Working speed M/Min.4 M/min  

Sheet thickness: 20,00 mm Bending length: 3250 mm Number of rolls: 4   SPECIFICATIONS Controll   Conventionel Hydraulic / Mechanical   Hydraulic   3 or 4 roll   4 roll Maximum sheet thickness   20 mm Bending length   3250 mm Max. Rolling capacity Ø 2.500   20 or 25 mm on 3000 width mm Max. Prebending capacity Ø 2.500   13 mm Top Roll Ø   380 mm Bottom Roll Ø  380 mm Side Rolls Ø  300 mm Power20 kW Working speed M/Min.4 M/min  

Sheet thickness: 13,00 mm Bending length: 2000 mm Number of rolls: 3   Make Faccin 13 mm Type DP3 - 2021 Year 2008 3 roll hydraulic plate bender Sheet thickness (mm) Rolling = 13 mm Bending length (mm) Pre bend = 9 mm Number of rolls Length = 2.000 Top roll = 215 Lower roll = 195 Power = 10 Hp Digital read out hydraulic drop end    

Sheet thickness: 2,00 mm Bending length: 1050 mm Number of rolls: 2   SPECIFICATIONS Controll   MG CNC   Hydraulic / Mechanical  Hyrdaulic 3 or 4 roll  2 Urethan Maximum sheet thickness  2 mm Bending length  1050 mm Top Roll Ø  100 mm Bottom Roll Ø  300 mm Power  5.5 kW  

Sheet thickness: 40,00 mm Bending length: 3050 mm Number of rolls: 4   SPECIFICATIONS Controll  Conventionel   Hydraulic / Mechanical Hydraulic   3 or 4 roll   4 roll Maximum sheet thickness   40 mm Bending length   3500 mm Max. Rolling capacity Ø 2.500   40 mm Max. Prebending capacity Ø 2.500  35 mm Top Roll Ø  500 mm Bottom Roll Ø400 mm Side Rolls Ø  400 mm Power  55 kW

Sheet thickness: 60,00 mm Bending length: 3000 mm Number of rolls: 4   SPECIFICATIONS Controll   Conventionel Hydraulic / Mechanical   Hydraulic   3 or 4 roll    4 roller Maximum sheet thickness   60 mm Bending length   3000 mm Max. Rolling capacity Ø 2.500   60 mm Max. Prebending capacity Ø 2.500   45 mm Top Roll Ø  560 mm Bottom Roll Ø  540 mm Side Rolls Ø  400 mm Power   55.5 kW Working speed M/Min. 2 + 4 M/min.  

Sheet thickness: 140,00 mm Bending length: 3050 mm Number of rolls: 3   SPECIFICATIONS Controll   Conventionel Hydraulic / Mechanical   Hydraulic 3 or 4 roll3 roller Maximum sheet thickness   140 mm Bending length   3050 mm Max. Rolling capacity Ø 2.500   140 mm Max. Prebending capacity Ø 2.500   90 mm Top Roll Ø  900 mm Side Rolls Ø 820 mm Power  162 kW  

Sheet thickness: 10,00 mm Bending length: 8000 mm Number of rolls: 4   CNC Brand: _Unknown / Other CNC Model: PC Windows SPECIFICATIONS Controll  Faccin PC WINDOWS Hydraulic / Mechanical  Hydraulic   3 or 4 roll 4 roll   Maximum sheet thickness 10 mm Bending length  8000 mm Max. Rolling capacity Ø 2.500  10 mm Max. Prebending capacity Ø 2.500  6 mm Top Roll Ø  320 mm Bottom Roll Ø 440 mm Side Rolls Ø 340 mm Power 37 kW  

Sheet thickness: 100,00 mm Bending length: 600 mm Number of rolls: 3   SPECIFICATIONS Controll Conventionel Hydraulic / Mechanical  Hydraulic  3 or 4 roll  3 roll Maximum sheet thickness  100 mm Bending length  600 mm Max. Rolling capacity Ø 2.500   100 mm Max. Prebending capacity Ø 2.500  80 mm Top Roll Ø 500 mm Side Rolls Ø 350 mm  

Sheet thickness: 10,00 mm Bending length: 2000 mm Number of rolls: 4   SPECIFICATIES Besturing   Conventionel Werking Hydraulisch / Mechanisch Hydraulic 3 of 4 rollenwals  4 roller Plaatdikte  10 mm Wals lengte in mm  2000 mm Max. wals dikte bij product   Ø 2.500   10 mm Max. aanbuiging bij product Ø 2.500    6 mm Boven rol diameter Ø  210 mm Onder rol diameter Ø  170 mm Zij rollen diameter Ø  170 mm Vermogen kW  10 kW  

Sheet thickness: 25,00 mm Bending length: 3100 mm Number of rolls: 4   SPECIFICATIES Besturing  SIEMENS PANEL Werking   Hydraulisch / Mechanisch Hydraulic3 of 4 rollenwals  4 roll Plaatdikte  25 mm Wals lengte in mm  3100 mm Max. wals dikte bij product Ø 2.500  20 mm Max. aanbuiging bij product Ø 2.500  10 mm Boven rol diameter   Ø370 mm Onder rol diameter    Ø370 mm Zij rollen diameter Ø260 mm Werk snelheid in M/Min.  0 - 4 M/min. AFMETINGEN Lengte  6950 mm Breedte  2180 mm Hoogte2100 mm  

Sheet thickness: 20,00 mm Bending length: 2000 mm Number of rolls: 3  

Sheet thickness: 48,00 mm Bending length: 3100 mm Number of rolls: 3   Make Faccin 48 mm Type 3 HEL Year 1998 Hydraulic 3 roll plate bender Sheet thickness (mm)Bend = 48 mm Bending length (mm)Pre = 40 mm Number of rolls Length = 3.100 Top roll = 500 / 480 side Power 80 Ps Hardned rolls  

Sheet thickness: 60,00 mm Bending length: 3000 mm Number of rolls: 4   CNC Brand: _Unknown / Other CNC Model: Haeusler CNC

Sheet thickness: 10,00 mm Bending length: 2550 mm Number of rolls: 4   Make Famar 10 mm Type QI 418 Year 1999 4 roll hydraulic plate bender Sheet thickness (mm)Tickness = 10 mm Bending length (mm)Pre bend = 8 mm Number of rollsLength = 2.550 mm Roll = 250 / 220 mm incl. top support incl. side support incl. conical bending incl. 3 digital readout Fully hydraulic machine  

Sheet thickness: 20,00 mm Bending length: 3000 mm Number of rolls: 4   Make Davi MCB 20 mm Type MCB 3034 Year 1997 Hydraulic 4 roll plate bender Sheet thickness (mm) Bend = 20 mm Bending length (mm) Pre = 16 mm Number of rolls Length = 3000 Top roll = 340 mm Conical bending Hydraulic machine / drop end Digital readout side rolls Power 25 Hp  

Sheet thickness: 40,00 mm Bending length: 3050 mm Number of rolls: 4   Make Haeusler 40 mm Type VRM HY Year 1980 4 roll plate bender hydraulic 2 rolls driven Sheet thickness (mm)Bend = 40 mm Bending length (mm)Pre = 25 mm Number of rolls Length = 3.050 Top roll = 485 mm Conical bending 55 kW / 40 Ton

Sheet thickness: 45,0 mm Bending length: 2500 mm Number of rolls: 4   Make Stolting 45 mm Type VB 2500 / 40 Year1995 4 roll hydraulic plate bender Sheet thickness (mm)Bend = 45 mm Bending length (mm)Pre = 35 mm Number of rolls L = 2.500 mm Top roll = 480 Work speed = 0 - 6 M / MinConical bending- incl. top support - incl. side support - incl. digital read out - incl. lubrication  

Sheet thickness: 4,0 mm Bending length: 2000 mm Number of rolls: 3   Make Faccin 4 mm Type ASI / M Year 1996 Asymetric 3 roller Sheet thickness (mm)Thick = 4 mm Bending length (mm)Length = 2.000 Number of rolls  3 Digital read out Foot switch L & R Mot. side roll CE Safety  

Sheet thickness: 35,00 mm Bending length: 1000 mm Number of rolls: 4   CNC Brand: _Unknown / Other CNC Model: Roundo CNC

Sheet thickness: 60,00 mm Bending length: 4000 mm Number of rolls: 4   Make Haeusler 4000 x 60 Type VRM-HY 4000 x 60/50 mm Year 2000 Haeusler VRM-HY 4000 x 60/50 mm rundbiegemaschine Sheet thickness (mm) 60 Bending length (mm)4000 Number of rolls 4 rolls CNC machine Toproll 710 mm, Toproll 640 mm, Side roll 520 mmExtra Smaller top roll of 440 mm Top Support Big side support  

Sheet thickness: 120,00 mm Bending length: 3050 mm Number of rolls: 4   Make Faccin 120 mm Type 4 HEL 3186 Year 2011 Faccin 4 hel 3186 120 mm blechwalze platebender Sheet thickness (mm)T = 120 mm Bending length (mm)L = 3.050 mm Number of rolls 4 rollerTop roll = 860 mm Power = 225 Ps Weight = 160.000 Kg NC Siemens Simatec Top support Side support Conical bending New Euro 1.200.000  

Sheet thickness: 18,00 mm Bending length: 3000 mm Number of rolls: 3   Make Roundo 18 mm Type PS 310 Year 1980 3 roll hydraulic plate bender Sheet thickness (mm) T = 18 mm Bending length (mm) L = 3.000 mm Number of rolls 3 roller Top roll = 310 mm Hydraulic opperated Dro positions side rolls  

Sheet thickness: 18,00 mm Bending length: 2550 mm Number of rolls: 4   Make Roundo 18 mm Type PS 280 Year 1988 3 roll plate bender Sheet thickness (mm) T = 18 mm Bending length (mm) L = 2.550 mm Number of rolls 3 roller Optical read out position Hardned rolls Hydraulic machine  

Sheet thickness: 10,00 mm Bending length: 3100 mm Number of rolls: 4   Make MG 10 mm Type MH 308 B Year 2006 4 roll hydraulic plate bender mg blechrundbiege Sheet thickness (mm)T = 10 mm Bending length (mm)L = 3.100 mm Number of rolls 4 roll Pre bend = 6 mm Top rol = 230 mm Lower rol = 220 incl. Hydr. side support incl. CNC Control  

Sheet thickness: 45,00 mm Bending length: 2500 mm Number of rolls: 4   Make Stolting 45 mm Type VB 2500 / 45 Year 1954 roll hydraulic plate rolls rundwalze blechbiege Sheet thickness (mm) Bend = 45 mm Bending length (mm) Pre = 35 mm Number of rolls Length = 2500 Top rol 480/480/390 sideTop & side support Digital readout pos. rolls  

Sheet thickness: 10,00 mm Bending length: 2050 mm Number of rolls: 4   Make MG 10 mm Type MH 2010 B Year 2009 4 walzen rundbiege plate roll blechrundbiege mg Sheet thickness (mm) T = 10 mm Bending length (mm) L = 2.050 Number of rolls Pre = 6 mm Top roll = 210 2 rolls driven Digital read out Hardened rolls 55 Hrc Fully hydraulic CE Saftety  

Sheet thickness: 6,00 mm Bending length: 2050 mm Number of rolls: 3   Make Faccin 6 mm Type Asi 2015 Year 2005 3 roll plate bender blechwalze plaatwals wals Sheet thickness (mm) Rolling = 6 mm Bending length (mm) Length = 2.050 Number of rolls Pre = 4 mm Top roll 150 mm Digital readout pos. roll Hardned rolls  

Sheet thickness: 4,00 mm Bending length: 3000 mm Number of rolls: 3   Make Davi 3.000 x 2 Type MAS 3014 Year 09 - 2002 3 roll hydraulic plate bender Sheet thickness (mm)T = 4 mm Bending length (mm) L = 3.000 mm Number of rolls side roll 140 mm 400 v / 2 Hp  

sheet width: 2570 mm plate thickness: 2,5 mm pre-bending capacity: 1,8 mm diameter of upper rolls: 140 mm total power requirement: 2,2 KW weight of the machine ca.: 1,93 t dimensions of the machine ca.: 3730 x 800 x 1100 mm Basic equipment: - Conical bending device - Swiveling top roller - Conical bending device - driven top roller - Pre-bending device - brake motor - Safety device emergency leash - CE certified - documentation Options: Electrically adjustable rear roller Digital display for rear roller Hardened rollers The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2570 mm plate thickness: 6 mm pre-bending: 8 mm diameter of upper rolls: 210 mm roll diam. bottom roll: 190 mm speed: 5 m/min total power requirement: 7,5 KW weight of the machine ca.: 4,67 t dimensions of the machine ca.: 3,9 x 1,4 x 1,25 m Basic equipment: - Conical bending device - Swiveling top roller - Electrically adjustable rear roller - Conical bending device - driven top roller - Pre-bending device - brake motor - Safety device emergency leash - CE certified - documentation Options: Digital display for rear roller Hardened rollers 2 driven roller Rolling extension The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hydraulic bending roll Variable speed Conical bending Two digital readouts Number of rolls: 4 rolls Roll capacity cold: 3100 x 14 mm Roll dia upside: 280 mm Dia under roll - side rolls: 280 - 220 mm Power needed: 10 hp Length: 6450 mm Depth: 1700 mm Hight: 1600 mm Weight: 11,5 ton

Schafer SRMVHY 3100 x 20 mm Number of rolls: 3 rolls Roll capacity cold: 20 mm Length: 6500 mm Depth: 5000 mm Hight: 4800 mm

ZM 1500 x 11 mm CNC Number of rolls: 3 rolls Roll capacity cold: 11 mm Length: 4200 mm Depth: 1200 mm Hight: 1500 mm

Very high-quality CNC – controlled precision sheet metal bending machine with automatic bending sequence calculation – automatic, CNC – controlled double-sided pre-bending – conical bending device Roll diameter 350 mm Smallest weft diameter 1.1 x the roll diameter = 385 mm Maximum bending length 3,000 mm Nominal pre-bending performance over the entire bending length at 5 x D = 18 mm for sheet steel/ST40 Nominal bending performance over the entire bending length at 5 x D = 22 mm sheet steel/ST40 Drive power 22 kW Weight 13,500 kg. Three hydraulically driven rollers (one hydraulic motor per roller) - The rollers run in bronze plain bearings Hydraulic linear sub-roller adjustment Hard chrome-plated piston rods Hardened and ground rollers PILZ® Laser Validation BECKHOFF® CNC – Control with Ethernet technology and large touch screen DANFOSS® Precision Hydraul ...

Standing seam metal roof machine F3 Standing seam metal roof machine F3 with length measuring device was designed by our company to produce standing seam roofing panels for the installation of roofs and facades of various buildings and structures. Sheet metal blanks are passed through the forming rolls of the machine to get the desired shape of the standing seam panel. This method of production allows you to produce panels with a speed of about 10 meters per minute and fit any roofing companies. The machine is equipped with an easy width adjustment system, so it takes just a few minutes to readjust it from rolling one width to another. The F3 machine can work with panels from 200 to 700 mm wide. It is possible to work with metal sheets and coils made of galvanized steel, copper, zinc, aluminum, stainless steel, etc. Maximum metal thickness for work – 0.8 mm. Standing s ...