plate roll bending used for sale

Max. width: 3200 mm Nominal width: 3050 mm Max. thickness width: 40 mm Min. thickness width: 12 mm Max. material speed: 12 m/min Work rolls: -Units: 7 -Diameter: 340 mm Backup rolls: -Units: 5 -Diameter: 340 mm Supporting rolls: -Units: 15 -Diameter: 334 mm Diameter of feed and eccentric rolls: 380 mm Electrical motor: 132 kW Floor space: -Length: 3657 mm -Width: 5486 mm -Height: 3048 Total weight:105 tons

New OSTAS SMR-S 1270x190 mm sheet rolling mill The SMR-S models are one of the most popular metalworking solutions for light to medium duty applications; this is due to their robust body and the driving of the upper and lower rollers by electric motors. STANDARD EQUIPMENT and TECHNICAL SPECIFICATION • Precisely matched shafts made of high-grade steel SAE 1050 (CK-45) • Spiral reducer with chain and belt drive and wheels gears driving the upper and lower rollers • Machine body made of ST-52 steel • Rear roller motor • Manual top roll opening • Roller for conical bending • Top roller support system • Centralized lubrication system • Mobile electric control panel • Compliant with CE standards • User manual SPECIAL EQUIPMENT • Stepless speed regulation • Digital display for rear roller • Rear roller dr ...

Turkish made 3000 mm x 10 mm plate rolling machine 3 rolls Maximum bending thickness : 10 mm

hydraulic cylinder 2011 brand MG four mod rollers with control panel. MH-345 G 3100 mm long, 45 mm curved veneer and 35 mm thick pre-curved, steel with a yield strength of 260 N / mm2, equipped with hardened rollers, control panel with 2 displays, dimension attached to the machine and hydraulic curved device conical. Bending length: 3100 mm Bending capacity: 45mm Pre-bending capacity: 35mm Top roller diameter: 480mm Bottom roller diameter: 440mm Side roller diameter: 370 mm Power: 40 HP Approximate weight: 29,000 kg. Overall length: 6140 mm Width: 2695 mm Height: 2450 mm Working height: 1860 mm The maximum capacities refer to the ferrule diameter equal to or greater than 3 times the diameter of the top roll to yield materials in the range = 260 N / mm.

Machine is in good condition Top diameter: Central balls: 400 mm, side collects 300 mm, Pre-cylinder Alameda hair thickness: max. 8 mm, length: max. 5000 mm, diameter: p. 2000 mm

Hydraulic four-roller plate rolling machine type ASH 20/25 Roll thickness 30x2000 mm Year of production 2013 Technical condition: very good Upper roller fi 360 mm bottom roller fi 330 side rollers fi 250 mm

Calender 3 rolls MG 3 200 W like new. Purchased in 2009 and used for a limited number of orders, therefore very few hours of actual work (about 50). installed power Hp 440 Upper roller diameter 1.100 mm Side rollers diameter 960 mm Further technical data in the photos.

4 rolls, max rolling dimension 2,500 x 22 mm, allows cones to be made, practical for making buckets or anything related to public works.

Iron cylinder. Induction-hardened rollers. Easy handling thanks to mobile control panel with pushbuttons. Conical bending device. Hot-rolled steel rolls SAE 1050 (CK 45). Main motor with braking system. Precision bending with brake motor. Wire grooves at roll ends. Spheroidal cast-iron main frames. Upper and lower rollers driven by a single gearbox and gear system (RM). Steel rollers with SAE 1050 quality certificate and high tensile strength. Built to CE safety standards

3 roller rounding machine from the company Famar 3 x 2550mm rolls Ø 150mm year of construction 1996 traces of use available Equipment as far as known - rope safety switch - emergency stop - Digital display Data sheet and operating instructions unfortunately no longer available The object of purchase is sold under exclusion of any warranty. Exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of obligations of the seller and for any injury to life, limb and health. Price is net without VAT Collection only - Delivery by forwarding agency on request (costs of forwarding agency to be borne by buyer).

Manufacturer: MARCOVIL Model: MCH 4R 30-400 Type: 4 rollers Control: CRC Technical features Max sheet width: 3000 mm Bending capacity: 25 mm Pre-bending capacity: 20 mm Upper roller diameter: 400 mm Lower roller diameter: 360 mm Side rollers diameter: 360 mm Weight and dimensions Machine weight: 20.600 kgs Machine dimensions: 5500x2400x1850 mm Equipped with Side sheet metal escort supports Hoist crane with ferrule

3-shaft mechanically driven sheet rolling machine, manufactured by Sergi Italy, type S.I 401. The machine rolls 4 mm black sheet, 6 mm aluminum, to a length of 2050 mm, the diameter of the rollers: upper and remaining 130 mm. A machine with the function of bending sheet metal with side rollers up to 3 mm, and with the function of rolling cones - side roller. Beveling the side shaft on both sides, bending the lower and side shafts to create cones. Working speeds fast - slow up to 16 rpm. Weight 2480 kg. Power supply 4.5 kW.

3-shaft mechanically driven coiler for sheet metal. Roundo Sweden type PS 205. The machine rolls 5 mm black sheet, 8 mm aluminum, to a length of 2550 mm, the diameter of the rollers: upper and remaining 160 mm. A machine with the function of bending sheet metal with side rollers up to 4 mm, and with the function of rolling cones - side roller. Roller position readings. Beveling the side shaft on both sides, bending the lower and side shafts to create cones. Working speeds fast - slow up to 16 rpm. Weight 3580 kg. Power supply 5 kW.

4-shaft sheet metal rolling machine manufactured by Haeusler Switzerland type VRM-HY-L 4000x6. The machine rolls INOX 6 mm, black 8 mm, aluminum 14 mm sheet metal, on a length of 4100 mm, the diameter of the rollers: the upper one 350 mm, the others 250 mm. The machine with the function of bending sheet metal with side rollers up to 6 mm, and with the function of rolling cones. Beveling the side shaft on both sides, bending with the bottom and side shafts to make cones. Hydraulic retraction assist on the right side. Working rotation fast - slow up to 16 rpm. Weight 23000 kg. Power supply 15 kW.

DAVI Promau type MCA3020 4-shaft sheet metal rolling machine. The machine rolls black sheet metal 7 mm, aluminum 10 mm, on a length of 3100 mm, the diameter of the rollers: the upper one 200 mm, the others 180 mm. CNC controlled coiler. Machine with the function of bending sheet metal with side rollers up to 4 mm, and with the function of rolling cones. Beveling the side shaft on both sides, bending with the bottom and side shafts to make cones. Weight 4500 kg. Power supply 5.5 kW Full technical documentation.

Machine weight: 10000 kg Total machine input:: 11 kW Max. metal sheet thickness: 8/12 mm Min. inner diameter of the circular oven: 330 mm Upper cylinder diameter: 300 mm Bottom cylinder diameter: 300 mm Circle speed: 8000 mm/min

Type: XZMP 3150/16 Parameters: 3150 mm, 16 mm Manufacturer: Strojárne Piesok Year of production: 1984 Location: Czech Republic Description: Max. bending length 3150 mm Max. plate thickness 16 mm Min. inner diameter of rounded tube 550 mm Rolling speed 7 mm / min Roller adjustment speed 2x22 mm / min Machine dimensions LxWxH 7900x1930x2500 mm Machine weight 46800 kg

Make HAEUSLER Type VRM 1500 x 5 Year of construction 1964 Control conventional Sheet width 1500 mm Sheet thickness 5 mm Prebending 4 Upper roll diameter 185 mm Lower roll diameter 185 mm Side roll diameter 145 mm Dimensions of the machine L x W x H 4.0 x 1.23 x 1.6 m - Conical bending device - pneum. Folding stock

Description: SPECIFICATIONS Hydraulic 4-roll plate roller Character: Haeusler Type: VRM 3000/15 Roller length: 3,000 mm Plate thickness: 15 mm Number of rollers: 4 Upper roller diameter: ø350 mm Hydraulic folding Hydraulic lifting Conical rollers 2 Powered rollers Transport dimensions: 7,000 x 2,250 x 2,300 mm Machine weight: 21,000 kg Approx. Onsite Dimension. (l x w x h): 7,000 x 2,250 x 2,300 mm, weight approx.: 21,000 kg

Bendmak CYL ST 190-30/5 3 roll plate rolling machine Working length : 3250 mm Maximum thickness : 5 mm Machine is in good working condition

<b>Features:</b> Manufacturer: Bito Roll length: 830mm Diameter: 80mm Material: steel/galvanized Tailor-made logistics for your intralogistics We are your competent contact for roller conveyors, belt conveyors, schraegfoerderers or telescopes for loading and unloading your goods! We are happy to prepare your individual offer or advise you on the conception or assembly questions. Simply let us know your needs and the local conditions. Take advantage of our long-running experience and our excellent network of professionals. We have already successfully implemented projects for companies in a wide range of industries, such as logistics, the pharmaceutical industry, the craft sector and the electronics industry. Together, we will work out ways to optimize your flow and material flow cost-appropriately and sustainably. We can offer you even fully automatic sortin ...

<b>Features:</b> Manufacturer: Euroroll Roll length: 825mm Diameter: 80mm Material: steel/galvanized Tailor-made logistics for your intralogistics We are your competent contact for roller conveyors, belt conveyors, schraegfoerderers or telescopes for loading and unloading your goods! We are happy to prepare your individual offer or advise you on the conception or assembly questions. Simply let us know your needs and the local conditions. Take advantage of our long-running experience and our excellent network of professionals. We have already successfully implemented projects for companies in a wide range of industries, such as logistics, the pharmaceutical industry, the craft sector and the electronics industry. Together, we will work out ways to optimize your flow and material flow cost-appropriately and sustainably. We can offer you even fully automatic so ...

The scope of delivery includes: 01x idler, second choice Application: for roller conveyors Material color: sendzimir galvanized Material: Steel Type designation: MRT-50x1,5.20 Total length: 625 mm Web width: 595 mm Roll Ø: 50 mm Thread: smooth with spring pressure Weight / pcs.: approx. 1,370 kg Your contacts in our company: Mr. Andre Evering Mr.: Mario Klöver Lord: Falk German General information about the item: This item is offered for pickup only. A transport that is also desired or a shipment of this article is associated with additional costs, which separately depending on the place of delivery or scope of delivery.

The scope of delivery includes: 01x idler, second choice Application: for roller conveyors Material color: blue Material: Plastic Total length: 625 mm Web width: 595 mm Roll Ø: 50 mm Thread: smooth with spring pressure Weight / pcs.: approx. 0,640 kg Your contacts in our company: Mr. Andre Evering Mr.: Mario Klöver Lord: Falk German General information about the item: This item is offered for pickup only. A transport that is also desired or a shipment of this article is associated with additional costs, which separately depending on the place of delivery or scope of delivery.

Bending machine FAVRIN 3100×30 PHLS CNC (A3708) Type: hydraulic Max worklength: 3100 mm Eletric motor (power) 75 HP Courant needed 380V Weight 32 ton Machine was previously used to bend Hardox workpieces. bending capacities examples: – 3100 x 25 mm > multi stage bending for large radiuses – 2500 x 30 mm > multi stage bending for large radiuses – 3100 x 17 mm > single stage bending – 2500 x 25 mm > single stage bending full CNC corner + backgauge control upper hydraulic clamping of tools clamping force: 220 ton max bending angle: 110° max open: 500 mm Tooling included for radius bending Also 2 new extra cilinders included

This WEMO Punching-Bending-System was manufactured in the year 1992 in Germany. It is in good condition due conscientious and documented maintenance. The machine is still in operation and can be viewed and inspected at any time. It will be delivered including accessories from operators stock. Max. length of the parts is 2 meters and width is limited to approx. 1.10 meters. As for sheet thickness, everything between 0.5 and 1.25 mm can be processed. The Machine including roller conveyor at the end, has a length of approx. 31 meters and a width of around 16 meters (see drawing layout PDF attached below).

4 ROLL BRAND NEW MACHINE 2000X20MM -plate width 2000 mm -plate thickness 20 mm -prebend 14 mm -Top roll mm. 280 -lower roll mm. 260 -Power electric 380/50 Minimum rolling ID 330 mm Capacity 2000 X 20 mm Capacity 1000 x 25 mm -4 rolls hardened very high strength on surface -direct driven rolls rotation with axial planetary gear + hydraulic motor each roll. -conical bending hydraulic tilt angle for plate rolling conical reducers -rerolling system for welded plates to pass automatic welded seams thru -overload protection hydraulic safe operation. -console centralized with electric joysticks -rollers position bending and pre-bend digital readout CNC EVO graphic controller automatic fully programmable 4 axis plate rolling. Auto-calculate programs upon plate data input and test. .dxf files from cad station immediate drawing import and run bending program.  ...

Profile bending roll used equipment hydraulic model AR200 year 2008 make MG Italy Capacity bending chart photo in enclosed -Technical data: Output shafts size 200 mm -Machine complete with set of rollers adjustable for the various shape of profiles. -Traction tool hydraulic operated for the HEB-beam - IPE - UNP bending the hard side. -Lateral correctors left and right side hydraulic operated in 3 direction. -Included additional set of rolls for pipe 6" inches -Machine with 3 rolls driven system with individual hydraulic motor and axial gear-unit on each shaft. -The 3 shafts working on bearings, heavy duty type with sealed lubrication. -Centralized control panel movable on wheels with all electric commands. -Dual rolling speed up to 5 mtr/min with automatic balancing system between the 3 rolls. -Safety devices in compliance with European regulation. CE mark. - ...

profile bending roll model Femar PF22 year 1985 machine in working condition refurbished mechanical operated motorized electric pinch roll pyramid mechanical operated gear unit motorized electric rolls rotation position bending readout gauge adjustable rollers height to seat and bend the different shape of profiles Capacity ( see chart in enclosed ) angle 120 x13 mm flat bar on edge 120x30 mm flat iron 140x45 mm square iron bar 70 x70 mm T-section 100 mm C-section 160 mm IPE beam 160 mm dimension 2170 x1650 x H 1200 mm 8 ton

4 ROLL HYDRAULIC MODEL M2008 EVO_4.0 CNC GRAPHIC CAD-CAM Machine serial number 2022 PLATE BENDING ROLL PLANETARY DESIGN DOUBLE PINCH PRE-BENDING Capacity -Width of plate: 2000 mm -Thickness of plate rolling 8 mm -Thickness of plate pre-bending 6 mm -top roll 190 mm -lower roll 170 mm minimum rolling shell ID 220 mm -Power 5,5 Hp to run the hydraulic unit Voltage 400/50 – 480/60 -Weight of the machine 3400 Kg Configuration installed Surface hardening of the four rolls, smooth finishing suitable for stainless plates rolling Dual pre-pinch, with adjustable force upon the input of plate thickness Conical bending hydraulic attachment - hardened contrast pad. Power driven rolls rotation top/bottom gearbox axial direct drive hydraulic each roll. Calibration system f re-rolling of welded shells rounding. Console electric in ...

4-roll plate bending machine Mod. VRM NG HY 3000x40 Country of manufacture: Switzerland YOM: 1997 Brand: HAEUSLER AG Roll diameter 560/540/400 mm Roll thickness 40mm Roll length 3000mm Motor motor Power:55kW System: Hydraulic Voltage: 380V/3 phase Weight 45 000kg The quality of the machine is still very good.

THREE ROLL BLECHBIEGEMASCH. m. conical bending and in turn, used three rollers bending m/c with conical and prebending, used Typ / type: UBBDA 32 x 2000 Manufacturer / make: heavy machinery Wildau Baujahr/ new: 1984 Workspace, sheet width max. / maximum working length: 2000-.2100 mm maximum sheet thickness maximum sheet width rounding (cold) / Max sheet thickness at max.working length at bending(cold): 32 mm (270 MPa) On bending (cold) /. at prebending(cold): 23 mm Smallest sheet metal thickness maximum sheet width /. min. sheet thickness at maximum working length: 4 mm Bending rolls / bending rollers: top: 1 piece, bottom: 2 PCs Driven / driven: 2 bottom rollers / bottom rollers upper roll diameter / diameter of top roller: 382 mm Under Roll diameter / diame ...

RING BENDING MACHINE AKYAPAK TYPE AKBEND APK 30 - Asdiameter 30 mms - Draait on the right en linksom - Horizontaal/verticaal te gebruiken - Voetbediening - Noodstop - Documentatie - 400 V PRICE IS plus a VAT DUTCHMACH metal processing machines ENSCHEDE - the NETHERLANDS (1 km of the German border)

Tool cabinet for press brake Good for AMADA / PROMECAM or Type A L / W / H: 1050 mm x W 850 mm / H 1240mm, 310kg -extendable drawers, allowing access from both sides of the tools -any height adjustment of shelves -sturdy steel construction Fork-lateral guide rails for transporting by forklift (cavity under the cabinet) -The drawers run on Rollengleitschienen (serve as additional stabilization) , the cabinet can be broken - Number of drawers: 4 pieces - Dimensions of a drawer: - 1200mm Overall height / Overall width 850mm / 1050mm Overall depth - Dimensions of the compartments in a drawer: - Fachhhoehe set to 210mm (is varriabel) - Total compartment height 990mm shelves available ohnen - Usable shelf width 130mm - Usable shelf depth 980mm - Number of shelves: 3 piece

Tool cabinet for press brake Good for AMADA / PROMECAM or Type A L / W / H: 1050 mm x W 850 mm / H 1240mm, 310kg -extendable drawers, allowing access from both sides of the tools -any height adjustment of shelves -sturdy steel construction Fork-lateral guide rails for transporting by forklift (cavity under the cabinet) -The drawers run on Rollengleitschienen (serve as additional stabilization) , the cabinet can be broken - Number of drawers: 4 pieces - Dimensions of a drawer: - 1200mm Overall height / Overall width 850mm / 1050mm Overall depth - Dimensions of the compartments in a drawer: - Fachhhoehe set to 210mm (is varriabel) - Total compartment height 990mm shelves available ohnen - Usable shelf width 130mm - Usable shelf depth 980mm - Number of shelves: 3 piece

hydraulic concrete steel Benders Krupp Futura B 703 steel bending machine with accessories and complete instructions Tech. Data performance table - steel 50-55 kp/mm2 Diameter 22 mm - 6 bars per bending, 28 mm-4, 32 mm 3,. Mtfgtw 50 mm 2 speed 4-12 / min Operation - with control or manual, operating dial - HAND - machine with possibility of 3 bending angle set - every page - 3 links + 3 right complete documentation, operating instructions much accessories more info upon request You can edit, flat, round steel accessories - various bending rollers, bolts, reducing roll, Overarm and the machine has device for Pipes. Bulk 2.3 x 1 x 1 m, Btto 1500 kg

Max pipe Ø: 60,3 x 3.2 mm maximum bending angle: 180 ° PIN length: 3000 mm Electr. Supply: 380 V, 8.6 kW space: 2400 x 5700 x 1500 mm weight: approx. 2500 kg

Hydraulic press brake, used Hydraulical press brake, used type / model: D 160-25 Make / make: GWF Year / year of make: 1993 Pressure / force: 160 t Bending length / working length: 3,050 mm Stand width approx. / distance b/n standards: 2.550 mm Table width: 220 mm Stand RADIUS / depth of Cap: 280 mm height / shut height: 440 mm working stroke ca / stroke. Max 250 mm Hubgeschw. / speed of stroke: down: down; 90 mm / s Press down 11 mm / s Expensed. / upward: 90 mm / s Machine weight / weight: approx. 13 t Power consumption / connected load: 22 kW Spec/specif.: 2-hand/foot control / 2 foot switch - manual

The CNC press brake SMD PBH 110-3100-4C produced in 2006 is offered in a set with the ANTIL TWISTER F5 robot. Technical parameters : - manufacturer: SMD - type: PBH 110-3100-4C - year of production: 2006 - control: CNC CYBELEC ModEva 10 - overworked time: about 20,000 man-hours - pressure force: 110 tons - bending width: 3100 mm - maximum working speed: 10 mm / s - table width: 60 mm - table height: 960 mm - stroke: 465 mm - frame spacing: 2600 mm - throat: 410 mm - power supply: electric - 11.5 KW, 400 V three phases - oil tank capacity: 250 l - dimensions of the press: 3960 × 2045 × 3650 mm - total weight: 9500 kg Processing on a 3 m table and palletizing of finished details on 3 europallets.

For sale we offer a bending machine. It is a Demonstration machine used for prototypes in our production department. Therefore, a few operating hours of approx. 154.1 Bh technical data: Bending force: 40T Bending length: 1600mm Distance between columns: 1200mm Stroke (Y-axis): 150mm Open height: 390mm Table width: 120mm Working speed: 15mm/s Fast speed: 150mm/s Return speed (up): 100mm/s Control axis (8 + 1 axis): Z1,Z2, Z1, Z2, R1, R2+V Power: 5.5 kW Control - Delem-DA-66T (Multilingual) Operating Instructions: English Number of strokes: 10645 Price net: 35.000â?¬ Visit possible by prior arrangement. If you are interested, please contact us.

AKYAPAK ROUND BENDING MACHINE TYPE 90-10/3.0 MMIJ AS -Capaciteit 1050 x 3 mm -Electrically adjustable achterrol -Digital uitlezing -Roll Harde -Walsen Conisch -Bovenrol Wegdraaibare -Remmotor -Voetbediening -Noodstop -Documentatie -400V PRICE is plus VAT DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (1 km from the German border)

Press brake AMADA HFE 220-3 Number of controlled axes / CNC controlled axis: 7 Condition good, ready to use, visit under electricity possible / Condition: good, in use, can be seen under power in Poland Pressure / Pressure: 2200 kN / 220 ton Bending length / working range: 3100 mm Distance between stands / distance between columns: 2700 mm Stroke / stroke: 200 mm Delivery speed / downwards speed: 1-100 mm/s Working speed / working speed: 1-10 mm/s Retraction speed / backwards speed: 1-100 mm/s Dimensions Machine / Machine's dimensions: 4.3 x 2.3 x 3.1 m Weight / Weight: 14 ton Machine has: new safety cards from Pilz, new tool clips, new keyboard of control, new stop finger Machine has: new safety cards by Pilz, new tool clamps, new CNC cover, new back gauge fingers

SAY MAK ROUND BENDING MACHINE TYPE SR 1050 x 75 -Capaciteit 1050 x 2 mm -Walsen Conisch -Bovenrol Wegdraaibare -Documentatie PRICE is plus VAT DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (1 km from the German border)

SAY MAK ROUND BENDING MACHINE TYPE SIR 1050 x 46 -Capaciteit 1050 x 0.8 mm -Walsen Conisch -Bovenrol Wegdraaibare -Remmotor -Voetbediening -Noodstop -400V PRICE is plus VAT DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (1 km from the German border)

SAY MAK ROUND BENDING MACHINE TYPE MSM 1080 x 100 -Capaciteit 1080 x 3.5 mm -Walsen Conisch -Bovenrol Wegdraaibare -Remmotor -Voetbediening -Noodstop -Weight 600 kg -400V PRICE is plus VAT DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (1 km from the German border)

SAY MAK ROUND BENDING MACHINE TYPE MSM 2080 x 100 -Walsen Conisch -Bovenrol Wegdraaibare -Remmotor -Voetbediening -Noodstop -Weight 850 kg -400V PRICE is plus VAT DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (1 km from the German border)

SAY MAK ROUND BENDING MACHINE TYPE SIR 1050 x 75 -Capaciteit 1050 x 2 mm -Walsen Conisch -Bovenrol Wegdraaibare -Remmotor -Voetbediening -Noodstop -400V PRICE is plus VAT DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (1 km from the German border)

SAY MAK ROUND BENDING MACHINE TYPE SHYAM 2050 X 140 -Capaciteit 2050 x 4 mm -Electrically adjustable achterrol -Digital uitlezing -Roll Harde -Walsen Conisch -Bovenrol Wegdraaibare -Remmotor -Voetbediening -Noodstop -Documentatie -400V PRICE is plus VAT DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)