plate processor ctp used for sale

length: 9000 mm width: 6000 mm number: 1 Thickness: 410 mm T-slot - width: 50/80 mm number of T-slots: 10 T - slots distance: 300 mm plate size: 9000x3000 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

feeder: • pallet feeder • machine number (feeder) 34103/88 • counter EVZ 30 1st folding unit: • pre-slitter shafts • 4 buckle plates • rear-mounted slitter shafts • noise prevention 2nd folding unit: • working width max. 94cm • 4 buckle plates • rear-mounted slitter shafts • noise prevention 3rd folding unit • working width max. 66cm • 2 buckle plates • rear-mounted slitter shafts • noise prevention Still in operation: No Available: sofort

M. No.: 4028/20 Equipment / Additional information: G2.090.9041/03

in our stock HEIDELBERG OHT | Original Heidelberger Platen - Serial: 102265 - Year 1955 - Paper size: 26 x 38 cm Good working condition We gladly make you an offer. Please send us an email for this purpose.

Technical data: maximum sheet width: 3000 mm maximum plate thickness at maximum yield of 240 N / mm² on bending: 35 mm On bending length: 2,2 x S Diameter of roller upper roller: 552 mm Bottom roll: 532,4 mm Side rolls: 400 mm

Plate filter with pump Manufacturer: Rover Pompe Type: Colombo Field of use: Olive oil Filter plates: 25 PCs. End plates: Stainless steel Sheet size: 20 cm x 20 cm Pump: Capacity: 28 l / min Conveying height: 22 m Water temp. Max: 35 ° C In very good condition! Plate filter incl. new replacement filter plates and replacement filters!

Working width: 1020 mm, sheet thickness: 1 mm top rollers diameter: 55 mm bottom rollers diameter: 55 mm space requirement: 1370 x 570 x 1100 mm

Working width: 3050 mm sheet thickness: 6 mm throat depth: 200 mm rear gauge: 1000 mm power: 15 kW space: 4100 x 2300 x 2100 mm weight: 8500 kg well-preserved CNC hydraulic shear, with pivoting Panel, serial control. CYBELEC, CNC 1000, Hours of operation according to the operating hour counter: 2700 h

Roasters, Grill, griddle with smooth surface by ELRO, new griddle/Grill, still not used, completely made of stainless steel, adjustable up to 250 ° C, base construction, without feet (can subsequently be built), voltage: 380V, outer dimensions: 510x800x760mm

; ready for use

Plate bender Heidelberg, fit\'s from size 52 up to 105, max. plate lenght 811 mm; Ready for operation

Magnetic clamping plate Size: 450 x 150 mm new

Plate length: 5500 mm Plate width: 1500 mm Plate thickness: 300 mm Number of T-slots: 11   Size T-slots: 22 mm Type of material: Cast Iron   MACH-id    5224 MAKE        STOLLE Germany TYPE          YOP             2016 SPECIFICATIONS Length        5500 mm Width         1500 mm Height          300 mm No. Of T-slots       11 Distance from T to T-slot / Jump      100 mm T -slot size      T 22 Weight a plate approx.      6000 Ton

Plate length: 3000 mm Plate width: 1500 mm Plate thickness: 400 mm Number of T-slots: 5   Size T-slots: 32 mm Type of material: Cast Iron   MAKE   Asquith UK TYPE    CAST IRON YEAR    80 er SPECIFICATIONS Length    3000 mm Width      1500 mm Height     400 mm T -slot size   T 32  No. Of T-slots   5 x Distance from T to T-slot / Jump   305 mm Weight a plate approx.4000 Ton Number off matching pieces   2 DIMENSIONS Length   3000 mm Width    1500 mm Height    400 mm

Plate length: 4000 mm Plate width: 2100 mm Plate thickness: 400 mm Number of T-slots: 7   Size T-slots: 36 mm Type of material: Cast Iron   MACH-id    3628 MAKE        SKODA YEAR         2005 SPECIFICATIONS Length      4000 mm Width       2100 mm Height        400 mm T -slot size      T 36 No. Of T-slots   7 Distance from T to T-slot / Jump   300 mm Weight a plate approx.   7560 Ton Number off matching pieces    12 We have many clamping plates for sale, all our t slotted plates we have on stock.  

Plate press - table press - Laboratory Press - Universal Press MHSP522 Press area 230 230 mm Clear width 200 mm Manual drive with worm gear screw jacks 5 KN Pressure 5 KN (0.5 tons) Weight 55 kg Per sensor revolution 0.5 mm path, this little manual force with great force, very fine deliverable. Pressing force is long maintained by self-locking.

Included in delivery are: 01x closure lid, II choice Material color: green Material: Metal Dimensions: approx. 520x320x35 mm (LxWxH) Net weight: approx. 2,481kg Technical data for the closure lid: Manufacturer: SSI Schäfer Type designation: VD-14/6-A 4 closure tabs suitable for: SSI Schäfer 14/6-A General information about the article: This item is offered for pickup only. A desired transport beyond that or a dispatch of this article is associated with additional costs, which separately depending on the place of delivery or scope of delivery can be queried from us. Our services at a glance: (Prices on request) Assembly, assembly our general assembly conditions must be observed Shelf inspection Shelf inspection according to DIN EN 15635 carried out according to the Requirements of BGR 234 Visual inspection for all shelving systems Delivery with our own  ...

Qty. 1 Second-hand plate milling line - never used Mfc.: SELEMA Type: PMM Built: 2014 Max. scalping area: 1800 x 4000 mm Height: 6 – 200 mm Entry plates planatory tolerance: max. 0.4 on width max. 0.2 on length Entry plates thickness tolerance: +/-0.2 mm Thickness accuracy: +/- 0.1 mm Min./max. milling depth (single milling: 0.1 / 1.5 mm Positioning accuracy: +/- 0.0125 mm Moveable table stroke: 10 mm Movable table speed: 2.5 m/min. Mill dia.: 2.1 mm Mill speed: 490 RPM Milling surface roughness: < 0.25 Ra with cut-off = 1.5 mm & new milling tools

16 plates for filler Handtmann VF 80 , VF 200 , VF 300P - new cataog number 834403 Ask for an offer iNTER-WiBA Sp.J. UL. Krakowska 263 PL 43-305 Bielsko-BiaÅ?a USt-IdNr.: PL547-17-47-669 Tel. 0048/33 812 58 60 fax. 0048/33 812 58 36

Hand lever plate and profile steel shears heavy and stable outing cuts sheets, round steel (approx. 15mm), flat steel and T-profiles Mounted on base Special price

Knee lever shears for sheet metal Cutting length 15 cm maximum sheet thickness 3 mm Built in 1982 L x W x H: 50 x 40 x 150 cm Weight approx. 50 kg The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/Ersatzteile durch MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Maschinenbau Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

warehouse no.: 501525 manufacturer: BATTENFELD Typ: Druckplatte 4505715 year of construction: 2012 We offer a mould plate / pressure plate for injection moulding machine from BATTENFELD for model HM II 4500, number 4505715. Pressure plate for injection molding machine Battenfeld HM series II 4500, Art. Nr.: 4505715th printing plates include injection molding machines to the highly stressed machine parts. The pressure plate is offered immediately from stock in Langenfeld (Rheinland), available

Plate suspension set to R & B Chamber filter press

Manufacturer / Origin: Bacher / Germany (EU)

Siemens Spare Parts

2 pcs HALDER interchangeable plates V70, 500 / 400 mm, groove distance 70 mm

Gastro Griddle plate with cabinet Gastro grill plate Griddleplate Cabinet with 4 countertop with 4cm edge Mass: HxBxT= 87x170x97cm Formore items can be found in our shop.

cast-ribbed clamping plate with T-swallowtail grooves, approx. 5400 x 2200 mm, water gutters on the face, weight approx. 8 t

Pressing plate of BRUDERER BSTA 41 type W x D x H = 660 x 550 x 95 mm Hole = 500 x 100 mm

Plate shear of Walter 6 / 30 Year of construction: 1991 up to 6 mm Now available

Clamping plate Dimension 900 x 630 x 120 mm Nute 28 mm Angle of the grooves 30°

Three T-slot plates of a copy-fraes machine from Lid are offered. The T-slot plates can be mounted as a cross table. Scope of delivery only according to photos, without spindles. If you are interested, please request more photos. Further spare parts of lide e.g. towing table of a KF3 pre-wheels. Please ask. Special price Lid cabinet tool cabinet

Printing plate punch Beil 425 stand model; good condition; Punching 425mm round; with adjustable ring visor bolts; Foot pedal; Max. Plate width 97cm.; Ready. At this point we allow ourselves to note that all offered machines are in our unrestricted possession or access and are present in our warehouse. Visits and demonstrations are possible on request in our premises. We would also be pleased to inform you about our complete stock, as only part of our portfolio is presented here.

XL wide printing plate punch ( 165 cm ) for Roland and KBA presses. 4 punching modules are installed, 425 mm and 780 mm. Additional recesses and fastenings are provided for a total of 120 cm, so that a larger format can be processed; Very good, ready to use. At this point we allow ourselves to note that all offered machines are in our unrestricted possession or access and are present in our warehouse. Visits and demonstrations are possible on request in our premises. We would also be pleased to inform you about our complete stock, as only part of our portfolio is presented here.

6x NUMMERATORS CROSS PLATE, FORWARD, SMALL No. of the Wheels: 7 Fig.Size: 3/16 Prefix Arm: RA

Magnetic plates for letterpress; 3x A4 available (format 306x217x22mm); 3x A5 available (format 217x153x22mm); 6x A6 available (format 153x108x22mm).; Ready. At this point we allow ourselves to note that all offered machines are in our unrestricted possession or access and are present in our warehouse. Visits and demonstrations are possible on request in our premises. We would also be pleased to inform you about our complete stock, as only part of our portfolio is presented here.

No. of the Wheels: 7 Fig.Size: 3/16 Prefix Arm: RA

Size max 360 x 650 mm min 80 x 100 mm Speed max 150 m/min Equipment o flat pile feeder 1st folding unit: o 4 buckle plates o Festa foldingrolleradjustment o noise prevention ; working condition

Size max 1.120 x 1.450 mm min 250 x 250 mm Speed max 10-16 m/min Equipment: feeder o pallet feeder (MBO) o MC control 1st folding unit: o 4 buckle plates o rear-mounted slitter shafts o noise prevention 2nd folding unit: o 4 buckle plates o rear-mounted slitter shafts o noise prevention 3rd folding unit: o 2 buckle plates o rear-mounted slitter shafts o noise prevention delivery: o belt delivery ; working condition

Thawing transformer make TREKOLUX type EAGYear of construction 2000for thawing frozen water pipesMax. Power: 10AThawing i. Volts - 3 levels: 2.5 / 5 / 10VThawing performance 2,5 V: 400 AMinimum pipe length for 2 pipe: 4 mThawing performance 5V: 400AMinimum pipe length for 2 pipe: 8 mThawing power 10 V: 200 AMinimum pipe length with 1 pipe: 15 mExternal dimensions L x W x H: 350 x 250 x 250 mmWith- 5 m ground cable- 20 m ground cableused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

- Engraving pitch bottom plate: approx. 5 x 5 mm - Engraving depth bottom plate: approx. 1.45 mm - Sheet thickness: approx. 1.5 mm - Top/bottom plate connection shaft: approx. 16 mm - Collar radius: 96.5 mm

Hydraulic four-roll plate bending machine Fabr. Haeusler type VRM HY 2000-6Machine number: 1186-1968, built in 1968Max. Working width approx. 2040 mmMax. Druchgang approx: 2100 mmMax. Sheet thickness with bend: 6 mmUpper and lower roller diameter each approx: 250 mmSide roller diameter approx.: 200 mmStroke of rollers approx. Each: 220 mm2 working speedsTotal drive power approx: 18 KWWorking height approx: 1300 mmSpace required: L 5450 x D 1900 x H1930 mmWeight approx: 10500 kgWith:- Both side rollers with mot. delivery for bending + conical bending- hydr. Folding bearing for removing the sheet metal- Slip clutch- Right-left purchase- separate control panelused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are ...

Face plate ring bending machine make IRLE type B 70Machine -No: 633 built in 1962in mechanical designTechnical specifications:smallest ring inner diameter: 120 mmlargest ring diameter: 650/1150/1650 mmBending capacity for flat flange: 70 x 30/60 x 60 x 1 50 x 12/40 x 40 x 6 mmmax.external profile dimensions: 60 x 60 mm3 faceplate speeds through gear shifting: 4, 6 and 9 rpm.Drive power: 4.0 HPWeight approx: 1200 kgusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Qty. 1 Second-hand roughing, finishing mills and special equipment Mfc.: DAVY, TMEIC, TOSHIBA, MITSUBISHI Type: 4-Hi Rev. Built: 1997 Revamped & Installed: 2008, 2011 Stopped in 7-2017 Revamped cost of USD 151.0 Mill. from 2008 up to 2011 Finishing mill equipped with CVC Roll plus Technology System Finishing mill – new hydraulic adjustment to increase rolling force to 90 MN Roughing & Finishing mills: Technology Control System (Level 1) Process Models (Level 2) for pass schedule calculation, profile & flatness control (PFC), Pacing system & Material tracking Revamped by SMS in 2011: Roughing mill: Slipper-type Spindles Product capacity: 2,000,000 ton/year Mill capacity: 30 Plates/h Entry Material: Slab T130~300 mm x W1,200~2,200 mm x L2,350~4,000 mm Final Product: Plate T5~180 mm x W1,200~4,100 mm x L max. 25 m Application: Ship building plate & Pipe pro ...

KF Pasteuristationsanlagen Capacity 6600 liters per hour Control technology of the revised 2007 -Full documentation -Fully serviced

M. No.: 1727/25

all stainless steel belt width 640 mm natural gas 16 kW 414 kW heat capacity 3 x 400 V gas pressure 30 mbar