plate processor ctp used for sale

Specifications: - Clamping surface approx. L 900 x D 600 mm - Table height 480 mm - Circulating water channel - 3 pieces T – grooves M 16 L 900 mm - side flange plate - Space requirement L 1000 x D 760 x H 480 mm - Weight approx. 300 kg

Pipe sealing cushions, leak sealing cushions, sealing plates, pipe seals, breakthrough seals -Pipe sealing cushions -Outer/inner diameter: 122/62 mm -Height: 20 mm -Hole circle: Ø 100/7 mm -Delivery of: steel/stainless steel cover plates possible -Number: 11x pillows available -Price: per piece -Minimum order: 3 pieces -Weight: 0.2 kg/piece

Printing plate punch hatchet; good condition; Max. Plate width 205cm; Perforation 1200/780/425mm Autoplate; 1200 and 425mm can be parked. Plate punch hatchet; good condition; max.plate width 205cm; punch 1200/780/425mm autoplate; 1200 and 425mm can be suppressible.

Clamping plate, scribing spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate -Length: 795 mm -Width: 600 mm -Height: 145 mm -Plate thickness: 30 mm -with: support ribs -Weight: 148 kg

Clamping plate, welding table, welding table, straightening plate -Diameter: 1240 mm -Height: 975 mm -Plate thickness: 18 mm -Groove scale: 18 different diameters -Weight: 478 kg

Clamping plate with T-slots and cross table, plate field, welding table, welding table, plate boring machine, T-slot plate, pallet changer -Width: 390 mm -Length: 1185 mm -Height: 42 mm -Groove width: 18 mm -Holes: see photos -Weight: 145 kg

Spine heating plate Schmedt PräPara; good condition; cleaned and tested; Max. Book height 640mm; Max. Block thickness 110mm; Adjustable inclination. Book cover heating plate Schmedt PräPara; good condition; cleaned and chekced; max.book hight 640mm; max.block thikness 110mm; adjustable in tilt.

Very high-quality CNC – controlled precision sheet metal bending machine with automatic bending sequence calculation – automatic, CNC – controlled double-sided pre-bending – conical bending device Roll diameter 350 mm Smallest weft diameter 1.1 x the roll diameter = 385 mm Maximum bending length 3,000 mm Nominal pre-bending performance over the entire bending length at 5 x D = 18 mm for sheet steel/ST40 Nominal bending performance over the entire bending length at 5 x D = 22 mm sheet steel/ST40 Drive power 22 kW Weight 13,500 kg. Three hydraulically driven rollers (one hydraulic motor per roller) - The rollers run in bronze plain bearings Hydraulic linear sub-roller adjustment Hard chrome-plated piston rods Hardened and ground rollers PILZ® Laser Validation BECKHOFF® CNC – Control with Ethernet technology and large touch screen DANFOSS® Precision Hydraul ...

Pipe sealing cushions, leak sealing cushions, sealing plate, pipe sealing, breakthrough sealing -Pipe sealing cushions -Outer diameter: 248 mm -Height: 20 mm -Hole circle: Ø 200/7 mm -Delivery of: steel/stainless steel cover plates possible -Number: 10x pillows available -Price: per piece -Weight: 1.1 kg/piece

Printing plate transport system Grafoteam MDT 36 TW; will be overhauled before delivery; right or left display; Max. Plate size 880x660mm; Color sensor. Printing plate conveying system Grafoteam MDT 36 TW; will be rebuilt before shipping; delivery to right or left side; max.plate size 880x660mm; color sensor.

Very high-quality CNC – controlled precision sheet metal bending machine with automatic bending sequence calculation – automatic, CNC – controlled double-sided pre-bending – conical bending device Roll diameter 350 mm Smallest weft diameter 1.1 x the roll diameter = 385 mm Maximum bending length 3,000 mm Nominal pre-bending performance over the entire bending length at 5 x D = 18 mm for sheet steel/ST40 Nominal bending performance over the entire bending length at 5 x D = 22 mm sheet steel/ST40 Drive power 22 kW Weight 13,500 kg. Three hydraulically driven rollers (one hydraulic motor per roller) - The rollers run in bronze plain bearings Hydraulic linear sub-roller adjustment Hard chrome-plated piston rods Hardened and ground rollers PILZ® Laser Validation BECKHOFF® CNC – Control with Ethernet technology and large touch screen DANFOSS® Precision Hydraul ...

- Capacity : 2 x 4000 l/h - Inlet temperature : + 40°C - Outlet temperature: + 20°C - Cooling liquid temperature: approx. 7°C - 2 plate compartments for cooling 2 products simultaneously and individually - With control for 2 independent circuits

Printing plate die-cutter for Roland 300 presses with CPL system. Tested, all punching modules without defect. Stock goods, can be shipped immediately.

Plate max width 650 mm Plate min length 460 mm Weight 150 kg Current 220V 7.5 Amp, 1.5 kW Working Dims W107 x D180 x H106cm Packaging Dims W107 x D100 x H106cm

Control cabinet, distribution cabinet, control cabinet, TS modular cabinet, mounting plate -Partial mounting plate: 500 x 700 mm -with: fastening material -Dimensions: 700/500/H20 mm -Weight: 8.6 kg

From original template directly onto plate. fully automatic! The original is exposed via lens system onto a printing-plate roll. Plate is automatically cut and developed - ready for direct use on Rotaprint.

cleaned & checked 220 Volt / 1500 Watt / 50-60 cycles (Hz)

M. No.: 3839/11

Clamping plate, welding table, welding table, straightening plate -Mounting plate is: steel -Width: 650 mm -Length: 650 mm -Height: 845 mm -Plate thickness: 40 mm -Plate is: on steel frame -Transport dimensions: 650/650/H845 mm -Weight: 203 kg

Clamping plate, welding table, welding table, straightening plate -Surface: milled -Cast table -Length: 1995 mm -Width: 1995 mm -Height: 320 mm -Plate thickness: 42 mm -Transport dimensions: 1995/1995/H320 mm -Weight: 1647 kg

Pipe sealing cushions, leak sealing cushions, sealing plate, pipe sealing, breakthrough sealing -Pipe sealing cushions -Outer/inner diameter: 84/31 mm -Height: 20 mm -Hole circle: Ø 59/7 mm -Delivery of: steel/stainless steel cover plates possible -Number: 109x pillows available -Price: per piece -Weight: 0.1 kg/piece

Offer 08533 Measurement.- Richt. and welding plate Specifications: - Length approx. 2000 mm - Width approx. 1500 mm - Material thickness of the upper plate approx. 40 mm - Total height of the ribbed plate approx. 180 mm - Total height plate with steel base approx. 850 mm - Weight approx. 1800 kg

Rubber mat, rubber plate, stop rubber, stop plate, rubber cover, rubber pad -Gum plate: from pre-tensioning technology -Thickness: 48 mm -Width: 150 mm -Length: 200 mm -Number: 12 pieces -Price: per piece -Weight: 4.3 kg/piece

Clamping plate, measuring plate, measuring table, optical measuring device, altimeter, measuring table -Measuring table: with optical measuring device and altimeter -Width: 695 mm -Length: 1800 mm -Height: 1775 mm -Weight: 444 kg

Granite measuring plate vibration insulated Measuring plate made of grey-black granite as a basis for assembly, control and laboratory purposes Outer edges visible ground Stainless threaded and fitting holes Base with vibration insulation (diaphragm air spring insulators) Plate size 2000 x 1450 x 400 mm (WxDxH) Weight approx. 4000 kg

Mounting plate, measuring plate, measuring table, leveling plate, floating plate, transport plate, sliding plate -Manufacturer: Peiseler, Floating plate -Plate: 520/400/H40 mm -Box dimensions: 610/745/H205 mm -Weight: 71 kg

Clamping plate, scribing spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate -Clamping plate: length 5020 mm -Plate thickness: 37 mm -Dimensions: 5020/500 / H255 mm -Weight: 1550 kg

length: 1800 mm width: 430 mm work height max.: 700 mm total power requirement: kW weight of the machine ca.: 300 Kg dimensions of the machine ca.: 1,9 x 0,5 x 0,7 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pipe sealing bag, leak-tight cushion, sealing plate, pipe seal -Rohrdichtkissen -Outside / inside Ø 195/155 mm -Height 53 mm -Delivery of steel / stainless steel cover plates possible -15 x pillows available -Price per piece -Weight 0,5 kg / piece

Pressure plate stacker Grafoteam PST 26; good condition; cleaned and tested; new engine; .max. Panel size 820x780mm, min.324x394mm. Plate stacker Grafoteam PST 26; good condition; cleaned and checked; New Arm Motor; Max.plate size 820x780mm, min.324x394mm.

Double disc grinding machine

High-speed high-temperature system with adjustable heat holder The machine can be started in a closed system or via supply tanks with pump control. Control via Siemens S7

Pressure plate stacker Grafoteam PST 26 C 580; condition outdated; .max. Panel size 580x820mm, min.240x240mm; Speed adjustable; Height adjustable. Plate stacker Grafoteam PST 26 C 580; codition rebuilt; max.plate size 580x820mm, min.240x240mm; adjustable in speed; adjustable in hight.

Length: 5000 mm Width: 2000 mm Height: 400 mm

Clamping plate with T-slots and cross table, plate field, welding table, welding table, plate boring machine, T-slot plate, pallet changer -T-slot plate -Width: 300 mm -Length: 420 mm -Height: 70 mm -Groove width: 14 mm -Weight: 52 kg

Pipe sealing cushions, leak sealing cushions, sealing plate, pipe sealing, breakthrough sealing -Pipe sealing cushions -Outer/inner diameter: 495/403 mm -Height: 20 mm -Hole circle: Ø 445/14 mm -Delivery of: steel/stainless steel cover plates possible -Number: 8x pillows available -Price: per piece -Weight: 1.5 kg/piece

Control cabinet, distribution cabinet, control cabinet, TS modular cabinet -Mounting plate for: control cabinet -Dimensions: 1895/500/22 mm -Weight: 28 kg

Clamping plate, welding table, welding table, straightening plate -Length: 2285 mm -Width: 1250 mm -Height: 780 mm -Sheet thickness: 75 mm -Weight: 1737 kg

Plate intermediate table MDT 480 C-800; condition outdated; new engines; new tapes; .max. Printing plate size 811x1200mm; Inlet and outlet sensor; height adjustable. Plate conveyor Grafoteam MDT 480 C-800; condition rebuilt; new motor; new belts; max.plate size 811x1200mm; in and outfeed sensor; adjustable in hight.

Roller bench Material thickness 1 mm Usable length 1,275 m Weight 200 kg

Pipe sealing cushions, leak sealing cushions, sealing plate, pipe sealing, breakthrough sealing -Pipe sealing cushions -Outer diameter: 410 mm -Height: 21 mm -Delivery of: steel/stainless steel cover plates possible -Number: 32x pillows available -Price: per piece -Weight: 2.8 kg/piece

Pipe sealing cushion, leak sealing cushion, sealing plate, pipe sealing, penetration sealing -Pipe sealing cushions -Outer/Inner: Ø 233/194 mm -Height 53 mm -Delivery: steel / stainless steel cover plates possible -Number: 23 pillows available -Price: per piece -Weight: 0.6 kg/piece

Pipe sealing cushions, leak sealing cushions, sealing plates, pipe seals, breakthrough seals -Pipe sealing cushions -Outer/inner diameter: 103/13 mm -Height: 20 mm -Hole circle: Ø 76/7 mm -Delivery of: steel/stainless steel cover plates possible -Number: 5x pillows available -Price: per piece -Minimum purchase: complete -Weight: 0.1 kg/piece

Disc grinding machine Grinding machine for plates, bowls, rings, wheels, etc. Manufacturer: Hempel Model No.: PQ-4 Year of construction: 1982

Pipe sealing cushions, leak sealing cushions, sealing plate, pipe sealing, breakthrough sealing -Pipe sealing cushions -Outer/inner diameter: 200/111 mm -Height: 18 mm -Hole circle: Ø 152/8 mm -Delivery of: steel/stainless steel cover plates possible -Number: 13x pillows available -Price: per piece -Weight: 0.4 kg/piece

Pipe sealing cushions, leak sealing cushions, sealing plate, pipe sealing, breakthrough sealing -Pipe sealing cushions -Outer/inner diameter: 390/320 mm -Height: 20 mm -Hole circle: Ø 352/11 mm -Delivery of: steel/stainless steel cover plates possible -Number: 30x pillows available -Price: per piece -Weight: 1 kg/piece

Calamit Magnet Weight: approx. 65 kg Dimensions : 300 x 200 x 165 mm Shipping is of course possible. Shipping is subject to freight and packaging costs, depending on size and weight. (Subject to changes and errors regarding technical data and prices!) In accordance with our terms and conditions, we would like to point out once again that cheques and bills of exchange cannot be accepted.

length: 31000 mm width: 2500 mm number: 1 plate dimensions -w x h: 7000x2500 mm number: 4 plate dimensions -w x h: 6000x2500 mm T - slots - width: 28 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control cabinet and distribution board, busbars, busbar supports, busbar adapters, terminal plates -Wöhner item no.: 01 243 -Quantity: 2 pieces available -Price: per piece -Minimum purchase: complete -Dimensions: 200/80/H110 mm -Weight: 0.5 kg/piece

Vacuum lifter, vacuum lifting device, vacuum suction device, plate lifting device, vacuum lifting frame, suction plate, suction device -Manufacturer: Pannkoke, vacuum cleaner No. 388 -Diameter: 290 mm -Number: 1 piece -Dimension: Ø 290 x 50 mm -Weight: 1.6 kg