plate line used for sale

Control: iTNC 530 Max.travel range: X 450 mm Y 650 mm Z 460 mm A -10 / + 110? C nx 360? Spindle speed ? 28000 rpm Taper ? HSK 63 Tool changer ? 60 positon machine has spindle cooling, Erowa clamping system is available, measuring probe for par

Control: iTNC 530 Max.travel range: X 450 mm Y 650 mm Z 460 mm A -10 / + 110? C nx 360? Spindle speed ? 28000 rpm Taper ? HSK 63 Tool changer ? 120 positon machine has spindle cooling, Erowa clamping system is available, measuring probe for pa

with pallet changer for 20 pallets. Control: iTNC 530 Max.travel range: X 885 mm Y 600 mm Z 600 mm A -10 / + 110? C nx 360? Spindle speed ? 28000 rpm Taper ? HSK 63 Tool changer ? 120 positon Exchange of pallets: 20 pallets Coolant tank: 1000l machine ha

FULL POWDER FILLING AND PACKAGING LINE COMPLETE WITH ALL CONVEYORING, GENERATORS AND 4 PALLETS WORTH OF SPARES. USED FOR POWDERED SUGAR AND FLOUR CONSISTING OF: CARTON ERECTING MACHINE TO POWDER FILLING MACHINE TO CHECK WEIGHER TO CARTON SEAL MACHINE TO LID APPLICATION MACHINE PLEASE CONTACT FOR MORE INFORMATION

Key data: 205 mm, 650 mm

For sale: Gildemeister CNC lathe type Sprint 65 Linear equipped with a Fanuc 310I control. This CNC lathe is equipped with 2 equal spindles with a bar passage of 65 mm. The machine also has three turrets with 12 positions where you can place driven holders in any position! The upper turret is equipped with a Y-axis with a displacement of 80 mm ( (+50, - 30 mm). The turning diameter is 205 mm. The maximum turning length is 650 mm. The movement X1, X2, X3 is 165mm, the Z1 axis movement is 220mm, the Z2 axis movement is 150mm, and the Z3 axis movement is 768mm. The W2 axis movement is 690 mm and the maximum rapid traverses are 30 meters/min. The maximum speed of both spindles is a speed of 5,000 rpm and both spindles have a full C-axis. The tool holder holder on all turrets is VDI-30. The machine is also equipped with a hinged belt chip conveyor with right ejection and the machine has an Ir ...

Used loose curd line from OBRAM. New 2015. Line composition: - Plate whey cooler, - Whey tank, - Tubular thick curd coater, - Whey belt separator, - Paripac weigher/dosing machine. The machine is designed for dosing a specific quantity of product into the packaging machine. - Paripac bag packaging machine. Bagger designed for packing loose quark into bags. Packing weight 250/500 g.

Turning diameter 80 mm Bar diameter 20 mm Spindle speed 10000 rpm X1, Y1, Z1, X2,Z2 axes Controller Fanuc FANUC 160iB LNS barfeeder

X-axis: 2500 mm Y-axis: 920 mm Z-axis: 820 mm Work table: 3100 x 900 mm Spindle Exception: SK/ISO40 Spindle speeds: 20 - 18,000 rpm. Tool changer: 30 pcs. Control: Heidenhain iTNC 530 Equipped with: -Conveyor - Cooling by spindle 40 bar - ISO40 tools -Operating instructions Country of origin: Germany Motor power: 35 KW Machine LxWxH: 6000 x 3800 x 2950 mm (transport dimensions) Machine weight: 25.000 kg

x-travel: 885 mm y-travel: 600 mm z-travel: 600 mm control: iTNC 530 Heidenhain Main spindle:: Max. rpm: 1 - 28.000 min/-1 power capacity - main spindel: 35 / 25 kW max. Torque: 119 / 85 Nm tool taper: HSK A63 Swivel range milling spindle: B: -10° / +110° ° spindle bearing diameter: 80 mm rotary table:: table diameter: 750 mm rotation range: C: 360 ° rotary speed: max. 100 min/-1 max. table load: 600 kg feeds:: feed speeds: 1 - 90.000 mm/min rapid traverse: 90 m/min Feed force: X/Y: 13,8 kN Feed force: Z: 10,35 kN tool magazin:: number of toolpositions: 30 pos. max. tool diameter: 80 mm max. tool-dia with free toolbox: 140 mm max. tool length: 300 mm max. tool weight: 10 kg Workpiece dimension: max. workpiece height: 460 mm Max. Workpiece Area: ca. 750 x 600 mm passage: max. 600 mm total power requirement: 60 kVA weight of the machine ca.: 12 t dimensions of the machine ca.: 4,5 ...

We have for sale used RADEMAKER CRUSTO BREAD LINE WORKING WIDTH 600 MM. The line is rarely used and in good condition. Been in storage for the last 6 years waiting to go into production again but because the factory changed its mind it is now being sold. The conveyor belts have been removed, they have hardened in storage. Otherwise the line has been checked and everything is working. Product specification: Products capacity for example. Niittypitko ( A long Finnish bun ) 2000 pcs / h, 2 rows, dough thickness 3-4 mm Coffee bread Kranssi 2000 pcs / h, 2 rows, dough thickness 3-4 mm Muhku ( sweet bun ) 10 000 pcs / h, 8 rows, dough thickness 6-8 mm Ciabatta, 7200 pcs / h, 6 rows Folded bread, 4800 pcs / h, 4 rows, dough thickness 5 mm Capacity based on 20 strokes per minute for the retracting belt, in combination with the product discharge conveyor system  ...

Gildemeister Sprint 65 Linear CNC lathe (with 2nd spindle, 3 turrets and Y-axis) Diameter of spindle bore 65 mm Spindle speed 5,000 rpm Spindle motor 25/20 kW Spindle speed counter spindle 5,000 rpm X-axis movement 165 / 165 / 165 Movement Y-axis 80 mm Z-axis travel 220 / 150 / 650 mm Movement of the W-axis (counter spindle to the main spindle) 690 mm C-axis indexing 0.0001° Number of towers 3 Number of tools on turret 12 (3x 12) Tool cone VDI 30 Bar Feeder LNS Quick Load Servo 65 If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail. Feel free to check out our other listings for a full overview of our stock.

Gildemeister Sprint 65 Linear CNC lathe (with 2nd spindle, 3 turrets and Y-axis) Diameter of spindle bore 65 mm Spindle speed 5,000 rpm Spindle motor 25/20 kW Spindle speed counter spindle 5,000 rpm X-axis movement 165 / 165 / 165 Movement Y-axis 80 mm Z-axis travel 220 / 150 / 650 mm Movement of the W-axis (counter spindle to the main spindle) 690 mm C-axis indexing 0.0001° Number of towers 3 Number of tools on turret 12 (3x 12) Tool cone VDI 30 Bar Feeder LNS Quick Load Servo 65 If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail. Feel free to check out our other listings for a full overview of our stock.

Turbo Rotary Rotary filling line Serial: R0061192 2011, Stainless, rotary filling line, consists of Turbo D253P depositor, denester, lid applicator and lid sealer and outfeed conveyor, previously used for filling four pots of sauce in a multipack, tooling dimenions 100mm x 100mm, touch screen controls, 3Ph

KHS/ALFILL ULTRACLEAN RINSER-FILLER-CAPPER Model: linefill CP48-16-8, Year of make: 2003 Capacity: 6000 bottles per hour Bottle volumes: 1000 ml, 750 ml, 500 ml, 330 ml, 250 ml, 200 ml Format change time: 15 minute USED SLEEVER CLEVER USED SHRINK TUNNEL USED ACCUMULATION CONNECTION AND EXIT CONVEYOR SYSTEM

Brand: KOMAR/ BK TECHNOLOGIES Total dimension L: 11000 Electric connection: 380 Total dimension H: 1900 Total dimension W: 1500 complete baking line; Productivity up at 400kg/hour for 100g formats; 50g sandwiches to 300g; Manual ingots loading, automatic panning; composed of ribbon input; 3 height-adjustable rolling mills; floury; 1 cutting unit with 1-5 ways/carpet flour recovery; webbing tape dough advancement; cutting group transversal; counter-rotating moulder belt; tear-off trolley tape and collection tape and in chin baking tray; exit plate

Aseptic Tetra Pak Filling Line – A3/Flex 150V (250 ml Prisma) High-quality aseptic carton filling line designed for efficient packaging of liquid food products in 250 ml Prisma cartons. The line is equipped with reliable Tetra Pak equipment and features low operating hours, making it an excellent solution for beverage and dairy producers seeking dependable aseptic packaging capacity. Line Configuration - The filling line consists of the following equipment: - Tetra Pak Filling Machine – A3/Flex 150V - Tetra Pak Accumulator – ACHX 10/35N - Tetra Pak Straw Applicator – TSA21 - Tetra Pak Film Wrapper – TFW67 - Tetra Pak Filling Machine - Core aseptic filling unit for 250 ml Prisma cartons. Technical Specifications - Manufacturer: Tetra Pak - Model: A3/Flex 150V - Year of Manufacture: 2008 - Package Volume: 250 ml - Package Format: Prisma - Capacity: 9,000 pac ...

Hydraulic cylinder, synchronous cylinder, steering cylinder -Piston diameter: 38 mm -Piston rod: Ø 16 mm (M12 thread) -Stroke: 20 mm -Dimensions: 234/89/H50 mm -Weight: 3 kg

High throughput tray washing system, designed to accommodate a total of up to 1500 crates per hour, split over two conveyorised lanes.

grinding length: - mm grinding width: - mm workpiece height: - mm workpiece diameter: - mm material thickness: - mm centre distance: - mm total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m No. 4104 Throughfeed grinding / deburring machine LINEAR ABRASIVE Isolde The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 800 mm, 650 mm, 550 mm

Machine Details Stock-No. 1105-04022 Type of machine Machining Center - Universal Make DMG LID MAHO Type DMU 80 eVolution LINEAR Year of manufacture 2012 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Germany Delivery time to be agreed Freight basis ex site Price Technical details X-Travel 800 mm Y-Travel 650 mm Z-Travel 550 mm control iTNC 530 Heidenhain distance spindle nose and table 150 - 700 mm Turning Speed Range - Main Spindle max. 18,000 min/-1 Power capacity - main spindle 35 / 25 kW max. torque 130 Nm tool taper HSK table surface area 800 x 700 mm max. table load 600 kg rotatable C: 360° Swivel range B: -5 / -110 ° number of toolpositions 120 pos. tool taper HSK 63 max. tool diameter 80 mm max. tool-dia with free toolbox 160 mm max. tool length 315 mm max. tool weight 8.0 kg Change-time chip-to-chip approx. 5.9 sec F ...

Bakon Apricot/Fondant Coating Belt Line Year of construction 2000 Continuous flow device, with round belt spreader belts with instantaneous water heater system and jelly instantaneous water heater Working width 550mm Apricot station with airless nozzles Fondant station with splash device and nozzles for zigzag pattern with drying tunnel with melting tank for approx. 100l fondant with spared material pump - Bakery condition not cleaned - partially. in need of overhaul

Specifications will follow asap

Digital Programs TSC, Colour Display, Chromed Air Table, Chromed Side Air Tables, Light Bariers, Standard Accessories

approx 9 m long

Line for laminating and cutting dough

The HAUG ionisation systems of the Static Line product line are AC voltage systems. They alternately generate positive or negative free ions in time with the mains voltage (50 Hz) to neutralize electrostatic surface charges. It can be applied to various materials, such as glass, paper, plastic, etc.

1 x Polar 115X guillotine, equipped with : air table, 2 side tables, 2 knives, photo cells, program 1 x Polar RA-4 jogger 1 x LW 1000-4 stack lift 1 x TR-130 unloader

roll diameter: 660/700 mm roll length: 2100/1800 mm rolls drilled: Kernbohrung nip adjustment: motorisch drive power:: -- kW Condition: used Specification: 4-Roll L-Calender - Line - second-hand 4-roll Buzuluk L-calender 700x1800 Mixing mill Buzuluk 660x2100 Complete 4-roll L-calender line. The line was used for the production of transparent PVC. However, the basic machines can also be used for rubber. The most important machines in the line: Pos. 8: Liquid mixer make Trusionma hot and cold Pos. 10: KO Kneader make BUSS Item 12: Buzuluk 660x2100 mixing roller mill Item 14: 4-roll L-calender make Buzuluk 700x1800 Items 15-19: Tempering and basin equipment behind the calender Roller conveyor Item 20: Layer thickness profile measuring device Item 23: Rewinding device The system was used for transparent soft PVC. Machines are still installed. The data for this ad was  ...

x-travel: 500 mm y-travel: 450 mm z-travel: 400 mm Control: HEIDENHAIN iTNC 530 Table dimensions: 500 x 380 mm table weight: 500 Kg c-axis: 0.001º ( ± 360º) 0 b-axis: 180 ° rapid traverse X-axis: 80 m/min feeds: 50 m/min spindle turning speed range: 18.000 U/min spindle taper: BT- 40 spindle drive: 30 kW Internal cooling system: 40 bar handwheel: HEIDENHAIN HR-410 total power requirement: 50 kVA weight of the machine ca.: 6,5 t dimensions of the machine ca.: m Chip conveyor: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: DMG Type: Sprint 42/10 Linear Year of Make: 2014 Technical data working space Max. travel X-axis: 50 mm Max. travel Y-axis: 350 mm Max. travel Z-axis: 120 mm Workpiece Max. workpiece diameter: 42 mm Max. workpiece length: 320 mm Max. bar passage: 42 mm Control: Fanuc Basic functions Sub-spindle Y-axis Accessories Bar Feeder Säneförderer Tool Holder Condition Perfect Availability Immediately after payment Terms and conditions of purchase: no guarantee, no warranty, no return Terms of delivery: Ex-works Terms of payment: 100% prepayment

1. Qty. 1 Second-hand slitting line Mfc.: DANIELI WEAN UNITED, LOOPCO, Built: 1994 Relocated: 2021 Raw Material CR, GI, COLOR COATING COIL Strip Width: 400 - 1,210 mm Thickness: 0.5 - 1.8 mm Slitter Stand (OD420 x ID255 10/15T=Each 30EA) Scope of supply: Uncoiler Coil Car with Coil Skid Uncoiler with Snubber Roll Coil Opener & No. 1 Pinch Roll Crop Shear Threading Table No. 2 Pinch Roll & Side Guide Slitter Stand Scrap Winder Loop Table Tension Pad with Separator Bridle Roll with Guide Table Recoiler with Separator Recoiler Coil Car with Coil Skid Hydraulic Equipment Electric Equipment 2. Qty. 1 Second-hand cut-to-length line Mfc.: DONGBU ENG Built: 1997 Relocated: 2021 Raw Material CR, GI, COLOR COATING COILS Strip width: 600 – 1540 mm Thickness: 0.5 - 2.0 mm Coil Weight Max. 15,000 Kg Sheet Length: 500 - 2,800 mm Scope of supply: Coil Car Unco ...

Copilot system with touch-screen monitor Rounding and backing station 1st gluing station with viscosity control, book mark suction device 2nd gluing station Head and tail bending station Gauzing unit Kolbus BF 527 casing-in unit Kolbus FE 604 book forming and pressing machine Casing prestacking conveyor Gluing station with circulation and premelter Backlining and headbanding station pressing station with teflon band Case prestacking conveyor Case bending machine Case forming station Case magazine right hand infeed Kolbus DS 391 stacker Kolbus SU 651 Kolbus HD 142P three-knife-trimmer including all the cutting tables and knife changing unit Kolbus FS.A FS.L XMT 680

turning diameter: 20 mm turning length: 230 mm control: Fanuc 16iT total power requirement: 0,55 kW weight of the machine ca.: 2,6 t dimensions of the machine ca.: 2275 x 1300 x 1760 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 750 mm y-travel: 650 mm z-travel: 650 mm total power requirement: kW weight of the machine ca.: 12 t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Precision balance, spring balance, tension force gauge -Manufacturer: Pesola, precision spring balance type Macro-Line 80196 -Measuring range: 200 Newton -Division: 2 N -Dimensions: 400/40/H40 mm -Weight: 0.5 kg

Tool changer chain, chain magazine, tool changing system, tool magazine -for: max. 60 recordings -Hole: Ø 17 mm -Weight: 44 kg

CNC unit for corner notching in off-set design Brand: Atemag Type: Function Line Extra 2 Max drive speed 8,000 R.P.M. Max. tool spindle speed 12,000 R.P.M. Gear ratio i = 1:1,48 Turning direction left/right Torque max. 20 Nm Tool interface: Special Attention: price is just valid for standard version

CNC unit for boring and routing Brand: Atemag Type: Function Line Extra with two tool interfaces angle 90° Max. drive speed 10,000 R.P.M. Max. tool spindle speed 15,000 R.P.M. Gear ratio i = 1:1,5 Turning direction left/right Torque max. 20 Nm Tool interfaces: ER 32 / ER 16 Spindle for omega router/ ER 16

turning diameter: 325 mm turning length: 600 mm control: Siemens type: 840D Turret 12-fold, 12 stations: live tooling: turning speeds: 5000 U/min power capacity: 25 kW y-axis: mm c-axis: total power requirement: 35 kW weight of the machine ca.: 6,5 t dimensions of the machine ca.: 3,5x2,5x2,1 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC unit for boring, routing and sawing Brand: Atemag Type: Function Line Vario Viso With adjustable angle 0 - 100° Max. drive speed 15,000 R.P.M. Max. tool spindle speed 15,000 R.P.M. Gear ratio i = 1:1 Turning direction left/right Torque max. 15 Nm Tool interfaces: combination ER 25 and saw, saw blade flange 30 mm Version with one single clamping screw, locking with the lever

CNC unit for routing and boring Brand: Atemag Type: Function Line Soft Touch Pro With surface copying function with floating bell GX1 or GX2 or GX4 Max. drive speed 18,000 R.P.M Max. tool spindle speed 18,000 R.P.M. Gear ratio i = 1:1 Turning direction left/right Torque max. 20 Nm Tool interface: modular for ER 25, ER 32, saw flange, shrink- fit chuck

CNC unit for boring, routing and sawing Brand: Atemag Type: Ultra Line Mono With one tool interface, angle 90° Max. drive speed 10,000 R.P.M. Max. tool spindle speed 15,000 R.P.M. Gear ratio i = 1:1,5 Turning direction left/right Torque max. 22 Nm Tool interfaces: ER 25, ER 32, saw blade flange 30 mm, dia. max. 300 mm We recommend with saw blade or for heavy duty rough milling a gear reduction: Type MONO, version R Max. drive speed 12,000 R.P.M. Max. tool spindle speed 8,000 R.P.M. Gear Ratio i = 1:0,676 Torque max. 22 Nm

CNC unit for boring, routing and sawing Brand: Atemag Type: Vario Classic With one tool interface, angle 90° Max. drive speed 10,000 R.P.M. Max. tool spindle speed 15,000 R.P.M Gear ratio i = 1:1,5 Turning direction left/right Torque max. 20 Nm Tool interfaces: ER25, ER 32, saw blade flange 30 mm, sawblade dia. max. 180 mm or modular

Multispindle drilling head unit for cnc working centres Make: ATEMAG Multispindle drilling head for economical drilling of numerous holes or complex hole patterns in just one machining stroke. Max. drive speed: 10.000 Rpm Max. tool spindle speed: 10.000 Rpm Gear ratio i= 1:1 Torque: max 1-5 Nm Number of tool output: on request

CNC unit for boring, routing and sawing Brand: Atemag Type: Ultra Line Vario Viso Angle adjustment 2 x 0 - 100° on two sides adjustable Max. drive speed 13.760 R.P.M. Max. tool spindle speed 15,000 R.P.M. Gear ratio i = 1:1,09 Turning direction left/right Torque max. 22 Nm Tool interfaces: combination ER 25 and saw, saw blade flange 30 mm, Pitch circle 45mm and 52mm

DMG GMX 300 linear year 2008. GMX 300 LINEAR with turning length 1585 mm (tailstock 1500mm) control: Siemens 840D Powerline Hours in picture The DMG GMX 300 Linear is a high-performance machine tool designed for complex turning and milling tasks, often used in industries such as aerospace, automotive, and precision engineering. Here are the key features and specifications for a 2008 model: Key Features: - Type: The GMX 300 Linear is a turn-mill machine, which combines both turning and milling operations in one setup, improving efficiency and reducing setup times. - Linear Motors: Equipped with linear motors for high-speed movements, which provide increased precision, dynamic performance, and reduced wear compared to traditional ball screw systems. - Axes: It usually offers multiple axes (up to 9), enabling simultaneous multi-axis machining for producing complex parts in a single se ...

CNC unit for moulding or saw blade package Brand: Atemag Type: Ultra Line Mega Cutter Position of tool spindle 90° Max. drive speed 12,000 R.P.M. Max. tool spindle speed 7.690 R.P.M. Gear ratio i = 1:0,641 Turning direction left/right Torque max. 22 Nm Tool interfaces: arbour with 30mm diameter, 120 clamping length, max. tool diameter 160mm - without tools -

CNC unit for boring and routing Brand: Atemag Type: Function Line Quattro With four tool interfaces 2x boring / 2x routing Max. drive speed 10,000 R.P.M. Max. tool spindle speed 15,000 R.P.M Gear ratio i = 1:1,5 Turning direction left/right Torque max. 20 Nm Tool interfaces: ER 25, ER 32

The 2005 Deckel Maho DMC 104 V linear is a CNC (Computer Numerical Control) vertical machining center manufactured by Deckel Maho, a part of DMG MORI. This machine is known for its precision and efficiency in machining tasks, including milling, drilling, and tapping. Here are some key features and specifications of the 2005 Deckel Maho DMC 104 V linear: - Travel and Table Size: - X-axis travel: Approximately 1040 mm - Y-axis travel: Approximately 600 mm - Z-axis travel: Approximately 500 mm - Table size: Large enough to accommodate substantial workpieces - Spindle: - Spindle speed: High rotational speeds for efficient cutting - Spindle power: Sufficient for heavy-duty machining tasks - Linear Drives: - Equipped with linear drives for the X, Y, and Z axes, providing higher precision and faster movements compared to traditional ball screw drives. - Control System: - Typically equip ...