plate heat exchanger used for sale

APV PASTEURIZATION SYSTEM FOR FISH BROTH 1,000 LITRES/HOUR Automatic system designed for the pasteurization of 1,000 litres/hour of strained fish broth for subsequent packaging. Manufacturer: APV Year: 2002 OPERATION DESCRIPTION: - Inlet temperature: 20 °C - Process temperature: 105 °C - Outlet temperature for packaging: 35 °C The whole process consists of different stages that can be programmed using the control panel: 1. Sterilization: carried out by the circulation of hot water at a temperature of 115-120 °C for 30 minutes. 2. Production with water: cooling water flows inside the circuit until the process temperature that will be applied to the product is reached. 3. Production: the unprocessed product is fed into the regulation tank and then the production phase takes place in the circuit. 4. Cleaning-in-place: the installation is cleaned in place by ...

A plate heat exchanger WMW is available. Heating medium: steam, cooling fluid: water, temperature range: 15°C-90°C, flow rate: 2000l/h, steam quantity: 300kg/h, weight: approx. 355kg. An on-site inspection is possible.

Fisher Type: Flash Pasteurizer Year: 1999 Efficiency: 120 Hl

Tetra Pak desserts pilot UHT plant with an pasteurisation, indirect and/or direct (VTIS) heating module @ 225 ltr/h and only a pasteurisation step @ 125 ltr/h, previously used in a R&D centre for desserts., Indirect unit, skid mounted, including:, - Open level tank, serial number: DFB-5259-BT01, year 2008, 50 ltr with propellor agitator (Lightnin ECL-M59-25)., - Feed pump (mono / screw pump, Netzsch, NM031BH02S12H, serial number 387231, year 2007, 120 - 300 ltr/h, speed 20 - 80 rpm, discharge pressure 2 bar, product temperature 5 - 20 °C)., - Lobe pump, Alfa Laval, SRU1/005/LD, serial number 431441, year 2008, motor: 0,37 kW, 400 V, 50 Hz, n1: 1.360 rpm, i: 15,57 n2: 89 rpm., - Heating module A, centrifugal pump: Alfa Laval FM-0/95, serial number: 31457-17997., - Heating module B, centrifugal pump: Alfa Laval FM-0/95, serial number: 31457-17999., - Heating module C, centrifugal pump: Al ...

Stock number: A223, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Plate heat exchanger, Heating surface: 0,6 m², Dimensions: L 495 x W 198 x H 125 mm., Total height: H 215 mm., Working temperature: 0/95° C, Working pressure: 6 bar, Manufacturer: APV, Type: T 4, Year: 1989

This plate heat exchanger from APV offers efficient and reliable heat transfer with a capacity of up to 240 hl/h in two stages. With a generous heat exchange area of 134 m² and a robust design for operating pressures up to 23 bar, this unit is well suited for demanding applications in breweries and the beverage industry. Thanks to its solid construction and compact design, it can be easily integrated into existing systems while ensuring high thermal performance and energy efficiency. An excellent and cost-effective solution for wort cooling, product heating, or other process applications. Our team at VBW Asset Trade will be happy to answer your questions., Capacity: 240 hl/h 2 stages, Heat exchange area: 134 m² plate tracery min. 880 mm, max. 910 mm, actual 885 mm, Operating pressure: 23 bar, Length: 2000 mm, Width: 700 mm, Height: 2000 mm

This vertical plate heat exchanger from GEA Ahlborn is designed for efficient temperature exchange between two liquids. It is made of stainless steel and is designed for a permissible pressure of 16 bar and a permissible temperature of 100 °C, making it suitable for a wide range of industrial and brewing applications. The unit has a robust base construction with supports that ensure stability during operation. With dimensions of 1.55 m (L) × 0.45 m (W) × 1.50 m (H) and a weight of 1,500 kg, it offers a compact yet robust solution for heat transfer needs. Our team at VBW Asset Trade will be happy to answer your questions., Permissible pressure: 16 bar , Permissible temperature: 100 °C, Length: 1,55 m, Width: 0,45 m, Height: 1,50 m, Weight: 1500 kg, Material: stainless steel, Position: vertical, Base construction: mainstays

Two-stage plate heat exchanger. First stage - Heating: hot water / product Product inlet approx 61-62°C, outlet approx 72°C, flow rate 600 hl/h; Hot water inlet approx 72,5°C, flow rate 750 hl/h Second stage - Regeneration: product / product Product inlet approx. 0-4°C, product outlet approx. 61-62°C, flow rate 600 hl/h; Product inlet approx. 72°C, product outlet approx. 11-14°C, flow rate 600 hl/h, Additional title: 2-stage heat exchanger, Capacity: 600 hl/h, Hot water: 750 hl/h, Operating pressure: 21 bar, Operating temperature: 100 °C, Length: 2,15 m, Width: 0,95 m, Height: 2,15 m, Weight: 5000 kg, Material: EPDM HT / NBR / 1.4439

Stock number: A226, Volumen: 2,813/2,910 litre, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Plate heat exchanger, Heating surface: 2,52 m², Working temperature: -10/+150° C, Working pressure: Max 16 bar, Dimensions: L 180 x W 180 x H 630 mm., Connections: 4 pcs. Ø 1½, Manufacturer: Danfoss, Type: XGM032H-1-60, Year: 2017, Other: Specially developed for district heating and district cooling systems

Additional title: one-stage, Allowable pressure (wort & water): 10 bar, Allowable temperature (wort & water): 120 °C, Test pressure: 13 bar, Volume: 572 l, Length: 1,537 m, Weight: 3898 kg, Features: DN80 dairy coupling; 421 plates; fluid group 1

Plate dimensions: 1700 x 400mm. Number of plates: approx 100x pieces. Own weight: 1060kg. Volume: 90.17 liters. Auction-ID: A1-49552-78

Plate dimensions: 1750 x 500mm. Number of plates: approx 65x pieces per exchanger. Weight per piece: 780kg. Volume: 69.20 liters. Auction-ID: A1-49552-79

Sheet dimensions: 900 x 400mm. Number of plates: approx. 50 pieces. Weight: 322kg. Volume: 18.3 liters. Auction-ID: A1-49552-74

Plate dimensions: 1500 x 500mm. Number of plates: approx 125x pieces. Weight: 1135kg. Auction-ID: A1-49552-76

Plate dimensions: 1500 x 400mm. Number of plates: approx 112x pieces. Own weight: 755kg. Volume: 50.9 liters. Auction-ID: A1-49552-77

Sheet dimensions: 900 x 400mm. Number of plates: approx 75x pieces. Weight: 342kg. Volume: 25.5 liters. Auction-ID: A1-49552-75

Cat. No. 07-109-3 in very good condition Standard: Manufacturer NEUMO Type DUPLEX 80/100 Operating/temperature 90C Maximum operating pressure 10 bar Adjustable V2A - Frame Heat conduction inside NW 50 Heat conduction outside NW 100 Product management NW 80 with 7 tubes x 6 m long without measuring technology and connections Dimensions and weight: Length: 620 cm Height: 140 cm Depth/width: 70 cm Weight: 755 kg For inquiries: Tel: 09353 90905-0 Fax: 09353 90 90 5-22 or 0171 651 8248 We also have other winery machines - request our complete catalogue! All prices ex works plus law VAT Intermediate sale reserved! Delivery time: immediately from stock The price quoted is only valid for 1 piece

Tank- & Environmental Protection Wozniack Specialist company according to Section 19 water budget law Ladies and gentlemen, we offer a 22,500 litre pressure vessel. This is a 22.5 cbm pressure vessel made of steel from the lined with an inner coating. Material S235JRG2 Steel . Container dimensions: Length : approx. 6,100 mm diameter: approx. 2,300 mm weight: approx. 5,500 kg Pressure: 10 Bar Shape: cylindrical ---------------------------------------------------------------------- --------------------- Of course, you can also help shape your tank system! All our systems are used in our company by selected employees extensively checked and checked. We also offer an inexpensive delivery on request. It is possible to  ...

Plate apparatus Sigma 37 Manufacturer: API Schmidt-Bretten GmbH & Co.KG Type: Sigma 37 Serial number: 61/28925/06 Output: 18,000 l / h Year of construction: 1978 Product: Solution 60% TS Temperature: 20 ° C - 95 ° C Max. Betreibsüberdruck: 10 bar Chamber: Serial number: 61/17825/04 Output: 18,000 l / h Holding time: 40 s Year of construction: 1978 Max. Operating pressure: 6 bar Tension: Initial size (new seals): 1.345 mm Biomass (seals consumed): 1,277 mm Movable lid.

Cat.-No. 14.00230 in very good condition Cat.-N°: 14-00230L available: 1 unit 115 m tube in AISI 304 DN 40 Mount according to your Specifications Other Sizes upon Request Measurement and weight: total height: 400 mm Width: 700 mm total length: 3000 mm weight: 185 kg All prices are valid Ex-Works, excl.VAT Freight Charges: depending on dimensions and destination Delivery: from D-97753 Karlstadt-Karlburg Subject to prior sale General terms and conditions listed on our website. Prices are subject to change without notice. Visit our Web-Site: www.eurolux-ag.com

VA Tube Bundle WT Manufacturer: E. Gessner AG, built 1982, material 1.4465, 1.4571, Dimensions: Diameter Coat: 600mm Effective Length Pipes: 5000mm Di-inner tube: 20mm Da inner tube: 24mm Total length 5880mm Total height: 1000mm Connections Coat: DN 200 Connections Pipe side DN 50 Foot distance (holes) 3000mm Transmission area: 65m2 / 78m2 (indoor/outdoor) 208 inner tubes Ab. Pressures: -1 / 3 bar inner tubes -1 / 6bar coat Temp range: -10 / +200 Price refers to a heat exchanger. 2 present

Tube bundle heat exchangers Manufacturer: Orsymonde France Type: Tube bundle Year of construction: 2000 Serial number: 1.00.098 Carrier: Medium: Water Material: 1.4404 (V4A) Operating pressure: 3 bar Temperature: ambient temperature Test pressure: 6 bar Coat: Medium: Gas Material: 1.4404 (V4A) Operating pressure: 0.5 bar Temperature: ambient temperature Test pressure: 1 bar Dimensions: Length: 2.070 mm Width: 1.070 mm In very good condition!

GEA Canzler spiral heat exchangers with milk pipe fitting on the input and output, Operating pressure:-1 to 6 bar Operating temperature:-10 to 200 C ° Volume: 32 liters Area: 10 m2 Number of screws: 12 Empty weight: 400 kg

GEA plate sterilizer 4 sections max working pressure: 16 bar max working temperature: 140 St C

MTU 8V396 TB 53 Heat Exchangers Charge Air Coolers Intercoolers 2930-12-334-9601 / 0010985920

MTU 8V396 TB 53 Heat Exchangers Charge Air Coolers Intercoolers 2930-12-334-9277 / 0052000675

MTU 12V396 SE 94 / TE 94 Exchangers Charge Air Coolers Intercoolers 2930-12-A07-0048 0030982820

MTU 16V4000 M 90 A BANK Heat Exchangers Charge Air Coolers Intercoolers 2930-12-378-7717 5260981120

MTU 16V4000 M 90 B BANK Heat Exchangers Charge Air Coolers Intercoolers 2930-12-378-7720 5260981120

JENBACHER TYPE 4 Heat Exchangers Charge Air Coolers Intercoolers J414 / J416 / J420 PNo:1202340

GUSCOR HGM560 / SFGLD560 Heat Exchangers Charge Air Coolers Intercoolers Part Number 7673532

JENBACHER TYPE 3 Heat Exchangers Charge Air Coolers Intercoolers 6141424 / 1212197 / 369829

MWM TCG 2020 V12/V16/V20 Heat Exchangers Charge Air Coolers Intercoolers Part Number 12452511

MTU 8V396 TB 53 2930-12-334-9601 / 0010985920

MTU 8V396 TB 53 2930-12-334-9277 / 0052000675

MTU 16V4000 M 90 A BANK 2930-12-378-7717 5260981120

MTU 16V4000 M 90 B BANK 2930-12-378-7720 5260981120

JENBACHER TYPE 4 J414 / J416 / J420 PNo: 1202340

GUSCOR HGM560 / SFGLD560 Part Number 7673532

Double pipe heat exchanger pipe heat transfer for biogas plant, sewage treatment plant sludge hygienization - used - Manufacturer AEL GmbH Leisnig Type Double pipe heat transfer W202 Fabr. No. 7.0637.940/29-56 Built in 1997 Permissible betieb pressure 6 bar Permissible operating temperature 90°C Content 1090 l Kerb weight 6510 kg Length approx. 11 m Width approx. 3 m Depth approx. 1.5 m

GWK KU 90-108 Process Cooling Heat exchanger radio stainless steel FP 50-91 , 1006 kW Flow rate operating water circuit: 92 qm/h Cooling water circuit: 109 sqm/h Connection power: 22kW Head: 52 mWS 2 pieces available

heat exchanger Tube bundle heat exchanger LWH: 3200 x 750 x 1250 mm

double piston compressor system semi-hermetically air-conditioning compressor Compressor Chiller 2 x 18.5 Kw with frequency inverters 2x Semi-hermetic piston compressor Manufacturer: Bock Type: HGX5/830-4 N°: AM18158A014 & AM37155A014 380/420 V; 50 Hz; 3 ph; 1450 rpm. Displacement: 72.20 m3; 19/25 bar Power with cooling conditions and refrigerant R407C: 39.32 kW Power with cooling conditions and refrigerant R404A: 41.27 kW Power with conditions and refrigerant R134a: 31.45 kW 4x Plate heat exchanger Manufacturer: GEA WTT Gmbh Type: WP7M-120 Y.O.M.: 2006 max. Pressure: 30 Bar Temperature: -195/+195 °C Content Page 1: 13.69 Ltr. Content Page 2: 13.92 Ltr. 2x Liquid collector Cat. 2 Manufacturer: FricoMEC Type: RV-300X606 Volume: 35 Ltr. Pressure max:28 bar Temperature: -10/+120 °C 2x Inverter Manufacturer: Fuji Electric Type: FRN18.5F1S-4E 3ph 380/48 ...

Pasteur 500l/h Gas newly overhauled automatic temperature control

DeDietrich oil boiler QUANTROL Temperature Controller Tube in tube heat exchanger LIVERANI Stainless Steel Impeller Pump Pre-installed mobile complete system with impeller juice pump, efficient boiler, heat exchanger and automatic control, consisting of: Chassis mounted on 2 fixed and 2 swivel castors 63kW boiler with oil burner circulating pump Pressure expansion tank Automatic temperature control Tube in tube heat exchanger Capacity 750l juice /h Oil consumption: approx. 6l/h at full load

USED STAINLES STEEL 316L TALLERES MORES 10,5 M2 TUBULAR EXCHANGER REF.: C6296 General characteristics: Manufactured by TALLERES MORES2 Type Tubular exchanger Material Stainless steel 316L Year built 2000 Technical characteristics: Exchange surface 10,5 m2 Tubes passes 2 Casing passes 1 Tubes length 2490 mm Casing diameter 300 mm

available CHILLER Yom: 2012 85kW cooling power incl. Power Panel, Panel for Water preparation

Available in stock 1 x Used Vicarb Heat Exchanger, model V45. Plates are stainless steel AISI 316. Frames are mild steel, painted. The equipment is used but in good working conditons. REP : 708 kW A MAXI: 165 mm A MINI: 159 mm Dimensions: 50cm x 53cm x 165cm (WxLxH) Weight: 540 kg

Alfa Laval Plate Heat Exchanger T20-BFG heat exchanger from 2008, complete (closed model), 1 available. 221 L, 10 bar Manufacturer: Alfa Laval Model No.: T20-BFG Type: Plate Heat Exchanger Serial Number: 30106-36399 Capacity [L]: 221 Pressure [bar]: 10