plate frame used for sale

A fully automatic Schüco glazing bead saw is available. Saw blade diameter: 400mm, cutting angle: 45°/90°, motor type: E63SP-2, speed: 2800rpm. On-site inspection is possible.

SPECIFICATIONS: Working width: 3000 mm Working height: 2500 mm 4 push-button plate suspension handles TS/500 Interface 4 safety light barriers Installed power: 3 kW

Capacity: 60 ton Throat depth: 275 mm Ram stroke: 5 -100 mm Shut height (stroke down, adjustment up): 375 mm Table surface area : 740 x 470 mm Number of strokes: 14 - 100 s.p.m. Required power: 10 kW Dimensions L x W x H: 2.300 x 1.500 x 3.000 mm Weight of machine approx.: 3,5 ton

Stock number: R250, Frame agitator, stainless steel,, mounted on bridge,, D 865 mm., Material: Stainless steel AISI 304, Frame size: D 865 mm.

Capacity: 25 ton Throat depth: 250 mm Ram stroke: 6 - 60 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 190 mm Height of the bolster plate: 50 mm Table surface area : 500 x 400 mm Slide area: 350 x 250 mm Tool Clamping Hole Ram: 40 H7 mm Number of strokes: 160 s.p.m. Dimensions L x W x H: 1.300 x 1.500 x 1.995 mm Weight of machine approx.: 2 ton

Stock number: R416, Frame agitator, stainless steel,, Wall-mounting, with lid., 1,5 HP motor, 100 rpm., D 900 mm., Material: Stainless steel AISI 304, Frame size: D 900 mm.

Press capacity: 30 ton Throat depth: 160 Ram stroke adjustable: 20 - 45 mm Slide adjustment: 10 / 60 mm Shut height (stroke down, adjustment up): 220 mm Table surface area : 470 x 300 mm Slide area: 250 x 190 mm Number of strokes: 80 - 240 s.p.m. Required power: 4 kW Dimensions L x W x H: 1.400 x 1.800 x 2.000 mm Weight of machine approx.: 2,67 ton

Stock number: R1085, Frame agitator, stainless steel,, standing on foundation., 0,25 HP motor,, 46 rpm., 220/380 V., Frame D 420 x H 700 mm., Material: Stainless steel AISI 304, Frame dimensions: D 420 x H 700 mm.

Stock number: R1095, Frame agitator, stainless steel,, with scrape and bottom guide., Gear motor in the top,, 36 rpm., 220/380 Volt., For Ø 1200 mm. vat., Material: Stainless steel AISI 304, Frame dimensions: D 1150 mm.

Stock number: SF183, Frame filter, stainless steel,, standing on legs., Cabinet with hinged lid,, 5 stainless steel frames,, cabinet L 780 x W 355 x H 770 mm., Material: Stainless steel AISI 304

Stock number: SF182, Frame filter, stainless steel,, standing on legs., Cabinet with hinged lid,, 5 stainless steel frames,, Cabinet L 680 x W 250 x H 770 mm., Material: Stainless steel AISI 304

Stock number: SF160, Frame filter,, Seitz 20 x 20,, mounted with 4 frames.

Stock number: SF035, Frame filter, stainless steel,, Filtrox type Novox 40/40., Max 6 bar., Estimated 13 m2., standing on wheels., Excl. frames., Material: Stainless steel AISI 304

MAWEG frame press with automatic adjustment of height and width Press size 4.50 m.x 2.60 m. Frame Press Size: 5.30 x 3.40 x 1.30 m.

Crane frame 6800 mm This frame for cranes offers you the possibility to attach your crane and a trolley, as well as hanging scales or other hanging lifting equipment A-shaped supports for the necessary stability. Supports: Square tube 80 x 80 mm Double T-beam: 120 x 85 mm Length: approx. 6800 mm Height: approx. 4000 mm Width: 2000 mm Color: Yellow More items - new and used - can be found in our shop! International shipping costs on request!

• Model: LCX 3 • Device type: Vacuum copy frame • Machine type: Prepress machine • Application: Contact exposure of films on printing plates (offset, flexo, screen printing) • Vacuum frame with glass plate and blanket for perfect flatness • Light source: UV halogen or metal halide lamp (depending on model) • Control: Timer-controlled exposure, manual or automatic vacuum control • Application: Exposure of photochemical plates, clichés or screen printing films • Condition: Used, functional

Schließrahmen - Frame KSB Letter Press Heidelberg KSB A4 -1 Frame KSB Cylinder

Schließrahmen - Frame SBB Letter Press Heidelberg SBB - 560 x 820mm

Schließrahmen - Frame SBG Letter Press Heidelberg SBG A4 -4 Frame SBG Cylinder

Schließrahmen - Frame KS Letter Press Heidelberg KS -8 Frame KS Cylinder

SPECIFICATIONS: Working width: 3000 mm Working height: 2500 mm Expandable bottom stop Equipped with manual workholding system 02 Pressing devices Hanging control panel Installed power: 1.8 kW

Single column - eccentric press KRUPP type PEKRD 125 hMasch. No. 2861 Year of construction 1977Compressive force 125 ton. Projection 400 mmTable size 950 x 750 mmPlunger area 800 x 540 mmTable opening 100 x 250 mmStroke adjustment 8 to 160 mmPlunger adjustment 100 mmInstallation height largest stroke at the top max. 550 mmStroke rate 60 strokes/min. Table height above floor 800 mmEngine power 10 kWNetz connection 380 Volt, 50 Hz- Hydraulic overload in the plunger- Compressed air clutch-brake combination ORTLINGHAUS-

A package with a Brückner stenter frame and additional elements is available: 1) Brückner stenter frame SPR 2, 2) Goller washing machine, 3) ECO-Heat exhaust air purification system for Brückner stenter frame, 4) Foulard with Küsters control unit and hydraulic unit, 5) Pleva SL 2.1 entry straightening unit, 6) RS Scheuchl heat recovery system, 7) Pleva SL 2P exit straightening unit. An on-site inspection is possible.

Capacity: 35 ton Throat depth: 225 mm Ram stroke: 8 - 80 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 325 mm Table surface area : 600 x 450 mm Slide area: 300 x 225 mm Number of strokes: 160 s.p.m. Required power: 2,2 kW Dimensions L x W x H: 1000 x 1600 x 2200 mm Weight of machine approx.: 1,9 ton

A Brückner high-performance stenter, drying and fixing machine with steam heating is available. Chain type: SK917, min. product width: 600mm, max. product width: 3600mm, infeed length: 5000mm, outfeed length: 5000mm. Documentation available. An on-site inspection is possible.

PRESS DESIGN   drive system: eccentric / crank PRESS FORCES   total force (nominal): 80 to PRESS TABLE   table surface (left-right): 850 mm   table surface (front-back): 550 mm SLIDE   table surface (left-right): 560 mm   table surface (front-back): 376 mm   spigot hole diameter: 50 mm   stroke: 110 mm   stroke rate (max.): 60 /min SLIDE (MECHAN. PRESS)   slide adjustment: 80 mm   stroke min.: 0 mm   stroke max.: 110 mm TOOL ASSEMBLY DIMENSIONS   shut height (stroke down, adjustment up), BDC: 360 mm DIMENSIONS / WEIGHTS   space requirements -left/right-: 855 mm   space requirements -front/back-: 1635 mm   total height: 2640 mm   total weight approx.: 5400 kg ATTACHMENTS (PRESSES)   2-hand engagement: yes   ...

CONTROLS   conventional PRESS DESIGN   drive system: eccentric / crank   frame design: C-frame, single sided PRESS FORCES   total force (nominal): 100 to SLIDE   slide force: 100 to   stroke rate (max.): 72 /min SLIDE (MECHAN. PRESS)   slide adjustment: 80 mm   stroke adjustment: yes   stroke min.: 8 mm   stroke max.: 112 mm TOOL ASSEMBLY DIMENSIONS   shut height (stroke down, adjustment up), BDC: 407 mm ATTACHMENTS (PRESSES)   2-hand engagement: yes for safe tools only

PRESS DESIGN   drive system: eccentric / crank PRESS FORCES   total force (nominal): 15 to PRESS TABLE   table surface (left-right): 360 mm   table surface (front-back): 260 mm SLIDE   stroke rate (max.): 165 /min SLIDE (MECHAN. PRESS)   slide adjustment: 40 mm   stroke min.: 7 mm   stroke max.: 60 mm TOOL ASSEMBLY DIMENSIONS   shut height (stroke down, adjustment up), BDC: 226 mm ELECTRICAL SPECIFICATIONS   total power consumption: 1.15 kW   mains voltage: 400 V DIMENSIONS / WEIGHTS   total weight approx.: 630 kg ATTACHMENTS (PRESSES)   safety guard / safety door: yes   2-hand engagement: yes   foot engagement: yes   European CE standards: yes

PRESS DESIGN   drive system: eccentric / crank PRESS FORCES   total force (nominal): 45 to PRESS TABLE   table surface (left-right): 700 mm   table surface (front-back): 440 mm   opening in bed (diameter): 40 mm SLIDE   table surface (left-right): 410 mm   table surface (front-back): 280 mm   stroke rate (max.): 110 /min SLIDE (MECHAN. PRESS)   slide adjustment: 65 mm   stroke min.: 0 mm   stroke max.: 90 mm   main drive power: 5.5 kW TOOL ASSEMBLY DIMENSIONS   shut height (stroke down, adjustment up), BDC: 380 mm   distance between columns (H-frame): 360 mm ATTACHMENTS (PRESSES)   2-hand engagement: yes   foot engagement: yes   European CE standards: yes

1 BABCOCK stenter for woven, roller width 340 cm, working width 320 cm, year 1995, 4 ECON-AIR chambers updated brand new in 2004, gas heated with MAXON burners, horizontal pin and clip chain, J-box entry, foulard, MAHLO weft streightener type RFMC 10-A from year 2001, cooling field, plaiter exit

1 UNITECH stenter type Redevo, year 2014, width 220 cm, 6 fields, gas heating, combined pin and clip horizontal chain, BIANCO finishing padder, MAHLO weft streigthener

PRESS DESIGN   drive system: eccentric / crank PRESS FORCES   total force (nominal): 50 to PRESS TABLE   table surface (left-right): 700 mm   table surface (front-back): 450 mm SLIDE   table surface (left-right): 430 mm   table surface (front-back): 200 mm   clamping surface diameter: 340 mm   spigot hole diameter: 40 mm   stroke: 90 mm   stroke rate (max.): 70 /min SLIDE (MECHAN. PRESS)   slide adjustment: 70 mm   stroke min.: 0 mm   stroke max.: 90 mm   main drive power: 3 kW TOOL ASSEMBLY DIMENSIONS   shut height (stroke down, adjustment up), BDC: 300 mm DIMENSIONS / WEIGHTS   space requirements -left/right-: 700 mm   space requirements -front/back-: 1295 mm   total height: 2300 mm   total weight  ...

PRESS DESIGN   drive system: eccentric / crank PRESS FORCES   total force (nominal): 80 to PRESS TABLE   table surface (left-right): 860 mm   table surface (front-back): 620 mm   thickness of bolster plate: 70 mm   opening in bed (diameter): 165 mm SLIDE   table surface (left-right): 570 mm   table surface (front-back): 390 mm   spigot hole diameter: 50 mm   stroke: 120 mm SLIDE (MECHAN. PRESS)   slide adjustment: 90 mm   stroke min.: 9 mm   stroke max.: 120 mm   main drive power: 5.5 kW TOOL ASSEMBLY DIMENSIONS   shut height (stroke down, adjustment up), BDC: 360 mm DIMENSIONS / WEIGHTS   space requirements -left/right-: 1420 mm   space requirements -front/back-: 1700 mm   total height: 2990 mm   to ...

Properties: Volume 1000 L Material V2A (AISI 304) 1.4301 Total height 1850 mm Depth 1200 mm Width 1000 mm Cubic design Surface outside 2B=IIIC ground Surface inside 2B=IIIC ground Description MJ UNI HIGH 1000 liter tanks with two different dimensions: Height: 185 cm Width: 100 cm Depth: 120 cm Or Height: 182 cm Width: 100 cm Depth: 115 cm Topsoil: Flat bottom Filling nozzle Subsoil: Cone bottom pulled forward Remaining Schedule Tank on rack with forklift shoes

2 metal doors in mint condition, complete with frame 60 cm wide, 2 m high, had not yet been installed

Sanding belt length 2200 mm, sanding belt width 400 mm, table length 1200 mm, usable height 120 mm, sanding width 390 mm, sanding belt speed approx. 21 m/sec, feed speeds 6 - 11 - 16 m/min, drive motor 7.5kW, feed motor 0.26 - 0.55 - 1kW, pneum. Belt oscillation and belt blow-out, incl. landing gear

✨ Grab it now †your top scaffold deal! ✨ We’ve got a 100 m² facade scaffold with a system width of 1.09 m , ready to use right away. The package includes a walk-through frame, adjustable base jacks, and everything you need for your next project. 🏗️ This set is based on the proven Layher Blitz frame scaffold and combines durable materials, high stability, and easy handling . The steel or aluminum decks are particularly long-lasting, and the integrated walk-throughs with ladders make working comfortable and safe. Thanks to the standardized 2.57 m frame length , the scaffold can be easily expanded and is fully compatible with all original components. 💪 The plug-in system allows for quick assembly and disassembly, saving valuable time on the construction site. At the same time, the sturdy design ensures you can work safely ...

🚨 Be quick †limited stock! We offer top Layher Blitz scaffold packages †100  m ² of fa çade scaffolding , system width 1.09  m . Includes access deck with ladder, base jacks, and everything you need to get started. The complete set for your next façade scaffold project †ready to use and available while supplies last . ⚡   This package is based on the proven Layher Blitz frame scaffold system with a 1.09 m system width. It includes heavy-duty steel or aluminium decks, access decks with integrated ladders, diagonal braces for structural stability, and base jacks for safe height adjustment †all original Layher components .   Thanks to the standardized 2.57 m bay length, the system is easy to expand and fully compatible with other Layher Blitz parts †ideal for professionals who want to work quickly ...

355 x 185 cm, 3 stamps on top, 2 on the side Used machine

Thermoforming press Jochnick & Norrmans 150/ton upper cylinder 100 Ton Lower Cylinder Table 1000x1000mm Built in 1973 New electrical cabinet in 1998 With light screen and wiring diagram Now in stock Price is freely loaded

Two identical single wood belt sanding machines Löwer are available. Sanding belt length: 1600mm, sanding belt width: 160mm, working width: 150mm, feed rate: 16m/min, extraction connection: 100mm. Machine dimensions X/Y/Z: approx. 1400mm/1000mm/1600mm, weight: approx. 650kg. On-site inspection is possible.

PRESS DESIGN   drive system: eccentric / crank   table cushion: yes PRESS FORCES   total force (nominal): 63 to   nominal work capacity: 630 kNm PRESS TABLE   table surface (left-right): 900 mm   table surface (front-back): 560 mm   opening in bed (diameter): 250 mm SLIDE   table surface (left-right): 450 mm   table surface (front-back): 310 mm   clamping surface diameter: 50 mm   stroke: 100 mm   stroke rate (max.): 100 /min SLIDE (MECHAN. PRESS)   slide adjustment: 80 mm   stroke min.: 17.5 mm   stroke max.: 100 mm DIE CUSHION (TABLE CUSHION)   number of cushions: 1 TOOL ASSEMBLY DIMENSIONS   shut height (stroke down, adjustment up), BDC: 340 mm   distance table - slide max.: 440 mm ELECTRICAL SPECIFICATION ...

Nominal width: 3000mm, Working width range: 600mm-2800mm, Layers: 1, Number of chambers: 6, Heating system: Gas, Air supply: top/bottom, Max. working speed: 100m/min, Chain arrangement: horizontal, Cooling cylinders: 2, Padder: twin cylinder Matex 6000, Exhaust fan: 1, Documentation available, On site inspection is possible.

Frame from JCB loader, axles, hydraulics.

Closing frame for a blow molding machine Kautex KB 50 Year of manufacture 1984 Overhauled in 2023 all cylinders overhauled and with new seals. The same applies to protective grilles, guide shafts, shape height adjustments, etc. All mounting threads of mounting plates reworked.

Key data: 3550 mm, 2250 mm

Frame press Hess Type SPEEDY Built in 1995 Crimping dimension 3550 mm x 2250 mm Insertion depth 100 mm Electric height adjustment of the press cylinders Hydraulic 160 bar pressure capacity Hydraulic power unit 2.2 kW 3 vertical cylinders: 1000 mm stroke, 20,000 N pressing force per cylinder 2 horizontal cylinders: 80 mm stroke, 12,500 N pressing force per cylinder Smallest dimensions without medium pressure beam horizontal 380 mm, vertical 320 mm Dimensions 4500 mm x 950 mm x H 2600 mm Weight 1,800 kg Loading dimensions Length 4500 mm x Height 2450 mm Width approx. 2400 mm