plate bending used for sale

Key data: 15 t, 66 mm

Burger Press D07 Length 1.20 m Width 0.60 m Height 1.70 m 2 Hand control Switch to foot control 1 press die

Bending tool, die, upper blade, upper tool, straightening tool -Tool for: Press brake -divided -Tool: 30° -Dimensions: 196 x 26 mm -Total length: 2997 mm -Lengths: 1x 390/4x 500/1x 607 mm -Weight: 102 kg

sheet width: 700 mm plate thickness: 2,0 mm distance between columns: 750 mm diameter of upper rolls: 76 mm total power requirement: ß,75 KW weight of the machine ca.: 0,29 t dimensions of the machine ca.: 1,3 x 0,8 x 1,3 mm Sheet bending machine with: - Capacity 1050 x 2 mm - High strength wrought iron rollers with SAE 1050 certificate. - Upper and lower roller driven, feed roller without drive - Footswitch - conical bending - Swiveling top roller - Safety device emergency leash - Documentation - 400 volts - CE certificate The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bending tool, die, upper blade, upper tool, straightening tool -Tool for: Press brake -Tool: 70° -Thickness: 30 mm -Total length: 475 mm -Lengths: 95/109/112/159 mm -Overall height: 193 mm -Weight: 18 kg

Bending tool, die, upper blade, upper tool, straightening tool -Tool for: Press brake -Tool: 60° -Thickness: 25 mm -Total length: 630 mm -Overall height: 192 mm -Weight: 16 kg

Bending tool, die, upper blade, upper tool, straightening tool -Tool for: Press brake -Tool radius: 3 mm -Thickness: 25/6 mm -Total length: 572 mm -Overall height: 192 mm -Weight: 16 kg

Bending tool, die, upper blade, upper tool, straightening tool -Tool for: Press brake -Tool for: closing folds -Thickness: 25 mm -Total length: 470 mm -Overall height: 195 mm -Weight: 18 kg

Bending tool, die, upper blade, upper tool, deer foot tool, deer foot tool for press brake -Tool for: Press brake -divided -Tool: 82° -Dimensions: 190 x 46 mm -Total length: 355 mm -Lengths: 50/50/75/85/95 mm -Weight: 14 kg

Bending tool, die, upper blade, upper tool, deer foot tool, deer foot tool for press brake -Tool for: Press brake -divided -Tool: 82° -Dimensions: 165 x 47 mm -Total length: 2900 mm -Lengths: 200/300/400/500/500/1000 mm -Weight: 112 kg

Bending tool, die, upper blade, upper tool, straightening tool -Handover in its current condition as inspected -Tool for: Press brake -Tool: 88° -Thickness: 25 mm -Total length: 1009 mm -Lengths: 879/130 mm -Total height: 162 mm -Weight: 26 kg

Inv. Num. : 5648 Type: XOTM 60 Producer: UNIT Created: 2004 Parameters: Minimum tube diameter: 20 mm Maximum tube diameter: 60 mm Machine length: 4900 mm Machine weight: 130 kg

SECOND HAND BENDING PRESS - plates dimensions mm. 3100X800 - opening mm. 800 - 8 cyl. diam. 80 mm.

Key data: 3100 mm, 2700 mm, 2300 mm

Hydraulic press brake - conventional including paternoster system for uncomplicated tool change with 25 hangers. for export NC Press Brake Heut Lotze Type: PZ 100 - 25 Built in 1973 Pressure 100 t Bending length 2500 mm Stand width 2100 mm Weight approx.: 11.000 kg, Dimensions (LxWxH) approx.: 3,100 x 2,300 x 2,700 mm -------------------------- Paternostar system Schwab Maschinenbau Type: SIB 430/340 Built in 1982 Number of compartments 25 max. shelf load 150 Dpa max. device payload 3750 Press brake and paternoster can be purchased separately Maschinenhandel Nord new & used machines for industry, trade and commerce Import/Export Service & Advice Also take a look at our Other Ads. Many more drills available Or visit our more than 1000m² exhibition hall with new and used industrial and manufacturing machines, not far from the A20 motorway!

Inv. Num. : 1609 Type: CB90VZB SL 6000 Producer: DYNOBEND B.V. Created: 2013 Parameters: Control system: IGES Maximum tube diameter: 100 mm Maximum bending angle: 200 h Precise bending: 1/10 st Number of axles: 3 pieces Maximum bending length: 6300 mm Tube rotation: 360 pcs Strength: 70 kN Repeatability: 0.1 mm Programmable speed Compatible with systems: Windows. Novell and Linux Process Planning Software 3D bends Tools for bending pipes with a diameter of 76 and 70 mm

Bending tool, die, upper blade, upper tool, straightening tool -Tool for: Press brake -divided -Tool: 60° -Dimensions: 203 x 45 mm -Total length: 1800 mm -Lengths: 900/900 mm -Weight: 82 kg

Bending tool, die, upper blade, upper tool, deer foot tool, deer foot tool for press brake -Tool for: Press brake -divided -Tool: 82° -Dimensions: 170 x 60 mm -Total length: 2540 mm -Lengths: 20/40/80/160/320/640/1280 mm -Weight: 88 kg

Inv. Num. : 3168 Type: SE 80.3 Producer: RASI Created: 2003 Parameters: Minimum tube diameter: 4 mm Maximum tube diameter: 82 x 2.6 mm Minimum bending radius: 34 mm Maximum bending radius: 228 mm Maximum bending angle: 195 h Total power requirement: 11 kW Maximum bending length: 3-6 m Maximum resistance torque: 12.7 cm³ Operating voltage: 400 V Control voltage: 24 V Feed speed: 0-60 m/min Machine height: 1200 mm Machine length: 7000 mm Machine width: 1300 mm Equipment: Bending tools

Bending tool, die, upper blade, upper tool, straightening tool -Tool: for press brake -Tool: 88° -Edge length: 100 mm -Overall height: 149 mm -Weight: 3 kg

- Round tube steel DM 6 – 42 x 5 mm - Round tube stainless steel DM 6 – 42 x 3 mm - Pipe push-on length max. 6,000 mm - Programmable logic controller up to 20 angles - Digital display of longitudinal displacement - Digital display of torsion - Programmable, anticipatory mandrel retraction - Mandrel lubrication system by hand pump - Wrinkle smoother receptacle - Bending speed max. 13°/sec - Bending angle up to 180° + 10° deflection - Manual feed - Manual twisting - Right bending direction - Radii from 1.5 D - Incl. bending tool : - DM 12 mm - radius 36 mm ) / DM 15 mm - radius 37.5 mm - DM 18 mm - radius 36 mm - DM 22 mm, radius 44 mm with mandrel - DM 42 mm, radius 44 mm with mandrel

We offer directly on behalf of the owner : Bending press, second-hand Make : Graebener Maschinentechnik (Gräbener) Type : GRNM Year of construction : 2005 Flexural force max.: 16.000 kN ( 1.600 t ) Tool length : 1,600 mm Data at 520 N/mm2 Pipe diameter max.: 1,524 mm Tube diameter min.: 457 mm Sheet thickness max.: 40 mm Max. pipe length: 13.2 m Pipe length min.: 6m Pipe weight max.: 25 t Total power requirement approx.: 245 kW / 400 V / 50 Hz Approx. space: 27 x 3 m Total weight approx.: 90t / basic machine approx. 65t Further technical data and details on request or see data sheets in photos / PDF The machine was built in 2005, worked until 2021 and was professionally dismantled and packed for transport.

CNC – controlled profile and tube bending machine for demanding and precise bending work with hollow sections and tubes. With our machines, aluminium – steel / stainless steel – various plastics such as PVC window profiles (depending on the application) can be bent with repeatable accuracy, regardless of the material. Depending on the equipment, our machines can also be used for three-dimensional bending work. Our REPANDUS models can work both horizontally and vertically. The models of the REPANDUS series work with a fixed upper roller and two movable lower rollers – this means that the straight end piece is relatively short compared to machine concepts with fixed lower rollers. The machine body is made of vibration-absorbing cast steel Shaft diameter of upper and lower rollers Ø 70 mm Shafts made of special steel – hardened and ground Bending force 190 kN Maximu ...

CNC – controlled profile and tube bending machine for demanding and precise bending work with hollow sections and tubes. With our machines, aluminium – steel / stainless steel – various plastics such as PVC window profiles (depending on the application) can be bent with repeatable accuracy, regardless of the material. Depending on the equipment, our machines can also be used for three-dimensional bending work. Our REPANDUS models can work both horizontally and vertically. The models of the REPANDUS series work with a fixed upper roller and two movable lower rollers – this means that the straight end piece is relatively short compared to machine concepts with fixed lower rollers. The machine body is made of vibration-absorbing cast steel Shaft diameter of upper and lower rollers Ø 70 mm Shafts made of special steel – hardened and ground Bending force 190 kN Maximu ...

Offer 24126 Specifications: - Bending process mot. with automatic or manual operation - Bending capacity square bar ST 37 up to approx. 30 mm - Bending capacity flat bar ST 37 up to approx. 30 x 8 mm - Bending length between the twisting units adjustable up to approx. 1200 mm - Min. twist length 10 x material thickness ( long side ) - Bending time preselection / bending length twist preselection - Right – counterclockwise -Tailstock - Elbow + ring bending device GRB 66 with various roller sets - Bending performance - flat steel 60x10 mm high, R 700 mm - Flat steel 70x12 mm flat R 500 mm - Round tube 1 1/2" x 2 R 800 mm - Square tube 40x40x3 R 1500 mm - Angle 45x6 R 600 mm - Round tube roll sets steel 1 1/4" , plastic 1 1/2" - Standard roller set - Space requirement approx. W 1850 x H 1300 x D 700 mm - Drive 400 V / 2.2 kW ...

Motorized Rounding Machine Foot Holder one. Rear angle infeed Emergency stop leash very good condition Colour: grey Total power requirement 16 A Shaft diameter: 65 mm Capacity: 1020x1.5 mm Weight: 300 kg Machine number: 05 125 001 Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out.

Specifications: - Max. working length 4050 mm - Column passage 3050 mm - Max. pressing force 110 t - Plunger stroke 200 mm - Projection 350 mm - Table height 900 mm - Opening width 400 mm - Drive power 17.5 kW - Space requirement approx. W 4250 x H 2850 x D 2200 mm - Weight approx. 15.0 t -with: - Control CYBELEC ModEva 10 S renewed in 2011 - Y 1+ 2 , X , Z - Two-hand control panel: -Mot. Back gauge 5 - 1000 mm - Front support arms - Split sharpening tool, - Universal die

Bending tool, die, upper knife, upper tool, upper beam -Tool: for folding machine -Dimensions: 60 x 15 mm -Length: 1020 mm -Weight: 6 kg

Key data: 220 t, 4000 mm

with CNC-controlled crowning LazerSafe Safety system Foot pedal with standard tool set Machine in little-used condition Colour: turquoise/grey Total power requirement:f 15 kW Projection: 400 mm Stand width: 3150 mm Drive power: 400 V Back gauge: 625 mm Flow speed: 130 mm/sec Working speed: 8 mm/sec Retraction speed: 85 mm/sec Stroke length min./max:. 260 mm R-axis 150 mm Dimensions: 5100 x 1920 x 3080 mm Weight: 12250 kg Machine Number:M00000948 LZ: approx. 8 - 10 weeks, machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out.

Key data: 2000 mm, 1 mm, 2000 mm

Electric bending machine Schechtl 2000x1.25mm with 6-way control, in good condition. The machine can be loaded with a forklift. You will receive a proper invoice with VAT, price net 6900.-. Shipping possible throughout Europe. Please call us or send us a wading app.

Key data: 200 mm, 1 mm, 200 mm

Sell here an electric Schechtll bending bench with 6-way control and a matching 2m hand-held guillotine shears. Price net, you will receive an invoice with VAT.

Bending tool, die, lower knife, lower tool, lower beam, -Tool: for folding machine -Widening: for lower cheek -Dimensions: 33/76/3040 mm -Bore distance: 280 mm -Hole diameter: 18 mm -Length: 3040 mm -Weight: 33 kg

Bending tool, die, bottom knife, bottom tool, prism tool, beading tool -Tool: for press brake -Prism width: 16 mm -Tool: shared -Tool: is guided -Tool intermediate dimensions: 1430 mm -Transport dimensions: 1550/200/H235 mm -Weight: 250kg

Offer 24361 Specifications: - 3 single mot. Driven rollers manual + controlled operation - Max. torque per roller 1600 Nm - Stroke of the bending roller X – axis approx. 265 mm - Lower rollers laterally adjustable 200 - 1000 mm - Shaft diameter 105 mm - Roller diameter up to approx. 260 mm - Useful length of the standard shafts approx. 300 mm - Shaft rotation infinitely variable 1 - 22 rpm - Bending performance e.g. - Round tube 1" Ø 350 mm - Round tube 4" Ø 2000 mm - Flat bar 300 x 15 Ø 600 mm - Castors - Drive 400 V / 3 x 1.1 kW - Hydr. Drive 400 V / 3 kW - Weight approx. 1200 kg - Weight of accessories approx. Medical history - Space requirement approx. W 1250 x H 1400 x D 1700 mm - with: - Control PC 100 in sep. Control panel - Lateral straightening rollers horizontally + vertically adjustable - Standard bendin ...

used, technically overhauled reinforcing steel bending machine. Rotations of the bending disc 8/16 rpm. Connection 16 A Single bending max. 1 piece of reinforcing steel 38mm D., 2 pieces of reinforcing steel 28mm D. Standard bending tool 2 pieces of foot switch with emergency stop function.

Brand Lisec Type BSV-45 Fashion model Frame Bending Machine Chassis number 154.11.10.10.0792 Construction year 1992

PROFI PH 50-3H / 3-roll round bending machine If you want to bend profile or tube material, the Profi Bend is the best choice! With this profile bending machine, you can bend a wide variety of profiles into almost any desired radius. Made in Europe. Shaft diameter: 50 mm Roller diameter: 150 mm Shaft revolutions: 10 rpm Connected load: 400 V / 50 Hz Drive motor: 1.5 kW Feed distance: 120 mm Weight: 355 kg Dimensions: 1100x800x1400 mm Delivery & Payment

Used, technically overhauled reinforcing steel bending machine. Rotation of the bending plate 5/7.5/10/15 Power requirement 3.15/3.65 KW 2 footswitches with emergency stop function. Bending capacity max. 1 piece 45mm D. Reinforcing steel or 3 bars 28mm D. The control system is upgraded to Siemens Touch Display CC. Latest standard. 1 set of standard bending tool.

Control Thrust... 80t Bending length ... 2620mm controlled axes ... 4 Plunger stroke... 200mm Machine weight ... 5750kg The machine is in good condition, possible to test under power.

- min/ max bending thickness 10/60 mm - bending width 4500 mm - weight of bending rolls 172 t - dimensions L11,19 x W5,08 x H5,6 m

2000mm 66 ton Y1 Y2 R1 Z1 Z2 X1 X2 Excellent condition With tooling

Inv. Num. : 7914 Type: PBM 7074 Producer: WEGENER Created: 2015 Parameters: Control system: Siemens Maximum bending angle: 90

Max. pressing force: 200 kN Max. tool height: 100 mm Manual and automatic mode possible With Siemens program control Operating instructions

Key data: 1000 mm, 1 mm

with rebate groove and wire insertion grooves Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out. Sheet width: 1000 mm Sheet thickness: 1.0 mm . Colour: blue Machine weight: 45 kg Space requirement: 1200 x 400 x 1000 mm Shaft diameter: 50 mm

Bending tool, die, upper blade, upper tool -Tool: for press brake, 4-piece set -Tool: 90° -Dimensions: 98 x 27 mm -Dimensions: see drawing in the photos -Total length: 1977 mm -Lengths: 2x 1015/ 1x 545 / 1x 417 mm -Transport dimensions: 1015/200/H55 mm -Weight: 42.6 kg

Width of plate,mm 3000 Thickness of plate,mm 66-150 Description Hot and cold bending Force: 2200t Main roll: 860mm Changeable roll: 500mm Width: 3000mm Bending by circle arc Cold bending: 66mm Hot bending: 150mm Min diameter of cylinder: 1000mm Bending at the angle Cold bending: 30mm Hot bending: 60mm Internal bending radius: 60m weight: 100t

P4.1812 Servo-controlled panel bender LS Upper bending blade LI Lower Bending blade MLA.ZR Manual length Adjustment of Blankholder CLA Long Tab Bendging Unit HP12015 R81 Chiller Max. length at entrance: 1850mm. Max. width at entrance: 1500mm. Minimum length at entrance: 285mm. Minimum width at entrance: 190mm. Maximum diagonal: 2150mm. Maximum width at exit: 1500mm. Maximum reference dimension: 2000mm. Minimum sheet thickness: S min: 0,50mm. Maximum sheet thickness, Mild Steel (max. 410 N/mm2): Max: 2,00mm Maximum sheet thickness, Stainless steel (max. 600 N/mm2): Max. = 1.25mm Processing of pre-painted material Smax= 3,00mm. Maximum tool length for CLA option: 1000mm.

Used machine in good condition. Available for immediate delivery. - Operating hours: 54.860 - Pressure force: 50 t - Bending length: 1.275 mm - Axes: 6 - Distance between uprights: 1.750 mm - Working speed: 1-10 mm/seg - Throat: 410 mm - Stroke max: 215 mm - Power: installed max: 7,5 kW - Dimensions (long x wide x high): 1.930 x 2.030 x 2.375 mm - Weight: 4.750 kg

Used machine in good condition. Available for immediate delivery.

Used machine in good condition. Available for immediate delivery. - Type: Hybrid - Operating hours: 23.850 - Pressure force: 140 t - Bending length: 3.060 mm - Axes: 6 - Distance between uprights: 2.600 mm - Returning speed: 160 mm/seg - Working speed: 10 mm/seg - Throat: 510 mm - Oil tank capacity: 80 l - Weight: 9.500 kg - Dimensions (long x wide x high): 3.950 x 1.875 x 2.600 mm

Used machine in good condition. Available for immediate delivery. - Operating hours: 34.027 - Control: Siemens Sinumerick 840D NC - Bending length max: 2.500 mm - Length min between the bends: 350 mm - Width min between the bends: 160 mm - Bending height max: 200 mm - Min length sheet: 370 mm - Max length sheet: 2.850 mm - Min sheet width: 180 mm - Max sheet width: 1.500 mm - Bending width max: 1.500 mm - Number of bends per side max: ilimitado / unlimited - Material thickness min: 0,5 mm - Maximum material thickness aluminium: 4 mm - Maximum material thickness steel: 3,2 mm - Maximum material thickness stainless steel: 2 mm - Max panel diagonal: 3.000 mm - Angle tolerance: +/-0?25 C? +- - Bending angle: -135? ... +135? C? - Bending tolerance: +/-0,15 mm +- - External bending radius min: 1,5/2 x espesor chapa / sheet width mm

Used machine in good condition. Available for immediate delivery. - Operating hours: 16.304 - Pressure force: 150 t - Bending length: 3.100 mm - Axes: Y1, Y2, X, R, Z1 & Z2 - Distance between uprights: 2.750 mm - Working speed: 10 mm/seg - Returning speed: 150 mm/seg - Locking speed: 150 mm/seg - Throat: 315 mm - Stroke max: 215 mm - Power: installed max: 11 + 15 kW - Weight: 9.800 kg - Dimensions (long x wide x high): 3.910 x 1.900 x 2.660 mm