134,613 used machines on RESALE, but how to find them? Machine Search
APV plate heat exchanger with 2 Cofies filters, several Pentair valves, Inoxpa and Alfa Laval centrifugal pumps, dimensions: 4000 mm x 800 mm x 2000 mm.
Tetra Pak plate heat exchanger with Endress+Hauser flowmeter, type heat exchanger: C10-KSM, serial number: 30107-33239, year of construction: 2011, volume: 993 litres, dimensions: 3850 mm x 700 mm x 2150 mm.
DSI Freezing Solutions A/S plate freezer, type: V3 Co2 20/100, number: 3068, year of construction: 03/2012, Grp: 1, fluid: Co2, volume: 96 L, TS: -60°C to + 40°C, PT: 80 bar, PS: 55 bar, clearance: (60x) 350 mm x 100 mm x 470 mm, total dimensions: 3100 mm x 1650 mm x 1300 mm.
Welding table, straightening table, straightening pad, work table, clamping table marking plate, spotting plate, levelling plate PAGUS work surface: 490 x 400 mm height: 84 mm Dimensions: 490 x 400 x 84 mm
Baking Plates for EWA Baking Machine for Molded Cones - Condition: used - Wafer Length: approx. 130 mm - Wafer Diameter: approx. 30 mm
DSI Freezing Solutions A/S plate freezer, type: V3 Co2 20/100, number: 3067, year of construction: 03/2012, Grp: 1, fluid: Co2, volume: 96 L, TS: -60°C to + 40°C, PT: 80 bar, PS: 55 bar, clearance: (60x) 350 mm x 100 mm x 470 mm, total dimensions: 3100 mm x 1650 mm x 1300 mm.
DSI Freezing Solutions A/S plate freezer, type: V3 Co2 20/100, number: 3063, year of construction: 03/2012, Grp: 1, fluid: Co2, volume: 96 L, TS: -60°C to + 40°C, PT: 80 bar, PS: 55 bar, clearance: (60x) 350 mm x 100 mm x 470 mm, total dimensions: 3100 mm x 1650 mm x 1300 mm.
DSI Freezing Solutions A/S plate freezer, type: V3 Co2 20/100, number: 3066, year of construction: 03/2012, Grp: 1, fluid: Co2, volume: 96 L, TS: -60°C to + 40°C, PT: 80 bar, PS: 55 bar, clearance: (60x) 350 mm x 100 mm x 470 mm, total dimensions: 3100 mm x 1650 mm x 1300 mm.
Face plate PAGUS Outer Ø: 400 mm Bolt circle: 135 mm Bore Ø: 100 mm Height with jaws: 140 mm Flange: 175 mm Overall height: 190 mm Short cone used, tested ! Dimensions: 400 x 200 mm
surface area: div. / 25025045 / 1251 mm Shipping weight: ? ca. 1500 kg Packing: ca. 1,20,80,6 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
DSI Freezing Solutions A/S plate freezer, type: V3 Co2 20/100, number: 3064, year of construction: 03/2012, Grp: 1, fluid: Co2, volume: 96 L, TS: -60°C to + 40°C, PT: 80 bar, PS: 55 bar, clearance: (60x) 350 mm x 100 mm x 470 mm, total dimensions: 3100 mm x 1650 mm x 1300 mm.
DSI Freezing Solutions A/S plate freezer, type: V3 Co2 20/100, number: 5862, year of construction: 12/2021, Grp: 2, fluid: Co2, volume: 96 L, TS: -60°C to + 48°C, PT: 80 bar, PS:-5/55 bar, clearance: (60x) 350 mm x 100 mm x 470 mm, total dimensions: 3100 mm x 1650 mm x 1300 mm.
DSI Freezing Solutions A/S plate freezer, type: V3 Co2 20/100, number: 5864, year of construction: 12/2021, Grp: 2, fluid: Co2, volume: 96 L, TS: -60°C to + 48°C, PT: 80 bar, PS:-5/55 bar, clearance: (60x) 350 mm x 100 mm x 470 mm, total dimensions: 3100 mm x 1650 mm x 1300 mm.
Face plate PAGUS outer Ø: 360 mm bore center Ø: 20 mm threaded flange: Ø 250 mm bolt circle inside: Ø 135 mm bolt circle outside: Ø 225 mm bore M8 / M12 and 4 x Ø 12 mm Thickness with flange: 55 mm Dimensions: 360 x 360 x 55 mm
used
floor-plate length: 3000 mm floor-plate width: 2250 mm floor-plate height: 260 mm T-slot - distance: 250 mm T-slot - width: 28/47 mm T-slots: 9 Table: Kante 930 steel shelf feet: 4 The technical data is manufacturer or operator information and is therefore not binding for us. We reserve the right to sell the goods prior to sale, our terms and conditions of business and sale apply exclusively. About us more than 400 of our own machines in stock over 12,000 m² of storage space, crane capacity 70 t more than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. You can find further offers on our website. Viewings are possible by arrangement. We look forward to your visit. Your Markus Hirsch team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
DSI Freezing Solutions A/S plate freezer, type: V3 Co2 20/100, number: 5863, year of construction: 12/2021, Grp: 2, fluid: Co2, volume: 96 L, TS: -60°C to + 48°C, PT: 80 bar, PS:-5/55 bar, clearance: (60x) 350 mm x 100 mm x 470 mm, total dimensions: 3100 mm x 1650 mm x 1300 mm.
DSI Freezing Solutions A/S plate freezer, type: V3 Co2 20/100, number: 5865, year of construction: 12/2021, Grp: 2, fluid: Co2, volume: 96 L, TS: -60°C to + 48°C, PT: 80 bar, PS:-5/55 bar, clearance: (60x) 350 mm x 100 mm x 470 mm, total dimensions: 3100 mm x 1650 mm x 1300 mm.
DSI Freezing Solutions A/S plate freezer, type: V3 Co2 20/100, number: 3065, year of construction: 03/2012, Grp: 1, fluid: Co2, volume: 96 L, TS: -60°C to + 40°C, PT: 80 bar, PS: 55 bar, clearance: (60x) 350 mm x 100 mm x 470 mm, total dimensions: 3100 mm x 1650 mm x 1300 mm.
Face plate PAGUS Outer Ø: 305 mm Bolt circle Ø : 280 mm Bolt circle flange Ø : 52 / 135 mm Bore Ø: 25 mm Thickness: 38 mm Grooves: 10 / 18 mm can be combined with WZ239 ! Dimensions: 305 x 305 x 38 mm
Lastra SM 65 development machine Online Plate Developing Machine for Thermal Metal Plates 65 cm inlet width, incl. cooler cleaned & tested Year of construction 2002 Art.Nr. L986
Welding Table, Straightening Table, Straightening Plate, Work Table, Clamping Table Straightening Plate, Spotting Plate PAGUS Work Surface: 410 x 410 mm Height: 105 mm Heavy Duty Version Dimensions: 410 x 410 x 105 mm
length: 5000 mm width: 1150 mm depth: 2000 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m There are 2 brackets. The dimensions refer to 1 angle. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About usMore than 400 of our own machines in the warehouseMore than 12,000 m² of storage space, crane capacity 70 tMore than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company,then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
FIAT TRATTORI 1380 DT | 135 hp | H-Kennzeichen | Restored Powerful all-wheel drive classic car with BAAS front loader, extensive restoration and valid technical inspection until 12/2026. Highlights ✔ 99 kW (135 hp) / 5,461 cc 6-cylinder turbodiesel ✔ Year of manufacture 1981 | H license plate ✔ Technical inspection until 12/2026 without recognizable defects ✔ BAAS Prima 380 F/40 Front Loader with Joystick ✔ Air Brake System (WABCO) ✔ 2 double-acting hydraulic control units (4 connections) ✔ Front and rear wheel weights ✔ 2 additional tanks of approx. 60 litres each ✔ Mitas tyres 420/85 R28 front & 520/85 R38 rear Restoration / Investments ✔ Completely primed and repainted ✔ Cabin fully restored inside ✔ Electrics partially renewed ✔ Front axle revised ✔ Right lifting cylinder renewed ✔ New battery (approx. 3 ...
Face Plate ROTO RECORD PL 315x6 TGL 30-22313 Outer Ø: 315 mm Bolt Circle Ø : 133.5 mm Bore Ø: 100 mm n max: 710 rpm New ! preserved ! Dimensions: 315 x 315 x 125 mm
- Number of sections: 1 - Capacity: 1000 l/h - Connection: Clamp 50.5 mm - In good condition
size of pallet:400x400 mm numbers of pallets:15 table load:400 kg weight of the machine ca.:0,060 t dimensions of the machine ca.:0,4 x 0,4 m 15 pallets for Makino A 55, size 400 x 400 with T-slots for sale
Welding table, straightening table, straightening plate, work table, clamping table straightening plate, leveling table,spotting plate PAGUS work surface: 800 x 630 mm height: 170 mm used, tested ! Dimensions: 800 x 630 mm x 170 mm
TECHNICAL SPECIFICATION:. - Fixed table length:12000 mm - . width:3000 mm - . height:350 mm - number of T-slots:10 - distance between T-slots:300 mm Technical description : FLOOR PLATES consisting of 4 (four pieces) at segments of 6000mm length and 1500mm width
length:1000 mm width:800 mm weight of the machine ca.:0,7 t dimensions of the machine ca.:1,0 x 0,8 x 1,4 m Hardstone measuring plate complete with FISCHER tailstocks and 4 leveling elements.
length:1600 mm width:1000 mm plate height:200 mm weight of the machine ca.:1 t dimensions of the machine ca.:1,6 x 1,0 x 1,3 m Hardstone measuring plate with support desk and 2 tailstocks
diameter:400 mm total power requirement:110 V, 125 W weight of the machine ca.:72 kg
sheet width:3050 mm plate thickness:4 mm total power requirement:9 kW weight of the machine ca.:6 t dimensions of the machine ca.:3900 x H 1850 x T 2100 mm
stone measuring plate 400 x 400 x 50 mm ( 3 pieces available / price per piece )
length:600 mm width:500 mm weight of the machine ca.:0,05 t dimensions of the machine ca.:1,5 x 1 x 0,8 m Texte, Bilder, Grafiken, Layout, Strukturen und Algorithmen etc. unterliegen weltweitem Urheberrecht. Unerlaubte Verwendung der Daten, werden sowohl strafrechtlich als auch zivilrechtlich verfolgt. Das ausschließliche Urheber- / Nutzungsrecht dieser Daten wurde nachfolgender Person eingeräumt. Copyright © 2005-2024, Josef Weber. All rights reserved.
floor-plate length:6000 mm floor-plate width:2000 mm floor-plate height:460 mm weight of the machine ca.:12,5 t dimensions of the machine ca.:6 x 2 x 0,46 m
floor-plate length:6000 mm floor-plate width:2000 mm floor-plate height:460 mm weight of the machine ca.:12,5 t dimensions of the machine ca.:6 x 2 x 0,46 m
table length:2000 mm table width:600 mm table height:300 mm mounting surface:700 x 600 mm centre distance:1200 mm centre height:160 mm Dimensions (WxDxH):2,0 x 0,6 x 0,3 m
Plate heat exchangers coated with tensioning device made of steel and plate pack of stainless steel
Plate heat exchanger with steel clamping device
Plate heat exchangers coated with tensioning device made of steel and plate pack of stainless steel
Plate heat exchangers coated with tensioning device made of steel and plate pack of stainless steel
Plate heat exchangers coated with tensioning device made of steel and plate pack of stainless steel
Plate heat exchanger with marine grade steel clamping device and titanium plate pack.
Baking Plates for PRO 1 Baking Machine - Condition: used - Engraving (Lower Baking Plate): approx. 5 x 5 mm - Engraving Depth (Lower Baking Plate): approx. 1,45 mm - Wafer Sheet Thickness: approx. 3 mm - Connecting Shaft: approx. Ø 16 mm - Collar radius: approx. 96,5 mm
Hot plate press (electric) Brand: ORMA Type: NPC 6/120 new machine Technical data: Heating plates: 3500x1300mm Cylinder: 6 pieces Press force: 120t Stroke/opening dimension: 450mm Connection value: 28.8kW (ELKOM plates) Options: - Intermediate plate - Anodized surface for ELKOM panels - Parallelism sensor á 1,000.00 EUR - Pressing mechanism from above (fixed lower plate) - Max. temperature till 150°C - Max. temperature till 200°C - 4-sided loading possible - Mylar protective film - Fiberglass Teflon protection - Hardware for Industry 4.0
Vacuum lifter, vacuum lifter from Schmalz for heavy plates with new suction rubber Load capacity 150kg horizontally and vertically Vacuum cleaner can be swivelled 90 degrees motorised Suction box 1000 x 675mm Acoustic warning signal in case of too low vacuum 400V, 1.5kW Can be attached to on-site chain hoist CE mark No test book available Vacuum cleaner rubber renewed Mint condition The machine can be demonstrated on site by appointment. We offer only machines that are ready for demonstration in our warehouse, see "other offers of this year". provider".
- Filter surface area: 3m2 - Evacuation: manual Equipment : - Control window with inlet and outlet lighting - Circulation pump - Adjustable dosing pump - Agitator - Connection: butterfly valves, Friedrich n°2 40 Dimensions : - Length: 1750 mm - Width: 700 mm - Height: 1000 mm - In working order
maximum number of results exceeded
please refine your search
2.000 € 
