plate bending roll used for sale

tube diameter: 48 mm bending radius max.: 90 ° total power requirement: 1,5 kW weight of the machine ca.: 0,5 t dimensions of the machine ca.: 1,8 x 0,8 x 1,2 m Electro-hydraulic mandrel tube bending machine with - four-position bending angle pre-selection - bending tools: 48.3, 42.4, 33.7, 1/2 - mandrel length: 4500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

GASPARINI electronic folding machine mod. PSG-250/5000 FP FEATURES Axes: R – X – Y1 – Y2 , Z1 , Z2 Folding length: 5,100 mm Pitch between uprights: 4,555 mm Strength: 250 tons. Gooseneck: 465 mm Slide travel: 250 mm Distance between table-slide: 450 mm Control unit: delem Weight: 25,500 kg. Overall dimensions: 6500 x 2300 x 3200 mm Year of manufacture: 2004 Year rebuilt: 2021 CE compliant. PROMECAN pneumatic tie-down. Self-centered lower table with pneumatic tie-down. 1,000 mm motorized backgauge ("X" axle) Height adjustment "R" axis 250 mm. CNC DELEM DA 66W. 4 adjustable motorized turrets Z1, Z2. Folded penetration (axis "Y1, Y2") Low voltage electric pedal operation. Emergency stoppages. Hydrodynamic anti-bending table by hydraulic pumping. Side protections. Level IV safety laser.

sheet width: 3100 mm plate thickness: 9 mm pre-bending: 6 mm diameter of upper rolls: 220 mm diameter of lower rolls: 200 mm side roll diameter: 170 mm min. dia.: 250 mm roll speed: 6 m/min total power requirement: 10,3 kW weight of the machine ca.: 4651 kg dimensions of the machine ca.: 4915 x 1120 x 1235 mm Features - Machines include the following DAVI standard specification: The components of the machine structure (machine stand, frame and swivel bearings, etc.) have been calculated and designed to withstand the loads required for the applications and performance levels. The robust and heavy-duty machine construction absorbs the loads generated during the bending process without transferring them to the foundation. - High-quality surface finish: For forming delicate surfaces and/or soft materials without leaving marks Hydraulic-mechanical parallelism system, supported by electronics  ...

tube diameter: 50 mm bending angle max. +/-: 180 ° bending radius max.: 350 mm bending speed: 3 U/min motor speeds:: 2815 U/min bending radius max.: 350 mm bending angle max. +/-: 180 ° tool taper: Sechskant 40 mm total power requirement: 2,2 kW weight of the machine ca.: 0,1 t Machine Type Electric Bending Machine Model 6000-S Power Connection 3-phase 400 V Control System JUTEC electronic, programmable bending control with display and membrane keypad Operation Foot switch for clockwise/counterclockwise rotation and bending operation Design Mobile machine on swivel casters The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tube diameter: ca. 60 mm tool taper: Sechskant 40 mm bending device: horizontal bending speed: 3 U/min weight of the machine ca.: 120 kg total power requirement: 2,2 kW Electronic bend angle control Digital display and keypad Operated via dual foot switches Mandrel-less bending Mobile machine base Pipe diameter range likely up to Ø 60 mm Tool mounting via hexagonal shank The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2026 : 080248 : November 2026, Zwischenve : Türkei : 92932 € : 1756.41 € : 175 to : 3050 mm : Y1 / Y2 / X und R-Achse : 265 mm : 2600 mm : 450 mm : 530 mm : hydraulisch : 160 mm/s : 10 mm/s : 100 mm/s : 650 mm : 500 mm/s : 350 mm/s : 250 mm : 900 mm : 104 mm : 250 l : 18.5 kW : 4250 mm : 1700 mm : 2850 mm : 10900 kg 4axes (Y1, Y2,X and R) Color graphics control Delem DA 66 S - 2D graphical touch screen programming mode - 3D machine representation, in simulation and production - 24", high resolution color TFT - Delem Modusys compatibility (module scalability and adaptivity) - USB, peripheral interfacing - User specific application support within the control&apos,s multitasking environment - Sensor bending &, correction interface - Profile-S2D offline software servo motorized back gauge on linear guides and ball screws back gauge finger blocks on double linear guides CN ...

plate width: 370 mm plate thickness: 3 mm no. of straightening rolls: 12 roll diameter: 62 mm Roller diameter 60 mm Workable strip thickness from 0.6 to 3.00 mm Roller configuration: 2+9+2 tempered and ground Double input and output drive rollers pressed by 2+2 pneumatic cylinders Infeed and outfeed belt guide with 4 self-centering rollers Hydraulic opening of the head for pilot release. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 17850 € : 342.72 € : 1 : 100 to : 1000 mm : 300 mm : 7.5 kW : 2110 mm : 1000 mm : 2275 mm : 1900 kg : 1 : 680 mm : 1020 mm : 5 mm/s : 10 mm/s : 6 mm : 100 mm : 190 mm 2 guidings big upper tool holder and table witht-slots upper and lower pressbrake tool manometer rapid down move with automtic changeto working speed piston stops in every position 2 hand panel and foot pedal height adjustable table user manual in Germanand English according to CE rules The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General Description Fully automated robotic press brake bending cell manufactured by AMADA , model ASTRO II 100 NT / HDS 1030 . Designed for automated sheet-metal bending with robotic workpiece loading, positioning, manipulation and unloading. The system combines an AMADA HDS 1030 press brake with the ASTRO 100 NT robotic handling system. Technical Details Manufacturer: AMADA Model: ASTRO II 100 NT / HDS 1030 Machine type: Robotic press brake bending cell Year: 2007 Serial number: 20306066 Press capacity: 100 t / approx. 980 kN Bending length: Approx. 3,000–3,110 mm Distance between uprights: 2,700 mm Stroke: 200 mm Throat depth: 415 mm Control: AMADA AMNC PC / AMNC II generation Robot: Yaskawa Motoman YR-HP20-A63 / ASTRO 100 NT system Robot payload: 20 kg Robot manufacture: November 2007 Automatic workpiece loading and handling Automatic multi-stage bending Automa ...

Key data: 130 t, 3000 mm

Sell a well-preserved CNC Hydraulic Press Brake from Trumpf Model V130. The dimensions of the machine are LxWxH 1900mm x 3800mm x 2950mm. The weight is about 13000kg. The edge length is 3000mm. Incl. a set of tools. If you have any further questions, please contact us. The machine can be viewed under power by prior appointment. The sale is without guarantee and warranty. Returns are excluded. All information without guarantee.

Stock No.: 4040 PROFILE BENDING MACHINE Manufacturer: ROUNDO, Type: R5 Serial No.: -, Year of manufacture: 1974 Specifications: Upper roller 360 mm Ø Lower roller 360 mm Ø Flat steel 250 x 30 mm Frame steel upright 100 + 140 x 30 dia. 1000 mm Angle steel 120 x 12 mm U-steel UNP 20 mm Load by steel 40 Kg/mm2 48 cm3 Total performance 7.5 Hydraulic.                          Dimensions: Length: 1700 mm, Height: 1200 mm, Width: 1500 mm, Weight: 3800 kg

JUTEC 3000 Bending Machine -Year of construction 2021 -CE marking -Footswitch Dimensions: LxWxH 0.7x0.5x1.3 meters / Weight 200Kg

: neu : ca. 2 Wochen ab Auftragse : Türkei : 153986 € : 1867.32 € : 98800 € : 320 to : 3050 mm : 365 mm : 2600 mm : 750 mm : 630 mm : hydraulisch : 160 mm/s : 10 mm/s : 140 mm/s : 500 mm/s : 350 mm/s : 37 kW SPECIAL PRICE FOR STOCK MACHINE EXW TÜRKIYE Tandem preparation Projection 750 mm Light barrier for single or later tandam operation 6 axis back gauge X1, X2, R1, R2, Z1, Z2 CNC CONTROL SKY 22 - intuitive touch-screen control (simple drawing of the bending outline with your finger) 21,5 in full HD - with 2D and 3D working screen - direct programming of the bending angle - user friendly programming in dialogue form optionally in 2D or 3D mode - 2D and 3D simulation of the bending sequence - automatic tool selection in 3D mode - automatic calculation of the blank sheet size - bending order calculation - graphic product and tool memory - correction possibility - USB and Ethernet  ...

sheet width: 3200 mm plate thickness: 4.0 mm ST distance between columns: 3300 mm upper clamping bar adjustment: 400 mm Adjustment folding beam: 80.0 mm pivoting angle: 180 Grad clamping capacity max.: 200 KN rear stop: 10.0 - 1600 mm oil volume: 160 Liter total power requirement: 9.8 kW weight: 8500 kg range L-W-H: ~ 4900 x 2000 x 2300 mm from a maintenance workshop good / well-maintained condition () - inspected condition - machine video - https://www.youtube.com/watch?v=RY-amZooeX4 Equipment: - robust CNC folding machine - CNC control unit - CYBELEC DNC 80 PP swiveling control panel, front right 2D graphic display for visualization and multi-simulation 2D graphic programming easy operation - CNC motorized backgauge travel range 10.0 - 1,600 mm pneumatic / retractable gauge fingers adjustment speed max. 250 mm/sec. rear sheet support table with brushes - motorized lower beam  ...

\"Bending Resistance Tester MESSMER BÜCHEL Bending Resistance Tester 79-25-00-0002 Year of manufacture: 2018, Inv. no.: 98235\" Auction-ID: A1-50608-128

pressure: 320 t chamfer lenght: 4100 mm distance between columns: 3600 mm column arm: 410 mm ram stroke speed: 140 mm/sec work speed: 10,5 mm/sec return speed: 150 mm/sec work stroke: 375 mm dayligth: 650 mm table height: 900 mm table width: 220 mm oil volume: 400 ltr. voltage: 380 Volt total power requirement: 30.0 kW weight: 21300 kg range L-W-H: 5350 x 2450 x 3150 mm Features: - DELEM DA66T CNC control system - CNC-controlled axes: Y1, Y2, X, R, Z1, and Z2, as well as CNC crowning - FIESSLER AKAS laser safety device in front of the machine (including FPSC) - Rear safety device: light barrier - BOSCH/HOERBIGER hydraulic components - SIEMENS electrical components - 2 front support arms - 1 freely movable dual foot control - Upper and lower tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tube bending machine, Macri Provar, max diam 45 Auction-ID: A1-50595-60

Lg.Nr. 26254 Technical data: - Max. working width 1310 mm - Max. material thickness 2 mm - Bending angle approx. 0 - 135 ° - Upper beam is operated with side hand crank - Max. stroke upper beam 85 mm - Max. adjustment bending beam 80 mm - Bending process is supported by eccentric weight - Space requirement approx. W 2250 x H 1250 x D 450 mm - Weight approx. 620 kg

pressure: 135 t chamfer lenght: 3100 mm distance between columns: 2600 mm column arm: 410 mm ram stroke speed: 200 mm/sec work speed: 10.0 mm/sec return speed: 120 mm/sec work stroke: 275 mm dayligth: 550 mm table height: 900 mm table width: 90.0 mm control: DELEM oil volume: 200 ltr. voltage: 400 Volt total power requirement: 11.0 kW weight: 8650 kg range L-W-H: 4250 x 2050 x 2800 mm Very good condition () Current new price: 75.0000 Euros Special price on request --------------------------------------------------------- POWER BEND PRO electro-hydraulic press brake featuring: Increased daylight opening (installation height) Increased cylinder stroke Increased throat depth --------------------------------------------------------- Equipment: - CNC electro-hydraulic press brake - DELEM CNC control DA 56 - 2D graphics Bending sequence calculation Product/tool library USB interface - ...

sheet width: 2050 mm plate thickness: 10.0 mm ST pre-bending: 8.0 mm ST diameter of upper rolls: ~ 220 mm side roll diameter: ~ 170 mm diameter of lower rolls: ~ 190 mm bending speed: ca. 2.0 + 5.0 m/min Control: ELAP LYNX oil volume: 80.0 Liter voltage: 380 V total power requirement: 5.5 kW weight: 5000 kg range L-W-H: 3500 x 1550 x 1400 mm Current new price incl. accessories: approx. € 90.000 Special price on request Equipment: - Robust electro-hydraulic 4-roll plate bending machine - 4-roll design offers a wide range of bending and rolling capabilities - MG NC control unit ELAP LYNX Operation – control of all rolls and machine axes Digital position display Manual operation via joysticks Movable control panel - Two central rolls driven directly by hydraulic motors - Conical rolling possible via roll tilting - Side roll parallelism maintained via torsion shafts - Pre-bending o ...

: neu : ca. 6-8 Wochen ab Auftrag : Italien : 600 to : 500 mm : 6.000 x 2.550 mm : 700 mm : 18 mm/s : 3 mm/s : 5000 mm : 6000 mm : 3000 mm : 43000 kg : horizontal verschiebbar : 2550 mm : 2200 mm : 4600 mm horizontal movable cylinder hydraulicaly movable stand control by levers as well as control panel according to CE regulations user manual in GERMAN and ENGLISH OPTIONS: Work table, welded to the base frame, with holes on the surface Control panel on the swivel arm (push buttons for press movement, solenoid valves, Siemens CPU) Radio control panel (push buttons for press movement, solenoid valves, Siemens CPU) Siemens control with touchscreen Lifting cylinders in the table (6, 8 or 10 pcs.) No-rotation shaft for the piston 2 speeds for stand movement and cylinder Oil cooler and decompression valve The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6-8 Wochen ab Auftrag : Italien : 500 to : 500 mm : 5.000 x 2.550 mm : 700 mm : 18 mm/s : 3 mm/s : 5000 mm : 5000 mm : 3000 mm : 32000 kg : horizontal verschiebbar : 2550 mm : 1.700 mm : 3.600 mm horizontal movable cylinder hydraulicaly movable stand control by levers as well as control panel according to CE regulations user manual in GERMAN and ENGLISH OPTIONS: Work table, welded to the base frame, with holes on the surface Control panel on the swivel arm (push buttons for press movement, solenoid valves, Siemens CPU) Radio control panel (push buttons for press movement, solenoid valves, Siemens CPU) Siemens control with touchscreen Lifting cylinders in the table (6, 8 or 10 pcs.) No-rotation shaft for the piston 2 speeds for stand movement and cylinder Oil cooler and decompression valve The data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ...

: neu : ca. 4 Monate ab Auftragse : Italien : 258000 € : 400 to : 500 mm : 5.000 x 3.050 mm : 700 mm : 20 mm/s : 2 mm/s : 4500 mm : 5000 mm : 2600 mm : 24000 kg : horizontal verschiebbar : 3050 mm : 2.200 mm : 3.600 mm Horizontal verschiebbarer Zylinder2.200 mm Hydraulisch beweglicher Ständer: 3.600 mm Bedienung über Handhebel sowie Bedienpanel Tisch mit integriertem Zylinder zum anheben des Werkstücks Ausrüstung gemäß CE Vorschriften Betriebsanleitung in DEUTSCH und ENGLISCH (Symbolfoto) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 218000 € : 400 to : 500 mm : 4.000 x 2.550 mm : 700 mm : 20 mm/s : 2 mm/s : 4000 mm : 4000 mm : 2600 mm : 20500 kg : horizontal verschiebbar : 2550 mm : 1.800 mm : 2.900 mm horizontal movable cylinder hydraulicaly movable stand control by levers as well as control panel according to CE regulations user manual in GERMAN and ENGLISH OPTIONS: Work table, welded to the base frame, with holes on the surface Control panel on the swivel arm (push buttons for press movement, solenoid valves, Siemens CPU) Radio control panel (push buttons for press movement, solenoid valves, Siemens CPU) Siemens control with touchscreen Lifting cylinders in the table (6, 8 or 10 pcs.) No-rotation shaft for the piston 2 speeds for stand movement and cylinder Oil cooler and decompression valve The data for this ad was created with ModulMWS - the software solution of  ...

: neu : ca. 4 Monate ab Auftragse : Italien : 190000 € : 3591 € : 300 to : 500 mm : 5.000 x 3.050 mm : 700 mm : 20 mm/s : 2 mm/s : 4000 mm : 5000 mm : 2600 mm : 18000 kg : horizontal verschiebbar : 3050 mm : 2.200 mm : 3.600 mm horizontal movable cylinder hydraulicaly movable stand control by levers as well as control panel according to CE regulations user manual in GERMAN and ENGLISH OPTIONS: Work table, welded to the base frame, with holes on the surface Control panel on the swivel arm (push buttons for press movement, solenoid valves, Siemens CPU) Radio control panel (push buttons for press movement, solenoid valves, Siemens CPU) Siemens control with touchscreen Lifting cylinders in the table (6, 8 or 10 pcs.) No-rotation shaft for the piston 2 speeds for stand movement and cylinder Oil cooler and decompression valve The data for this ad was created with ModulMWS - the software s ...

: neu : ca. 4 Monate ab Auftragse : Italien : 135000 € : 2551.5 € : 300 to : 500 mm : 3.000 x 2.050 mm : 700 mm : 20 mm/s : 2 mm/s : 3100 mm : 3000 mm : 2600 mm : 11500 kg : horizontal verschiebbar : 2050 mm : 1300 mm : 2000 mm horizontal movable cylinder hydraulicaly movable stand control by levers as well as control panel according to CE regulations user manual in GERMAN and ENGLISH OPTIONS: Work table, welded to the base frame, with holes on the surface Control panel on the swivel arm (push buttons for press movement, solenoid valves, Siemens CPU) Radio control panel (push buttons for press movement, solenoid valves, Siemens CPU) Siemens control with touchscreen Lifting cylinders in the table (6, 8 or 10 pcs.) No-rotation shaft for the piston 2 speeds for stand movement and cylinder Oil cooler and decompression valve The data for this ad was created with ModulMWS - the software s ...

: neu : ca. 4 Monate ab Auftragse : Italien : 107000 € : 2022.3 € : 200 to : 500 mm : 3.000 x 2.550 mm : 800 mm : 20 mm/s : 2 mm/s : 3550 mm : 3000 mm : 2600 mm : 8500 kg : horizontal verschiebbar : 2550 mm : 1900 mm : 2000 mm horizontal movable cylinder hydraulicaly movable stand control by levers as well as control panel according to CE regulations user manual in GERMAN and ENGLISH OPTIONS: Work table, welded to the base frame, with holes on the surface Control panel on the swivel arm (push buttons for press movement, solenoid valves, Siemens CPU) Radio control panel (push buttons for press movement, solenoid valves, Siemens CPU) Siemens control with touchscreen Lifting cylinders in the table (6, 8 or 10 pcs.) No-rotation shaft for the piston 2 speeds for stand movement and cylinder Oil cooler and decompression valve The data for this ad was created with ModulMWS - the software so ...

: neu : ca. 4 Monate ab Auftragse : Italien : 80000 € : 1512 € : 200 to : 500 mm : 2.000 x 1.550 mm : 800 mm : 20 mm/s : 2 mm/s : 2400 mm : 2000 mm : 2600 mm : 4800 kg : horizontal verschiebbar : 1550 mm : 1000 mm : 1300 mm horizontal movable cylinder hydraulicaly movable stand control by levers as well as control panel according to CE regulations user manual in GERMAN and ENGLISH OPTIONS: Work table, welded to the base frame, with holes on the surface Control panel on the swivel arm (push buttons for press movement, solenoid valves, Siemens CPU) Radio control panel (push buttons for press movement, solenoid valves, Siemens CPU) Siemens control with touchscreen Lifting cylinders in the table (6, 8 or 10 pcs.) No-rotation shaft for the piston 2 speeds for stand movement and cylinder Oil cooler and decompression valve The data for this ad was created with ModulMWS - the software solut ...

: neu : ca. 4 Monate ab Auftragse : Italien : 66700 € : 1260.63 € : 150 to : 500 mm : 1.550 x 2.000 mm : 800 mm : 20 mm/s : 3 mm/s : 2350 mm : 2000 mm : 2500 mm : 4100 kg : horizontal verschiebbar : 1550 mm : 1000 mm : 1300 mm horizontal movable cylinder hydraulicaly movable stand control by levers as well as control panel according to CE regulations user manual in GERMAN and ENGLISH OPTIONS: Work table, welded to the base frame, with holes on the surface Control panel on the swivel arm (push buttons for press movement, solenoid valves, Siemens CPU) Radio control panel (push buttons for press movement, solenoid valves, Siemens CPU) Siemens control with touchscreen Lifting cylinders in the table (6, 8 or 10 pcs.) No-rotation shaft for the piston 2 speeds for stand movement and cylinder Oil cooler and decompression valve The data for this ad was created with ModulMWS - the software so ...

: neu : ca. 4 Monate ab Auftragse : Italien : 22900 € : 439.68 € : 40 to : 500 mm : 700x500 mm : 600 mm : 26 mm/s : 9 mm/s : 4 kW : 1400 mm : 900 mm : 2200 mm : 1300 kg 2 speeds adjustable max. pressure manomete The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 25000 € : 480 € : 70 to : 500 mm : 700x500 mm : 600 mm : 25 mm/s : 5 mm/s : 4 kW : 1400 mm : 900 mm : 2250 mm : 1900 kg 2 speeds adjustable max. pressure manomete The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 31400 € : 599.74 € : 100 to : 500 mm : 800x600 mm : 615 mm : 26 mm/s : 4 mm/s : 4 kW : 1600 mm : 900 mm : 2300 mm : 3100 kg 2 speeds adjustable max. pressure manomete The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 43200 € : 825.12 € : 150 to : 500 mm : 800x600 mm : 630 mm : 22 mm/s : 3 mm/s : 4 kW : 1800 mm : 1200 mm : 2400 mm : 4500 kg 2 speeds adjustable max. pressure manomete The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 55200 € : 1043.28 € : 200 to : 500 mm : 1000x600 mm : 640 mm : 21 mm/s : 2 mm/s : 5.5 kW : 1800 mm : 1300 mm : 2500 mm : 6400 kg 2 speeds adjustable max. pressure manomete The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Foot pedal, interchangeable jigs, spacing between jigs adjustable Auction-ID: A1-50476-124

Offer 26338 Technical data: - max. Working length 3340 mm - Column passage 2600 mm - Max. pressing force 100 t - Projection 400 mm - Max. stroke 100 mm - max. Installation height 370 mm - Table height approx. 960 mm - Feed speed / rapid traverse 85 mm/s - Press speed 10 mm/s - Retraction speed 80 mm/s - Drive power 9.5 kW - Space requirement approx. W 3500 x H 2350 x D 1950 mm - Weight approx. 6.8 t - with: - CNC control DELEM DA 58 - Back gauge 0 - 600 mm

Used rotor straightener without bending device Manufacturer: Progress Type: MSR 20/6 Year of Make: 2015 For diameter: 8,10,12,14,16,20mm Used rotor straightening machine without bending device Manufacturer: Progress Type: MSR 20/6 Year of manufacture: 2015 For diameters: 8, 10, 12, 14, 16, 20 mm

Used hot-melt edge banding machine (edge bander), marked \"ΠΑΝΞΥΛ\" (Panxyl) in the seller's listing. Condition: - Used machine - Has not been operated for years; needs inspection before use Auction-ID: A7-50988-156

Complete with tools. In working order. The machine has a brewing length of approximately 3,600 mm and a pressing force of 250 tonnes. Thanks to the CNC control, various bending programs can be precisely set and repeated. Technical data: - Brand: ERMAK - Type: CNC HAP 3600 x 250 - Year of construction: 2008 - Machine: Hydraulic CNC Bending Machine - Brewing length: approx. 3,600 mm - Press force: approx. 250 tons - CNC control - Hydraulic drive - Suitable for bending metal sheets - Including tools and accessories, as visible in the photos The machine is offered in used condition and as shown in the photos. Any dismantling, loading and transport are entirely at the expense of the buyer. Auction-ID: A3-46137-6218

Lg.Nr. 25514 Defective Hydr. CNC - Press Brake Technical data: - Max. working length 3060 mm - Column passage 2690 mm - Max. pressing force 1300 kN - Max. distance table / plunger 370 mm - Stand projection 410 mm - Plunger stroke 215 mm - Lifting speeds - Downward speed idle max. 200 mm/sec - Upward speed 135 mm/sec - Downward pressing speed 1 to 11 mm/sec - Total drive power 18 kW - Pneumatic connection 6 bar - Space requirement approx. W 3800 x H 2400 x D 2400 mm - Weight approx. 11500 kg - with: - With 6-axis CNC control DELEM - Two-hand control panel with foot switch - crowning device - Controlled backgauge with height adjustment 5 - 860 mm - Hydr. Upper + Lower - Tool Clamping - Die table displacement pneumatically supported - Machine does not drive reverence because 2 axles right in the back gauge are without function, contr ...

Hydraulic version Includes pallet with spare parts. Auction-ID: A1-47366-274

Trumpf TruBend Center 5030Year of manuf. : 2021 ____________Description:TruBend Center 5030:- Robust machine frame: - Angular direct drive:- Crowning system:- Machine control with touchscreen operation:- TecZone Fold programming – floating licence:- 2-axis part manipulator with suction modules:- 5-axis backgauge:- Optical angle assistant:- ToolMaster:- Hold-down tools:- OBW90 and UBW90 bending toolsTechnical specificationsMinimum bending depth (standard tool):145 mmMinimum bending depth (with additional hold-down tool):40 mmMaximum bending length:3,123 mmMinimum bending length:80 mmHold-down force:101 tMaximum box height:220 mmMinimum material thickness:0.4 mmMaximum steel material thickness:3 mmMaximum stainless steel material thickness:2.2 mmMaximum aluminium material thickness:4 mmRapid traverse Y-axis (press beam):250 mm/s5-axis backgauge:1,700 mm/sToolMaster Bend:2,400 mm/sD ...

sheet width: 1550 mm plate thickness: 6.5 mm pre-bending: 4.5 mm diameter of upper rolls: 150 mm side roll diameter: 130 mm diameter of lower rolls: 150 mm distance: max. OW zu UW 20.0 mm voltage: 400 V total power requirement: 1.1 + 2.2 kW weight of the machine ca.: 2370 kg range L-W-H: 3300 x 1150 x 1110 mm Rarely used, according to the previous owner Current new price approx. 25.000 euros Special price upon request (!) Features: - Electro-hydraulic 4-roll plate bending machine Equipped with a driven top roll and bottom roll Sturdy welded construction - Application range: Light to heavy-duty sheet metal processing (steel/aluminum/stainless steel) - Electro-hydraulic adjustment of the bottom and side rolls - Linear guidance for the side rolls - Top roll driven by a robust electric motor and planetary gearbox - Mobile, separate control console - Hardened, crowned rolls (SAE 1050 /  ...

Bending Tensile Testing Machine Testing of large specimens for bending tensile strength Load ranges: 40kN, 100kN, 200kN Specimen width maximum 1.32 m Specimen length depends on the space required and the specimen weight The buyer must dismantle and load the machine/system. Auction-ID: A1-51071-16

Electromechanical recirculating bending testing machine Machine for determining flexural fatigue strength max. bending moment of 27 Nm with a specimen diameter of 6.74 mm, frequency: from 0 to 120 Hz 200 Hz possible, trapezoidal torque curve between the bearings The blue boxes in the background are not one of them. The control cabinet pictured belongs to this auction and can control up to two of these recirculating bending machines. However, there is only one PUNZ up for auction Auction-ID: A1-51071-18

Fatigue testing machine max. bending moment: ±12Nm alternating max. bending moment: 24Nm swelling, 3 different measuring springs are available, test frequency: 23Hz Waisted flat sample possible in three different variants Optical measuring device, preload and load amplitude can only be adjusted via travel Auction-ID: A1-51071-13

Fatigue testing machine max. bending moment: ±12Nm alternating max. bending moment: 24Nm swelling, 3 different measuring springs are available, test frequency: 23Hz Waisted flat sample possible in three different variants Optical measuring device, preload and load amplitude adjustable via travel Auction-ID: A1-51071-14

Fatigue testing machine max. bending moment: ±12Nm alternating max. bending moment: 24Nm swelling, 3 different measuring springs are available, test frequency: 23Hz Waisted flat sample possible in three different variants Optical measuring device, preload and load amplitude adjustable via travel Auction-ID: A1-51071-12

I - beam section - flat steel: 100 x 15 (d 400) mm I-beam section - upend: 60 x 10 (d 500) mm L-beam: 50x50x6,0 (d 600) mm round material: 35.0 (d 500) mm bar material dia. max.: 70 x 1.5 (d 1500) mm square material: 50x50x3.0 (d 1400) mm bending speed: 8.5 U/min roll diam. toproll: 152 / 162 mm bore: 40.0 mm Stroke length: 120 mm voltage: 400 V total power requirement: 1.1 kW weight: 470 kg range L-W-H: 900 x 600 x 1100 mm Original price with accessories: approx. 10.000 euros Features: - Two driven rollers (lower rollers) - Manual feed of the upper roller - Horizontal and vertical working positions - Shafts mounted with tapered roller bearings - Lateral, manually adjustable stop rollers - 1 set of standard rollersâsplit - 1 sets of tube rollers - 1 freely movable control unit - Operating instructions The data for this ad was created with ModulMWS - the software solution of LogoTech  ...

I - beam section - flat steel: 120 x 20 (d 750) mm I-beam section - upend: 60 x 10 (d800) mm L-beam: 50 x 5 (d 1200) mm bar material - diameter: 35.0 (d 800) mm bar material dia. max.: 70 x 3.0 (1200) mm : 50.0 mm diameter of upper rolls: 155 mm diameter of lower rolls: 155 mm Stroke length: 150 mm Rotating speeds: 9.0 U/min total power requirement: 1.3 kW weight: 305 kg range L-W-H: 900 x 700 x 1500 mm Features: - Robust electric-motor-driven ring/profile bending machine - Machine base frame with rear storage shelf - Can be used in both horizontal and vertical orientations - Equipped with a wide variety of roller sets Split roller segments Pipe rollers - Electro-hydraulic feed of the upper roller - Manually adjustable side/alignment rollers - 1 freely movable control panel - Base frame with forklift pockets For easy transport The data for this ad was created with ModulMWS - the sof ...