plate bending roll used for sale

: gebraucht : 1988 : 090151 : prompt, Zwischenverkauf v : Italien : 12800 € : 1 : 42 mm : 4665 mm : 800 mm : 1160 mm : 1470 kg : 42 x 2,5 mm : 40 x 1,2 mm : 30 x 40 x 1,7 mm : 40 x 30 x 1,3 mm : 255 mm : 22 mm : 180 ° : 90 °/s : 5.5 kW : 120 l Capacity specifications refer to 400 N/mm² Maximum bending radius with pipe guide rollers: 255 mm Maximum bending radius with pipe guide slide: 175 mm Minimum bending angle: 4° Maximum usable length without positioning device: 3900 mm Maximum usable length with positioning device: 3370 mm Adjustable mandrel extension travel from 8 mm Opening and closing travel of the counter-clamping jaws: 0-45 mm Opening and closing travel of the rollers or slides: 12-22-42 mm Operating manual in German Machine does not comply with AMVO or UVV regulations Tools not included BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you ma ...

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 197600 € : 3734.64 € : 400 to : 6050 mm : 3 : 365 mm : 5100 mm : 510 mm : 630 mm : hydraulisch : 120 mm/s : 8 mm/s : 100 mm/s : 750 mm : 350 mm/s : 300 mm/s : 250 mm : 1220 mm : 154 mm : 500 l : 37 kW : 7500 mm : 2110 mm : 3810 mm : 34660 kg 3 axes (Y1, Y2, X) CNC control DT-15 - 2D grafic display 15", - intuitive touch-screen control (simple drawing of the bending outline with your finger) - user friendly programming in dialogue form - automatic calculation of the bending sequence - automatic calculation of the blank sheet size - graphic product and tool memory - correction possibility - USB interfaces for backup and programm transportation - PC software, generating programms on the PC and transfer to the machine by USB servo motorized back gauge on linear guides and ball screws back gauge finger blocks on double linear guides CNC cr ...

: neu : 2025 : 090089 : prompt, Zwischenverkauf v : Türkei : 8900 € : 171.77 € : 1 : 20 to : 185 mm : 200 x 12 mm : 480 x 1060 mm : 200 mm : 80 mm : 10 mm/s : 10 mm/s : 2.2 kW : 930 mm : 1150 mm : 480 mm : 1200 mm : 530 kg Programmable stroke and retraction point Adjustable speed and pressure Manual jog operation and automatic operating mode Holding pins and tools hardened and ground 3 holder pins Bending tool Manual stop 400 mm Foot pedal OPTIONS: Cutting-, punching- or pipe bending tools on request The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : WA0127 : 1230 € : 1 : 2500 mm : 70 mm : 70 mm : 8/11/12/16/24/36 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : WA0011 : 292 € : 1 : 835 mm : 80 mm : 12 mm mint condition The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : WA0012 : 292 € : 1 : 835 mm : 80 mm : 12 mm mint condition The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : WA0151 : 217 € : 1 : 835 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 144300 € : 2727.27 € : 320 to : 3050 mm : Y1 / Y2 / X und R Achse : 365 mm : 2600 mm : 410 mm : 630 mm : hydraulisch : 160 mm/s : 10 mm/s : 160 mm/s : 650 mm : 500 mm/s : 250 mm : 900 mm : 104 mm : 2 x 11 kW : 4300 mm : 1820 mm : 3330 mm : 16500 kg 1 SERVO MOTOR AND PUMP PER CYLINDER 4 axes (Y1, Y2,X andR) CNC control SKY 22 - intuitive touch-screen control (simple drawing of the bending outline with your finger) 21,5 in full HD - with 2D and 3D working screen - direct programming of the bending angle - user friendly programming in dialogue form optionally in 2D or 3D mode - 2D and 3D simulation of the bending sequence - automatic tool selection in 3D mode - automatic calculation of the blank sheet size - bending order calculation - graphic product and tool memory - correction possibility - USB and Ethernet interfaces for import, backup a ...

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 98300 € : 1857.87 € : 135 to : 3050 mm : Y1 / Y2 / X und R Achse : 265 mm : 2600 mm : 410 mm : 530 mm : hydraulisch : 200 mm/s : 10 mm/s : 200 mm/s : 650 mm : 500 mm/s : 250 mm : 900 mm : 104 mm : 4200 mm : 1680 mm : 2750 mm : 9500 kg 1 SERVO MOTOR AND PUMP PER CYLINDER 4 axes (Y1, Y2,X andR) CNC control SKY 22 - intuitive touch-screen control (simple drawing of the bending outline with your finger) 21,5 in full HD - with 2D and 3D working screen - direct programming of the bending angle - user friendly programming in dialogue form optionally in 2D or 3D mode - 2D and 3D simulation of the bending sequence - automatic tool selection in 3D mode - automatic calculation of the blank sheet size - bending order calculation - graphic product and tool memory - correction possibility - USB and Ethernet interfaces for import, backup and programm tr ...

: neu : 2025 : 090131 : prompt, Zwischenverkauf v : Türkei : 4700 € : 109.71 € : 1 : 50 mm : 155 mm : 2 : 1.5 kW : 4,5 m/min : 60x10 mm / 500 mm, 40x10 : 100x15 mm / 450 mm, 60 x : 35x35 mm / 900 mm, 20x20 : Ø 35 mm / 600 mm, Ø 30 mm : Ø 70x2 mm / 1.000 mm, Ø 3 : 70x30x2 mm / 1.200 mm, 50 : 50x50x3 mm / 1.700 mm, 40 : 50x50x5 mm / 800 mm, 40x4 : 50x50x6 mm / 1.000 mm, 30 : 1050 mm : 750 mm : 1450 mm : 390 kg 2 mech. driven rolls strong cast steel construction shafts made of special steel,hardened and ground top roll manual adjustable hardened universal rolls lateral rolls adjustable in 1 axis horizontal and vertical operation double foot pedal forfor- and backward drive machine and equipment accordingto the CE regulations user manual in GERMAN and ENGLISH WE HAVE MORE THAN 210 REFERENCES! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ...

: neu : ca. 12 Wochen ab Auftrags : Türkei : 11800 € : 226.56 € : 60 mm : 215 mm : 215 mm : 3 : 1.5 kW : 4 m/min : 80x20 mm / 1200 mm, 40x10 : 120x25 mm / 600 mm, 50 x : 50x50 mm / 800 mm, 20x20 : Ø 50 mm / 800 mm, Ø 20 mm : Ø 100x2 mm / 1600 mm, Ø 6 : 80x40x3 mm / 1400 mm, 40x : 70x3 mm / 1600 mm, 40x2 m : 70x70x7 mm / 1000 mm, 40x : 70x70x7 mm / 1200 mm, 40x : 1000 mm : 1400 mm : 1650 mm : 950 kg 3 mech. driven rolls (brake motor) hardened shafts top roll hydraulic adjustable hardened universal rolls lateral rolls adjustable in 1 axis horizontal and vertical operation double foot pedal forfor- and backward drive machine and equipment accordingto the CE regulations user manual in GERMAN and ENGLISH WE HAVE MORE THAN 260 REFERENCES! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2026 : 090180 : prompt, Zwischenverkauf v : Türkei : 8300 € : 160.19 € : 1 : 50 mm : 152 mm : 162 mm : 3 : 1.1 kW : 4,5 m/min : 60x10 mm / 600 mm, 20x10 : 100x15 mm / 600 mm, 50 x : 35x35 mm / 600 mm, 15x15 : 35 mm / 600 mm, Dm. 20 mm : 70x2 mm / 1200 mm, Dm. 25 : 70x30x3 mm / 1500 mm, 30x : 50x50x3 mm / 1600 mm, 20x : 50x50x6 mm / 600 mm, 30x3 : 50x50x6 mm / 900 mm, 30x3 : 810 mm : 950 mm : 1500 mm : 500 kg 3 mech. driven rolls (brake motor) hardened shafts top roll hydraulic adjustable hardened universal rolls lateral rolls adjustable in 1 axis horizontal and vertical operation double foot pedal forfor- and backward drive machine and equipment accordingto the CE regulations user manual in GERMAN and ENGLISH WE HAVE MORE THAN 210 REFERENCES! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : WA0039 : 180 € : 1 : 415 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : WA0143 : 690 € : 1 : 3100 mm : 90 mm : 25 mm mint condition The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 94120 € : 1778.87 € : 175 to : 4050 mm : Y1 / Y2 / X Achse : 265 mm : 3600 mm : 450 mm : 530 mm : hydraulisch : 160 mm/s : 10 mm/s : 140 mm/s : 500 mm/s : 350 mm/s : 250 mm : 900 mm : 104 mm : 250 l : 18.5 kW : 5250 mm : 1700 mm : 2850 mm : 12780 kg 3 axes (Y1, Y2,X) CNC control DT-15 - 2D grafic display 15", - intuitive touch-screen control (simple drawing of the bending outline with your finger) - user friendly programming in dialogue form - automatic calculation of the bending sequence - automatic calculation of the blank sheet size - graphic product and tool memory - correction possibility - USB interfaces for backup and programm transportation - PC software, generating programms on the PC and transfer to the machine by USB servo motorized back gauge on linear guides and ball screws back gauge finger blocks on double linear guides ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 112813 € : 2132.17 € : 320 to : 3050 mm : Y1 / Y2 / X Achse : 365 mm : 2600 mm : 450 mm : 630 mm : hydraulisch : 160 mm/s : 10 mm/s : 140 mm/s : 500 mm/s : 350 mm/s : 250 mm : 900 mm : 154 mm : 250 l : 37 kW : 4300 mm : 1820 mm : 3330 mm : 17100 kg Standard accessories: 3 axes (Y1, Y2,X) CNC control DT-15 - 2D grafic display 15", - intuitive touch-screen control (simple drawing of the bending outline with your finger) - user friendly programming in dialogue form - automatic calculation of the bending sequence - automatic calculation of the blank sheet size - graphic product and tool memory - correction possibility - USB interfaces for backup and programm transportation - PC software, generating programms on the PC and transfer to the machine by USB servo motorized back gauge on linear guides and ball screws back gauge finger blocks on ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 106178 € : 2006.76 € : 175 to : 3050 mm : Y1 / Y2 / X / R Achse : 265 mm : 2600 mm : 410 mm : 530 mm : hydraulisch : 200 mm/s : 10 mm/s : 200 mm/s : 650 mm : 500 mm/s : 250 mm : 900 mm : 104 mm : 2 x 4 kW : 4250 mm : 1700 mm : 2750 mm : 10900 kg 1 SERVO MOTOR AND PUMP PER CYLINDER Standard accessories: 4 axes (Y1, Y2,X and R) Color graphics control Delem DA 66 S - 2D graphical touch screen programming mode - 3D machine representation, in simulation and production - 24", high resolution color TFT - Delem Modusys compatibility (module scalability and adaptivity) - USB, peripheral interfacing - User specific application support within the control&apos,s multitasking environment - Sensor bending &, correction interface - Profile-S2D offline software servo motorized back gauge on linear guides and ball screws back gauge finger blocks on ...

: gebraucht : WA0138 : 1960 € : 1 : 3100 mm : 200 mm slightly cranked The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : WA0032 : 228 € : 1 : 835 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : WA0149 : 690 € : 1 : 3010 mm : 24 mm : 160 mm : 10 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : WA0137 : 1960 € : 1 : 3000 mm : 190 mm slightly cranked The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 137900 € : 2606.31 € : 220 to : 6050 mm : Y1 / Y2 / X Achse : 265 mm : 5100 mm : 450 mm : 530 mm : hydraulisch : 160 mm/s : 10 mm/s : 140 mm/s : 500 mm/s : 350 mm/s : 250 mm : 1050 mm : 154 mm : 250 l : 22 kW : 7500 mm : 1770 mm : 3350 mm : 20800 kg 3 axes (Y1, Y2,X) CNC control DT-15 - 2D grafic display 15", - intuitive touch-screen control (simple drawing of the bending outline with your finger) - user friendly programming in dialogue form - automatic calculation of the bending sequence - automatic calculation of the blank sheet size - graphic product and tool memory - correction possibility - USB interfaces for backup and programm transportation - PC software, generating programms on the PC and transfer to the machine by USB servo motorized back gauge on linear guides and ball screws back gauge finger blocks on double linear guides ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 21900 € : 420.48 € : 80 to : 285 mm : 300x25 mm : 750x1425 mm : 300 mm : 105 mm : 10 mm/s : 10 mm/s : 10 kW : 930 mm : 1430 mm : 750 mm : 1450 mm : 1700 kg Stroke adjustment with digital display Manual and automatic operation mode Tool holder pins and tools hardened and ground Bending tool Foot pedal OPTIONS: Cutting-, punching- or pipe bending tools on request The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 187100 € : 3536.19 € : 400 to : 4050 mm : Y1 / Y2 / X und R Achse : 365 mm : 3400 mm : 410 mm : 630 mm : hydraulisch : 160 mm/s : 10 mm/s : 160 mm/s : 650 mm : 500 mm/s : 250 mm : 900 mm : 154 mm : 2 x 11 kW : 5750 mm : 2110 mm : 3450 mm : 27780 kg 1 SERVO MOTOR AND PUMP PER CYLINDER 4 axes (Y1, Y2,X andR) CNC control SKY 22 - intuitive touch-screen control (simple drawing of the bending outline with your finger) 21,5 in full HD - with 2D and 3D working screen - direct programming of the bending angle - user friendly programming in dialogue form optionally in 2D or 3D mode - 2D and 3D simulation of the bending sequence - automatic tool selection in 3D mode - automatic calculation of the blank sheet size - bending order calculation - graphic product and tool memory - correction possibility - USB and Ethernet interfaces for import, backup a ...

: neu : ca. 12 Wochen ab Auftrags : Türkei : 15900 € : 305.28 € : 50 - 60 mm : 180 mm : 180 mm : 180 mm : 3 : 3.75 kW : 6 m/min : 60x10 mm / 500 mm, 20x5 m : 80x20 mm / 500 mm, 50x5 m : 32x32 mm / 400 mm, 12x12 : Ø 35 mm / 350 mm, Ø 10 mm : Ø 60x2 mm / 600 mm, Ø 15 : 50x25x3 mm / 450 mm, 20x1 : 45x3 mm / 600 mm, 20x2 mm : 60x60x6 mm / 650 mm, 30x3 : 50x50x5 mm / 550 mm, 30x3 : UPN 80 / 600 mm, UPN30 / : UPN 65 / 600 mm, UPN 30 / : IPN 80 / 600 mm : 1200 mm : 850 mm : 1200 mm : 955 kg 3 mech. driven rolls (brake motor) hardened shafts lower rolls hydraulic adjustablehardened universal rolls lateral rolls adjustable in 1 axis horizontal and vertical operation digital read out for the position of the lower rolls machine and equipment accordingto the CE regulations user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech ...

: gebraucht : 2022 : 8254 : prompt, Zwischenverkauf v : Türkei : 22240 € : 1 : 30 to : 1250 mm : X und Y Achse : 150 mm : 1010 mm : 255 mm : 265 mm : hydraulisch : 210 mm/s : 10 mm/s : 3 kW : 1760 mm : 1375 mm : 2135 mm : 1700 kg DEMO MACHINE, MINT CONDITION NC control for immersion depth (Y) and back gauge (X) synchronization control by means of a torsion shaft sheet support arms light barriers die seat and die die seat with 4 V openings split upper tool, slightly cranked, divided pedal user manual in GERMAN incl. laser protection device Fiessler (sample photo) BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstr ...

: neu : 2025 : 080112 : prompt, Zwischenverkauf v : Türkei : 86376 € : 1438.29 € : 1 : 76100 € : 175 to : 3050 mm : Y1 / Y2 / X und R-Achse : 265 mm : 2600 mm : 450 mm : 530 mm : hydraulisch : 160 mm/s : 10 mm/s : 100 mm/s : 500 mm/s : 350 mm/s : 250 mm : 900 mm : 104 mm : 250 l : 18.5 kW : 4250 mm : 1700 mm : 2850 mm : 10900 kg 4axes (Y1, Y2,X and R) CNC control DT-15 - 2D grafic display 15", - intuitive touch-screen control (simple drawing of the bending outline with your finger) - user friendly programming in dialogue form - automatic calculation of the bending sequence - automatic calculation of the blank sheet size - graphic product and tool memory - correction possibility - USB interfaces for backup and programm transportation - PC software, generating programms on the PC and transfer to the machine by USB servo motorized back gauge on linear guides and ball screws back  ...

: neu : 2024 : 8319 : prompt, Zwischenverkauf v : Türkei : 77982 € : 1326.78 € : 1 : 70200 € : 200 to : 3050 mm : Y1 / Y2 / X und R Achse : 210 mm : 2550 mm : 250 mm : 445 mm : hydraulisch : 100 mm/s : 7 mm/s : 73 mm/s : 620 (mit optionaler R-Ach mm : 250 mm/s : 858 mm : 104 mm : 150 l : 15 kW : 3750 mm : 1390 mm : 2500 mm : 8160 kg 4 axes (Y1, Y2, X and R axis) CNC control DT-10 - intuitive touch-screen control (simple drawing of the bending outline with your finger) - user friendly programming in dialogue form - automatic calculation of bending sequence - automatic calculation of the blank sheet size - graphic product and tool memory - correction possibility - USB interfaces for backup and programm transportation - PC software, generating programms on the PC and transfer to the machine by USB CNC controlled back gauge with linear guide and ball screw spindles CNC CONTROLLED CROW ...

BEYELER RT80x2050-CNC ist eine Abkantpresse, ausgelegt auf Präzision, hohe Genauigkeit und Zuverlässigkeit. Leistungsdaten: 800 kN, Arbeitslänge 2050 mm, Ständerweite 2050 mm, Ausladung 255 mm, Hub von 215 mm, Einbauhöhe max. 390 mm. Technik: Pressgang 8 mm/s, Auf 60 mm/s, 3x380 V 50 Hz, Motor 6 kW, Gewicht ~6700 kg, Abmessungen 3700×2000×3400 mm. Zubehör: Satz Biegeschienen, Satz Geissfussschienen, motorischer Anschlag 500 mm. Ermöglicht enge Toleranzen; Branchen: Automotive, Luftfahrt, Maschinenbau, Medizintechnik, Uhrenbau. Technische Daten ohne Gewähr

AMADA ITS2 2 ist eine Abkantpresse mit hoher Präzision, entwickelt für große Genauigkeit und Zuverlässigkeit. Kapazitäten: gesamt 4 Achsen, Druckkraft 25 t, Biegelänge max 1250 mm, Durchgang zwischen Pressbalken 320 mm, Abstand Ständer 1020 mm, Hub max 100 mm, Ausladung 200 mm. Technische Daten: Zustellgeschwindigkeit 75 mm/s, Arbeitsgeschw. 10 mm/s, Rückhub 80 m/min, Tisch 1200×60 mm H 865 mm, Ölfassung 30 l, Anschluss 3x400 V 50 Hz, Motor 4 kW, Gewicht ca. 1600 kg, Abmessungen L1800×B1200×H2000 mm. Erreicht enge Toleranzen; Anwendungen: Automotive, Luftfahrt, Werkzeugbau, Medizintechnik, Uhrenindustrie. Technische Daten ohne Gewähr

EITEL RP 40 ist eine Richtpresse, ausgelegt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Leistungsdaten: Tischlänge 1400 mm, Tischbreite 250 mm, Presskraft 400 kN, Hublänge 150 mm, Stösselgeschwindigkeit 2 m/min. Technische Daten: Anschluss 50 Hz 3x 380 Volt, Antriebsleistung 7.5 kW, Maschinengewicht ca. 1500 kg, Abmessungen L 1345 × B 720 × H 2450 mm. Ermöglicht enge Toleranzen; typische Einsatzbereiche: Automotive, Uhrenindustrie, Werkzeugbau, Luftfahrt, Medizintechnik Technische Daten ohne Gewähr

BYSTRONIC Hämmerle 3P130 ist eine CNC Abkantpresse, entwickelt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Kapazitäten: Druckleistung 1300 kN, Biegelänge max 3100 mm, Hub 400 mm, Ausladung 250 mm, Einbauhöhe 917 mm, Arbeitsgeschwindigkeit 1–10 mm/s. Technische Daten: Anschluss 3x400 V 50 Hz, Steuerspannung 24 V, Motorleistung 19 kW, installierte Leistung 27 kW, Gewicht ca. 14.200 kg, Ölbehälter 300 l; Abmessungen L4435×B2734×H3095 mm. Erreicht enge Toleranzen; typische Branchen: Automotive, Luftfahrt, Werkzeugmaschinen, Medizintechnik. Technische Daten ohne Gewähr

: neu : ca. 10 Wochen ab Auftrags : Türkei : 63320 € : 1196.75 € : 100 to : 2550 mm : Y1 / Y2 / X Achse : 265 mm : 2200 mm : 450 mm : 530 mm : hydraulisch : 180 mm/s : 10 mm/s : 120 mm/s : 500 mm/s : 350 mm/s : 250 mm : 900 mm : 104 mm : 100 l : 11 kW : 3800 mm : 1670 mm : 2850 mm : 7800 kg 3 axes (Y1, Y2,X) CNC control DT-15 - 2D grafic display 15", - intuitive touch-screen control (simple drawing of the bending outline with your finger) - user friendly programming in dialogue form - automatic calculation of the bending sequence - automatic calculation of the blank sheet size - graphic product and tool memory - correction possibility - USB interfaces for backup and programm transportation - PC software, generating programms on the PC and transfer to the machine by USB servo motorized back gauge on linear guides and ball screws back gauge finger blocks on double linear guides CN ...

: neu : 2026 : 080186 : prompt, Zwischenverkauf v : Türkei : 81476 € : 1309.77 € : 1 : 69300 € : 135 to : 3050 mm : Y1 / Y2 / X und RAchse : 265 mm : 2600 mm : 450 mm : 530 mm : hydraulisch : 160 mm/s : 10 mm/s : 120 mm/s : 500 mm : 500 mm/s : 350 mm/s : 250 mm : 900 mm : 150 l : 15 kW : 4250 mm : 1700 mm : 2850 mm : 9580 kg Special campaign Special price and SKY 22 control free of charge Standard accessories: 4 axes (Y1, Y2,X and R) CNC control SKY 22 - intuitive touch-screen control (simple drawing of the bending outline with your finger) 21,5 in full HD - with 2D and 3D working screen - direct programming of the bending angle - user friendly programming in dialogue form optionally in 2D or 3D mode - 2D and 3D simulation of the bending sequence - automatic tool selection in 3D mode - automatic calculation of the blank sheet size - bending order calculation - graphic product and  ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 88113 € : 1665.34 € : 220 to : 3050 mm : Y1 / Y2 / X Achse : 265 mm : 2600 mm : 450 mm : 530 mm : hydraulisch : 140 mm/s : 10 mm/s : 140 mm/s : 500 mm/s : 350 mm/s : 250 mm : 900 mm : 104 mm : 250 l : 22 kW : 4250 mm : 1770 mm : 3000 mm : 12600 kg Standard accessories: 3 axes (Y1, Y2,X) CNC control DT-15 - 2D grafic display 15", - intuitive touch-screen control (simple drawing of the bending outline with your finger) - user friendly programming in dialogue form - automatic calculation of the bending sequence - automatic calculation of the blank sheet size - graphic product and tool memory - correction possibility - USB interfaces for backup and programm transportation - PC software, generating programms on the PC and transfer to the machine by USB servo motorized back gauge on linear guides and ball screws back gauge finger blocks on  ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 112800 € : 2131.92 € : 220 to : 3050 mm : Y1 / Y2 / X und R Achse : 265 mm : 2600 mm : 410 mm : 530 mm : hydraulisch : 200 mm/s : 12 mm/s : 180 mm/s : 650 mm : 500 mm/s : 250 mm : 900 mm : 104 mm : 11 kW : 4250 mm : 1770 mm : 2900 mm : 12250 kg 1 SERVO MOTOR AND PUMP PER CYLINDER Standard accessories: 4 axes (Y1, Y2,X andR) CNC control SKY 22 - intuitive touch-screen control (simple drawing of the bending outline with your finger) 21,5 in full HD - with 2D and 3D working screen - direct programming of the bending angle - user friendly programming in dialogue form optionally in 2D or 3D mode - 2D and 3D simulation of the bending sequence - automatic tool selection in 3D mode - automatic calculation of the blank sheet size - bending order calculation - graphic product and tool memory - correction possibility - USB and Ethernet interfaces fo ...

: neu : ca. 4 Monate ab Auftragse : Italien : 92000 € : 1738.8 € : 200 to : 500 mm : 2.500 x 2.050 mm : 800 mm : 20 mm/s : 2 mm/s : 2950 mm : 2500 mm : 2600 mm : 6500 kg : horizontal verschiebbar : 2050 mm : 1450 mm : 1600 mm horizontal movable cylinder hydraulicaly movable stand control by levers as well as control panel according to CE regulations user manual in GERMAN and ENGLISH OPTIONS: Work table, welded to the base frame, with holes on the surface Control panel on the swivel arm (push buttons for press movement, solenoid valves, Siemens CPU) Radio control panel (push buttons for press movement, solenoid valves, Siemens CPU) Siemens control with touchscreen Lifting cylinders in the table (6, 8 or 10 pcs.) No-rotation shaft for the piston 2 speeds for stand movement and cylinder Oil cooler and decompression valve The data for this ad was created with ModulMWS - the software sol ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 127400 € : 2407.86 € : 220 to : 4050 mm : Y1 / Y2 / X und R Achse : 265 mm : 3600 mm : 410 mm : 530 mm : hydraulisch : 200 mm/s : 12 mm/s : 180 mm/s : 650 mm : 500 mm/s : 250 mm : 900 mm : 104 mm : 5250 mm : 1770 mm : 2900 mm : 15000 kg 1 SERVO MOTOR AND PUMP PER CYLINDER Standard accessories: 4 axes (Y1, Y2,X andR) CNC control SKY 22 - intuitive touch-screen control (simple drawing of the bending outline with your finger) 21,5 in full HD - with 2D and 3D working screen - direct programming of the bending angle - user friendly programming in dialogue form optionally in 2D or 3D mode - 2D and 3D simulation of the bending sequence - automatic tool selection in 3D mode - automatic calculation of the blank sheet size - bending order calculation - graphic product and tool memory - correction possibility - USB and Ethernet interfaces for import ...

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 292300 € : 600 to : 6050 mm : Y1 / Y2 / X und R Achse : 365 mm : 5100 mm : 510 mm : 700 mm : hydraulisch : 80 mm/s : 6,5 mm/s : 80 mm/s : 750 mm : 280 l : 2 x 11 kW kW : 7600 mm : 2650 mm : 3950 mm : 52500 kg 1 SERVO MOTOR AND PUMP PER CYLINDER 4 axes (Y1, Y2,X andR) CNC control SKY 22 - intuitive touch-screen control (simple drawing of the bending outline with your finger) 21,5 in full HD - with 2D and 3D working screen - direct programming of the bending angle - user friendly programming in dialogue form optionally in 2D or 3D mode - 2D and 3D simulation of the bending sequence - automatic tool selection in 3D mode - automatic calculation of the blank sheet size - bending order calculation - graphic product and tool memory - correction possibility - USB and Ethernet interfaces for import, backup and programm transportation - OS: Windows - ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 123713 € : 2338.18 € : 320 to : 4050 mm : Y1 / Y2 / X Achse : 365 mm : 3600 mm : 450 mm : 630 mm : hydraulisch : 160 mm/s : 10 mm/s : 140 mm/s : 500 mm/s : 350 mm/s : 250 mm : 900 mm : 154 mm : 250 l : 18.5 kW : 5250 mm : 1770 mm : 2850 mm : 20000 kg Standard accessories: 3 axes (Y1, Y2,X) CNC control DT-15 - 2D grafic display 15", - intuitive touch-screen control (simple drawing of the bending outline with your finger) - user friendly programming in dialogue form - automatic calculation of the bending sequence - automatic calculation of the blank sheet size - graphic product and tool memory - correction possibility - USB interfaces for backup and programm transportation - PC software, generating programms on the PC and transfer to the machine by USB servo motorized back gauge on linear guides and ball screws back gauge finger blocks  ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 52400 € : 990.36 € : 60 to : 1250 mm : 3 (Y1, Y2, X) : 265 mm : 1050 mm : 450 mm : 530 mm : hydraulisch : 200 mm/s : 10 mm/s : 110 mm/s : 650 mm : 500 mm/s : 900 mm : 104 mm : 100 l : 7.5 kW : 2300 mm : 1550 mm : 2850 mm : 4700 kg Standard accessories: 3 axes (Y1, Y2,X ) CNC control DT-15 - 2D grafic display 15", - intuitive touch-screen control (simple drawing of the bending outline with your finger) - user friendly programming in dialogue form - automatic calculation of the bending sequence - automatic calculation of the blank sheet size - graphic product and tool memory - correction possibility - USB interfaces for backup and programm transportation - PC software, generating programms on the PC and transfer to the machine by USB servo motorized back gauge on linear guides and ball screws back gauge finger blocks on double linear gu ...

: gebraucht : WA0089 : 142 € : 1 : 835 mm : 1 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : WA0013 : 265 € : 1 : 835 mm : 80 mm : 12 mm mint condition The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : WA0052 : 292 € : 1 : 835 mm : 80 mm : 16 mm mint condition The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : WA0053 : 292 € : 835 mm : 80 mm : 16 mm mint condition The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : WA0054 : 292 € : 1 : 835 mm : 80 mm : 16 mm Mint condition The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : WA0145 : 840 € : 1 : 3100 mm : 40 mm : 115 mm slightly cranked The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : WA0008 : 325 € : 1 : 835 mm : 120 mm : 12 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : WA0066 : 860 € : 1 : 550 mm : 220 mm mint condition divided The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : WA0067 : 860 € : 1 : 515 mm : 220 mm mint condition divided The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.