plate bending roll used for sale

Welding table, straightening table, straightening plate, work table, clamping table straightening plate PAGUS 1000 x 800 mm without feet Dimensions: 1000 x 800 x 250 mm

Welding Table, Straightening Table, Straightening Plate, Work Table, Clamping Table Straightening Plate, Spotting Plate PAGUS Work surface: 800 x 630 mm Height: 170 mm used, tested ! Dimensions: 800 x 630 x 170 mm

Welding Table, Straightening Table, Straightening Plate, Work Table, Clamping Table Straightening Plate PAGUS 1000 x 630 mm Height: 860 mm Dimensions: 1000 x 630 x 860 mm

Welding table, straightening table, straightening pad, work table, clamping table test plate, spotting plate, test ruler, spotting ruler PAGUS work surface: 1500 x 100 mm height: 225 mm used, tested ! Dimensions: 1500 x 100 x 225 mm

Welding Table, Straightening Table, Straightening Plate, Work Table, Clamping Table Straightening Plate, Straightening Table PAGUS Work surface: 1600 x 1000 mm Height: 770 mm used, tested ! Dimensions: 1620 x 1010 x 800 mm

Welding Table, Straightening Table, Straightening Plate, Work Table, Clamping Table Scribing Plate, Spotting Plate, Straightening Plate PAGUS Work Surface: 290 x 285 mm Height: 45 mm Weight: 20 kg Dimensions: 290 x 285 x 45 mm

Welding table, straightening table, straightening pad, work table, clamping table marking plate, spotting plate, levelling plate PAGUS work surface: 490 x 400 mm height: 84 mm Dimensions: 490 x 400 x 84 mm

Face plate PAGUS Outer Ø: 400 mm Bolt circle: 135 mm Bore Ø: 100 mm Height with jaws: 140 mm Flange: 175 mm Overall height: 190 mm Short cone used, tested ! Dimensions: 400 x 200 mm

Face plate PAGUS outer Ø: 360 mm bore center Ø: 20 mm threaded flange: Ø 250 mm bolt circle inside: Ø 135 mm bolt circle outside: Ø 225 mm bore M8 / M12 and 4 x Ø 12 mm Thickness with flange: 55 mm Dimensions: 360 x 360 x 55 mm

Face plate PAGUS Outer Ø: 305 mm Bolt circle Ø : 280 mm Bolt circle flange Ø : 52 / 135 mm Bore Ø: 25 mm Thickness: 38 mm Grooves: 10 / 18 mm can be combined with WZ239 ! Dimensions: 305 x 305 x 38 mm

Welding Table, Straightening Table, Straightening Plate, Work Table, Clamping Table Straightening Plate, Spotting Plate PAGUS Work Surface: 410 x 410 mm Height: 105 mm Heavy Duty Version Dimensions: 410 x 410 x 105 mm

Face Plate ROTO RECORD PL 315x6 TGL 30-22313 Outer Ø: 315 mm Bolt Circle Ø : 133.5 mm Bore Ø: 100 mm n max: 710 rpm New ! preserved ! Dimensions: 315 x 315 x 125 mm

Welding table, straightening table, straightening plate, work table, clamping table straightening plate, leveling table,spotting plate PAGUS work surface: 800 x 630 mm height: 170 mm used, tested ! Dimensions: 800 x 630 mm x 170 mm

Offset plate puncher Bacher 2000, 425 mm, please review perforation shape- U and U.

Offset plate puncher Ryobi RP 22, in very good condition.

Digital control plate for RCI 2 Man Roland offset presses such as Rekord RVK generation. 2 pieces in stock- Slovenia and Sweden. New never used or insta

BEIL register systems 425 /printing plate die-cutter suitable for autoplate system Distance 425 mm Art.Nr. L974

Producer: Fischer Year of Make: 1999 Output: 250hl/pc

Printing plate punch Beil 425 THAP; Condition New and unused; Tabletop device; die-cut 425 Autoplate; suitable for SM 52/74; Max. Top width 810mm. Plate punch hatchet 425 THAP; condition new, never used; table top machine; Punch System 425 Autoplate; used for SM52/74; max.plate width 810mm.

Clamping jaws, jaw boxes for face plate type 1516

Baking Plates for EWA Baking Machine for Molded Cones - Condition: used - Wafer Length: approx. 130 mm - Wafer Diameter: approx. 30 mm

Baking Plates for PRO 1 Baking Machine - Condition: used - Engraving (Lower Baking Plate): approx. 5 x 5 mm - Engraving Depth (Lower Baking Plate): approx. 1,45 mm - Wafer Sheet Thickness: approx. 3 mm - Connecting Shaft: approx. Ø 16 mm - Collar radius: approx. 96,5 mm

Lastra SM 65 development machine Online Plate Developing Machine for Thermal Metal Plates 65 cm inlet width, incl. cooler cleaned & tested Year of construction 2002 Art.Nr. L986

Hot plate press (electric) Brand: ORMA Type: NPC 6/120 new machine Technical data: Heating plates: 3500x1300mm Cylinder: 6 pieces Press force: 120t Stroke/opening dimension: 450mm Connection value: 28.8kW (ELKOM plates) Options: - Intermediate plate - Anodized surface for ELKOM panels - Parallelism sensor á 1,000.00 EUR - Pressing mechanism from above (fixed lower plate) - Max. temperature till 150°C - Max. temperature till 200°C - 4-sided loading possible - Mylar protective film - Fiberglass Teflon protection - Hardware for Industry 4.0

Vacuum lifter, vacuum lifter from Schmalz for heavy plates with new suction rubber Load capacity 150kg horizontally and vertically Vacuum cleaner can be swivelled 90 degrees motorised Suction box 1000 x 675mm Acoustic warning signal in case of too low vacuum 400V, 1.5kW Can be attached to on-site chain hoist CE mark No test book available Vacuum cleaner rubber renewed Mint condition The machine can be demonstrated on site by appointment. We offer only machines that are ready for demonstration in our warehouse, see "other offers of this year". provider".

- Filter surface area: 3m2 - Evacuation: manual Equipment : - Control window with inlet and outlet lighting - Circulation pump - Adjustable dosing pump - Agitator - Connection: butterfly valves, Friedrich n°2 40 Dimensions : - Length: 1750 mm - Width: 700 mm - Height: 1000 mm - In working order

Fuji FLHZ 85 CD Quartz 3 Plate Developing Machine; very good condition; cleaned and tested; Inlet width 850mm; Chiller. Plate processor Fuji FLHZ 85 CD Quartz 3; very good condition; cleaned and checked; working width 850mm; Chiller.

- Number of sections: 1 - Capacity: 1000 l/h - Connection: Clamp 50.5 mm - In good condition

- invoersysteem voor vlak- en hoekstaal - met toevoerwagen en materiaalklem - Vacon 110 software CNC-besturing Platstaal gt; maximale lengte: 15 200 mm gt; maximale breedte: 50-500 mm gt; maximale dikte: 5-25 mm Hoekstaal gt; maximale lengte: 15 200 mm gt; maximale breedte/hoogte: 50 x 50 - 200 x 200 mm gt; maximale dikte: 16 mm gt; maximaal gewicht: 750 kg Hydraulisch ponsen VPO 1000 gt; cap: 100 ton gt; perforatiediameter/dikte: 57/15 mm of 32/25 mm gt; 4 ponsunits voor vlak staal gt; 1 ponseenheid voor hoekstaal gt; incl. gereedschap Hydraulische schaar voor vlak staal VPS 2200 gt; cap: 220 ton gt; breedte/dikte: 500/25 mm gt; hoek: +/- 45° Hydraulische hoekschaar voor staal VHS 2400 gt; cap: 240 ton gt; 200 x 200 mm / 16 mm Hydraulische coderingseenheid VNI 1/36 gt; 1 codeerschijf gt; 36 tekens gt; tekenhoogte x diepte: 10 x 1 mm Hydraulisch aggregaat VHA 37 gt; 37 kW - 250 bar

Ø 100, class 1.6 0 - 25 bar Version: Vertical Display range: 0 - 25 bar Scale graduation: 0.5 bar Materials: Housing 1.4571, measuring system and connection, viewing panel multi-layer safety glass Connection: 1/2'' bottom (AB) Plate spring pressure gauge

Used-refurbished machine Unger 160 mm cutting attachment 4500 kg/h max. capacity Technical data Mixing chamber volume: 400 L Capacity approx.: 4500 kg/h Power: 35 kW (grinder motor) Electrical fuse: 125 A Dimensions: 1500x1335x1810mm Weight: 1700 kg WAW G 160 model 2000 S with mixing arm, hydraulic loader for 200 l hopper, push button operation, mixing arm, hopper volume 400 l, mixing capacity approx. 260 kg, machine weight approx. 1700 kg, hole plate diameter 160 mm, max. capacity 4500 kg/h, brand new cutting set with sorting and separating device (bone removal accessory).

Format (cm): 56 x 42

M. No.: 91080-41861 Age : around 1994 Speed: first 70 Sec. / Following 52 Sec. Format (cm): 41,4 x 55 (max.) Equipment / Additional information: Plate width (cm): 22.9 - 41.4 Plate length (cm): 22.0 - 55 Maximum effective image size (cm): 40.4 - 54 Magnification: 100% Lens (cm): 25 Step and Repeat setter: Original side down Digital recording: 0 - 99 Light source: 1 Halogen-Diode, 80 V / 800 W Tank capacity: Activator 0.55 l, stabilizer 0.60 l Power supply: 200 V / 220 V / 240 V, 1.9 Kw High quality plate results: up to 133 lpi

Measuring and marking plateCast steel-grey cast iron heavily ribbedLength 1000 mmWidth 1000 mmThickness 54/225 mmWorking height approx. 800 mm- 4 pieces feet with adjustment screws for aligning the plateWeight 390 kggood surface; used

4 pieces of adjustable jaws INGERSOLL for face plateChuck jaws for lathe chuck, mechanical clamping device, clamping blockNo: 39.02.10000 / 501.397Jaw width 70 mmJaw length 180 mmJaw carrier height 150 mmBase plate 325 x 265 mm- Step jaws for turning as rotary and drilling jaws- Jaw adjustment via trapezoidal threaded spindle- Jaw support with 6 recesses 40 x 30 mm for fastening- Distance between recesses 280 x 133 and 220 x 90 mm (center)Dimensions L x W x H 325 x 265 x 215 mmWeight per jaw 36.5

Working width: 3050mm, material thickness: 6mm, throat depth: 200mm, back gauge adjustment: 1000mm, drive power: 15kW, cutting angle range: 1°-2°, table height: 900mm. Machine dimensions X/Y/Z: approx. 4100mm/2300mm/2100mm, weight: approx. 8500kg. On-site inspection is possible.

spindle diameter: 130 mm x-travel: 3000 mm y-travel: 2000 mm total power requirement: 4,5 kW weight of the machine ca.: 30 t Spindle Ø 130 mm Spindle taper SK 50 Working range: X = column, longitudinal 3,000 mm Y = headstock, vertical 2,000 mm Z = spindle stroke 1,000 mm Lower table 3,300 x 2.400 mm Max. weight on table 10 tons/m² Min./ max position of work spindle above table 770 / 2,770 mm Feeds 0.9 - 2,000 mm/min Quick feed for headstock and column 5,000 mm/min Quill feed 0.5 - 1,200 mm/min Speed range, partially infinitely variable 4.5 - 1,250 rpm Weight, approx. 30,000 kg Accessories / Special Features HEIDENHAIN Digital Display for 3 axes. Hardened guideways. Ball screw spindles. Infinitely variable spindle speeds and feeds. Feeds can be individually driven with motor. Moving operating platform. Hanging control panel. Manual operati ...

spindle diameter: 125 mm x-travel: 2360 mm y-travel: 1570 mm z-travel: 780 mm w-axis: 410 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 500 mm total power requirement: 0 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

HORIZONTAL PLATE FREEZER CABINET, TUCAL MODEL: A.H. + COOLING COMPRESSOR IN NOISELESS CABINET, MODEL: UC Technical description: Serial number: 609 Power supply: 400 V, 3 Ph, 50 Hz Pressure: 7/10 bar Temperature: -35 / +35 ?C Refrigerant: NH3 Dimensions: 3000 x 1300 x 2300 mm Cooling compressor in noiseless cabinet, model: UC Serial number: 304 Year: 10/2015 Bitzer cooling compressor, type: OSNA8571-k Serial number: 1088702179 Dimensions of noiseless cabinet: 3000 x 1500 x 2320 mm

There is a recirculating air cooling system consisting of an Alfa Laval plate heat exchanger and a Thermofin finned tube heat exchanger. 1) Alfa Laval M10-BW plate heat exchanger, year of manufacture: 2005, cooling capacity: 115kW, flow rate: 28.2m³/h, refrigerant NH3. 2) Finned tube heat exchanger Thermofin TBN, year of manufacture: 2019. Including panel housing and condensate drip tray. Documentation available.

faceplate diameter: 400 mm Bore diameter: 125 mm weight: 70 kg Dimensions (LxWxH): 580 x 580 x 230 mm Unused 4-jaw faceplate with individually adjustable jaws. Size 8 / DIN 55029 (Camlock), max. speed 800 rpm. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cutting lenght 6000 mm Cutting thickness 13 mm

Key data: 1470 mm, 1400 mm, 750 mm

2 Cast iron V supports Width: 1400 mm Height: 1370 mm Base depth: 750 mm Slot width: 200 mm V width: 940 mm V depth: 430 mm Total height under sole: 1470 mm Weight: 2,3 T / unit

Pressure plate punch Beil 780/425-S-H-AP2; cleaned and tested; die-cut 780 and 425 mm autoplate; Investment Contact. Plate punch hatchet 780/425-S-H-AP2; cleaned and checked; punch size 780 and 425mm Autoplate; contact for plate.

40 cut plates with 13 rails Total price Bakery condition Different insertions

30 Round Knitting Plates Casting 7 pcs Different sizes and machines Bakery condition Partly slightly damaged Total price

Copper plate for lapping machine. Dia 600mm, NEW, make: Melchiorre, Mimu Machine Tools Gussago BS Italy, Lapping is a machining process in which two surfaces are rubbed together with an abrasive between them, by hand movement or using a machine., This can take two forms. The first type of lapping (traditionally called grinding), involves rubbing a brittle material such as glass against a surface such as iron or glass itself (also known as the lap or grinding tool) with an abrasive such as aluminum oxide, jewellers rouge, opticians rouge, emery, silicon carbide, diamond, etc., between them. This produces microscopic conchoidal fractures as the abrasive rolls about between the two surfaces and removes material from both., The other form of lapping involves a softer material such as pitch or a ceramic for the lap, which is charged with the abrasive. The lap is then used to cut a harder mate ...

pitting plate for cherries 21-12,, Original Ferrum plate,, 108 holes,, outer diameter: 21 mm,, inner diameter: 12 mm,, very good condition.

Plate apparatus Manufacturer : APV Type: K 55 Capacity: 8,000 litres/hour Technical specifications : 6 Departments 1x steam, 1x hot water, 2x product vs. product, 1x cold water, 1x ice water Capacity 8,000 litres/hour Clip seals 423 plates total Material Plates AISI 316 (V4A), thickness 0.8 mm 1 box with replacement seals is still included. good condition