plate bender used for sale

Pressure plate intermediate table Grafoteam MDT 260 C; condition overhauled; 2 pieces available; Arm length 780mm; Max. Plate size 780x820mm. Plate conveyor Grafoteam MDT 260 C; condition rebuilt; 2 pic. on stock; arm lenght 780mm; max.plate size 780x820mm.

Mechanic plate bending machine Goyar 3C-25/20. Bending lenght: 2000mm. Bending capacity: 25mm. Diameter of upper cylinder: 285mm. Diameter of lower cylinders: 235mm. Main motor power: 20cv. Bending speed: 5 mpm. Weight: 5500Kgs.

Large electronic clamping magnet

Face plate, face plate chuck, four-jaw chuck -Chuck size: Ø 195 mm -with: T slot 10 mm -Thread intake pitch: 3 mm -Weight: 5.7 kg

-Plate rolling machine rubber urethane pinch roll 1-one-pass rolling with pre-bending -Plate sheet width max. 3000 mm -Plate thickness 2 mm depending on the material hardness -fully hydraulic operated with power unit self enclosed - 9 Kw electric power 400Vac/50 Top shaft size 110 mm -Lower roll size 380 mm urethane coated rubber -Hydraulic front opening for the unloading of closed shells. -Upper beam with adjustable pre-load to compensate the deflection of the top roll under load. -Console electric manual/automatic work sequence with digital readout. - EQUIPMENT INSTALLED WITH THE MACHINE -Vacuum cups lifter plate width 3000 mm -Automatic feed pusher plate sheet loader into the rolls- -Side support hydraulic operated with conveyor belts motorized cradle system, all parts rubber coated to protect the plate surface from scratches.

Macbending SMB200-2000/8-10 4 rolls plate rolling machine Full automatic Lifting System Side Supports Machine is like new condition

Akbend AHS 20/06 Plate rolling machine - 4 rolls 2013

TECHNICAL CHARACTERISTICS Year 2018 Length 1000 1.5mm sheet metal Roller diameter 75mm Voltage 400V Frequency 50Hz Power 0.75Kw Current 1.9A 3PH Revolutions 1400r/min

Akyapak AHS 25/13 4 rolls Plate Rolling Machine Side supports Lifting system

Akyapak AHS-10/14x3100 Hydraulic Plate Rolling Machine Machine is in good condition

Extraordinary precision Milling, engraving or cutting is possible with the highest precision, due to the high-quality inclined toothed racks installed on each axis. Ideal for processing plate material With the large machining area, the T-Rex is the best possible choice for milling plate materials, as well as for text or image engraving on 2D, 2.5D or 3D workpieces. Thanks to a assembly aid on the short side of the CNC milling machine, the work surface can be ideally and comfortably equipped with the plate material. The ball rollers allow an effortless glide of the plates. External dimensions LxWxH: 3780x2850x1950 mm Weight: circa 1950 kg Clamping surface XxY: 3030x2020 mm Travel XxYxZ: 3000x2000x200 mm (optional 300/400 mm in Z-axis) Width linear guides X,Y,Z: 20 mm Repeatability: 0.01 mm Reverse play: approx. 0.015 mm Working speed: 12000 mm per minute  ...

Sahinler 4R HSS 25-380 4 rolls plate rolling machine Working length : 2500 mm Maximum thickness : 30 mm

Clean out Unit AGFA Azura C 95 year 2011 Located: Gemany Price: on request

Reconditioned 3 rolls bending machine Maximum lenth: 2500mm, Maximum thickness: 15mm, Minimum rase: 300mm.

Sertom 3000 mm x 6 mm Plate rolling machine Mechanical Plate rolling machine Year 1968

Turkish 70 mm thickness 3 rolls plate rolling machine Machine is in excellent condition Bending length : 3000 mm Bending thickness : 70 mm Lifting system Pre bending Diameter of top roll : 700 mm PLC Control

UBBDA Three Roll Plate Bending Machine The three-roll sheet bending machine is designed for the production of cylindrical and conical sheet shells. Electric motors 42 kW, 580 rpm, 750\1500 rpm Dimensions 12900x5300x5620 Gross weight 166260 t

Very high-quality CNC – controlled precision sheet metal bending machine with automatic bending sequence calculation – automatic CNC – controlled double-sided pre-bending – conical bending device, three hydraulically driven rollers (one hydraulic motor per roll), hydraulic linear sub-roll adjustment – hard chrome-plated piston rods – hardened and ground rollers - PILZ® laser protection - BECKHOFF® CNC – control with Ethernet technology and large touch screen - DANFOSS® precision hydraulics – central lubrication system Maximum bending length 2,000 mm Roll diameter 170 mm Smallest weft diameter = 1.1 x the roll diameter The rollers run in bronze plain bearings. Nominal pre-bending performance over the entire bending length at 5 x D = 5 mm for sheet steel/ST40 Nominal bending performance over the entire bending length at 5 x D = 7 mm sheet steel/ST40 Drive power  ...

Very high-quality CNC – controlled precision sheet metal bending machine with automatic bending sequence calculation - automatic CNC – controlled double-sided pre-bending - Conical bending device - three hydraulically driven rollers (one hydraulic motor per roller) - hydraulic linear under-roll adjustment - hard chrome-plated piston rods - hardened and ground rollers - PILZ® laser protection - BECKHOFF® CNC control with Ethernet technology and large touch screen - DANFOSS® precision hydraulics - Central lubrication system

Bendmak APAS 360 hydraulic plate rolling machine Machine is in excellent condition Maximum thickness : 25 mm Top roll diameter : 350 mm

Very high-quality CNC – controlled precision sheet metal round bending machine with automatic bending sequence calculation – automatic CNC – controlled double-sided pre-bending – conical bending device, three hydraulically driven rollers (one hydraulic motor per roll), hydraulic linear sub-roll adjustment – hard chrome-plated piston rods – hardened and ground rollers - PILZ® laser protection - BECKHOFF® CNC – control with Ethernet technology and large touch screen - DANFOSS® precision hydraulics – central lubrication system Maximum bending length 2,000 mm Roll diameter 170 mm Smallest weft diameter = 1.1 x the roll diameter The rollers run in bronze plain bearings. Nominal pre-bending performance over the entire bending length at 5 x D = 5 mm for sheet steel/ST40 Nominal bending performance over the entire bending length at 5 x D = 7 mm sheet steel/ST40 Drive  ...

Working length : 2000 mm Maximum thickness : 10 mm Machine is in good condition http://www.akyapak.tr/kataloglar/01-Bending(TR-EN-Web).pdf

El. Magnetic clamping plate, magnetic disk Magnetic table, clip Magnetic clamping plate Dimensions: Width x Length x Height (approx. 250 x 500 x 190 mm)

Sahinler 4R HSS 30-400 Plate Rolling Machine Bending length : 3100 mm Maximum bending thickness : 30 mm Upper roll diameter : 400 mm Machine is in good condition

Machine is like new Working length : 2050 mm Max. thickness : 10 mm

Working width : 2500 mm Max. thickness : 48 mm Upper roll Ø : 470 mm Lower/lateral roll Ø : 450 mm

Comal Alpha 160/20 2050 Plate Rolling Machine Machine can be seen under power

Oztas SMR-S 2070 x 170 3 rolls plate rolling machine Machine is like new condition

Plate heat exchanger,stainless acid proof steel,APV type H17,2 zones,30 + 122 plates.

Plate heat exchanger,stainless steel,APV/Pasilac N35,4 zones,33-87-41-12 plates.

Plate heat exchanger,stainless acid proof steel,APV H17,painted,edge-clamped,14 plates.

AB BACKTEMANS 3 rolls plate rolling machine Machine is in good working condition Maximum thickness : 30 mm

Sahinler 4RHSS 32-350 Plate rolling machine - 4 rolls Machine is in good condition Side supports Lifting system NC Control

Plate heat exchanger,stainless steel,Alfa Laval type T5-MFG,16 clip plates.

Plate heat exchanger,stainless steel,Alfa Laval P22H-150-L,101 plates.

Plate heat exchanger,stainless steel,intermediate frame,for Sondex type 15-LS.

Plate heat exchanger,stainless steel,Pasilac type 1070,19 plates.

Plate heat exchanger,stainless steel,APV type SR36,92+92 plates,max. 10 bar.

Birlik 3 Rolls Plate Rolling Machine Machine is in very good condition Bending length : 3030 mm Bending capacity : 6 mm Roll diameter : 220 mm Power : 5,5+3 Kw

Manufacturer SMT-Pullmax Kumla Model PV 7 H Year 1982 Working length : 3000 mm Max. thickness : 25 mm

Plate heat exchanger,stainless steel,APV type SR36,56+56 plates,max. 10 bar.

Plates,titanuim,for heat exchanger,GT45D6,G6732

Plate heat exhanger,stainless steel,Alfa Laval type P2-VL,mounted with 80 plates

Plate heat exchanger,stainless steel,APV type H17,10 bar,19 plates

Plate heat exchange,stainless steel,plates for Sondex type 15-LS.

Cylinder faction 4 rollers and width 2 mtr. The machine is located in Spain.

Plate rolling machine - 4 rolls Manufacturer Boldrini Model / capacity 250046 mm Year 1977

Sahinler 4R HS 30-260 4 rolls plate rolling machine Conical bending is also possible Maximum thickness : 15 mm

Plate heat exchanger,stainless steel,Sondex type S15/1G,26 plates