plate bender used for sale

Press modul for production of CLT panels. Used for test production of different CLT and hybrid panels.

Pressure plate bending hatchet PB-S; suitable for Heidelberg Speedmaster 52-105; Floor-standing device. Plate bender axe PB-S; used for Heidelberg Speedmaster 52-105; standing device.

Basic pallets for MAKINO A77 /81 Dimensions 630 x 630 mm with T-slot spacing 125mm Several available !

Sheet stop: 1000mm, max. cutting thickness: 10mm, cutting length: 3000mm, weight: approx. 8500kg. The machine complies with accident prevention regulations. The blades must be turned and reground. The drive motor was replaced 4 years ago. Documentation available. An on-site inspection is possible.

GT-5326 Plate Filter - Brand: CLEVER - Model No.: MSH-47-A-25/30-16-18 - Power: 2 hp (1.5 KW) - With 25 plates of 480 x 480 mm

1 x ZEISS-Stiefelmayer Duplex Measuring System Bauj. 11/1995 1 x Stiefelmayer Duplex Measuring System Bauj. 1985 1 x Stiefelmayer measuring system built in 1987 1 x Stiefelmayer measuring system built in 1987

Mechanical condition: good, with traces of storage. Pneumatic condition: defective, to be redone. Weight: 30 kgs. Mechanischer Zustand: gut, mit Lagerspuren. Pneumatischer Zustand: defekt. Gewicht: 30 Kg

G&J HDX150 ( Kodak T-HDX 1500 )

A panel storage system including a saw is available. 1) Surface storage Becker, year of manufacture: 2011, length: 24900mm, width: 14170mm, stack height: 2000mm, lifting height: 2100mm, max. panel dimensions X/Y: 4200mm/2100mm, min. panel dimensions X/Y: 1800mm/600mm, max. lifting weight: 250kg, travel speed horizontal/vertical: 120m/min/40m/min, stack positions: 38, panel capacity at 20mm panel thickness: approx. 3400pieces. Including saw linkage, offcut handling with automatic measurement and separation device. 2) Panel sizing saw Schelling fh 4, year of manufacture: 2011, max. panel dimensions X/Y: 4100mm/2100mm, max. panel thickness: 60mm, thickness tolerance: 0.2mm, max. saw blade diameter: 350mm, cutting length: 4200mm, feed speed: 80m/min. Including storage linkage, lifting and lowering device, central cleaning system, infeed and outfeed systems and further accessories. This is a  ...

spindle diameter: 125 mm spindle travel: 1130 mm column travel: 6000 mm headstock travel cross: 1700 mm column travel on cross-slide: 400 mm spindle speeds: 2,24 - 450 (27x) U/min volt: 380 V total power requirement: 14 kW weight of the machine ca.: t dimensions of the machine ca.: m Facing head D.R.O. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Coolers for Glunz+Jensen Plate Developing Machines; Model 8735001001; cleaned and tested; suitable for Glunz+Jensen plate development machines. Chiller for plate processors Glunz+Jensen; Model 8735001001; cleaned and checked; used for Glunz+Jensen plate processors.

spindle diameter: 125 mm x-travel: 8000 mm y-travel: 3000 mm spindle bore: 240 mm w-axis: 1650 mm total power requirement: . kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 130 mm x-travel: 5000 mm y-travel: 3000 mm control: Heidenhain TNC 426 taper ISO: 50 P.D.B. w-axis: 900 mm z-travel: 500 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 150 mm x-travel: 16000 mm y-travel: 3000 mm taper ISO: 50 w-axis: 1200 mm spindle speed:: 2,5-1000 ram: 380x380 mm total power requirement: 30 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Plate punching machine 70x100 Brand: Grapho Metronic

plate width: 5000 mm plate depth: 2000 mm plate height: 400 mm total power requirement: kW weight of the machine ca.: 9,2 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Agfa Elantrix 125 SX Plate Developing Machine; cleaned and tested; incl. Scrub Kit; suitable for thermal plates; max. Panel width 1250mm, min.200mm; min. Panel length 300mm; Plate thickness 0.15-0.40; Cooling. Plate processor Agfa Elantrix 125 SX; cleaned and checked; included scrub kit; used for thermal plates; max.plate width 1250mm, min.200mm; min. plate lenght 300mm; plate thikness 0.15-0.40mm; Chiller.

Agfa Elantrix ST 125 SX Pressure Plate Stacker; cleaned and tested; Panel width 300-1250mm; Panel length 275-1470mm; Panel speed 400-2500mm/min.; Printing plate trolley. Plate stacker Agfa Elantrix ST 125 SX; cleaned and checked; plate width 300-1250mm; plate lenght 275-1470mm; plate speed 400-2500mm/min.; plate trolley.

Boring spindle diameter: 130mm, tool holder: SK50, centering: 500mm, travel X/Y/Z: 250mm/160mm/380mm, travel W/U: 1000mm/320mm, feed rate: 2m/min, rapid traverse: 5m/min, max. diameter drilling/facing: 800mm/1400mm, torque boring spindle/facing support: 3100Nm/6150Nm, clamping plate dimensions X/Y/Z: 3500mm/1750mm/350mm, weight: approx. 30000kg, controls: Bosch. Including angle head, extension piece, steep taper tool holder for SK50 (without tools), 4x plate fields with the dimensions 1080mm/2000mm and boring apparatus. Documentation available. An inspection on site is possible.

Granite measuring and control plate MAHR approx. 2,000x1,000x200 mm (LxWxH) TK 00, DIN 876, weight approx. 1,200 kg, base cabinet, without the superstructures and measuring instruments

Offer 26041 Technical data approx.: - Plate length approx. 3000 mm - Plate width approx. 2500 mm - Top height without base approx. 180 mm - Top height with base approx. 810 mm - Thickness of the top plate approx. 115 mm - 11 T-slots in table surface length 1500 mm - Center distance of the T-slots in the table surface 250 mm each - T - groove width approx. 40 / 22 mm - T - groove depth approx. 16 / 24 mm - Space requirements L 3500 x D 2500 x H 1100 mm - Weight approx. 4500 kg

Plate trolley FETRA max. 500 kg with 6 brackets, approx. 80x120 cm, max. bracket height approx. 85 cm

Granite measuring and control plate MAHR 1,200x800x200 (LxWxH) TK 00, DIN 876, weight 576 kg, with 2-door base cabinet

Tetra Pak desserts pilot UHT plant with an pasteurisation, indirect and/or direct (VTIS) heating module @ 225 ltr/h and only a pasteurisation step @ 125 ltr/h, previously used in a R&D centre for desserts., Indirect unit, skid mounted, including:, - Open level tank, serial number: DFB-5259-BT01, year 2008, 50 ltr with propellor agitator (Lightnin ECL-M59-25)., - Feed pump (mono / screw pump, Netzsch, NM031BH02S12H, serial number 387231, year 2007, 120 - 300 ltr/h, speed 20 - 80 rpm, discharge pressure 2 bar, product temperature 5 - 20 °C)., - Lobe pump, Alfa Laval, SRU1/005/LD, serial number 431441, year 2008, motor: 0,37 kW, 400 V, 50 Hz, n1: 1.360 rpm, i: 15,57 n2: 89 rpm., - Heating module A, centrifugal pump: Alfa Laval FM-0/95, serial number: 31457-17997., - Heating module B, centrifugal pump: Alfa Laval FM-0/95, serial number: 31457-17999., - Heating module C, centrifugal pump: Al ...

4 ROLL HYDRAULIC DUAL PRE-PINCH 3000x15 MM PLATE BENDING MACHINE NEW Brand MG model M3015 -Width of plate 3000 mm -Thickness of plate rolling 15 mm -Thickness of plate pre-bend 12 mm minimum bending diameter ID 350 mm Rolls dimensions: -Surface length mm. 3100 -Top roll mm. 290 -pinch roll mm. 270 -Power electric 10 Hp Technical data: -rolls hardened surface high resistance -variable rolling speed -Powered driven hydraulic rolls rotation -conical bending attachment roller type -calibration system re-rolling welded shells -deflection pinch pressure adjustable upon the thickness -overload protect complete safe operation of the machine. -control console on wheels with electric joysticks commands -position readout digital display for rolling memorize and repeat -safety and emergency systems installed -manuals and schematics along with the machine

SALES MANDATE Brunetti Bakershop Air S Convection Oven 6 Trays Capacity: 6 trays (600 x 400 mm) Distance between guides: 75 mm Temperature range: 30 – 260 °C Power: 10.5 kW Voltage: 400 V three-phase Dimensions (L x W x H): 760 x 760 x 646 mm Weight: 74 kg Cooking modes: convection and mixed (with humidity) Electronic control with programs Professional use for bakery and hospitality Condition: Used (Burnt Plate) Not Tested (Burnt Plate) Auction-ID: A7-44748-133

KNITTING PLATE FOR ERIKA REKORD SEMI-AUTOMATIC SIZE 2 30 PCS ( 3 pieces )for all semi-automatic machines size 2 very high quality product made of very durable plastic30 pieces5 mm thickDetails see picture

FORTUNA KNITTING PLATE SIZE 4( 3 pieces )For fully and semi-automatic machines of the manufacturer Fortuna size 4very high-quality productmade of very durable plastic30-piece5 mm thickDetails see picture

KNITTING PLATE Â for ERIKA REKORD BEAN-TO-CUP MACHINE SIZE 2 ( 3 pieces )for all bean-to-cup machines size 2 very high-quality product made of very hard-wearing plastic30-piece5 mm thickDetails see picture

KNITTING PLATE Â for ERIKA REKORD FULLY AUTOMATIC MACHINE SIZE 3 ( 3 pieces )for all fully automatic machines size 3 very high quality product made of very durable plastic30 pieces 30-100g5 mm thickDetails see picture

FORTUNA KNITTING PLATE SIZE 3 ( 3 pieces )the above price is for 3 piecesFor fully automatic and semi-automatic machines of the manufacturer Fortuna size 3very high quality productmade of very durable plastic5 mm thick30 piecesDetails see picture

EBERHARDT KNITTING PLATE SIZE 4 ( 3 pieces )for the Optimat and Piccolo models size 4 of the manufacturer Eberhardt for all fully automatic and semi-automatic machines size 4 very high quality product made of very durable plastic30 pieces 5 mm thickDetails see picture

WP KNITTING PLATE SIZE 3, 22 PCS ( 3 pieces )22 pcs.for all Rotamat and 3/4 vending machines from W&, Pvery high quality product made of very durable plastic5 mm thickDetails see picture

WP KNITTING PLATE SIZE 3, 30 PCS ( 3 pieces )30 pcs.for all Rotamat and 3/4 vending machines from W&, Pvery high quality productmade of very durable plastic5 mm thickDetails see picture

EBERHARDT KNITTING PLATE SIZE 2 ( 3 pieces )for all fully automatic and semi-automatic machines size 2 very high quality product made of very durable plastic30 pieces5 mm thickDetails see picture

KNITTING DISC FOR ERIKA RECORD SIZE 4 30 PCS ( 3 pieces )For fully automatic and semi-automatic machines Erika Record size 4very high quality productmade of very durable plastic30 pieces5 mm thick40-120 grams per dough pieceDetails see picture

EBERHARDT KNITTING PLATE SIZE 3 ( 3 pieces )for the models Optimat and Piccolo size 3 of the manufacturer Eberhardtfor all fully and semi-automatic machines size 3 very high quality product made of very durable plastic30 pieces5 mm thickDetails see picture

 Quail Piccolo  Baking plate / stone slab NEW : 865 mm x 600 mm x 15 mmThickness 15mm Weight 16kgAttention: No shipping only collection. Shipping by forwarding company from 10 pieces on request

Baking Plate / Stone Plate / Oven Plate for Miwe Condo 800x1250x15mm NEWBack Plate / Stone Plate for Miwe Condo Oven Dimensions : 800 mm x 1250 mm x 15 mm Thickness 15mm Weight 30kgwe have other size and assortment in stock Details see pictureAttention: No shipping only pickup. Shipping by forwarding company from 10 pieces on request

Oven plate / stone plate for MIWE Condo NEUMaE : 625 mm x 815 mm x 13 mmThickness 13mm Weight 12.7kgAttention: No shipping only pickup. Shipping by forwarding company from 10 pieces on request

Baking plate / stone plate / oven plate for quail Piccolo 798x670x15mm NEWBack plate / stone plate for quail Piccolo oven dimensions: 798 mm x 670 mm x 15 mm thickness 15mm Weight 16kgwe have other size and assortment in stock Details see picture Attention: No shipping only pickup. Shipping by forwarding agent from 10 pieces on request 

Sales platform made of aluminium checker plate approx. 100x50x8cm (WxDxH), approx. 7 pieces distributed in TV and hi-fi department

Sales gondola steel chrome-plated 1 piece approx. 60x60x80cm (WxDxH)

Baking plate / stone plate / oven plate for quail 600x490x15mm NEWBack plate / stone plate for quail Piccolo oven Dimensions : 600 mm x 490 mm x 15 mm thickness 15mm Weight 9kgwe have other size and assortment in stock Details see pictureAttention: No shipping only pickup. Shipping by forwarding company from 10 pieces on request

Kappel DSH2/12V Vacuum Suction Cups Plate Vacuum Cleaner Glass Metal For lifting up to approx. 1500kg!

Baking plate / stone plate / oven plate for Miwe oven 625x815x13mm NEWBack plate / stone plate for Miwe condo oven Dimensions : 625 mm x 815 mm x 13 mm thickness 13mm Weight 12.7kgwe have other size and assortment in stock Details see pictureAttention: No shipping only pickup. Shipping by forwarding company from 10 pieces on request

Fisher Type: Flash Pasteurizer Year: 1999 Efficiency: 120 Hl

Baking Plate / Stone Plate / Oven Plate for Miwe 625x415x13mm NEWBack Plate / Stone Plate for Miwe Condo Oven Dimensions : 625 mm x 415 mm x 13 mm Thickness 13mm Weight 6.5kgwe have other size and assortment in stock Details see pictureAttention: No shipping only pickup. Shipping by forwarding company from 10 pieces on request

Clamping plate with T-slots and cross table, plate field, welding table, welding table, plate boring machine, T-slot plate, pallet changer -Width: 1250mm -Length: 1595mm - Height: 47mm - Holes: M16 grid 50 x 50 mm -Drilling: 22 mm grid 450 x 400 mm -Plate: without straight edge -Number: 1 piece available -Weight: 700kg

Clamping plate with T-slots and cross table, plate field, welding table, welding table, plate boring mill, T-slot plate, pallet changer -Spare part: Clamping plate is an intermediate plate for a planer, portal milling machine -Wide clamping surface: 1168 mm -Length of clamping surface: 1628 mm -Plate height: mm -Plate: solid -Dimensions: 1345/1725/H462 mm -Weight: 5850 kg