plastic shredder used for sale

Included hydraulic-unit and control panel build in container. With conveyor for outlet.

System includes a Vecoplan shredder, a scraper chain conveyor, and a lifting-tilting device with safety guard, the system was used for recycling plastic, 1) Vecoplan shredder VIZ 1300 S, with hood-type feed hopper, base frame, discharge electrode, scraper chain conveyor, lifting-tilting device, feed length: 1250mm, feed width: 1300mm, type: electric motor with V-belt drive, rated motor power: 90kW, rated motor current: 169A, motor speed: 750/min, protection class: IP55, rotor diameter: 495mm, number of cutting crowns: 87 pcs., dimensions of cutting crowns: 40x40mm, rated rotor speed: 185/min, rotor speed range: 95-265/min, screen hole diameter: 40mm, drive side: right (standard), overall length: approx. 2850mm, overall width: 2515mm, overall height: approx. 1350mm, weight: approx. 7200kg, 2) Scraper chain conveyor, trough width: 500mm, section length: 2700mm, screw diameter: 315mm, screw ...

Manufacturer: ERDWICH Model: M600/1-400 Year of Manufacture: :2022 Condition: As new / barely used Operating Hours: 5 hours Complete machine as shown in the pictures and drawings (including control unit/switch cabinet, feed area, and access platform) Find more here - / Contact us at -

Manufacturer: KOMPTECH Model: Crambo 5200 Year of Manufacture: 2015 Type of Machine : slow-speed shredder Operating hours: Approx. 14,000 hours Condition: - Used, good condition consistent with operating hours - Commercially operated - Regularly serviced and maintained (checkbook service) Chassis: - Trailer / 3-axle chassis, transportable - Road approved - TÜV valid until 03/2026 Engine and drive: - 328 kW / 460 hp diesel engine - CAT engine with mechanical drive - Machine weight approx. 27 t Applications: Suitable for roots, green waste, waste wood, stem wood, organic waste Equipment and features: - Overbelt magnet - Remote control - Armored shredding rollers - Rollers in very good condition with low wear - Fixed tools - Roller speed: 22 rpm / 34 rpm - Screen baskets: 220 mm x 140 mm - Standard paint finish - Throughput up to approx. 80 t/h - 3-axle running gear - Mechani ...

Lindner Jupiter 3200 low-speed single-shaft pre-shredder incl. hydraulic unit and control cabinet Mileage: 54,000 BH Year of Make: 2008 Machine was regularly serviced and repaired Application: Fragmentation of commercial and. industrial waste,

Corrugated cardboard shredders (mats) Type: 55422118 Year of manufacture: 2018

A large-format single-shaft shredder Vecoplan is available. Rotor diameter: 370mm, effective rotor length: 1300mm, speed: 120rpm, knife rows: 37, knife dimensions X/Y: 40mm/40mm, feed opening X/Y: 1400mm/1300mm, hopper volume: approx. 3m³. Machine dimensions X/Y/Z: 3200mm/2400mm/1500mm, weight: approx. 5500kg. An on-site inspection is possible.

Manufacturer: Lindemann Model: Lubre 400t Year of Manufacture: 1990 Condition: good They have already done all service of the machine : - New hydraulic joystick controls for machine operation - New hydraulic oil - New hydraulic hoses and pipes - Hydraulic cylinders for rams - New cutting knives - Remote control for machine movements - New metal electrical enclosures - Find more here - / Contact us at -

Very good condition four-shaft shredder UNTHA RS-30 The machine is located in a container with a discharge belt/articulated belt as a chain belt conveyor. Easy to transport, can be moved with a hook dispenser. Easy access to the container, wide inspection door. A very nice facility in a well-kept condition First Hand Machine! Operating hours only: 4,307 h Year of manufacture: 07.2019 Power: 2 x 11 kW Cutting opening L x W 420 x 560 mm Knife width: 18 mm Built-in strainer: Ø mm Electrical cabinet : complete with control Funnel Discharge belt Containers

Manufacturer: Hammel Model: NZS 1000 Year of Manufacture: 2012 Operating hours: approximately 3,000 hours Undercarriage: crawler chassis (tracked mobile) It has two built-in magnets Find more here - / Contact us at -

Manufacturer: Lindemann Model: LU800 / 8P A60 Year of Manufacture: 1994 Hours: 46,900 (currently still running) - Blade width 80x80 - Box length - Bed dimensions: 5.80 meters long / 2 meters wide - Drive power: 4 motors from Schoch GmbH No. 9140231/9, year 1994, 90 kW each - Lindemann Scissors Find more here - / Contact us at -

A single-shaft shredder Erdwich for contaminant-free red brass and brass chips is available. Cutting unit dimensions X/Y: 600mm/500mm, height: 300mm, knife width: 25mm, screen hole diameter range: 25mm-35mm, machine dimensions X/Y/Z: approx. 1600mm/650mm/800mm, weight: approx. 600kg. Documentation available. An on-site inspection is possible.

Shredder of the leading company LINDNER model: KOMET 1800 single shaft number of knives 50pcs. Ideal for SRF/RDF (paper, plastic, fabric, wood), accompanied by the electrical panel and the control panel. Drive motor: 200Kw ABB 400V/50Hz Hydraulic unit: Dorninger-Heavy Duty 1:65lt/min ,Drive Capacity:11Kw The machine is in excellent condition, being sold due to replacement with a new more advanced model.

Main Machine - ZERMA ZPS 2000 - Type: single shaft shredder (Einwellenshredder) - Drive power: 2 x 55 kW - Frequency converter: included (1 unit) Conveying Equipment Included - Discharge Belt Conveyor - Type: WF 4000 x 2500 x 580 - Drive: 1.5 kW - Inclined Belt Conveyor (mounted at shredder) - Belt width: 980 mm - Centre distance: 5000 mm - Belt type: PVC with cleats - Safety features: emergency stop rope and safety stop - Drive (right-hand): 1.5 kW Spiral Conveyor - Type: HS 450 NW 560 - Manufacturer: BULCOTECH - Drives: 0.75 kW / 11 kW / 5.5 kW / 11 kW Magnetic Separation - Drum Magnet (1 unit) - Overhead belt magnet: DM01.60 - Design: ferrite - Drive: 1.5 kW - For belt width: 600 mm Find more here - / Contact us at -

Manufacturer: HAAS Model: TYRON 1500 E Year of Manufacture: 2014 Machine Type : stationary electric twin shaft primary shredder Tool configuration: special reinforced tooling, 4-part with 7/6 discs per shaft Shaft speed: infinitely variable, approx. 0 to 32 rpm Counter-comb bar: included Raised tipping hopper: included Drive Unit - Drive power: 2 x 90 kW - Central lubrication: for all 4 main bearings Electrics / Control - Display: IFM display - Remote control: radio remote control included - Shredding programmes: 4 pre-set programmes (wood, waste, special, green waste) Discharge Conveyor - Discharge conveyor: included Find more here - / Contact us at -

We are selling a shredding and processing system for printer toner cartridges. The system is also suitable for processing small and medium-sized waste electrical and electronic equipment (WEEE).It was only in operation for five years and has already been professionally dismantled. This shredding and processing plant for toner cartridges was developed to efficiently separate valuable materials and reuse them in the recycling process. Through the use of high-performance machinery and intelligent separation technologies, this line enables the sustainable and economical recovery of metals and plastics from toner cartridges.The process consists of several stages: First, the modules are shredded, then sorted and finally separated in order to optimally process the different material fractions. Machines and processes of the plant. 1. Feed dispenser with big bag unloading station – length 5  ...

A Burghardt cardboard shredding machine is available. Cutting width: 320mm, max. cardboard thickness: 12mm, throughput capacity: approx. 2m³/h, operating speed: 10m/min, motor power: 0.75kW, machine dimensions X/Y/Z: approx. 500mm/600mm/650mm, weight: approx. 100kg. Documentation vorhanden. An on-site inspection is possible.

AGICOM recycling machines: Used single-shaft shredder MR2260 The used single-shaft shredder MR2260 is a powerful and energy-efficient shredder for the pre-shredding of cables, electronic waste, waste plastics, wood and much more... It has two stator knives for better product quality and higher hourly output. The shredder is equipped with an electronic control system. This monitors the hydraulic feed and the cutting shaft. As a result, the single-shaft shredder rarely has to reverse and retains its high throughput. Cooling is included. Year of manufacture: 2019, Machine in good condition. Ready for immediate use! Number of blades: 23 + 2 (rotor + stator) Rotor length: 600 mm Electric motor: Siemens 19.0 kW + 2.2 kW, 400 V Control: Siemens Dimensions: approx. 1750 x 1300 x 1800 mm Capacity: max. 200 – 400 kg/hour Safety: retraction of the feed in the event of overload, re ...

Chopper / universal / mill NAGEMA-FeumaProduct descriptionManufacturer: Nagema VEB Feuma GössnitzType: HU-1Year of construction: 1981Condition: used, baker's conditionOn wheels, mobileDetails see pictures.

Food processor / universal - food processor NAGEMA HU-1 Product description Manufacturer: Nagema VEB Feuma Gössnitz Type: HU-1 Year of construction: 1982 Condition: used, bakery condition On castors, mobile Details see pictures.

Goose neck shaped conveyor belt, Dimensions : 3,5 m. on floor mm. 2,2 m. horizontal + 1,18 m.inclined Angle 45° 1.166 mm discharging point, machine as new, used for test only Approx.450 mm working width Complete with transport paddles 1,5 kw gear motor Fitted with a 250 mm diam.magnetic drum at the end. Separate discharging outlet for extracted ferrous material, This machine was mounted under a 1500 WLK shredder, conditions: as new, type: extraction belt

ID3749 Doppstadt Inventhor 9 year/Baujahr 2019 approx. 4.180 hours/hours 32 t Pre-shredder, roller length 3,000 mm Pre-shredder, roller length 3,000 mm

Cutting sieve, shredder sieve, sieve basket, sieve for chopper, shredder system, single-shaft shredder, shredder, granulator, shredding machine -Perforation: 65 x 65 mm -Recording holes: Ø 75/30 mm -with supporting ribs -Drawing with the pictures -Dimensions: 1600/1844/H620 mm -Weight: 696 kg

agicom recycling machine trade: The used single-shaft shredder from Tecnoecology is extremely powerful and is ideal for shredding cables, but also for composites and plastics. Equipment: hydraulic pusher. Number of blades: 7+8 (rotor + stator) Rotor speed: 130 rpm Cutting rotor: Ø 180 mm - 500 mm Electric motor: 17.0 kW, 380 V Weight: approx. 1,200 kg Dimensions: approx. 1540 x 1150 x 1700 mm Throughput: max. 200 - 400 kg/hour Safety: retraction of the feed in the event of overload, reverse rotation of the rotor in the event of blockage

Shredder for waste wood and biomass, 2-stage ( stage 1 = Doppstadt DW 3060 buffalo ---- level 2 = AK 630 ), 2 large magnets INCLUDED, air classifier on the discharge belt included. Completely ready for use. Engine (Volvo approx. 700 hp / 515 KW

Bio shredders/ mixers Seko Constellation 6000/200ME Electrically powered stationary organic shredder/mixer for processing garden waste, cellulosic waste, organic waste, market waste, green waste, etc. for composting Power: 180 KW Total weight: 11,100 KG Basic equipment: • Branch gearboxes with planetary gearboxes and electric motors • With control console to start the machine at full load • Automatic gearbox control and reversal of the chopping unit • Hopper made of wear-resistant steel • Spiral chopping shafts made of wear-resistant steel • Chopping blade made of high-strength steel • Replaceable, adjustable counter blades made of wear-resistant steel • Retractable discharge belt, discharge height up to 3m Condition of the machine The machine is in good technical and visual condition. Warranty: The machine will be sold in the condition existing ...

TECHNICAL DATA: Hopper opening: 700 x 360 mm Installed power: 15 kW Rotor: 600 x Ø 252 mm

BANO UNIMAC 180/70CP Mod.S, reinforced structure Hopper: 1.830 x 1.300 mm, Hopper capacity: 2.340 lt. 132 KW a.c. drive Rotor: 1.700 mm wide Rotor diam.: 660 mm. Rpm: 80-140 Outer diameter: 700 mm. Outer length 1800 m. Rotor knives: 60×60 mm. Screen: 30 mm. (or bespoke) Ram stroke on 600 mm. Side ram + upper ram Hydraulic pack Dimensions LxWxH: 2400x3600x2450 Construction year 2005 The machine is offered totally and professionally reconditioned (images show the machine once reconditioned) User manual + drawings + CE, installed power - used power in work: about 60-65% : 132 kW, conditions: Reconditioned, availability: 40 days ca from confirmation , type: Single shaft

GOOD CONDITION SHREDDER type TEREX Ecotec TDS 820, good condition Year of construction 2020 Only 2700 hours Weight 27500 kg

- Shredder EUREC S 20.00 D - Year of construction 2008 - Ready for operation - with spare parts

Twin-shaft shredder, 380 volt power supply, ideal for plastic, wood, iron chips, paper. Loading mouth 620 x 570 mm, working area 350 x 300 mm, never used 0 hours Overall dimensions: 1500 x 1000 x 1500 mm Weight: 1000 kg MACHINERY WITHOUT CE MARKING, NOT COMPLIANT WITH EU DIRECTIVES, INTENDED EXCLUSIVELY FOR NON-EU MARKETS Auction-ID: A7-45834-56

Twin-shaft shredder, 380 volt power supply, ideal for plastic, wood, iron chips, paper. Loading mouth 620 x 570 mm, working area 350 x 300 mm, never used 0 hours Overall dimensions: 1500 x 1000 x 1500 mm Weight: 1000 kg Auction-ID: A7-45834-138

Petrol vacuum shredder STIHL SH86, nameplate not traceable

Code: 0369 Brand: ISVE Model: 25/66 Rotary blade grinder for wood scraps, plastics, packaging, nut shells, fruit stones and pits, leather scraps, wood bark, loppings of trees, and other materials Motor Hp 7,5 (Kw 5,5) Inlet opening diameter mm 250 x 660 It can be connected to a dust collector using a tube placed under the screen Overall dimensions: mm 930 x 770 x 1800 h Weight kg 680

Cabbage shredders S65 Cabbage cutting machine 2020, Stainless, cabbage shredding machine, with two top mounted de-stalkers, 5000kgs - 7500kgs per hour, disk diameter 650mm can be used for whole large cabbage heads, mobile, 3Ph

Document Shredder REXEL 60X, S/N PM2013000946

Rotor shear Loaded freely in working order. Cutting table weighing 25.5 tons 270 kw power

Weima Type: ZM 30 Motor 2x 11kW Hours: 1243 Feed size at the bottom approx. 500x450mm Hopper at the top approx. 1m x 1.2m Transport Dimensions Height 2m, Width 1.6m, Depth 1.6m Weight approx. 1400kg We have been engaged in the sale of woodworking machines for 25 years. Our machines are 100% inspected before sale, and we attach great importance to the satisfaction of our customers. You are welcome to visit and try out the machines in advance to convince yourself of their quality and functionality. If you have any additional questions, please feel free to give us a quick call or send us a message. Net price plus VAT

JBF UC 47 Shredder Motor 7.5KW Cutting shafts approx. 47cm long x 50cm wide Low-speed manufacturer, German manufacturer Weight approx. 1t Long 1.90cm High 2.30cm Wide 1.10cm We have been engaged in the sale of woodworking machines for 25 years. Our machines are 100% inspected before sale, and we attach great importance to the satisfaction of our customers. You are welcome to visit and try out the machines in advance to convince yourself of their quality and functionality. If you have any additional questions, please feel free to give us a quick call or send us a message

Suitable for metal chips Auction-ID: A1-41995-13

Designation: RTE shredder Condition: New Auction-ID: A1-45887-62

PPC Recycler Offered: robust and powerful mobile industrial shredder from the brand Peterson (Astec), type HS4400-B. This machine is suitable for professional use in recycling, green processing and biomass production. The shredder is mounted on a 3-axle trailer chassis and is therefore easy to transport and can be used flexibly on site. Equipped with a spacious infeed hopper and discharge belt for an efficient and continuous material flow. Applications: Wood and prunings / Green waste / Tree trunks / Biomass Features: Heavy-duty industrial version / Large input capacity / Discharge belt available / Mobile setup (trailer) / Suitable for professional use Condition: Working (see video) / Used with normal wear and visible signs of wear / Service history unknown This machine is ideal for recycling companies, green processors, contractors and export. The working condition and complet ...

VREDO Self-Propelled Trac – Wood Processing / Infeed System General data: Manufacturer: Vredo Machine type: Self-propelled processing unit Year of manufacture: 2012 Equipment: FTG 400 infeed crane with tree clamp 3x infeed rollers Folding hopper Wear plate blow pipe Description: Self-propelled VREDO Trac unit equipped with infeed crane and wood handling system, designed for forestry or biomass processing applications. The machine enables efficient feeding, gripping, and processing of logs or branches, making it suitable for wood chipping, shredding, or biomass preparation operations. Auction-ID: A7-40553-27

Transmission PTO drive Cardan shaft with protection Central multiplier box Belt drive protected under side housing Rotor & Cutting Horizontal Flail Rotor Front Splash Protection Reinforced steel housing Structure Reinforced one-piece chassis Adjustable side glides Dimensions Overall width: ≈ 1,750 mm Depth: ≈ 850 mm Height: ≈ 800 mm Actual working width: 1,600 mm Weight: 367 kg Auction-ID: A1-45887-110

Applications: Plastics, fabrics, wood chips Operating hours: 50 h Status: Good overall condition Auction-ID: A1-45887-130

Wood Shredder BHS Manufacturer: Type: NGU 0513 Year of Make: 2017 Betriebst. 12000 h Knife: Rotor diameter 495 mm with 87 knives Hopper 14 cbm Screen baskets 20mm 30 mm Control cabinet Weight: 9500 kg L-2.75m B-3.25m H-1.75m Inlet: 2.20 x 0.50 m Location: Salzgitter Price ex location 49,000,-- Euro plus VAT I offer as an intermediary on behalf of the owner. The information is non-binding, the prior sale is reserved. Dismantling, loading and shipping on request! I am happy to answer any further questions you may have. Wilfried Goldmann +49 173 6242 600 ( WhatsApp )

Machine type: Slow speed shredder Manufacturer: DOPPSTADT Model: DW 2560 Serial number: 0900DW218V09427 Year of manufacture: 10/1995 Gross weight: 18,000 kg Equipment: - Feed hopper - Discharge conveyor belt - Control panel on side - Twin axle trailer chassis - Tow bar Condition: - NOT-working - Visible wear, corrosion and paint damage - Conveyor belt shows signs of usage - Interior shredding chamber worn Remarks: - Mobile shredder for wood, green waste and bulky materials - Trailer-mounted unit - Ideal for recycling and waste processing applications - Inspection recommended Own mass: approx. 18,000 kg Auction-ID: A7-45990-32

Disc Wheel Shredder for Grass Wood ec. YOC 1995 130 Kw motor incl. Feed belt Discharge screw Pedestal Knife sharpener

Hammers Input carpet Working condition and performs everything that needs to be done Auction-ID: A3-43534-11951

ALL PURPOSE STURDY 4-SHAFT SHREDDER 1500 mm.134 kW, for plastics, cardboard, paper, cables and more, This is a versatile 4.shaft shredder, a new machine engineered to offer the best possible results in size reduction of various materials., Constructed entirely in Italy, according to the latest safety regulations with top quality materials and components., Reliable, evergreen, economic, this machine comes from our long experience in size reduction., Service is available with us and our 24/7 post-sale assistance guarantees that you will never be let down., Rotor width 1.500 mm. Shredding chamber :1.500 x 1.200 mm Motors power 2x45 kW + 2x22 kw kW (or bespoke to project), Knives: bespoke to project (eg.30+30 50 mm thick, 2 hooks), screen : 50 mm holes (or bespoke to project), Electrical control system Siemens S7 PLC control, control cabinet with PLC Siemens S7, Sturdy supporting structure,  ...