132,119 used machines on RESALE, but how to find them? Machine Search
P427 - used approx. 30 m³ / 30,000 litre HDPE tank, plastic tank, double-walled, flat-bottom tank. Technical details: Content: approx. 30 m³ / 30,000 litres Material: HDPE tank, plastic tank Manufacturer: Formoplast Specific gravity: min. 1.55 kg/L Dimensions: approx. Ø 3.49 m × H total approx. 5.50 m Certification mark: PA-VI 321.103, AHL/ASL listed Other: Used HDPE tank in good condition, inside professionally cleaned, from the outside as shown in the pictures. Above-ground storage tank for outdoor installation, standing on flat floor, double-walled with outer tub, dome on top of the roof, several inlets and outlets, opaque, incl. railing on top of the roof. Only the pure tank is sold, without add-on parts such as pipes, fittings and accessories. If the ladder fits on the truck, it can be supplied. This container can be used as a storage tank for many different media ...
Spare parts for Battenfeld injection moulding machines The parts are 100% original and functional, and above all, much cheaper than new parts • Control units •Screens • Pressure transducer • Smart cards •Modules •Power supplies •Switches •Keyboard • Temperature controllers • Amplifier Cards •Transducers • Pressure switches • Hydraulic motors • Hydraulic pumps •Manometers • Oil coolers • Proportional valves • Safety valves • Directional valves • Water faucets
Card packaging system CR80/ISO7810) formats (e.g. telephone cards). The plant can wrap the cards individually in foil and also form a chain with 50 cards. In the end, the cards are automatically packed as a block. A camera is used to record a code for quantities and product control. Details: High-speed packaging machine for CR80/ISO7810) formats • Output up to 700 products/minute • 4-sided ultrasonic weld seam • High-speed feeder with servo motors for reliable separation • Chains of 5, 10, 15, 20, 25 to 50 as well as single cards. • 2 feeder feeders for card and insert • 2 camera systems from Quali Vision, for checking the sequence and in the outer packaging for labeling • Windows 2000Professional as a production system • Paternoster for destacking in the zig-zag process • Cross transport on outer packaging machine • Marden Edwards Series 4 LX12 ...
Chip press for the recycling and compaction of plastic chips (which are shredded if necessary) from machining by converting them into cylindrical briquettes. When it comes to disposing of PU or EPS chips, the Styrotec briquetting press saves a lot of money and increases profits by turning waste into a resource. The chip press can be installed both indoors and outdoors. Briquette diameter: 55 mm Hopper dimensions (diameter): 1000 mm Throughput: 30-75 kg/h Motor pump power: 5.5 kW Dimensions of the briquetting press: 1,100 x 1,460 x 1,600 mm Weight: 565 kg
43 rolls of 3,048m each 19 rolls of 3,048m each, both chain types identical, only slight colour difference brown/light brown new, original box Price per m
9 rolls of 3,048m each Price per m new, partly original packaging
1700 : EL 400 30 pcs. DM 50 Steel axle M8 i 1100 : EL 470 100 pcs. DM 50 Steel axle 10mm Price per piece / as good as new
new 12 pcs. 1525 x 600 rubberized 2 pcs. 700 x 600 rubberized 1 pc 1400 x 600 rubberized Price per m
Suitable for steel and plastic strapping, electro-galvanized, very robust and stable design, including a shelf and brake. Suitable for steel and plastic strapping Core diameter 406 mm, belt width 9-19 mm Core diameter 406 mm, belt widths 9-19 mm
Roll-off trolley for plastic belt, light version
In various shapes and sizes in position. Auction-ID: A1-45979-83
Year: 2015 - technically efficient, ready to work – after full service - working dimensions: 2800 x 1350 mm - tilting stop pins - pneumatically tilted - sliding/brush strips - pneumatic gun DGS 3100 - pneumatic screw feeder ASS 60
Complete Britas filter with many spare parts. Off site, available immediately.
This KIEFEL KLS 86/235 was manufactured in 2011. It features a maximum forming area of 860 x 2350 mm and a maximum forming part height of 350 mm. The machine is equipped with a powerful vacuum system with a suction power of 2 x 300 m³/h. If you are looking to get high-quality laminating capabilities, consider the KIEFEL KLS 86/235 laminating system we have for sale. Contact us for further details.
This 3-axis Stratasys Fortus 450mc was manufactured in 2018. It features a working area with an X-axis width of 406 mm, Y-axis depth of 355 mm, and Z-axis height of 406 mm. The machine supports a variety of materials including ABS-M30, Nylon 12, and ULTEM. If you are looking to get high-quality 3D printing capabilities, consider the Stratasys Fortus 450mc machine we have for sale. Contact us for further details.
Fully automatic cross strapping line Mosca RO-TRI-5 & RO-TR500-4 Condition: overhauled, serviced, fully functional, ready for use Equipped for 5 mm polypropylene strapping Equipped with a baler Output approx. up to 36 packets/min Speed table hinges infinitely adjustable Tape feeding and tape insertion into frames automatically Welding system: Heat wedge welding/welding tongue
This 3-axis Stratasys Objet260 Connex 3 was manufactured in 2017. It features PolyJet multi-material 3D printing technology and has a material capacity of 8 slots, including 6 model slots and 2 support slots. The machine is equipped with an external material cabinet and is certified with CE, FCC, and EAC markings. If you are looking to get high-quality 3D printing capabilities, consider the Stratasys Objet260 Connex 3 machine we have for sale. Contact us for further details.
On 1 stack, total size as shown approximately 3500x1500mm. Auction-ID: A1-46553-88
Submersible Pump, Chemical Pump, Water Pump, Centrifugal Pump STÜBBE Type: ETL 50-160 Submersion Depth: 570 mm Pump Foot: Ø 350 mm Dimensions: 1100 x 550 x 550 mm Material: PP - FPM
Stackable, tank is damaged Auction-ID: A1-46553-75
Submersible Pump, Chemical Pump, Water Pump, Centrifugal Pump DIETZ-MOTOREN KG Type: FDR 90 L/4P Submersion Depth: 520 mm Pump Base: Ø 240 mm Motor: 1,5 kW 220 / 380 V 1430 rpm Dimensions: 840 x 290 x 330 mm
2000 HAIDA INTERNATIONAL D-E 702-3000K40 Testing chamber Find more here - / Contact us at -
Transport belt, s/s frame, plastic mesh belt, belt width: 2400 mm, total dimensions: 2800 mm x 2500 mm x 1550 mm.
53 plastic pallet boxes, dimensions: (53x) 1160 mm x 1000 mm x 730 mm.
8 plastic pallet boxes with large amount of spreading hooks, dimensions: (8x) 1200 mm x 1000 mm x 700 mm.
Submersible Pump, Chemical Pump, Water Pump, Centrifugal Pump DIETZ Type: FDR 90 L/4P Submersion Depth: 480 mm Pump Base: Ø 245 mm Flange: Ø 480 mm Motor: 1,1,000 mm 5 kW 220 / 380 V 1430 rpm plastic housing Dimensions: 780 x 310 x 300 mm
14 plastic pallet boxes with large amount of spreading hooks, dimenions each hook: 550 mm x 260 mm x 100 mm, total dimensions: (14x) 1200 mm x 1000 mm x 800 mm.
Itec / Attec transport belt, plastic mesh belt, belt width: 200 mm, total length: approximately 40 meters.
Stainless steel plastic work table PAGUS table surface: 1270 x 590 mm with perforated grid ! stainless steel frame ! replaceable shelf cable duct at the back Dimensions: 1300 x 700 x 790 mm
8 plastic pallet boxes with large amount of spreading hooks, dimensions: (8x) 1200 mm x 1000 mm x 700 mm.
8 plastic pallet boxes with large amount of organ hooks, dimensions each hook: 1600 mm x 265 mm x 150 mm, total dimensions: (8x) 1200 mm x 1000 mm x 730 mm.
2016 HR(RUDHOLZER) Warmnietanlage Plastic welding machine Dedicated equipment for JQ specific process, machine was functional before conservation, for reuse is neccesary aditional checks and possible repair activities. Find more here - / Contact us at -
Key data: 50 , 1 , 14
Manufacturer: Battenfeld Type: Microsystem 50 Year of production: 2000 Control: Unilog B4 Closure Type: Knee Closing force: 50 kN Maximum mold dimensions: 196 mm x 156 mm Plate Size: 196mm x 364mm Tool height: min 100 Opening Distance: 200mm Maximum distance between plates: 300 mm Screw: 14mm Stroke Volume: 1.1 ccm / 1 gram PS Injection pressure: 2500 bar General Total power: 2 kW Dimensions: 1.9 m x 0.8 m x 2.4 m weight: 1100 kg On-screen text: German Accessories: • Rotary table, • Robot integrated with the machine, • Fully electric injection molding machine, • Quality monitoring module, • Cleanroom module, • In-mold pressure control • Quiet operation of the machine • Additional 14 mm auger
Lying on 1 pallet Auction-ID: A1-46604-443
Key data: 1300 mm, 117 , 35
Producent: Arburg Typ: 470 S 1300 - 350 Rok produkcji: 1999 Sterowanie: Selogica Typ zamknięcia: Hydrauliczny Siła zamykania: 1300 kN Rozstaw prętów: 470 mm x 470 mm Rozmiar płyty: 650 mm x 650 mm Wysokość narzędzia: min 275 mm Odległość otwarcia: 575 mm Maksymalna odległość między płytami: 850 mm Śruba: 35 mm Objętość skoku: 139 ccm / 117 gram PS Ciśnienie wtrysku: 2500 bar Ogólne Silnik: 22 kW Ogrzewanie: 8,8 kW Wymiary: 4,5 m x 1,6 m x 2 waga: 5100 kg Tekst na ekranie: niemiecki Dodatkowe wyposażenie/wyposażenie Rdzeń ciągnący: x1 Euromap Gorące strefy
maximum number of results exceeded
please refine your search
25 € 
