plastic punch machine used for sale

1250 x 2500mm with SheetMaster loading/unloading - Lots of tooling

Offer 22523 Specifications: - Pressure capacity at 10 bar 35 KN - Plunger stroke 12 mm - Projection 95 mm - Installation height approx. 134 mm - Table size approx. 230 x 190 mm - Air consumption per stroke 8.0 l - Air inlet 6 - 10 bar - Space requirement approx. W 520 x H 1450 x D 600 mm - Weight approx. 100 kg - with: - Foot switch - Pressure gauge + pressure regulator - 4 x punching tool

Offer 22526 Specifications: - Pressure capacity at 10 bar 35 KN - Plunger stroke 12 mm - Projection 95 mm - Installation height approx. 134 mm - Table size approx. 230 x 190 mm - Air consumption per stroke 8.0 l - Air inlet 6 - 10 bar - Space requirement approx. W 520 x H 1450 x D 600 mm - Weight approx. 100 kg - with: - Foot switch - Pressure gauge + pressure regulator - 4 x punching tool

Table load:                      150 Working area X Axis:             1300mm Working area Y Axis:             1300mm Working area X Axis with override:10000mm Punching force:                  30T Maximum sheet thickness:         0,6 - 8mm Auto indexing positions:         1 Length:                          2240mm Width:                           3630mm Height:                          2500mm Weight:                    ...

Gebr. SCHLEICHER mitre punch mechanical foot actuation Table support left + right Weight: approx. 50 kg from location

AMADA EM 2510 NT Turret punching (year 2012) AC servo Direct twin drive Punching hours: 14271 h Machine on hours: 29580 h Excellent maintenance Punching force: 200 kN Work field: 1270 x 2500mm With replacement: 1270 x 5000mm Thickness max. of the material: 3.2mm ( ST-400N/mm2 ) Maximum material thickness: 3.2 mm. (brush table) Swan neck: 1,310mm Max weight of the piece: 50kg (F4) 150kg (F1) X-axis feedrate: 100m/min Y-axis feedrate: 80m/min Control: Amada AMNC-PC RS-232C serial interface Simultaneous axes speed: 128m/min Turret traverse speed (bidirectional): 30 1/min Max cadence punching with dies VACUUM” (hit rate): 500/min (5mm stroke, 25.4mm pitch) 780/min (5mm stroke, 1mm pitch) 1800/min (1.4mm stroke, 0.5mm pitch) Stroke length: 36 mm. Punching accuracy: ±0.07mm C axis speed: 60 rpm Stations: 45 of them 4 AMADEX Diameter max. tool: 114.3mm Tool change  ...

max. format 34 x 46 cm Year of construction: 1954 Hot foil stamping machine 1 Slide preference 1 heating plate Delivery date: immediately Price on request. We deliver and install worldwide!

Nibbel, stamping and forming center with C frame (C – Frame stress-free annealed before mechanical processing – 15-year warranty on freedom from cracking) All with one machine: Nibbling – Stamping – Forming – Embossing – Tapping – Marking – Deburring Servo-electric punch head drive - up to 950 strokes per minute, adjustable depending on the material feed speed. Maximum punching force 300 kN Maximum sheet thickness 6.5 mm Largest workpiece weight 200 kg Machining area 1,500 mm x 4,000 mm (with repositioning up to 8,000 mm) Punching head with FANUC® drive - Programmable: - Punching stroke - Punching depth - Punching speed and - Stamping tool acceleration Tool magazine for 15 pieces up to optionally 150 pieces indexable tools Indexing accuracy 0.01° On request, the machine can be supplied with a TRUMPF® tool system Patented vertical tool magazine ...

Tartellette machine / floor punching machine Peerless Model: OMatic Floor-standing machine with 5 moulds Machine with adjustable step heating for punching head. For molds: Upper diameter: 120 mm Bottom diameter: 115 mm Height: 20 mm Mass: Width: 800 mm Depth: 800 mm Height: 1900 mm Condition: very good, mechanically tested, ex service

BOSCHERT COMPACT 1250 ROTATION-INDEX punching machine was manufactured in 2014 in Germany. The machine, used in precision nibbling, punching and stamping of workpieces, is characterised by excellent stability and rigidity even during demanding series machining. Workpieces with a maximum thickness of 10 mm are machined with a force of 28 tonnes on a large brush table, protecting sheet metal surfaces from scratches and scrapes. The punching tool head is equipped with a ROTATION tool station drive, which smoothly rotates each punching tool in a range of 360°, guaranteeing fast and trouble-free machining of even the most complex shapes. The punching machine is also equipped with a BOSCHERT einfach besser TFT control panel with an intuitive BOSCHERT CNC 32050 CNC controlle for programming machining modes and controlling the machine operation. The total weight of the machine is 8400 kg.  ...

Inv. Num. : 6731 Type: CX 1000/30 Producer: EUROMAC Created: 1999 Parameters: Compressive force: 30 t Maximum lifting speed: 200 mm/s Feed length X-axis: 2000 mm Feed length Y-axis: 1000 mm Stroke: 60 mm Machine height: 1800 mm Machine length: 4000 mm Machine width: 2800 mm Machine weight: 5250 kg

Heidelberg KSB, Year 1964 400x570 mm (15.7x22.5") Standard used for die-cutting Available: at short term

Eccentric punching machine HAULICK + ROOS type RVD 125 double column - eccentric press machine No. 212560 Year of construction 1981 Compressive force 125 ton. Table size: 880 x 800 mm, table opening: 470 x 140 mm, stand width: 900 mm, lateral column width: 415 mm, ram stroke: 45 mm, ram adjustment range: 0-80 mm, installation height in the picture: 340 mm , stroke rate: 50 to 300 strokes/min. Engine power main drive 22 kW Mains connection 380 volts, 50 Hz - Double connecting rod engine with 4-bearing eccentric shaft for off-center ram pressure Load - adjacent electrical cabinet - NC roller feed EBU, width 250 mm, year of construction 2003 - adjacent control panel for the roller feeder - strip running direction from left to right Space requirement (press) L x W x H 3000 x 2000 x 3020 mm Transport height 2950 mm Weight of the press about 11 ton.; used

Table punching machine Renz DTP 340; good condition; cleaned and tested; Tool 2:1 rectangular 5.5x3.5mm; Format max.340mm; Punching thickness max.3.5mm. Desktop punching machine Renz DTP 340; good condition; cleaned and checked; tool 2:1 oblong 5.5x3.5mm; size max.340mm; Punching Thikness max.3,5mm.

Punching machine, MAWA model Compact 750. In good condition. Rated power: 41kVA Nominal voltage: 400V Control voltage: DC24 V Circuit diagram E-15207 Rated current: 60 A Input fuse: 63 A Machine warehouse in warehouse in Poland, 55-300 Środa Śląska If necessary, additional photos or videos or if you are planning a visit to check our equipment, we invite you. Possible organization of transport, the cost of transport covered by the buyer. Person: Michal Pienio Production Manager UAP-2 marketing2.legnicafaurecia.com FAURECIA Legnica Decoration Plant, Interior Furnishings 180 Gniewomierz 59-241 Legnickie Pole – Poland M+48660719841 Faurecia Legnica Decorations S.A. . Gniewomierz 180, 59-241 Legnickie Pole, entered into the Register of Entrepreneurs of the Court Register kept by the District Court for Wrocław-Fabryczna in Wrocław, IX Commercial Department  ...

5018 – PNEUMATIC PRESS, PUNCHING, FERRULE DEVICE Manafacture: Sepalumic Model No.: ZA00069 SH0011B Dimensions: 900 x 350 x 1 100 mm Operating pressure: 6 bar

• Description: Versatile punch with many inserts • Power: max. pressure: 35t • Working height: approx. 1000 mm • Dimensions: 1350 x 850 x 1724 mm • Weight: 1540 kg • In operation since: 06.1998 • Accessories: Trolley with many suitable tools

Heidelberg KSB, Year 1969 400x570 mm (15.7x22.5") used for die-cutting Standard Available: at short term

Reference ID: PP-35200 Category Flatbed Die Cutter Manufacturer: Heidelberg Model Promatrix 106 CS Year Built 2021 Speed 8000 sheets/h Max. Size 760×1,060 mm Min. Size 300×350 mm Condition Very Good Location Europe Availability December 2023 Machine Description Processing of cardboard up to 2,000 g/m² Stripping Station 1. Register system 2. Integrated quick release systems for everyone ools (top, middle, bottom) 3. Fine adjustment of the tools Position indicators 4. Test sheet removal 5. Electronic sheet monitoring 6. Preparation table (option) Tray (CS only) 1. Non-stop roll cloth 2. Pneumatic flap for 3. Test sheet removal 4. Sheet format setting with 5. Position indicators 6. Motorized brake brush 7. Braking force adjustment 8. Strip insertion device (option) 9. Gripper edge separation (option) Non-stop investor 1. Suction head for paper, cardboard  ...

EUROMAC MTX INDEX 1250/30 punching machine was manufactured in Italy in 2008. The machine used for punching in various types of sheet metal, achieves the highest precision and accuracy in machining, thanks to its capacious turret head and high press force of 30 tonnes. The process is performed on a large brush table, which significantly reduces noise level and protects the workpiece surface from scratches and nicks. The EUROMAC 1250 hydraulic punching machine is controlled via a FabriWIN CNC 68 controller with many useful functions. For transport of the machine, tables 4,5,6 are removed and the holding bar is rotated by 90°. Technical specifications of EUROMAC MTX INDEX 1250/30 punching machine - press force: 30 t - feeds in X axis: 1250-2000 mm - feeds in Y axis: 1250 mm - automatic repositioning in the X axis: up to 10000 mm - working speed (cutting, stroke 20 mm): 780 1/min  ...

HEIDELBERG OHT SNR: 133501N YEAR: 1961 SIZE: 26 X 38 CM EQUIPMENT: CHASES (2) - HEIDELBERG PRINT-AUTOPLATEN - SHEET FORMATS MIN 40X70MM / MAX 260X380MM - PRINT-/ CUTTING FORMAT MAX 260X350MM - MAX SPEED = 5.500 SPH - EQUIPPED WITH INK UNIT - OIL DRIP TRAY - WEIGHT = 1.100 KG - W168 X D124 X H158CM - 380V/400V - 50HZ - 1.3 KW

cutting and hot foil stamping machine NB of Heating Zones: 6 NB of Pull Programs: 3

TRUMPF TruPunch 3000-1300 (S11) punching machine was built in Germany in 2013. The reliable machine with extensive equipment and modern components offers its user unparalleled precision and accuracy in machining both thick and thin sheet metal. In addition to standard punching and marking, the punching machine also allows fast grooving, surface embossing, forming and chipless threading in stainless steel, structural steel and aluminium. On the machine’s sturdy and welded C” shaped structure, sits a specially designed brush table with integrated balls, designed to facilitate the loading and unloading of workpieces. The use of this type of table prevents scratches and nicks from appearing on the surface of the sheet, which results in a significant increase in the quality of the machining. During the entire production process, the sheet is held rigidly by hydraulic clamps fixed to th ...

ROTOFLEX VLI 330 Punching, winding and packaging machine in top condition Completely overhauled. Spare parts warranty Includes 13 magnetic cylinders Warranty

Key data: 22 kN, 6 mm, 3000 mm

TC500 built in 1998 and 1999 2x available Partially overhauled with tools Working area y160 x3000 Bosch control system with graphics programming Tool changer 21 stations (with multitool up to 60) Further service by us BST - Punching machines possible Invoice with VAT Phone Support at BST - Finnentrop (Sauerland) Attention, with us you not only buy a good tested machine, but also the right service

Key data: 22 kN, 6 mm, 2500 mm

TC500 YOC 19995 Partially overhauled with tools Working area y1300 x2500 Bosch control system with graphics programming Tool changer 20 stations (with multitool up to 60) 2X available 1x1995 and 1X1993 Further service by us BST - Punching machines possible Invoice with VAT Phone Support at BST - Finnentrop (Sauerland) Attention, with us you not only buy a good tested machine, but also the right service

Key data: 18 kN, 4 mm, 2000 mm

TC120YOC 1992 Partially overhauled with tools Working range y1000 x2000 with resetting Bosch control system with graphics programming Tool changer 9Stations /2Claws Further service by us BST - Punching machines possible Invoice with VAT Phone Support at BST - Finnentrop (Sauerland) Attention, with us you not only buy a good tested machine, but also the right service

Key data: 24 kN, 6 mm, 2750 mm

TC260 YOC 1990 Partially overhauled with tools Workspace y1300 x2750 Bosch control system with graphics programming Tool changer 10 stations (with multitool up to 60) Further service by us BST - Punching machines possible Invoice with VAT Phone Support at BST - Finnentrop (Sauerland) Attention, with us you not only buy a good tested machine, but also the right service

Key data: 24 kN, 6 mm, 2750 mm

TC260 YOC 1990 Partially overhauled with tools Working area y1600 x2750 Bosch control system with graphics programming Tool changer 10 stations (with multitool up to 60) Further service by us BST - Punching machines possible Invoice with VAT Phone Support at BST - Finnentrop (Sauerland) Attention, with us you not only buy a good tested machine, but also the right service

Book spine punching machine Schmedt Präcut HHS 6501; good condition; cleaned and tested; Block height max.350mm; Block thickness max.90mm; 3 knives. Book block spine machine Schmedt Präcut HHS 6501; good condition; cleaned and checked; max.block hight 350mm; max.block thikness 90mm; three knives.

: gebraucht : 2001 : 9647 : prompt, Zwischenverkauf v : Italien : 32900 € : 1 : 30 to : 1250+N x 1000 mm mm : 1250 mm : 1000 mm : 40 m/Min : 30 m/Min : 50 m/Min : 30 mm : 730 1/Min : 300 1/Min : 980 mm : 4 kW : 115 l : 4000 mm : 2800 mm : 2800 mm : 4800 kg With 6-way multitool holder MTE6 (max. Dm. 24 mm) 2 Clamping claws Table with Brushes, table dimension 1970 x 2260 mm Foot pedal 2 pcs. additional single matrix holders PC with Euromac Software Eurowin 8.36 Max. Punching force 300 kN Automatic repositioning up to 10.000 mm Max. Punching diameter for single tool 88,9 mm, Max. Punching diameter Multitool Holder MTE6 Dm. 24 mm Max. Opening the clamping claws 7 mm Transport width: 2350 mm User Manual in english and italian CE declaration available WITH LARGE TOOL PACKAGE several pieces of each of the following dimensions: Round: Dm. 2,5/2,8/3/3,12/3,2/3,5/3,9/4,1/4/4,5/5/5,2/5,5/6/7/7,5/ ...

Punch, punching machine, hole punch, eccentric punch -Manufacturer: Peddinghaus, hole punch -Type: 225B/45 -Pressure force: 45 ton. -Punching performance: see photo nameplate -Projection: 360 mm -Accessories: incl. punching tool and 2nd table, see photos -Dimensions: 1540/700/H1510 mm -Weight: 1410 kg

- Paper from 80 g/m2, cardboard up to 2000 g/m2, - Corrugated board E, B flute, up to 4 mm thickness - Sheet format max. 740×1050 mm - Sheet format min. 350 x 400 mm - Punching pressure: 260 t / 2.6 MN - Output max. 9000 sheets/hour - Touch screen panel - Punching, creasing, perforating, embossing, stripping - Totalizer: 12,3 mio.

WE ARE SELLING AN NICE CONDITION TRUMPF ROTATION. MACHINE IS READY FOR USE. MACHINE INCLUDES ALSO TOOL GRINDER AND EXISTING TOOLS FOR CUSTOMER WE ORGANIZE TRANSPORT AND DISMANTLING AS WELL

Technical parameters: - max. capacity: 20 t - max. sheet thickness for punching: 6 mm - max. sheet thickness for punching: 4 mm - max. stroke for punching: 25 mm - max. sheet weight at max. speed: 100 kg - table working height: 980 mm - table width: 2400 x 3600 mm - engine: 7.5 kW - number of tools in Multimatrix: 6 - basic tools included in the price of the machine - axis movement: X 2000 mm Y 1250 mm - axis speed: X 90 m/min Y 70 m/min Control system: Siemens Sinumerik 840 DI Machine dimensions (L x W x H): 3600 x 4100 x 2450 mm Machine weight: 11,100 kg The machine is in very good condition.

FinnPower SG5, turret punching machine FMS-system for punching of sheet metal blanks, with integrated power shears, loading and sorting system (by conveyer belts, no stacking possibility) Maximum sheet size: 2 500 x 1 250 [mm] Maximum punch force: 300 [kN] Tooling: Mate tool holder Number of tools: 25 tools in turret, A-D station (Mate Standard) Index tooling: Yes, for specific stations Multitool possibility: Yes Year of manufacturing: 1997

- Presses with a single rotating head with a universal C-shaped bed. — High speed and simplicity of operations. - Steel welded construction, stress relieved. - The system can be connected to a local network, the machine is equipped with a UPS. — The mobile unit control panel+monitor makes the operation of the machine more comfortable and efficient. - Powerful Siemens Sinumerik 840 DSL controller with user-friendly CAD-CAM software. — Hydraulic and electronic components of high quality from trusted manufacturers. — Precision hydraulic components Bosch Rexroth HNC -100 and Siemens drives allow positioning with high accuracy (up to 0.1 mm). Siemens Sinumeriks unique user-oriented system ensures clear and simple program control.

The TRUMPF TRUMATIC 120 Rotation punching machine was built by the well-known German company TRUMPF in 1991. The compact sheet metal processing center enables profiling, punching and sheet forming. The CNC control of the machine uses a graphical interface to program the rotation of all tools. Technical data of the TRUMPF TRUMATIC 120 Rotation punching machine: Performance : - punching force: 15 t (150 kN) - maximum sheet thickness: 4 mm - maximum workpiece weight: 64 kg - maximum punching diameter: 38 mm Speeds: - maximum speed of a single axis: 40 m / min. - maximum speed of two axes simultaneously (XxY): 56 m / min. - rotary axis: 360 degrees / s, full rotation - maximum number of strokes: 320 l / min. Drive type: - X / Y / Z axis: AC motors, maintenance-free - punching: hydraulic drive Control system: TRUMAGRAPH CC 200 Accuracy: - the smallest programmable m ...

Equipment for stamping sheet material produced by Amada is on sale. Machine Vipros 358 King was produced in 1999 in Japan, force 30 t, revolver 58 stations with 4 auto index, brush table type, processing area 1270x4000 mm, maximum sheet thickness 3.2 mm. The equipment was serviced by an official AMADA dealer. The machine is equipped with basic tools and software AMADA and METALIX.

The machine has: -3 punching heads with quick-change tool system -fast tool change -2 sheet clamps - use of all types of punching and forming tools of the Trumpf standard - X-axis 0-3000 Y-axis 0-1250 - positioning speed of the axes 60 meters per minute, positioning accuracy 0.05 mm -automatic height adjustment of the tool stroke Specifications: punching force - 28 t adjustable height of striker stroke - for one stroke 105 mm maximum punching diameter - 90mm maximum thickness of the processed material - 6 mm

Technical data: X axis movement: mm 1000 Y axis movement: mm 1000 Punching power: 15 t Max X axis positioning speed: m/min 40 Max Y axis positioning speed: m/min 40 Max simultaneous speed: m/min 56 Automatic Tool Changer: Stk 9 Number Of Stroke: 1/min 320 Control: Bosch Trumagraph CC 220S Max. Sheet Thickness: mm 4 Max. Tool Diameter: mm 38 Weight: Kg 4300 Color: White Blue Dimension approx. : Length: 3800 mm Width: 4600 mm Height: 1820 mm Configuration: Automatic Tool Changer Stk 9 Safety barriers

- Punching capacity: 300 KN - Area of work without replacement: 750 x 1250 - Area working with replacement: 750 x 2500 - Maximum thickness of material: 6 mm - Number of strokes per minute: 165 - Total weight of machine: 3920 kg - Machine dimensions (W x L x H): 2800 x 2260 x 1800 - Maximum pressure: 300 KN - Y axis stroke with multitool: 1000 mm - Y axis strike in monopunch: 800 mm - X axis stroke: 1250 mm - Automatic repositioning: Up to 10,000 mm - Y axis speed: 30 m / min - 1250 X axis speed: 40 m / min - 2000 X axis speed: 50 m / min - Speed X + Y 1250 tour: 50 m / min - Speed X + Y 2000 tour: 60 m / min - Maximum weight of the sheetmetal: 80 Kg

Machine name: EUROMAC Type: CX 1000/30 CNC - 2000 Manufacturer: SP-Tech s.r.o. Nymburk Year of manufacture: r.v. 2000 Weight: 6 tons Condition: used Accessories: - operating instructions for the punching press - PC with pre-installed FabriWIN software for preparing punch press programs (supports DXF) - a large set of punches and matrices (square, rectangular and circular profiles of more than 80,000 diameters) Specific technical parameters: (see Annex CX 1000/30 CNC - 2000) The machine is ready to ship. Dismantling and disconnection from the current made on 21.2.2019 Price including matrices and punches and specified accessories

Pega 244 is an extremely compact turret CNC punching machine with considerable punching power, ideal for processing medium format sheet metal. Punching capacity: 20 tons Working range with repositioning: 1000x2000mm Max thickness: 6mm Hydraulic brake and hydraulic clutch Characteristics of the CNC: Fanuc Amadam COMPLETE WITH CUSTOM MADE SOUNDPROOFING CABIN

not connected, in stock the laser is leaking, the laser is defective, not working. the machine is sold as a punching machine, not as a combi. punch in good condition. Control…………………………â� �¦â€¦â€¦â€¦â€¦â€¦â€¦â€¦â€¦â€¦â€¦â€¦� �€¦.…………………………†¦â€¦â€¦..Bosch PNC-P Working sheet format…………………………†¦â€¦â€¦â€¦â€¦â€¦â€¦â€¦â€¦â€¦â€¦â€¦â €¦â€¦â€¦â€¦â€¦â€¦â€¦â€¦. 2500 x 1250 Maximum diameter…………………………⠀¦â€¦â€¦â€¦â€¦â€¦â€¦â€¦â€¦â€¦â€¦â€¦ ………………….76.2 mm Impact force……………………… ...

Power in tons 20 T Metal length 1275.0 mm CNC type MNC 4000 Metal width 1025.0 mm Max steel thickness 6.4 mm Many accessories/tools come along with machine User manuel and documentations are available

Durma TP123 CNC Punch Machine 30 Ton including tools Machine is like new condition

Durma turret punching machine, type PP 12530. Technical data: Max pressure 300 kN (30 T) Max sheet thickness (for carbon steel) 6 mm Max sheet thickness (for stainless steel) 4 mm Max X axis travel 2000 mm + Automatic Reposition Max Y axis travel (MUTLITOOL) 1250 mm Max Y axis travel (one tool) 1280 mm Automatic positioning range up to 10,000 mm Max number of strokes (nibbling) 600 / min Number of terminals 2 pcs. Gripping force 1000 kg Working height 980 mm Table dimensions 2400 x 3600 mm Max tool diameter in the MULTITOOL head 24 mm Maximum diameter of a single tool 88.9 mm 7.5 kW power Oil tank capacity 160 l Machine dimensions 3600 × 4100 × 2450 mm Weight 8,600 kg Equipment of the PP 12530 punching machine: SIEMENS SINUMERIK 840Di control; MUTITOOL 6 head for tools; Brush table; Automatic control of the correct position of the clamps; Automati ...

GEKA hydraulic punching and shearing machine Model HYDRACROP 80 SD Characteristics Punching power ton 80 Extra gooseneck (SD) mm 500 Punching capacity steel 42 kg/mm² mm Ø 40 x 14 - Ø 24 x 24 Shearing capacity flat iron mm 450 x 15 - 300 x 20 Shearing capacity L mm 130 Shearing capacity U and I (special blades) mm 140 Shearing capacity round mm 45 Shearing capacity square mm 45 Notching capacity mm 90 x 42 x 12 Adjustable stroke for shearing and punching stations mm 0 to 70

Durma PP 1250x30 CNC Punching Machine Maximum steel thickness : 6 mm Stroke : 30 mm Number of stroke per minute : 600 Max X axis 2000 mm movement+Automatic reposition Mad Y axis movement (MUTLITOOL) 1250 mm Metalix control Table size 2400 x 3600 mm Metalix program Many tools are included Machine is in very good condition