plastic moulding machine used for sale

max. wheel diameter: 1600 mm gear width: 250 mm max. module: 20 min. module: 1,5 base circle dia. - max.: 1450 mm base circle dia. - min.: 150 mm specimen weight from/to: 4000 kg feeler adjustment movement - parallel: 1400 mm max.helical angle: 0 - 90 ° wheel diameter with counterstay: 1000 mm feeler adjustment movement - parallel: 800 mm centre height: 1150 mm electrics - voltage/frequency: 400 / 50 V/Hz dimensions of the machine ca.: 2,8 x 2,4 x 2,3 m total power requirement: 2 kW weight of the machine ca.: 3 t Universal Involute and Helix Testing Machine - modernized 1995 Machine is suitable for measuring all individual tooth data on straight and helical spur gears, and shaping and shaving cutters. Following tooth data can be tested: Tooth flanks, Involute base circle dia. and pressure angle, Profile c ...

bore diameter: 550 mm Spindle diameter: 100 mm bore depth: 320 mm turning speeds: 10 70 U/min feed stepless: 0 - 12 mm/min voltage: 380 V / 50 Hz total power requirement: 3 kW weight of the machine ca.: 1.35 t dimensions of the machine ca.: 1,0 x 2,5 x 1,0 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 105 mm x-travel: 1200 mm y-travel: 1000 mm z-travel: 325 mm adjustment of cross-rail: 785 mm distance between columns: 1600 mm distance spindle - column min./max.: 215 / 1100 mm spindle feeds - stepless: 1 - 6000 mm/min spindle taper: ISO 40 spindle turning speed - stepless: 40 - 1800 U/min table surface area: 900 x 1500 mm workpiece weight: 2000 kg spindle drive: 5 kW total power requirement: KVA weight of the machine ca.: 6 t dimensions of the machine ca.: 3,3 x 3,0 x 2,8 m dimensions of the machine ca.: 3,3 x 3,0 x 2,9 m • with RENISHAW -detector OMP 40, • mechanical refurbishing and new control HEIDENHAIN TNC 410 in year 2002 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine vice, sturdy vice, drill press vice -Machine vice: rotatable -Clamping jaws 200 x 55 mm -Clamping depth: 200 mm -Dimensions: 510/228/H190 mm -Weight: 64 kg

Machine Reamers, Reamer, Reaming Tool, Passknife Cutting Set -Machine reamer: Reamer with holder -Diameter: Ø 59 mm -Holder: DIN 219 MK5 -Total dimensions: Ø 59 x 442 mm -Weight: 5.6kg

Milling machine, universal milling machine, tool milling machine, two-spindle milling machine, milling machine -Milling machine: Two-spindle milling machine for small parts -Dimensions: see photos -Drive: 0.37 kW each -Coolant device -Dimensions: 1000/850/H1360 mm -Weight: 352 kg

x-travel: 150 mm y-travel: 300 mm z-travel: 350 mm table surface area: 350 x 200 mm spindle turning speed range: 475 - 20000 U/min total power requirement: 0,4 kW weight of the machine ca.: 0,46 t dimensions of the machine ca.: 1,2 x 1 x 1,4 m • without templates The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

workpiece length: 3250 mm swing diameter: 630 mm grinding wheel diameter: 900 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Serveral Steadies Dresser Cooland System The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 10500 mm y-travel: 2750 mm y-travel: (3350) mm z-travel: 1500 mm turning speeds: 3500 U/min Tool changer: 80 Control: Heidenhain TNC 430 M positioning accuracy: 1 ° milling-head swivable +/-: CNC Plate area: 12000x2500 mm chip conveyor: spindle taper ISO: 50 Spindle capacity: 37 KW Feed: 6000 mm/min Rapid movement: 15000 mm/min total power requirement: kW weight of the machine ca.: 65 t dimensions of the machine ca.: 18,1x6,7 m CNC angle head 360 ° with 1 ° Hirtverzahnung spindle hours 13500 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Steel stairs, external stairs, machine stairs, machine ascent, extension stairs -Machine stairs: stable design, as machine access -Material: VA -Step height: approx. 310 mm -Height: upper step approx. 1680 mm -Transportation dimensions.: 1770/535/H190 mm -Weight: 29 kg

Machine vise, heavy duty vise, drill press vise -Machine vise: rotatable -Clamping jaws 200 x 40 mm -Clamping depth: 300 mm -Dimensions: 630/325/H200 mm -Weight: 82 kg

x-travel: 1800 mm y-travel: 1000 mm z-travel: 1000 mm table surface area: 1000x1000 mm turning speeds: 4000 U/min head swivability: 90 ° Tool changer: 45 chip conveyor: control: Heidenhain type: total power requirement: kW weight of the machine ca.: t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 2000 mm gear width: . mm max. module: 22 max. hob diameter: 250 mm hob turning speeds: 16-92 U/min total power requirement: 13 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 8 , 600 , 230

High-performance industrial planing machine In good condition, lots of accessories '

Dowson bread slicer Model: B51C Fully automatic bread slicer, Constructed to handle a variety of loaves, up to 100 loaves per minute, comes with two different cutting heads, overall length 2800mm, 3Ph

Machine vice, sturdy vice, drill press vice -Machine vice: rotatable -Clamping jaws 265 x 70 mm -Clamping depth: 285 mm -Dimensions: 620/300/H210 mm -Weight: 81 kg

Lamination Machine

Bore diameter: , Number of heads horizontal: , Number of heads vertical: , The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bore diameter: variabel mm Number of heads horizontal: 3 St. Number of heads vertical: 4 St. Götzinger Power Drill in special version with dübelleim and press-in station With the Götzinger PowerDrill, you can choose: - Drill the front and long sides - Doweling of doors, seatings, fighters - The drilling patterns are freely programmable - You can: Grip handle and corner bearing, with quick-change Multi-spindle drilling heads - You can: lock casings, pusher and PZ as well as 3D tapes and drill - The machine has a horizontal and a vertical milling unit - A simple control lets you create drilling and milling programs, Save and recall POWER DRILL - drilling and milling machine Universal drilling machine for drilling olives, corner bearings, dowel work On the front and the front, milling, lock boxes, tapes, etc. Base in stable design, covered with sheet metal Table top 1800 x 200 mm  ...

Bending tool, die, lower knife, lower tool, lower jaw -Bending tool: from Lotze HDZK swivel bending machine -Widthen: for lower cheek -Dimensions: 2487 x 100 x 15 mm / 190 x 100 x 15 mm -Hole spacing: 100 x 18 mm -Transport dimensions: 2487/100/H30 mm -Total weight: 29.4 kg

Bending tool, die, upper blade, upper tool, upper jaw -Bending tool: from Lotze HDZ swivel bending machine -Length 2678 mm -Hole spacing: 100 mm / M10 -Dimensions: see drawing in the photos -Dimensions: 2678/15/H57 mm -Total weight: 15.7 kg

Motor output: , kW automatic: , Table dimensions: , mm ! Please notice the VIDEO of this unit ! For window producers we recommend a spinde with 40 mm diameter and 160 mm usable length, Tools should have inside diameter of 110 to 120 mm Attached the description with options as pdf-file. Price list on request! For window production the manufacturer recommends following options of price list: Art.-Nr.bo1000 base unit Art.-Nr.bo1050 protection Art.-Nr.bk0180 arc marker Art.-Nr.gt0250 glazing bead construction 1 lengthenning : bo1720 ot bo2510. (technical details according to manufacturer - without guarantee!) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of boring motors: 1 St. boring of corner bearing 1=yes, 0=no: 0 nein boring of olive 1=yes, 0=no: 1 ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Table dimensions: - mm Motor output: 7,5 kW Spindle diameter: 40 mm reus: 6000 U/min Weight: 300 kg Year: 2018 Universal profiler Götzinger UP 1730 Machine for frontal and cross-side machining. Different application technology for wood products First-class surface quality of machined workpieces due to high speed, Particularly stable bearing of the milling shaft and through synchronous milling. Rapid tool change through one-sided mounted cutter shaft and through swiveling clamping device. The whole work process, such as clamping, pneumatic-hydraulic table feed with speed control (stepless) and fast reverse. By exchanging the milling segments and by changing the attachment points can be up to ten different with a single profile milling set Create profile companies. Technical specifications: Cutting depth max .: 30 mm Milling height max .: 150 mm Voltage cross section per stroke max. Softw ...

Bending tool, matrix, upper knife, upper tool, upper beam -Bending tool: from Lotze HDZ swivel bending machine -Length 2678 mm -Hole spacing: 100mm M10 -Dimensions: see the drawing in the photos -Dimension: 2678/6/H45 mm -Total weight: 5,6 kg

Counter holder, counter bearing, bearing block, pillow block bearing, bearing for milling machine -Abutment: for milling machines -Dovetail: 220 to 165 mm -Bore: Ø 85 mm -Dimensions: tech. Drawing with the photos -Dimensions: 400/145/H290 mm -Weight: 13.5 kg

TIG welding machine -Nimak electrode unit -Dalex converter -Hose package -ground cable

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Manufacturer: Haffner, milling motor type M 30 -Power: 300 W 17000 rpm -Voltage: 200 V 300 Hz -Dimensions: 240/70/90 mm -Weight: 2.5 kg

Number of boring motors: 1 St. boring of corner bearing 1=yes, 0=no: 1 boring of olive 1=yes, 0=no: 1 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 1,6 mm pressure: 450 MPa : 150 x 150 x 90° table surface area: 650 x 500 mm : 875 mm cutting angle - upper blade: 4 ° weight of the machine ca.: 75 kg • manual notching machine with lower frame • sheet thickness (steel 450MPa) to 1.6 mm, aluminium to 2.25 mm, plastic to 3.0 mm, • machine for demonstration The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Spot welding machine, spot welding system, spot welding gun, resistance spot welding machine, lever-action spot welding machine -Manufacturer: Tecna, Spot welding machine: Type 4161 -Rated power: 31 kVA -Operation: via foot pedal -Dimensions: 780/250/H1500 mm -Weight: approx. 130 kg

machine vice, stable vice, drill press vice, drilling vice -Manufacturer: Fortis, machine vice drilling machine vice -Clamping jaws: 100 x 45 mm -Clamping depth: 75 mm -Dimensions: 230/140/H60 mm -Weight: 2.7 kg

Bending tool, die, upper knife, upper tool, straight tool, upper beam -Bending tool: for folding machine -Tool angle: 45° -Dimensions: see the drawing in the photos -Dimension: 47 x 11mm -Length: 945mm -Weight: 3.5 kg

x-travel: 600 mm y-travel: 400 mm z-travel: 400 mm spindle taper ISO: 40 spindle turning speed range: 80 - 4000 U/min transmission ratio: 18 feed range: 0,1 - 2000 mm/min rapid traverse: x = 4 / y = 3 / z = 5 m/min table load capacity: 250 kp voltage: 380 V / 50 Hz spindle drive: 5,5 kW total power requirement: 16 kVA weight of the machine ca.: 2,6 t dimensions of the machine ca.: 3,8 x 4,3 x 2,0 m • CNC-control system 432 E • Operating hours: 37719 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Gate Sharper Manufacturer Vollmer for Inclined and straight ground

Bore diameter: , mm Number of heads horizontal: , St. Number of heads vertical: , St. SPINAMATIC mod. GLF-HP Dübeleintreibgerät mit Leimangabe für Fensterfertigung ---------------------------------------------------------------- komplett wie folgt : - Fahrbare Ausführung - Dübelzuführung zur Pistole wird durch SPS-Steuerung gesteuert. - 1 Wendelförderer zur Aufnahme von Dübeln mit 1 Zuführung - Leimanlage ist mit Hoch-Druckpumpe 10:1 und Sonderleimspritzdüse für Dickleim (Typ D3 oder D4-Einkomponent) augerüstet - pneumatische Pistole für Dickleim- und Dübeleinsetzen mit Ausrüstungen für nur einen Dübeldurchmesser nach Wahl zwischen : 6 - 8 – 10 oder 12 mm. Dübellänge : min. 25 mm. – max. 60 mm. Tiefeinsetzen = 30 mm. Der Leim wird durch eine Sonderleimspritzdüse, die mit SPS-Steuerung für elektronische Dosierung in Verbindung ist, gespritzt . - Flexibler Arm mit  ...

Machine vise, heavy duty vise, drill press vise -Handover: in the current condition as seen -Base plate: See photos for damage -Machine vice: rotatable, clamping jaws 160 x 40 mm -Clamping depth: 185 mm -Dimensions: 445/225/H145 mm -Weight: 33 kg

Flame cutting machine, torch, oxy-fuel cutting machine -Shaft diameter: 28mm - Shaft length: 200mm - Rack length: 140 mm -Total length: 320mm -Socket diameter: 42 mm -Weight: 2 kg

Spray machine -Closing force: 25 tons -Screw diameter: 22 mm -Unilog 2040 control unit -Slat spacing: 250x250 mm -Data collection terminal -Parts removal device, manufacturer ASS -Temperature control unit, manufacturer Single

Belt Strapping Machine Strap Strapping Device Manufacturer Mosca Verpackungstechnik Maschinenfabrik Gerd Mosca GmbH 69429 Waldbrunn Type RO-TR500-4 Year of construction 2001 Current connection 3 AC 400 Volt Current consumption 1.5kW 50Hz 2.5A PLC Siemens Simatic OP7 The machine can work both manually and automatically. The conveyor belt brings the packaged goods to the right place and the machine then strapping. Operating states Machine An automatic Open a frame Cut off tape

Inert gas welding machine, arc welding system, MIG/MAG welding system -Manufacturer: Ess, inert gas welding machine MIG-MAG 520-2 MW -Type: 520-2MW -Max. Welding power: 500 A -Water cooled -Wire feed case: ESS DVK 17 -Dimensions: 1160/500/H1220 mm -Weight: 379 kg

Inert gas welding machine, arc welding system, MIG/MAG welding system -Manufacturer: Ess, inert gas welding machine MIG-MAG type 310 MW -Max. Welding power: 310 A -Water cooled -Wire feeder: ESS PS 12-8 -Accessories: including hose package, ground cable -Dimensions: 1020/480/H910 mm -Weight: 208 kg

Number of boring spindles: 1 St. Boring depth max.: 150 mm Motor output: 1,8 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 40 mm throat: 370 mm bore stroke: 200 mm spindle taper MT: 4 MK table:: 580 x 460 mm column diameter: 160 mm turning speeds: 75 - 2020 U/min feeds: 0,1 - 0,2 - 0,3 - 0,4 mm/U total power requirement: 1,5 kW weight of the machine ca.: 700 kg. range L-W-H: 1,1 x 0,6 x 2,35 mm • machine base for clamping high workpieces • Digital Depth Gauge • Gearbox swivels 180 ° • silent running through geärtete, ground oil-cooled gears • Tapping Function • electromagnetic clutch for drill feed • automatic feed • electric drive for table height adjustment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 16 mm throat: 170 mm bore stroke: 50 mm : 16 mm spindle taper: MK2 spindle turning speed range: 50 - 2250 U/min : 320 mm : 145 mm table surface area: 500 x 140 mm connected load frequency: 230 V total power requirement: 0,5 kW weight of the machine ca.: 90 Kg dimensions of the machine ca.: 0,5 x 0,45 x 0,84 m Drilling and milling machine with - variable spindle speed - Digital depth display - Left / right switch - Cross support - swiveling spindle head - Feeds via hand crank - Tool case with content but without digital display The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1000 mm plate thickness: 5,0 mm distance between columns: 1070 mm diameter of upper rolls: 130 mm total power requirement: 4,0 KW weight of the machine ca.: 1,15 t dimensions of the machine ca.: 2,55 x 0,65 x 1,1 mm - Electrically adjustable rear roller - Electrically adjustable lower roll (material clamping) - Digital readout for rear roller movement - Digital readout for lower roll movement (material clamping) - Hardened rolls - Conical rolling - Swiveling top roll - Brake motor - Emergency stop - Documentation - 400V The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Lid folding machine, folding machine, folding machine, lid folding machine, can folding machine, can folding machine -Lid seaming machine for sheet metal buckets -The machine creates the fold for the lid -Dimensions: 1000/1200/H1150 mm -Weight: approx. 800 kg

Machine light, machine lamp, workspace light, recessed light -Manufacturer: SBF, recessed light 24V / 7W unused -Type: P002800 -Connection: LED plug -Quantity: 24x lights available -Price per piece -Dimension: 730/45/H37 mm -Weight: 0.7 kg/piece

x-travel: 1000 mm y-travel: 300 mm z-travel: 400 mm table-size: 1320 x 360 mm spindle taper ISO: 40 spindle turning speed range: 58 - 1800 U/min total power requirement: 4 kW weight of the machine ca.: 2,3 t dimensions of the machine ca.: 2,1 x 2,1 x 1,95 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding range: 2 - 20 mm sharp cornered angle min./max.: 90 - 135 Grad connected load: 230 V weight of the machine ca.: 8,6 Kg dimensions of the machine ca.: 0,35 x 0,2 x 0,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.